iio: ak8975: minor fixes

Fixes code duplication, return of function.
Check client->irq properly when setting up optional irq handler.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/magnetometer/ak8975.c

@@ -64,10 +64,10 @@
 #define AK8975_REG_CNTL			0x0A
 #define AK8975_REG_CNTL_MODE_SHIFT	0
 #define AK8975_REG_CNTL_MODE_MASK	(0xF << AK8975_REG_CNTL_MODE_SHIFT)
-#define AK8975_REG_CNTL_MODE_POWER_DOWN	0
-#define AK8975_REG_CNTL_MODE_ONCE	1
-#define AK8975_REG_CNTL_MODE_SELF_TEST	8
-#define AK8975_REG_CNTL_MODE_FUSE_ROM	0xF
+#define AK8975_REG_CNTL_MODE_POWER_DOWN	0x00
+#define AK8975_REG_CNTL_MODE_ONCE	0x01
+#define AK8975_REG_CNTL_MODE_SELF_TEST	0x08
+#define AK8975_REG_CNTL_MODE_FUSE_ROM	0x0F
 
 #define AK8975_REG_RSVC			0x0B
 #define AK8975_REG_ASTC			0x0C
@@ -231,8 +231,12 @@ static int ak8975_setup(struct i2c_client *client)
 				AK8975_REG_CNTL_MODE_POWER_DOWN,
 				AK8975_REG_CNTL_MODE_MASK,
 				AK8975_REG_CNTL_MODE_SHIFT);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error in setting power-down mode\n");
+		return ret;
+	}
 
-	if (data->eoc_gpio > 0 || client->irq) {
+	if (data->eoc_gpio > 0 || client->irq > 0) {
 		ret = ak8975_setup_irq(data);
 		if (ret < 0) {
 			dev_err(&client->dev,
@@ -241,11 +245,6 @@ static int ak8975_setup(struct i2c_client *client)
 		}
 	}
 
-	if (ret < 0) {
-		dev_err(&client->dev, "Error in setting power-down mode\n");
-		return ret;
-	}
-
 /*
  * Precalculate scale factor (in Gauss units) for each axis and
  * store in the device data.
@@ -550,24 +549,18 @@ static int ak8975_probe(struct i2c_client *client,
 	/* Perform some basic start-of-day setup of the device. */
 	err = ak8975_setup(client);
 	if (err < 0) {
-		dev_err(&client->dev, "AK8975 initialization fails\n");
+		dev_err(&client->dev, "%s initialization fails\n", name);
 		return err;
 	}
 
-	data->client = client;
 	mutex_init(&data->lock);
-	data->eoc_gpio = eoc_gpio;
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->channels = ak8975_channels;
 	indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
 	indio_dev->info = &ak8975_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->name = name;
-	err = devm_iio_device_register(&client->dev, indio_dev);
-	if (err < 0)
-		return err;
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id ak8975_id[] = {
@@ -588,7 +581,7 @@ MODULE_DEVICE_TABLE(of, ak8975_of_match);
 static struct i2c_driver ak8975_driver = {
 	.driver = {
 		.name	= "ak8975",
-		.of_match_table = ak8975_of_match,
+		.of_match_table = of_match_ptr(ak8975_of_match),
 		.acpi_match_table = ACPI_PTR(ak_acpi_match),
 	},
 	.probe		= ak8975_probe,