drm/i915/skl: Fix the CTRL typo in the DPLL_CRTL1 defines

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -295,7 +295,7 @@ struct intel_dpll_hw_state {
 	/* skl */
 	/*
 	 * DPLL_CTRL1 has 6 bits for each each this DPLL. We store those in
-	 * lower part of crtl1 and they get shifted into position when writing
+	 * lower part of ctrl1 and they get shifted into position when writing
 	 * the register.  This allows us to easily compare the state to share
 	 * the DPLL.
 	 */

drivers/gpu/drm/i915/i915_reg.h

@@ -7141,16 +7141,16 @@ enum skl_disp_power_wells {
 #define DPLL_CTRL1		0x6C058
 #define  DPLL_CTRL1_HDMI_MODE(id)		(1<<((id)*6+5))
 #define  DPLL_CTRL1_SSC(id)			(1<<((id)*6+4))
-#define  DPLL_CRTL1_LINK_RATE_MASK(id)		(7<<((id)*6+1))
-#define  DPLL_CRTL1_LINK_RATE_SHIFT(id)		((id)*6+1)
-#define  DPLL_CRTL1_LINK_RATE(linkrate, id)	((linkrate)<<((id)*6+1))
+#define  DPLL_CTRL1_LINK_RATE_MASK(id)		(7<<((id)*6+1))
+#define  DPLL_CTRL1_LINK_RATE_SHIFT(id)		((id)*6+1)
+#define  DPLL_CTRL1_LINK_RATE(linkrate, id)	((linkrate)<<((id)*6+1))
 #define  DPLL_CTRL1_OVERRIDE(id)		(1<<((id)*6))
-#define  DPLL_CRTL1_LINK_RATE_2700		0
-#define  DPLL_CRTL1_LINK_RATE_1350		1
-#define  DPLL_CRTL1_LINK_RATE_810		2
-#define  DPLL_CRTL1_LINK_RATE_1620		3
-#define  DPLL_CRTL1_LINK_RATE_1080		4
-#define  DPLL_CRTL1_LINK_RATE_2160		5
+#define  DPLL_CTRL1_LINK_RATE_2700		0
+#define  DPLL_CTRL1_LINK_RATE_1350		1
+#define  DPLL_CTRL1_LINK_RATE_810		2
+#define  DPLL_CTRL1_LINK_RATE_1620		3
+#define  DPLL_CTRL1_LINK_RATE_1080		4
+#define  DPLL_CTRL1_LINK_RATE_2160		5
 
 /* DPLL control2 */
 #define DPLL_CTRL2				0x6C05C

drivers/gpu/drm/i915/intel_ddi.c

@@ -870,26 +870,26 @@ static void skl_ddi_clock_get(struct intel_encoder *encoder,
 	if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) {
 		link_clock = skl_calc_wrpll_link(dev_priv, dpll);
 	} else {
-		link_clock = dpll_ctl1 & DPLL_CRTL1_LINK_RATE_MASK(dpll);
-		link_clock >>= DPLL_CRTL1_LINK_RATE_SHIFT(dpll);
+		link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll);
+		link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll);
 
 		switch (link_clock) {
-		case DPLL_CRTL1_LINK_RATE_810:
+		case DPLL_CTRL1_LINK_RATE_810:
 			link_clock = 81000;
 			break;
-		case DPLL_CRTL1_LINK_RATE_1080:
+		case DPLL_CTRL1_LINK_RATE_1080:
 			link_clock = 108000;
 			break;
-		case DPLL_CRTL1_LINK_RATE_1350:
+		case DPLL_CTRL1_LINK_RATE_1350:
 			link_clock = 135000;
 			break;
-		case DPLL_CRTL1_LINK_RATE_1620:
+		case DPLL_CTRL1_LINK_RATE_1620:
 			link_clock = 162000;
 			break;
-		case DPLL_CRTL1_LINK_RATE_2160:
+		case DPLL_CTRL1_LINK_RATE_2160:
 			link_clock = 216000;
 			break;
-		case DPLL_CRTL1_LINK_RATE_2700:
+		case DPLL_CTRL1_LINK_RATE_2700:
 			link_clock = 270000;
 			break;
 		default:
@@ -1294,13 +1294,13 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
 
 		switch (intel_dp->link_bw) {
 		case DP_LINK_BW_1_62:
-			ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810, 0);
+			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0);
 			break;
 		case DP_LINK_BW_2_7:
-			ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350, 0);
+			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0);
 			break;
 		case DP_LINK_BW_5_4:
-			ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700, 0);
+			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
 			break;
 		}
 
@@ -1854,7 +1854,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 
 			val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) |
 				 DPLL_CTRL1_SSC(dpll) |
-				 DPLL_CRTL1_LINK_RATE_MASK(dpll));
+				 DPLL_CTRL1_LINK_RATE_MASK(dpll));
 			val |= crtc->config->dpll_hw_state.ctrl1 << (dpll * 6);
 
 			I915_WRITE(DPLL_CTRL1, val);
@@ -2100,7 +2100,7 @@ static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv,
 	val = I915_READ(DPLL_CTRL1);
 
 	val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) | DPLL_CTRL1_SSC(dpll) |
-		 DPLL_CRTL1_LINK_RATE_MASK(dpll));
+		 DPLL_CTRL1_LINK_RATE_MASK(dpll));
 	val |= pll->config.hw_state.ctrl1 << (dpll * 6);
 
 	I915_WRITE(DPLL_CTRL1, val);

drivers/gpu/drm/i915/intel_display.c

@@ -6467,10 +6467,10 @@ static int skylake_get_display_clock_speed(struct drm_device *dev)
 		return 540000;
 
 	linkrate = (I915_READ(DPLL_CTRL1) &
-		    DPLL_CRTL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
+		    DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
 
-	if (linkrate == DPLL_CRTL1_LINK_RATE_2160 ||
-	    linkrate == DPLL_CRTL1_LINK_RATE_1080) {
+	if (linkrate == DPLL_CTRL1_LINK_RATE_2160 ||
+	    linkrate == DPLL_CTRL1_LINK_RATE_1080) {
 		/* vco 8640 */
 		switch (cdctl & CDCLK_FREQ_SEL_MASK) {
 		case CDCLK_FREQ_450_432:

drivers/gpu/drm/i915/intel_dp.c

@@ -1098,30 +1098,30 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
 	ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
 	switch (link_clock / 2) {
 	case 81000:
-		ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
+		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
 					      SKL_DPLL0);
 		break;
 	case 135000:
-		ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350,
+		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350,
 					      SKL_DPLL0);
 		break;
 	case 270000:
-		ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700,
+		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700,
 					      SKL_DPLL0);
 		break;
 	case 162000:
-		ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1620,
+		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620,
 					      SKL_DPLL0);
 		break;
 	/* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
 	results in CDCLK change. Need to handle the change of CDCLK by
 	disabling pipes and re-enabling them */
 	case 108000:
-		ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1080,
+		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
 					      SKL_DPLL0);
 		break;
 	case 216000:
-		ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2160,
+		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160,
 					      SKL_DPLL0);
 		break;