MIPS: Fork loongson2ef from loongson64

As later model of GSx64 family processors including 2-series-soc have
similar design with initial loongson3a while loongson2e/f seems less
identical, we separate loongson2e/f support code out of mach-loongson64
to make our life easier.

This patch contains mostly file moving works.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[paulburton@kernel.org: Squash in the MAINTAINERS updates]
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: paul.burton@mips.com

MAINTAINERS

@@ -10871,18 +10871,18 @@ F:	arch/mips/include/asm/mach-loongson32/
 F:	drivers/*/*loongson1*
 F:	drivers/*/*/*loongson1*
 
-MIPS/LOONGSON2 ARCHITECTURE
+MIPS/LOONGSON2EF ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-F:	arch/mips/loongson64/fuloong-2e/
-F:	arch/mips/loongson64/lemote-2f/
-F:	arch/mips/include/asm/mach-loongson64/
+F:	arch/mips/loongson2ef/
+F:	arch/mips/include/asm/mach-loongson2ef/
 F:	drivers/*/*loongson2*
 F:	drivers/*/*/*loongson2*
 
-MIPS/LOONGSON3 ARCHITECTURE
+MIPS/LOONGSON64 ARCHITECTURE
 M:	Huacai Chen <chenhc@lemote.com>
+M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/

arch/mips/Kbuild.platforms

@@ -17,6 +17,7 @@ platforms += jazz
 platforms += jz4740
 platforms += lantiq
 platforms += lasat
+platforms += loongson2ef
 platforms += loongson32
 platforms += loongson64
 platforms += mti-malta

arch/mips/Kconfig

@@ -453,18 +453,18 @@ config MACH_LOONGSON32
 	  the Institute of Computing Technology (ICT), Chinese Academy of
 	  Sciences (CAS).
 
-config MACH_LOONGSON64
-	bool "Loongson-2/3 family of machines"
+config MACH_LOONGSON2EF
+	bool "Loongson-2E/F family of machines"
 	select SYS_SUPPORTS_ZBOOT
 	help
-	  This enables the support of Loongson-2/3 family of machines.
+	  This enables the support of early Loongson-2E/F family of machines.
 
-	  Loongson-2 is a family of single-core CPUs and Loongson-3 is a
-	  family of multi-core CPUs. They are both 64-bit general-purpose
-	  MIPS-compatible CPUs. Loongson-2/3 are developed by the Institute
-	  of Computing Technology (ICT), Chinese Academy of Sciences (CAS)
-	  in the People's Republic of China. The chief architect is Professor
-	  Weiwu Hu.
+config MACH_LOONGSON64
+	bool "Loongson-2/3 GSx64 family of machines"
+	select SYS_SUPPORTS_ZBOOT
+	help
+	  This enables the support of Loongson-2/3 family of processors with
+	  GSx64 microarchitecture.
 
 config MACH_PISTACHIO
 	bool "IMG Pistachio SoC based boards"
@@ -1037,6 +1037,7 @@ source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
+source "arch/mips/loongson2ef/Kconfig"
 source "arch/mips/loongson32/Kconfig"
 source "arch/mips/loongson64/Kconfig"
 source "arch/mips/netlogic/Kconfig"

arch/mips/configs/fuloong2e_defconfig

@@ -15,7 +15,7 @@ CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_MACH_LOONGSON64=y
+CONFIG_MACH_LOONGSON2EF=y
 CONFIG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y

arch/mips/configs/lemote2f_defconfig

@@ -12,7 +12,7 @@ CONFIG_LOG_BUF_SHIFT=15
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_MACH_LOONGSON64=y
+CONFIG_MACH_LOONGSON2EF=y
 CONFIG_LEMOTE_MACH2F=y
 CONFIG_KEXEC=y
 # CONFIG_SECCOMP is not set

arch/mips/include/asm/mach-loongson2ef/boot_param.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
+#define __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
+
+#define SYSTEM_RAM_LOW		1
+#define SYSTEM_RAM_HIGH		2
+#define SYSTEM_RAM_RESERVED	3
+#define PCI_IO			4
+#define PCI_MEM			5
+#define LOONGSON_CFG_REG	6
+#define VIDEO_ROM		7
+#define ADAPTER_ROM		8
+#define ACPI_TABLE		9
+#define SMBIOS_TABLE		10
+#define MAX_MEMORY_TYPE		11
+
+#define LOONGSON3_BOOT_MEM_MAP_MAX 128
+struct efi_memory_map_loongson {
+	u16 vers;	/* version of efi_memory_map */
+	u32 nr_map;	/* number of memory_maps */
+	u32 mem_freq;	/* memory frequence */
+	struct mem_map {
+		u32 node_id;	/* node_id which memory attached to */
+		u32 mem_type;	/* system memory, pci memory, pci io, etc. */
+		u64 mem_start;	/* memory map start address */
+		u32 mem_size;	/* each memory_map size, not the total size */
+	} map[LOONGSON3_BOOT_MEM_MAP_MAX];
+} __packed;
+
+enum loongson_cpu_type {
+	Legacy_2E = 0x0,
+	Legacy_2F = 0x1,
+	Legacy_3A = 0x2,
+	Legacy_3B = 0x3,
+	Legacy_1A = 0x4,
+	Legacy_1B = 0x5,
+	Legacy_2G = 0x6,
+	Legacy_2H = 0x7,
+	Loongson_1A = 0x100,
+	Loongson_1B = 0x101,
+	Loongson_2E = 0x200,
+	Loongson_2F = 0x201,
+	Loongson_2G = 0x202,
+	Loongson_2H = 0x203,
+	Loongson_3A = 0x300,
+	Loongson_3B = 0x301
+};
+
+/*
+ * Capability and feature descriptor structure for MIPS CPU
+ */
+struct efi_cpuinfo_loongson {
+	u16 vers;     /* version of efi_cpuinfo_loongson */
+	u32 processor_id; /* PRID, e.g. 6305, 6306 */
+	u32 cputype;  /* Loongson_3A/3B, etc. */
+	u32 total_node;   /* num of total numa nodes */
+	u16 cpu_startup_core_id; /* Boot core id */
+	u16 reserved_cores_mask;
+	u32 cpu_clock_freq; /* cpu_clock */
+	u32 nr_cpus;
+} __packed;
+
+#define MAX_UARTS 64
+struct uart_device {
+	u32 iotype; /* see include/linux/serial_core.h */
+	u32 uartclk;
+	u32 int_offset;
+	u64 uart_base;
+} __packed;
+
+#define MAX_SENSORS 64
+#define SENSOR_TEMPER  0x00000001
+#define SENSOR_VOLTAGE 0x00000002
+#define SENSOR_FAN     0x00000004
+struct sensor_device {
+	char name[32];  /* a formal name */
+	char label[64]; /* a flexible description */
+	u32 type;       /* SENSOR_* */
+	u32 id;         /* instance id of a sensor-class */
+	u32 fan_policy; /* see loongson_hwmon.h */
+	u32 fan_percent;/* only for constant speed policy */
+	u64 base_addr;  /* base address of device registers */
+} __packed;
+
+struct system_loongson {
+	u16 vers;     /* version of system_loongson */
+	u32 ccnuma_smp; /* 0: no numa; 1: has numa */
+	u32 sing_double_channel; /* 1:single; 2:double */
+	u32 nr_uarts;
+	struct uart_device uarts[MAX_UARTS];
+	u32 nr_sensors;
+	struct sensor_device sensors[MAX_SENSORS];
+	char has_ec;
+	char ec_name[32];
+	u64 ec_base_addr;
+	char has_tcm;
+	char tcm_name[32];
+	u64 tcm_base_addr;
+	u64 workarounds; /* see workarounds.h */
+} __packed;
+
+struct irq_source_routing_table {
+	u16 vers;
+	u16 size;
+	u16 rtr_bus;
+	u16 rtr_devfn;
+	u32 vendor;
+	u32 device;
+	u32 PIC_type;   /* conform use HT or PCI to route to CPU-PIC */
+	u64 ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */
+	u64 ht_enable;  /* irqs used in this PIC */
+	u32 node_id;    /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
+	u64 pci_mem_start_addr;
+	u64 pci_mem_end_addr;
+	u64 pci_io_start_addr;
+	u64 pci_io_end_addr;
+	u64 pci_config_addr;
+	u32 dma_mask_bits;
+} __packed;
+
+struct interface_info {
+	u16 vers; /* version of the specificition */
+	u16 size;
+	u8  flag;
+	char description[64];
+} __packed;
+
+#define MAX_RESOURCE_NUMBER 128
+struct resource_loongson {
+	u64 start; /* resource start address */
+	u64 end;   /* resource end address */
+	char name[64];
+	u32 flags;
+};
+
+struct archdev_data {};  /* arch specific additions */
+
+struct board_devices {
+	char name[64];    /* hold the device name */
+	u32 num_resources; /* number of device_resource */
+	/* for each device's resource */
+	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+	/* arch specific additions */
+	struct archdev_data archdata;
+};
+
+struct loongson_special_attribute {
+	u16 vers;     /* version of this special */
+	char special_name[64]; /* special_atribute_name */
+	u32 loongson_special_type; /* type of special device */
+	/* for each device's resource */
+	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+};
+
+struct loongson_params {
+	u64 memory_offset;	/* efi_memory_map_loongson struct offset */
+	u64 cpu_offset;		/* efi_cpuinfo_loongson struct offset */
+	u64 system_offset;	/* system_loongson struct offset */
+	u64 irq_offset;		/* irq_source_routing_table struct offset */
+	u64 interface_offset;	/* interface_info struct offset */
+	u64 special_offset;	/* loongson_special_attribute struct offset */
+	u64 boarddev_table_offset;  /* board_devices offset */
+};
+
+struct smbios_tables {
+	u16 vers;     /* version of smbios */
+	u64 vga_bios; /* vga_bios address */
+	struct loongson_params lp;
+};
+
+struct efi_reset_system_t {
+	u64 ResetCold;
+	u64 ResetWarm;
+	u64 ResetType;
+	u64 Shutdown;
+	u64 DoSuspend; /* NULL if not support */
+};
+
+struct efi_loongson {
+	u64 mps;	/* MPS table */
+	u64 acpi;	/* ACPI table (IA64 ext 0.71) */
+	u64 acpi20;	/* ACPI table (ACPI 2.0) */
+	struct smbios_tables smbios;	/* SM BIOS table */
+	u64 sal_systab;	/* SAL system table */
+	u64 boot_info;	/* boot info table */
+};
+
+struct boot_params {
+	struct efi_loongson efi;
+	struct efi_reset_system_t reset_system;
+};
+
+struct loongson_system_configuration {
+	u32 nr_cpus;
+	u32 nr_nodes;
+	int cores_per_node;
+	int cores_per_package;
+	u16 boot_cpu_id;
+	u16 reserved_cpus_mask;
+	enum loongson_cpu_type cputype;
+	u64 ht_control_base;
+	u64 pci_mem_start_addr;
+	u64 pci_mem_end_addr;
+	u64 pci_io_base;
+	u64 restart_addr;
+	u64 poweroff_addr;
+	u64 suspend_addr;
+	u64 vgabios_addr;
+	u32 dma_mask_bits;
+	char ecname[32];
+	u32 nr_uarts;
+	struct uart_device uarts[MAX_UARTS];
+	u32 nr_sensors;
+	struct sensor_device sensors[MAX_SENSORS];
+	u64 workarounds;
+};
+
+extern struct efi_memory_map_loongson *loongson_memmap;
+extern struct loongson_system_configuration loongson_sysconf;
+
+#endif

arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ *	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ *	arch/mips/kernel/proc.c(show_cpuinfo),
+ *	loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	(PAGE_SIZE < 0x4000)
+#define cpu_has_divec		0
+#define cpu_has_ejtag		0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips16e2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mipsmt		0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_vce		0
+#define cpu_has_veic		0
+#define cpu_has_vint		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+
+#ifdef CONFIG_CPU_LOONGSON64
+#define cpu_has_wsbh		1
+#define cpu_has_ic_fills_f_dc	1
+#define cpu_hwrena_impl_bits	0xc0000000
+#endif
+
+#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * The header file of cs5536 south bridge.
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu <liujl@lemote.com>
+ */
+
+#ifndef _CS5536_H
+#define _CS5536_H
+
+#include <linux/types.h>
+
+extern void _rdmsr(u32 msr, u32 *hi, u32 *lo);
+extern void _wrmsr(u32 msr, u32 hi, u32 lo);
+
+/*
+ * MSR module base
+ */
+#define CS5536_SB_MSR_BASE	(0x00000000)
+#define CS5536_GLIU_MSR_BASE	(0x10000000)
+#define CS5536_ILLEGAL_MSR_BASE (0x20000000)
+#define CS5536_USB_MSR_BASE	(0x40000000)
+#define CS5536_IDE_MSR_BASE	(0x60000000)
+#define CS5536_DIVIL_MSR_BASE	(0x80000000)
+#define CS5536_ACC_MSR_BASE	(0xa0000000)
+#define CS5536_UNUSED_MSR_BASE	(0xc0000000)
+#define CS5536_GLCP_MSR_BASE	(0xe0000000)
+
+#define SB_MSR_REG(offset)	(CS5536_SB_MSR_BASE	| (offset))
+#define GLIU_MSR_REG(offset)	(CS5536_GLIU_MSR_BASE	| (offset))
+#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset))
+#define USB_MSR_REG(offset)	(CS5536_USB_MSR_BASE	| (offset))
+#define IDE_MSR_REG(offset)	(CS5536_IDE_MSR_BASE	| (offset))
+#define DIVIL_MSR_REG(offset)	(CS5536_DIVIL_MSR_BASE	| (offset))
+#define ACC_MSR_REG(offset)	(CS5536_ACC_MSR_BASE	| (offset))
+#define UNUSED_MSR_REG(offset)	(CS5536_UNUSED_MSR_BASE | (offset))
+#define GLCP_MSR_REG(offset)	(CS5536_GLCP_MSR_BASE	| (offset))
+
+/*
+ * BAR SPACE OF VIRTUAL PCI :
+ * range for pci probe use, length is the actual size.
+ */
+/* IO space for all DIVIL modules */
+#define CS5536_IRQ_RANGE	0xffffffe0 /* USERD FOR PCI PROBE */
+#define CS5536_IRQ_LENGTH	0x20	/* THE REGS ACTUAL LENGTH */
+#define CS5536_SMB_RANGE	0xfffffff8
+#define CS5536_SMB_LENGTH	0x08
+#define CS5536_GPIO_RANGE	0xffffff00
+#define CS5536_GPIO_LENGTH	0x100
+#define CS5536_MFGPT_RANGE	0xffffffc0
+#define CS5536_MFGPT_LENGTH	0x40
+#define CS5536_ACPI_RANGE	0xffffffe0
+#define CS5536_ACPI_LENGTH	0x20
+#define CS5536_PMS_RANGE	0xffffff80
+#define CS5536_PMS_LENGTH	0x80
+/* IO space for IDE */
+#define CS5536_IDE_RANGE	0xfffffff0
+#define CS5536_IDE_LENGTH	0x10
+/* IO space for ACC */
+#define CS5536_ACC_RANGE	0xffffff80
+#define CS5536_ACC_LENGTH	0x80
+/* MEM space for ALL USB modules */
+#define CS5536_OHCI_RANGE	0xfffff000
+#define CS5536_OHCI_LENGTH	0x1000
+#define CS5536_EHCI_RANGE	0xfffff000
+#define CS5536_EHCI_LENGTH	0x1000
+
+/*
+ * PCI MSR ACCESS
+ */
+#define PCI_MSR_CTRL		0xF0
+#define PCI_MSR_ADDR		0xF4
+#define PCI_MSR_DATA_LO		0xF8
+#define PCI_MSR_DATA_HI		0xFC
+
+/**************** MSR *****************************/
+
+/*
+ * GLIU STANDARD MSR
+ */
+#define GLIU_CAP		0x00
+#define GLIU_CONFIG		0x01
+#define GLIU_SMI		0x02
+#define GLIU_ERROR		0x03
+#define GLIU_PM			0x04
+#define GLIU_DIAG		0x05
+
+/*
+ * GLIU SPEC. MSR
+ */
+#define GLIU_P2D_BM0		0x20
+#define GLIU_P2D_BM1		0x21
+#define GLIU_P2D_BM2		0x22
+#define GLIU_P2D_BMK0		0x23
+#define GLIU_P2D_BMK1		0x24
+#define GLIU_P2D_BM3		0x25
+#define GLIU_P2D_BM4		0x26
+#define GLIU_COH		0x80
+#define GLIU_PAE		0x81
+#define GLIU_ARB		0x82
+#define GLIU_ASMI		0x83
+#define GLIU_AERR		0x84
+#define GLIU_DEBUG		0x85
+#define GLIU_PHY_CAP		0x86
+#define GLIU_NOUT_RESP		0x87
+#define GLIU_NOUT_WDATA		0x88
+#define GLIU_WHOAMI		0x8B
+#define GLIU_SLV_DIS		0x8C
+#define GLIU_IOD_BM0		0xE0
+#define GLIU_IOD_BM1		0xE1
+#define GLIU_IOD_BM2		0xE2
+#define GLIU_IOD_BM3		0xE3
+#define GLIU_IOD_BM4		0xE4
+#define GLIU_IOD_BM5		0xE5
+#define GLIU_IOD_BM6		0xE6
+#define GLIU_IOD_BM7		0xE7
+#define GLIU_IOD_BM8		0xE8
+#define GLIU_IOD_BM9		0xE9
+#define GLIU_IOD_SC0		0xEA
+#define GLIU_IOD_SC1		0xEB
+#define GLIU_IOD_SC2		0xEC
+#define GLIU_IOD_SC3		0xED
+#define GLIU_IOD_SC4		0xEE
+#define GLIU_IOD_SC5		0xEF
+#define GLIU_IOD_SC6		0xF0
+#define GLIU_IOD_SC7		0xF1
+
+/*
+ * SB STANDARD
+ */
+#define SB_CAP		0x00
+#define SB_CONFIG	0x01
+#define SB_SMI		0x02
+#define SB_ERROR	0x03
+#define SB_MAR_ERR_EN		0x00000001
+#define SB_TAR_ERR_EN		0x00000002
+#define SB_RSVD_BIT1		0x00000004
+#define SB_EXCEP_ERR_EN		0x00000008
+#define SB_SYSE_ERR_EN		0x00000010
+#define SB_PARE_ERR_EN		0x00000020
+#define SB_TAS_ERR_EN		0x00000040
+#define SB_MAR_ERR_FLAG		0x00010000
+#define SB_TAR_ERR_FLAG		0x00020000
+#define SB_RSVD_BIT2		0x00040000
+#define SB_EXCEP_ERR_FLAG	0x00080000
+#define SB_SYSE_ERR_FLAG	0x00100000
+#define SB_PARE_ERR_FLAG	0x00200000
+#define SB_TAS_ERR_FLAG		0x00400000
+#define SB_PM		0x04
+#define SB_DIAG		0x05
+
+/*
+ * SB SPEC.
+ */
+#define SB_CTRL		0x10
+#define SB_R0		0x20
+#define SB_R1		0x21
+#define SB_R2		0x22
+#define SB_R3		0x23
+#define SB_R4		0x24
+#define SB_R5		0x25
+#define SB_R6		0x26
+#define SB_R7		0x27
+#define SB_R8		0x28
+#define SB_R9		0x29
+#define SB_R10		0x2A
+#define SB_R11		0x2B
+#define SB_R12		0x2C
+#define SB_R13		0x2D
+#define SB_R14		0x2E
+#define SB_R15		0x2F
+
+/*
+ * GLCP STANDARD
+ */
+#define GLCP_CAP		0x00
+#define GLCP_CONFIG		0x01
+#define GLCP_SMI		0x02
+#define GLCP_ERROR		0x03
+#define GLCP_PM			0x04
+#define GLCP_DIAG		0x05
+
+/*
+ * GLCP SPEC.
+ */
+#define GLCP_CLK_DIS_DELAY	0x08
+#define GLCP_PM_CLK_DISABLE	0x09
+#define GLCP_GLB_PM		0x0B
+#define GLCP_DBG_OUT		0x0C
+#define GLCP_RSVD1		0x0D
+#define GLCP_SOFT_COM		0x0E
+#define SOFT_BAR_SMB_FLAG	0x00000001
+#define SOFT_BAR_GPIO_FLAG	0x00000002
+#define SOFT_BAR_MFGPT_FLAG	0x00000004
+#define SOFT_BAR_IRQ_FLAG	0x00000008
+#define SOFT_BAR_PMS_FLAG	0x00000010
+#define SOFT_BAR_ACPI_FLAG	0x00000020
+#define SOFT_BAR_IDE_FLAG	0x00000400
+#define SOFT_BAR_ACC_FLAG	0x00000800
+#define SOFT_BAR_OHCI_FLAG	0x00001000
+#define SOFT_BAR_EHCI_FLAG	0x00002000
+#define GLCP_RSVD2		0x0F
+#define GLCP_CLK_OFF		0x10
+#define GLCP_CLK_ACTIVE		0x11
+#define GLCP_CLK_DISABLE	0x12
+#define GLCP_CLK4ACK		0x13
+#define GLCP_SYS_RST		0x14
+#define GLCP_RSVD3		0x15
+#define GLCP_DBG_CLK_CTRL	0x16
+#define GLCP_CHIP_REV_ID	0x17
+
+/* PIC */
+#define PIC_YSEL_LOW		0x20
+#define PIC_YSEL_LOW_USB_SHIFT		8
+#define PIC_YSEL_LOW_ACC_SHIFT		16
+#define PIC_YSEL_LOW_FLASH_SHIFT	24
+#define PIC_YSEL_HIGH		0x21
+#define PIC_ZSEL_LOW		0x22
+#define PIC_ZSEL_HIGH		0x23
+#define PIC_IRQM_PRIM		0x24
+#define PIC_IRQM_LPC		0x25
+#define PIC_XIRR_STS_LOW	0x26
+#define PIC_XIRR_STS_HIGH	0x27
+#define PCI_SHDW		0x34
+
+/*
+ * DIVIL STANDARD
+ */
+#define DIVIL_CAP		0x00
+#define DIVIL_CONFIG		0x01
+#define DIVIL_SMI		0x02
+#define DIVIL_ERROR		0x03
+#define DIVIL_PM		0x04
+#define DIVIL_DIAG		0x05
+
+/*
+ * DIVIL SPEC.
+ */
+#define DIVIL_LBAR_IRQ		0x08
+#define DIVIL_LBAR_KEL		0x09
+#define DIVIL_LBAR_SMB		0x0B
+#define DIVIL_LBAR_GPIO		0x0C
+#define DIVIL_LBAR_MFGPT	0x0D
+#define DIVIL_LBAR_ACPI		0x0E
+#define DIVIL_LBAR_PMS		0x0F
+#define DIVIL_LEG_IO		0x14
+#define DIVIL_BALL_OPTS		0x15
+#define DIVIL_SOFT_IRQ		0x16
+#define DIVIL_SOFT_RESET	0x17
+
+/* MFGPT */
+#define MFGPT_IRQ	0x28
+
+/*
+ * IDE STANDARD
+ */
+#define IDE_CAP		0x00
+#define IDE_CONFIG	0x01
+#define IDE_SMI		0x02
+#define IDE_ERROR	0x03
+#define IDE_PM		0x04
+#define IDE_DIAG	0x05
+
+/*
+ * IDE SPEC.
+ */
+#define IDE_IO_BAR	0x08
+#define IDE_CFG		0x10
+#define IDE_DTC		0x12
+#define IDE_CAST	0x13
+#define IDE_ETC		0x14
+#define IDE_INTERNAL_PM 0x15
+
+/*
+ * ACC STANDARD
+ */
+#define ACC_CAP		0x00
+#define ACC_CONFIG	0x01
+#define ACC_SMI		0x02
+#define ACC_ERROR	0x03
+#define ACC_PM		0x04
+#define ACC_DIAG	0x05
+
+/*
+ * USB STANDARD
+ */
+#define USB_CAP		0x00
+#define USB_CONFIG	0x01
+#define USB_SMI		0x02
+#define USB_ERROR	0x03
+#define USB_PM		0x04
+#define USB_DIAG	0x05
+
+/*
+ * USB SPEC.
+ */
+#define USB_OHCI	0x08
+#define USB_EHCI	0x09
+
+/****************** NATIVE ***************************/
+/* GPIO : I/O SPACE; REG : 32BITS */
+#define GPIOL_OUT_VAL		0x00
+#define GPIOL_OUT_EN		0x04
+
+#endif				/* _CS5536_H */

arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_mfgpt.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * cs5536 mfgpt header file
+ */
+
+#ifndef _CS5536_MFGPT_H
+#define _CS5536_MFGPT_H
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+#ifdef CONFIG_CS5536_MFGPT
+extern void setup_mfgpt0_timer(void);
+extern void disable_mfgpt0_counter(void);
+extern void enable_mfgpt0_counter(void);
+#else
+static inline void __maybe_unused setup_mfgpt0_timer(void)
+{
+}
+static inline void __maybe_unused disable_mfgpt0_counter(void)
+{
+}
+static inline void __maybe_unused enable_mfgpt0_counter(void)
+{
+}
+#endif
+
+#define MFGPT_TICK_RATE 14318000
+#define COMPARE	 ((MFGPT_TICK_RATE + HZ/2) / HZ)
+
+#define MFGPT_BASE	mfgpt_base
+#define MFGPT0_CMP2	(MFGPT_BASE + 2)
+#define MFGPT0_CNT	(MFGPT_BASE + 4)
+#define MFGPT0_SETUP	(MFGPT_BASE + 6)
+
+#endif /*!_CS5536_MFGPT_H */

arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * the definition file of cs5536 Virtual Support Module(VSM).
+ * pci configuration space can be accessed through the VSM, so
+ * there is no need of the MSR read/write now, except the spec.
+ * MSR registers which are not implemented yet.
+ *
+ * Copyright (C) 2007 Lemote Inc.
+ * Author : jlliu, liujl@lemote.com
+ */
+
+#ifndef _CS5536_PCI_H
+#define _CS5536_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci_regs.h>
+
+extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
+extern u32 cs5536_pci_conf_read4(int function, int reg);
+
+#define CS5536_ACC_INTR		9
+#define CS5536_IDE_INTR		14
+#define CS5536_USB_INTR		11
+#define CS5536_MFGPT_INTR	5
+#define CS5536_UART1_INTR	4
+#define CS5536_UART2_INTR	3
+
+/************** PCI BUS DEVICE FUNCTION ***************/
+
+/*
+ * PCI bus device function
+ */
+#define PCI_BUS_CS5536		0
+#define PCI_IDSEL_CS5536	14
+
+/********** STANDARD PCI-2.2 EXPANSION ****************/
+
+/*
+ * PCI configuration space
+ * we have to virtualize the PCI configure space head, so we should
+ * define the necessary IDs and some others.
+ */
+
+/* CONFIG of PCI VENDOR ID*/
+#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \
+	(((mod_dev_id) << 16) | (sys_vendor_id))
+
+/* VENDOR ID */
+#define CS5536_VENDOR_ID	0x1022
+
+/* DEVICE ID */
+#define CS5536_ISA_DEVICE_ID		0x2090
+#define CS5536_IDE_DEVICE_ID		0x209a
+#define CS5536_ACC_DEVICE_ID		0x2093
+#define CS5536_OHCI_DEVICE_ID		0x2094
+#define CS5536_EHCI_DEVICE_ID		0x2095
+
+/* CLASS CODE : CLASS SUB-CLASS INTERFACE */
+#define CS5536_ISA_CLASS_CODE		0x060100
+#define CS5536_IDE_CLASS_CODE		0x010180
+#define CS5536_ACC_CLASS_CODE		0x040100
+#define CS5536_OHCI_CLASS_CODE		0x0C0310
+#define CS5536_EHCI_CLASS_CODE		0x0C0320
+
+/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
+
+#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer)	\
+	((PCI_NONE_BIST << 24) | ((header_type) << 16) \
+		| ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
+
+#define PCI_NONE_BIST			0x00	/* RO not implemented yet. */
+#define PCI_BRIDGE_HEADER_TYPE		0x80	/* RO */
+#define PCI_NORMAL_HEADER_TYPE		0x00
+#define PCI_NORMAL_LATENCY_TIMER	0x00
+#define PCI_NORMAL_CACHE_LINE_SIZE	0x08	/* RW */
+
+/* BAR */
+#define PCI_BAR0_REG			0x10
+#define PCI_BAR1_REG			0x14
+#define PCI_BAR2_REG			0x18
+#define PCI_BAR3_REG			0x1c
+#define PCI_BAR4_REG			0x20
+#define PCI_BAR5_REG			0x24
+#define PCI_BAR_RANGE_MASK		0xFFFFFFFF
+
+/* CARDBUS CIS POINTER */
+#define PCI_CARDBUS_CIS_POINTER		0x00000000
+
+/* SUBSYSTEM VENDOR ID	*/
+#define CS5536_SUB_VENDOR_ID		CS5536_VENDOR_ID
+
+/* SUBSYSTEM ID */
+#define CS5536_ISA_SUB_ID		CS5536_ISA_DEVICE_ID
+#define CS5536_IDE_SUB_ID		CS5536_IDE_DEVICE_ID
+#define CS5536_ACC_SUB_ID		CS5536_ACC_DEVICE_ID
+#define CS5536_OHCI_SUB_ID		CS5536_OHCI_DEVICE_ID
+#define CS5536_EHCI_SUB_ID		CS5536_EHCI_DEVICE_ID
+
+/* EXPANSION ROM BAR */
+#define PCI_EXPANSION_ROM_BAR		0x00000000
+
+/* CAPABILITIES POINTER */
+#define PCI_CAPLIST_POINTER		0x00000000
+#define PCI_CAPLIST_USB_POINTER		0x40
+/* INTERRUPT */
+
+#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \
+	((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
+		((pin) << 8) | (mod_intr))
+
+#define PCI_MAX_LATENCY			0x40
+#define PCI_MIN_GRANT			0x00
+#define PCI_DEFAULT_PIN			0x01
+
+/*********** EXPANSION PCI REG ************************/
+
+/*
+ * ISA EXPANSION
+ */
+#define PCI_UART1_INT_REG	0x50
+#define PCI_UART2_INT_REG	0x54
+#define PCI_ISA_FIXUP_REG	0x58
+
+/*
+ * IDE EXPANSION
+ */
+#define PCI_IDE_CFG_REG		0x40
+#define CS5536_IDE_FLASH_SIGNATURE	0xDEADBEEF
+#define PCI_IDE_DTC_REG		0x48
+#define PCI_IDE_CAST_REG	0x4C
+#define PCI_IDE_ETC_REG		0x50
+#define PCI_IDE_PM_REG		0x54
+#define PCI_IDE_INT_REG		0x60
+
+/*
+ * ACC EXPANSION
+ */
+#define PCI_ACC_INT_REG		0x50
+
+/*
+ * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
+ */
+#define PCI_OHCI_PM_REG		0x40
+#define PCI_OHCI_INT_REG	0x50
+
+/*
+ * EHCI EXPANSION
+ */
+#define PCI_EHCI_LEGSMIEN_REG	0x50
+#define PCI_EHCI_LEGSMISTS_REG	0x54
+#define PCI_EHCI_FLADJ_REG	0x60
+
+#endif				/* _CS5536_PCI_H_ */

arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_vsm.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * the read/write interfaces for Virtual Support Module(VSM)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#ifndef _CS5536_VSM_H
+#define _CS5536_VSM_H
+
+#include <linux/types.h>
+
+typedef void (*cs5536_pci_vsm_write)(int reg, u32 value);
+typedef u32 (*cs5536_pci_vsm_read)(int reg);
+
+#define DECLARE_CS5536_MODULE(name) \
+extern void pci_##name##_write_reg(int reg, u32 value); \
+extern u32 pci_##name##_read_reg(int reg);
+
+/* ide module */
+DECLARE_CS5536_MODULE(ide)
+/* acc module */
+DECLARE_CS5536_MODULE(acc)
+/* ohci module */
+DECLARE_CS5536_MODULE(ohci)
+/* isa module */
+DECLARE_CS5536_MODULE(isa)
+/* ehci module */
+DECLARE_CS5536_MODULE(ehci)
+
+#endif				/* _CS5536_VSM_H */

arch/mips/include/asm/mach-loongson2ef/irq.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_LOONGSON64_IRQ_H_
+#define __ASM_MACH_LOONGSON64_IRQ_H_
+
+#include <boot_param.h>
+
+#ifdef CONFIG_CPU_LOONGSON64
+
+/* cpu core interrupt numbers */
+#define MIPS_CPU_IRQ_BASE 56
+
+#define LOONGSON_UART_IRQ   (MIPS_CPU_IRQ_BASE + 2) /* UART */
+#define LOONGSON_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 3) /* CASCADE */
+#define LOONGSON_TIMER_IRQ  (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
+
+#define LOONGSON_HT1_CFG_BASE		loongson_sysconf.ht_control_base
+#define LOONGSON_HT1_INT_VECTOR_BASE	(LOONGSON_HT1_CFG_BASE + 0x80)
+#define LOONGSON_HT1_INT_EN_BASE	(LOONGSON_HT1_CFG_BASE + 0xa0)
+#define LOONGSON_HT1_INT_VECTOR(n)	\
+		LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * (n))
+#define LOONGSON_HT1_INTN_EN(n)		\
+		LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * (n))
+
+#define LOONGSON_INT_ROUTER_OFFSET	0x1400
+#define LOONGSON_INT_ROUTER_INTEN	\
+	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
+#define LOONGSON_INT_ROUTER_INTENSET	\
+	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
+#define LOONGSON_INT_ROUTER_INTENCLR	\
+	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
+#define LOONGSON_INT_ROUTER_ENTRY(n)	\
+	  LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
+#define LOONGSON_INT_ROUTER_LPC		LOONGSON_INT_ROUTER_ENTRY(0x0a)
+#define LOONGSON_INT_ROUTER_HT1(n)	LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
+
+#define LOONGSON_INT_COREx_INTy(x, y)	(1<<(x) | 1<<(y+4))	/* route to int y of core x */
+
+#endif
+
+extern void fixup_irqs(void);
+extern void loongson3_ipi_interrupt(struct pt_regs *regs);
+
+#include_next <irq.h>
+#endif /* __ASM_MACH_LOONGSON64_IRQ_H_ */

arch/mips/include/asm/mach-loongson2ef/kernel-entry-init.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2009 Jiajie Chen (chenjiajie@cse.buaa.edu.cn)
+ * Copyright (C) 2012 Huacai Chen (chenhc@lemote.com)
+ */
+#ifndef __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H
+#define __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H
+
+#include <asm/cpu.h>
+
+/*
+ * Override macros used in arch/mips/kernel/head.S.
+ */
+	.macro	kernel_entry_setup
+#ifdef CONFIG_CPU_LOONGSON64
+	.set	push
+	.set	mips64
+	/* Set LPA on LOONGSON3 config3 */
+	mfc0	t0, CP0_CONFIG3
+	or	t0, (0x1 << 7)
+	mtc0	t0, CP0_CONFIG3
+	/* Set ELPA on LOONGSON3 pagegrain */
+	mfc0	t0, CP0_PAGEGRAIN
+	or	t0, (0x1 << 29)
+	mtc0	t0, CP0_PAGEGRAIN
+	/* Enable STFill Buffer */
+	mfc0	t0, CP0_PRID
+	/* Loongson-3A R4+ */
+	andi	t1, t0, PRID_IMP_MASK
+	li	t2, PRID_IMP_LOONGSON_64G
+	beq     t1, t2, 1f
+	nop
+	/* Loongson-3A R2/R3 */
+	andi	t0, (PRID_IMP_MASK | PRID_REV_MASK)
+	slti	t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+	bnez	t0, 2f
+	nop
+1:
+	mfc0	t0, CP0_CONFIG6
+	or	t0, 0x100
+	mtc0	t0, CP0_CONFIG6
+2:
+	_ehb
+	.set	pop
+#endif
+	.endm
+
+/*
+ * Do SMP slave processor setup.
+ */
+	.macro	smp_slave_setup
+#ifdef CONFIG_CPU_LOONGSON64
+	.set	push
+	.set	mips64
+	/* Set LPA on LOONGSON3 config3 */
+	mfc0	t0, CP0_CONFIG3
+	or	t0, (0x1 << 7)
+	mtc0	t0, CP0_CONFIG3
+	/* Set ELPA on LOONGSON3 pagegrain */
+	mfc0	t0, CP0_PAGEGRAIN
+	or	t0, (0x1 << 29)
+	mtc0	t0, CP0_PAGEGRAIN
+	/* Enable STFill Buffer */
+	mfc0	t0, CP0_PRID
+	/* Loongson-3A R4+ */
+	andi	t1, t0, PRID_IMP_MASK
+	li	t2, PRID_IMP_LOONGSON_64G
+	beq     t1, t2, 1f
+	nop
+	/* Loongson-3A R2/R3 */
+	andi	t0, (PRID_IMP_MASK | PRID_REV_MASK)
+	slti	t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+	bnez	t0, 2f
+	nop
+1:
+	mfc0	t0, CP0_CONFIG6
+	or	t0, 0x100
+	mtc0	t0, CP0_CONFIG6
+2:
+	_ehb
+	.set	pop
+#endif
+	.endm
+
+#endif /* __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H */

arch/mips/include/asm/mach-loongson2ef/loongson_hwmon.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LOONGSON_HWMON_H_
+#define __LOONGSON_HWMON_H_
+
+#include <linux/types.h>
+
+#define MIN_TEMP	0
+#define MAX_TEMP	255
+#define NOT_VALID_TEMP	999
+
+typedef int (*get_temp_fun)(int);
+extern int loongson3_cpu_temp(int);
+
+/* 0:Max speed, 1:Manual, 2:Auto */
+enum fan_control_mode {
+	FAN_FULL_MODE = 0,
+	FAN_MANUAL_MODE = 1,
+	FAN_AUTO_MODE = 2,
+	FAN_MODE_END
+};
+
+struct temp_range {
+	u8 low;
+	u8 high;
+	u8 level;
+};
+
+#define CONSTANT_SPEED_POLICY	0  /* at constant speed */
+#define STEP_SPEED_POLICY	1  /* use up/down arrays to describe policy */
+#define KERNEL_HELPER_POLICY	2  /* kernel as a helper to fan control */
+
+#define MAX_STEP_NUM	16
+#define MAX_FAN_LEVEL	255
+
+/* loongson_fan_policy works when fan work at FAN_AUTO_MODE */
+struct loongson_fan_policy {
+	u8	type;
+
+	/* percent only used when type is CONSTANT_SPEED_POLICY */
+	u8	percent;
+
+	/* period between two check. (Unit: S) */
+	u8	adjust_period;
+
+	/* fan adjust usually depend on a temprature input */
+	get_temp_fun	depend_temp;
+
+	/* up_step/down_step used when type is STEP_SPEED_POLICY */
+	u8	up_step_num;
+	u8	down_step_num;
+	struct temp_range up_step[MAX_STEP_NUM];
+	struct temp_range down_step[MAX_STEP_NUM];
+	struct delayed_work work;
+};
+
+#endif /* __LOONGSON_HWMON_H_*/

arch/mips/include/asm/mach-loongson2ef/loongson_regs.h

+/*
+ * Read/Write Loongson Extension Registers
+ */
+
+#ifndef _LOONGSON_REGS_H_
+#define _LOONGSON_REGS_H_
+
+#include <linux/types.h>
+#include <linux/bits.h>
+
+#include <asm/mipsregs.h>
+#include <asm/cpu.h>
+
+static inline bool cpu_has_cfg(void)
+{
+	return ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G);
+}
+
+static inline u32 read_cpucfg(u32 reg)
+{
+	u32 __res;
+
+	__asm__ __volatile__(
+		"parse_r __res,%0\n\t"
+		"parse_r reg,%1\n\t"
+		".insn \n\t"
+		".word (0xc8080118 | (reg << 21) | (__res << 11))\n\t"
+		:"=r"(__res)
+		:"r"(reg)
+		:
+		);
+	return __res;
+}
+
+/* Bit Domains for CFG registers */
+#define LOONGSON_CFG0	0x0
+#define LOONGSON_CFG0_PRID GENMASK(31, 0)
+
+#define LOONGSON_CFG1 0x1
+#define LOONGSON_CFG1_FP	BIT(0)
+#define LOONGSON_CFG1_FPREV	GENMASK(3, 1)
+#define LOONGSON_CFG1_MMI	BIT(4)
+#define LOONGSON_CFG1_MSA1	BIT(5)
+#define LOONGSON_CFG1_MSA2	BIT(6)
+#define LOONGSON_CFG1_CGP	BIT(7)
+#define LOONGSON_CFG1_WRP	BIT(8)
+#define LOONGSON_CFG1_LSX1	BIT(9)
+#define LOONGSON_CFG1_LSX2	BIT(10)
+#define LOONGSON_CFG1_LASX	BIT(11)
+#define LOONGSON_CFG1_R6FXP	BIT(12)
+#define LOONGSON_CFG1_R6CRCP	BIT(13)
+#define LOONGSON_CFG1_R6FPP	BIT(14)
+#define LOONGSON_CFG1_CNT64	BIT(15)
+#define LOONGSON_CFG1_LSLDR0	BIT(16)
+#define LOONGSON_CFG1_LSPREF	BIT(17)
+#define LOONGSON_CFG1_LSPREFX	BIT(18)
+#define LOONGSON_CFG1_LSSYNCI	BIT(19)
+#define LOONGSON_CFG1_LSUCA	BIT(20)
+#define LOONGSON_CFG1_LLSYNC	BIT(21)
+#define LOONGSON_CFG1_TGTSYNC	BIT(22)
+#define LOONGSON_CFG1_LLEXC	BIT(23)
+#define LOONGSON_CFG1_SCRAND	BIT(24)
+#define LOONGSON_CFG1_MUALP	BIT(25)
+#define LOONGSON_CFG1_KMUALEN	BIT(26)
+#define LOONGSON_CFG1_ITLBT	BIT(27)
+#define LOONGSON_CFG1_LSUPERF	BIT(28)
+#define LOONGSON_CFG1_SFBP	BIT(29)
+#define LOONGSON_CFG1_CDMAP	BIT(30)
+
+#define LOONGSON_CFG2 0x2
+#define LOONGSON_CFG2_LEXT1	BIT(0)
+#define LOONGSON_CFG2_LEXT2	BIT(1)
+#define LOONGSON_CFG2_LEXT3	BIT(2)
+#define LOONGSON_CFG2_LSPW	BIT(3)
+#define LOONGSON_CFG2_LBT1	BIT(4)
+#define LOONGSON_CFG2_LBT2	BIT(5)
+#define LOONGSON_CFG2_LBT3	BIT(6)
+#define LOONGSON_CFG2_LBTMMU	BIT(7)
+#define LOONGSON_CFG2_LPMP	BIT(8)
+#define LOONGSON_CFG2_LPMPREV	GENMASK(11, 9)
+#define LOONGSON_CFG2_LAMO	BIT(12)
+#define LOONGSON_CFG2_LPIXU	BIT(13)
+#define LOONGSON_CFG2_LPIXUN	BIT(14)
+#define LOONGSON_CFG2_LZVP	BIT(15)
+#define LOONGSON_CFG2_LZVREV	GENMASK(18, 16)
+#define LOONGSON_CFG2_LGFTP	BIT(19)
+#define LOONGSON_CFG2_LGFTPREV	GENMASK(22, 20)
+#define LOONGSON_CFG2_LLFTP	BIT(23)
+#define LOONGSON_CFG2_LLFTPREV	GENMASK(26, 24)
+#define LOONGSON_CFG2_LCSRP	BIT(27)
+#define LOONGSON_CFG2_LDISBLIKELY	BIT(28)
+
+#define LOONGSON_CFG3 0x3
+#define LOONGSON_CFG3_LCAMP	BIT(0)
+#define LOONGSON_CFG3_LCAMREV	GENMASK(3, 1)
+#define LOONGSON_CFG3_LCAMNUM	GENMASK(11, 4)
+#define LOONGSON_CFG3_LCAMKW	GENMASK(19, 12)
+#define LOONGSON_CFG3_LCAMVW	GENMASK(27, 20)
+
+#define LOONGSON_CFG4 0x4
+#define LOONGSON_CFG4_CCFREQ	GENMASK(31, 0)
+
+#define LOONGSON_CFG5 0x5
+#define LOONGSON_CFG5_CFM	GENMASK(15, 0)
+#define LOONGSON_CFG5_CFD	GENMASK(31, 16)
+
+#define LOONGSON_CFG6 0x6
+
+#define LOONGSON_CFG7 0x7
+#define LOONGSON_CFG7_GCCAEQRP	BIT(0)
+#define LOONGSON_CFG7_UCAWINP	BIT(1)
+
+static inline bool cpu_has_csr(void)
+{
+	if (cpu_has_cfg())
+		return (read_cpucfg(LOONGSON_CFG2) & LOONGSON_CFG2_LCSRP);
+
+	return false;
+}
+
+static inline u32 csr_readl(u32 reg)
+{
+	u32 __res;
+
+	/* RDCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r __res,%0\n\t"
+		"parse_r reg,%1\n\t"
+		".insn \n\t"
+		".word (0xc8000118 | (reg << 21) | (__res << 11))\n\t"
+		:"=r"(__res)
+		:"r"(reg)
+		:
+		);
+	return __res;
+}
+
+static inline u64 csr_readq(u32 reg)
+{
+	u64 __res;
+
+	/* DWRCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r __res,%0\n\t"
+		"parse_r reg,%1\n\t"
+		".insn \n\t"
+		".word (0xc8020118 | (reg << 21) | (__res << 11))\n\t"
+		:"=r"(__res)
+		:"r"(reg)
+		:
+		);
+	return __res;
+}
+
+static inline void csr_writel(u32 val, u32 reg)
+{
+	/* WRCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r reg,%0\n\t"
+		"parse_r val,%1\n\t"
+		".insn \n\t"
+		".word (0xc8010118 | (reg << 21) | (val << 11))\n\t"
+		:
+		:"r"(reg),"r"(val)
+		:
+		);
+}
+
+static inline void csr_writeq(u64 val, u32 reg)
+{
+	/* DWRCSR reg, val */
+	__asm__ __volatile__(
+		"parse_r reg,%0\n\t"
+		"parse_r val,%1\n\t"
+		".insn \n\t"
+		".word (0xc8030118 | (reg << 21) | (val << 11))\n\t"
+		:
+		:"r"(reg),"r"(val)
+		:
+		);
+}
+
+/* Public CSR Register can also be accessed with regular addresses */
+#define CSR_PUBLIC_MMIO_BASE 0x1fe00000
+
+#define MMIO_CSR(x)		(void *)TO_UNCAC(CSR_PUBLIC_MMIO_BASE + x)
+
+#define LOONGSON_CSR_FEATURES	0x8
+#define LOONGSON_CSRF_TEMP	BIT(0)
+#define LOONGSON_CSRF_NODECNT	BIT(1)
+#define LOONGSON_CSRF_MSI	BIT(2)
+#define LOONGSON_CSRF_EXTIOI	BIT(3)
+#define LOONGSON_CSRF_IPI	BIT(4)
+#define LOONGSON_CSRF_FREQ	BIT(5)
+
+#define LOONGSON_CSR_VENDOR	0x10 /* Vendor name string, should be "Loongson" */
+#define LOONGSON_CSR_CPUNAME	0x20 /* Processor name string */
+#define LOONGSON_CSR_NODECNT	0x408
+#define LOONGSON_CSR_CPUTEMP	0x428
+
+/* PerCore CSR, only accessable by local cores */
+#define LOONGSON_CSR_IPI_STATUS	0x1000
+#define LOONGSON_CSR_IPI_EN	0x1004
+#define LOONGSON_CSR_IPI_SET	0x1008
+#define LOONGSON_CSR_IPI_CLEAR	0x100c
+#define LOONGSON_CSR_IPI_SEND	0x1040
+#define CSR_IPI_SEND_IP_SHIFT	0
+#define CSR_IPI_SEND_CPU_SHIFT	16
+#define CSR_IPI_SEND_BLOCK	BIT(31)
+
+static inline u64 drdtime(void)
+{
+	int rID = 0;
+	u64 val = 0;
+
+	__asm__ __volatile__(
+		"parse_r rID,%0\n\t"
+		"parse_r val,%1\n\t"
+		".insn \n\t"
+		".word (0xc8090118 | (rID << 21) | (val << 11))\n\t"
+		:"=r"(rID),"=r"(val)
+		:
+		);
+	return val;
+}
+
+#endif

arch/mips/include/asm/mach-loongson2ef/machine.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_MACHINE_H
+#define __ASM_MACH_LOONGSON64_MACHINE_H
+
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
+
+#endif
+
+/* use fuloong2f as the default machine of LEMOTE_MACH2F */
+#ifdef CONFIG_LEMOTE_MACH2F
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F
+
+#endif
+
+#ifdef CONFIG_LOONGSON_MACH3X
+
+#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC
+
+#endif /* CONFIG_LOONGSON_MACH3X */
+
+#endif /* __ASM_MACH_LOONGSON64_MACHINE_H */

arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LOONGSON64_MC146818RTC_H
+#define __ASM_MACH_LOONGSON64_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LOONGSON64_MC146818RTC_H */

arch/mips/include/asm/mach-loongson2ef/mem.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_MEM_H
+#define __ASM_MACH_LOONGSON64_MEM_H
+
+/*
+ * high memory space
+ *
+ * in loongson2e, starts from 512M
+ * in loongson2f, starts from 2G 256M
+ */
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_HIGHMEM_START	0x20000000
+#else
+#define LOONGSON_HIGHMEM_START	0x90000000
+#endif
+
+/*
+ * the peripheral registers(MMIO):
+ *
+ * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000.
+ * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000.
+ */
+
+#define LOONGSON_MMIO_MEM_START 0x10000000
+
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_MMIO_MEM_END	0x20000000
+#else
+#define LOONGSON_MMIO_MEM_END	0x80000000
+#endif
+
+#endif /* __ASM_MACH_LOONGSON64_MEM_H */

arch/mips/include/asm/mach-loongson2ef/mmzone.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
+ *                    Institute of Computing Technology
+ * Author:  Xiang Gao, gaoxiang@ict.ac.cn
+ *          Huacai Chen, chenhc@lemote.com
+ *          Xiaofu Meng, Shuangshuang Zhang
+ */
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <boot_param.h>
+#define NODE_ADDRSPACE_SHIFT 44
+#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL
+#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL
+#define NODE2_ADDRSPACE_OFFSET 0x200000000000UL
+#define NODE3_ADDRSPACE_OFFSET 0x300000000000UL
+
+#define pa_to_nid(addr)  (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
+#define nid_to_addrbase(nid) ((nid) << NODE_ADDRSPACE_SHIFT)
+
+#define LEVELS_PER_SLICE 128
+
+struct slice_data {
+	unsigned long irq_enable_mask[2];
+	int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+	cpumask_t	h_cpus;
+	unsigned long slice_map;
+	unsigned long irq_alloc_mask[2];
+	struct slice_data slice[2];
+};
+
+struct node_data {
+	struct pglist_data pglist;
+	struct hub_data hub;
+	cpumask_t cpumask;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n)		(&__node_data[(n)]->pglist)
+#define hub_data(n)		(&__node_data[(n)]->hub)
+
+extern void setup_zero_pages(void);
+extern void __init prom_init_numa_memory(void);
+
+#endif /* _ASM_MACH_MMZONE_H */

arch/mips/include/asm/mach-loongson2ef/pci.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_PCI_H_
+#define __ASM_MACH_LOONGSON64_PCI_H_
+
+extern struct pci_ops loongson_pci_ops;
+
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/*
+ * we use address window2 to map cpu address space to pci space
+ * window2: cpu [1G, 2G] -> pci [1G, 2G]
+ * why not use window 0 & 1? because they are used by cpu when booting.
+ * window0: cpu [0, 256M] -> ddr [0, 256M]
+ * window1: cpu [256M, 512M] -> pci [256M, 512M]
+ */
+
+/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
+#define LOONGSON_CPU_MEM_SRC	0x40000000ul		/* 1G */
+#define LOONGSON_PCI_MEM_DST	LOONGSON_CPU_MEM_SRC
+
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCI_MEM_DST
+#define LOONGSON_PCI_MEM_END	(0x80000000ul-1)	/* 2G */
+
+#define MMAP_CPUTOPCI_SIZE	(LOONGSON_PCI_MEM_END - \
+					LOONGSON_PCI_MEM_START + 1)
+
+#else	/* loongson2f/32bit & loongson2e */
+
+/* this pci memory space is mapped by pcimap in pci.c */
+#ifdef CONFIG_CPU_LOONGSON64
+#define LOONGSON_PCI_MEM_START	0x40000000UL
+#define LOONGSON_PCI_MEM_END	0x7effffffUL
+#else
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCILO1_BASE
+#define LOONGSON_PCI_MEM_END	(LOONGSON_PCILO1_BASE + 0x04000000 * 2)
+#endif
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#endif	/* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
+#endif /* !__ASM_MACH_LOONGSON64_PCI_H_ */

arch/mips/include/asm/mach-loongson2ef/spaces.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_LOONGSON64_SPACES_H_
+#define __ASM_MACH_LOONGSON64_SPACES_H_
+
+#if defined(CONFIG_64BIT)
+#define CAC_BASE        _AC(0x9800000000000000, UL)
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+#endif

arch/mips/include/asm/mach-loongson2ef/topology.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#define cpu_to_node(cpu)	(cpu_logical_map(cpu) >> 2)
+#define cpumask_of_node(node)	(&__node_data[(node)]->cpumask)
+
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define cpumask_of_pcibus(bus)	(cpu_online_mask)
+
+extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+
+#define node_distance(from, to)	(__node_distances[(from)][(to)])
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_TOPOLOGY_H */

arch/mips/include/asm/mach-loongson2ef/workarounds.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MACH_LOONGSON64_WORKAROUNDS_H_
+#define __ASM_MACH_LOONGSON64_WORKAROUNDS_H_
+
+#define WORKAROUND_CPUFREQ	0x00000001
+#define WORKAROUND_CPUHOTPLUG	0x00000002
+
+#endif

arch/mips/loongson2ef/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+if MACH_LOONGSON2EF
+
+choice
+	prompt "Machine Type"
+
+config LEMOTE_FULOONG2E
+	bool "Lemote Fuloong(2e) mini-PC"
+	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_LOONGSON2E
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select FORCE_PCI
+	select I8259
+	select ISA
+	select IRQ_MIPS_CPU
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select CPU_HAS_WB
+	select LOONGSON_MC146818
+	help
+	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
+	  an FPGA northbridge
+
+	  Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+
+config LEMOTE_MACH2F
+	bool "Lemote Loongson 2F family machines"
+	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
+	select BOARD_SCACHE
+	select BOOT_ELF32
+	select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
+	select CPU_HAS_WB
+	select CS5536
+	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
+	select DMA_NONCOHERENT
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select HAVE_CLK
+	select FORCE_PCI
+	select I8259
+	select IRQ_MIPS_CPU
+	select ISA
+	select SYS_HAS_CPU_LOONGSON2F
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
+	help
+	  Lemote Loongson 2F family machines utilize the 2F revision of
+	  Loongson processor and the AMD CS5536 south bridge.
+
+	  These family machines include fuloong2f mini PC, yeeloong2f notebook,
+	  LingLoong allinone PC and so forth.
+
+endchoice
+
+config CS5536
+	bool
+
+config CS5536_MFGPT
+	bool "CS5536 MFGPT Timer"
+	depends on CS5536 && !HIGH_RES_TIMERS
+	select MIPS_EXTERNAL_TIMER
+	help
+	  This option enables the mfgpt0 timer of AMD CS5536. With this timer
+	  switched on you can not use high resolution timers.
+
+	  If you want to enable the Loongson2 CPUFreq Driver, Please enable
+	  this option at first, otherwise, You will get wrong system time.
+
+	  If unsure, say Yes.
+
+config LOONGSON_UART_BASE
+	bool
+	default y
+	depends on EARLY_PRINTK || SERIAL_8250
+
+config LOONGSON_MC146818
+	bool
+	default n
+
+config LEFI_FIRMWARE_INTERFACE
+	bool
+
+endif # MACH_LOONGSON2EF

arch/mips/loongson2ef/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Common code for all Loongson based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON2EF) += common/
+
+#
+# Lemote Fuloong mini-PC (Loongson 2E-based)
+#
+
+obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fuloong-2e/
+
+#
+# Lemote loongson2f family machines
+#
+
+obj-$(CONFIG_LEMOTE_MACH2F)  += lemote-2f/

arch/mips/loongson2ef/Platform

+#
+# Loongson Processors' Support
+#
+
+# Only gcc >= 4.4 have Loongson specific support
+cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+	$(call cc-option,-march=loongson2e,-march=r4600)
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+	$(call cc-option,-march=loongson2f,-march=r4600)
+# Enable the workarounds for Loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+  else
+    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+  endif
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+  else
+    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+  endif
+endif
+
+#
+# Loongson Machines' Support
+#
+
+platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/
+cflags-$(CONFIG_MACH_LOONGSON2EF) += -I$(srctree)/arch/mips/include/asm/mach-loongson2ef -mno-branch-likely
+load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000

arch/mips/loongson2ef/common/Makefile

+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for loongson based machines.
+#
+
+obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
+    bonito-irq.o mem.o machtype.o platform.o serial.o
+obj-$(CONFIG_PCI) += pci.o
+
+#
+# Serial port support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
+
+#
+# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
+# space
+#
+obj-$(CONFIG_CS5536) += cs5536/
+
+#
+# Suspend Support
+#
+
+obj-$(CONFIG_SUSPEND) += pm.o

arch/mips/loongson2ef/common/bonito-irq.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ */
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+
+#include <loongson.h>
+
+static inline void bonito_irq_enable(struct irq_data *d)
+{
+	LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE));
+	mmiowb();
+}
+
+static inline void bonito_irq_disable(struct irq_data *d)
+{
+	LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE));
+	mmiowb();
+}
+
+static struct irq_chip bonito_irq_type = {
+	.name		= "bonito_irq",
+	.irq_mask	= bonito_irq_disable,
+	.irq_unmask	= bonito_irq_enable,
+};
+
+static struct irqaction __maybe_unused dma_timeout_irqaction = {
+	.handler	= no_action,
+	.name		= "dma_timeout",
+};
+
+void bonito_irq_init(void)
+{
+	u32 i;
+
+	for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
+		irq_set_chip_and_handler(i, &bonito_irq_type,
+					 handle_level_irq);
+
+#ifdef CONFIG_CPU_LOONGSON2E
+	setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+#endif
+}

arch/mips/loongson2ef/common/cmdline.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init prom_init_cmdline(void)
+{
+	int prom_argc;
+	/* pmon passes arguments in 32bit pointers */
+	int *_prom_argv;
+	int i;
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	prom_argc = fw_arg0;
+	_prom_argv = (int *)fw_arg1;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < prom_argc; i++) {
+		l = (long)_prom_argv[i];
+		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, ((char *)l));
+		strcat(arcs_cmdline, " ");
+	}
+
+	prom_init_machtype();
+}

arch/mips/loongson2ef/common/early_printk.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*  early printk support
+ *
+ *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *  Copyright (c) 2009 Lemote Inc.
+ *  Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+#include <linux/serial_reg.h>
+#include <asm/setup.h>
+
+#include <loongson.h>
+
+#define PORT(base, offset) (u8 *)(base + offset)
+
+static inline unsigned int serial_in(unsigned char *base, int offset)
+{
+	return readb(PORT(base, offset));
+}
+
+static inline void serial_out(unsigned char *base, int offset, int value)
+{
+	writeb(value, PORT(base, offset));
+}
+
+void prom_putchar(char c)
+{
+	int timeout;
+	unsigned char *uart_base;
+
+	uart_base = (unsigned char *)_loongson_uart_base[0];
+	timeout = 1024;
+
+	while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) &&
+			(timeout-- > 0))
+		;
+
+	serial_out(uart_base, UART_TX, c);
+}

arch/mips/loongson2ef/common/env.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+#include <linux/export.h>
+#include <asm/bootinfo.h>
+#include <loongson.h>
+#include <boot_param.h>
+#include <workarounds.h>
+
+u32 cpu_clock_freq;
+EXPORT_SYMBOL(cpu_clock_freq);
+struct efi_memory_map_loongson *loongson_memmap;
+struct loongson_system_configuration loongson_sysconf;
+
+u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180};
+u64 loongson_chiptemp[MAX_PACKAGES];
+u64 loongson_freqctrl[MAX_PACKAGES];
+
+unsigned long long smp_group[4];
+
+#define parse_even_earlier(res, option, p)				\
+do {									\
+	unsigned int tmp __maybe_unused;				\
+									\
+	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
+		tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \
+} while (0)
+
+void __init prom_init_env(void)
+{
+	/* pmon passes arguments in 32bit pointers */
+	unsigned int processor_id;
+
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+	int *_prom_envp;
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	_prom_envp = (int *)fw_arg2;
+
+	l = (long)*_prom_envp;
+	while (l != 0) {
+		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
+		parse_even_earlier(memsize, "memsize", l);
+		parse_even_earlier(highmemsize, "highmemsize", l);
+		_prom_envp++;
+		l = (long)*_prom_envp;
+	}
+	if (memsize == 0)
+		memsize = 256;
+
+	loongson_sysconf.nr_uarts = 1;
+
+	pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
+#else
+	struct boot_params *boot_p;
+	struct loongson_params *loongson_p;
+	struct system_loongson *esys;
+	struct efi_cpuinfo_loongson *ecpu;
+	struct irq_source_routing_table *eirq_source;
+
+	/* firmware arguments are initialized in head.S */
+	boot_p = (struct boot_params *)fw_arg2;
+	loongson_p = &(boot_p->efi.smbios.lp);
+
+	esys = (struct system_loongson *)
+		((u64)loongson_p + loongson_p->system_offset);
+	ecpu = (struct efi_cpuinfo_loongson *)
+		((u64)loongson_p + loongson_p->cpu_offset);
+	eirq_source = (struct irq_source_routing_table *)
+		((u64)loongson_p + loongson_p->irq_offset);
+	loongson_memmap = (struct efi_memory_map_loongson *)
+		((u64)loongson_p + loongson_p->memory_offset);
+
+	cpu_clock_freq = ecpu->cpu_clock_freq;
+	loongson_sysconf.cputype = ecpu->cputype;
+	switch (ecpu->cputype) {
+	case Legacy_3A:
+	case Loongson_3A:
+		loongson_sysconf.cores_per_node = 4;
+		loongson_sysconf.cores_per_package = 4;
+		smp_group[0] = 0x900000003ff01000;
+		smp_group[1] = 0x900010003ff01000;
+		smp_group[2] = 0x900020003ff01000;
+		smp_group[3] = 0x900030003ff01000;
+		loongson_chipcfg[0] = 0x900000001fe00180;
+		loongson_chipcfg[1] = 0x900010001fe00180;
+		loongson_chipcfg[2] = 0x900020001fe00180;
+		loongson_chipcfg[3] = 0x900030001fe00180;
+		loongson_chiptemp[0] = 0x900000001fe0019c;
+		loongson_chiptemp[1] = 0x900010001fe0019c;
+		loongson_chiptemp[2] = 0x900020001fe0019c;
+		loongson_chiptemp[3] = 0x900030001fe0019c;
+		loongson_freqctrl[0] = 0x900000001fe001d0;
+		loongson_freqctrl[1] = 0x900010001fe001d0;
+		loongson_freqctrl[2] = 0x900020001fe001d0;
+		loongson_freqctrl[3] = 0x900030001fe001d0;
+		loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
+		loongson_sysconf.workarounds = WORKAROUND_CPUFREQ;
+		break;
+	case Legacy_3B:
+	case Loongson_3B:
+		loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */
+		loongson_sysconf.cores_per_package = 8;
+		smp_group[0] = 0x900000003ff01000;
+		smp_group[1] = 0x900010003ff05000;
+		smp_group[2] = 0x900020003ff09000;
+		smp_group[3] = 0x900030003ff0d000;
+		loongson_chipcfg[0] = 0x900000001fe00180;
+		loongson_chipcfg[1] = 0x900020001fe00180;
+		loongson_chipcfg[2] = 0x900040001fe00180;
+		loongson_chipcfg[3] = 0x900060001fe00180;
+		loongson_chiptemp[0] = 0x900000001fe0019c;
+		loongson_chiptemp[1] = 0x900020001fe0019c;
+		loongson_chiptemp[2] = 0x900040001fe0019c;
+		loongson_chiptemp[3] = 0x900060001fe0019c;
+		loongson_freqctrl[0] = 0x900000001fe001d0;
+		loongson_freqctrl[1] = 0x900020001fe001d0;
+		loongson_freqctrl[2] = 0x900040001fe001d0;
+		loongson_freqctrl[3] = 0x900060001fe001d0;
+		loongson_sysconf.ht_control_base = 0x90001EFDFB000000;
+		loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG;
+		break;
+	default:
+		loongson_sysconf.cores_per_node = 1;
+		loongson_sysconf.cores_per_package = 1;
+		loongson_chipcfg[0] = 0x900000001fe00180;
+	}
+
+	loongson_sysconf.nr_cpus = ecpu->nr_cpus;
+	loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id;
+	loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask;
+	if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
+		loongson_sysconf.nr_cpus = NR_CPUS;
+	loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus +
+		loongson_sysconf.cores_per_node - 1) /
+		loongson_sysconf.cores_per_node;
+
+	loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
+	loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
+	loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
+	loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
+	if (loongson_sysconf.dma_mask_bits < 32 ||
+		loongson_sysconf.dma_mask_bits > 64)
+		loongson_sysconf.dma_mask_bits = 32;
+
+	loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
+	loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
+	loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend;
+
+	loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios;
+	pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
+		loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
+		loongson_sysconf.vgabios_addr);
+
+	memset(loongson_sysconf.ecname, 0, 32);
+	if (esys->has_ec)
+		memcpy(loongson_sysconf.ecname, esys->ec_name, 32);
+	loongson_sysconf.workarounds |= esys->workarounds;
+
+	loongson_sysconf.nr_uarts = esys->nr_uarts;
+	if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS)
+		loongson_sysconf.nr_uarts = 1;
+	memcpy(loongson_sysconf.uarts, esys->uarts,
+		sizeof(struct uart_device) * loongson_sysconf.nr_uarts);
+
+	loongson_sysconf.nr_sensors = esys->nr_sensors;
+	if (loongson_sysconf.nr_sensors > MAX_SENSORS)
+		loongson_sysconf.nr_sensors = 0;
+	if (loongson_sysconf.nr_sensors)
+		memcpy(loongson_sysconf.sensors, esys->sensors,
+			sizeof(struct sensor_device) * loongson_sysconf.nr_sensors);
+#endif
+	if (cpu_clock_freq == 0) {
+		processor_id = (&current_cpu_data)->processor_id;
+		switch (processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON2E:
+			cpu_clock_freq = 533080000;
+			break;
+		case PRID_REV_LOONGSON2F:
+			cpu_clock_freq = 797000000;
+			break;
+		case PRID_REV_LOONGSON3A_R1:
+		case PRID_REV_LOONGSON3A_R2_0:
+		case PRID_REV_LOONGSON3A_R2_1:
+		case PRID_REV_LOONGSON3A_R3_0:
+		case PRID_REV_LOONGSON3A_R3_1:
+			cpu_clock_freq = 900000000;
+			break;
+		case PRID_REV_LOONGSON3B_R1:
+		case PRID_REV_LOONGSON3B_R2:
+			cpu_clock_freq = 1000000000;
+			break;
+		default:
+			cpu_clock_freq = 100000000;
+			break;
+		}
+	}
+	pr_info("CpuClock = %u\n", cpu_clock_freq);
+}

arch/mips/loongson2ef/common/init.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+
+#include <linux/memblock.h>
+#include <asm/bootinfo.h>
+#include <asm/traps.h>
+#include <asm/smp-ops.h>
+#include <asm/cacheflush.h>
+
+#include <loongson.h>
+
+/* Loongson CPU address windows config space base address */
+unsigned long __maybe_unused _loongson_addrwincfg_base;
+
+static void __init mips_nmi_setup(void)
+{
+	void *base;
+	extern char except_vec_nmi;
+
+	base = (void *)(CAC_BASE + 0x380);
+	memcpy(base, &except_vec_nmi, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+void __init prom_init(void)
+{
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+	_loongson_addrwincfg_base = (unsigned long)
+		ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
+#endif
+
+	prom_init_cmdline();
+	prom_init_env();
+
+	/* init base address of io space */
+	set_io_port_base((unsigned long)
+		ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+
+#ifdef CONFIG_NUMA
+	prom_init_numa_memory();
+#else
+	prom_init_memory();
+#endif
+
+	/*init the uart base address */
+	prom_init_uart_base();
+	register_smp_ops(&loongson3_smp_ops);
+	board_nmi_handler_setup = mips_nmi_setup;
+}
+
+void __init prom_free_prom_memory(void)
+{
+}

arch/mips/loongson2ef/common/irq.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+/*
+ * the first level int-handler will jump here if it is a bonito irq
+ */
+void bonito_irqdispatch(void)
+{
+	u32 int_status;
+	int i;
+
+	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
+	int_status = LOONGSON_INTISR;
+	while (int_status & (1 << 10)) {
+		udelay(1);
+		int_status = LOONGSON_INTISR;
+	}
+
+	/* Get pending sources, masked by current enables */
+	int_status = LOONGSON_INTISR & LOONGSON_INTEN;
+
+	if (int_status) {
+		i = __ffs(int_status);
+		do_IRQ(LOONGSON_IRQ_BASE + i);
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending;
+
+	pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	/* machine-specific plat_irq_dispatch */
+	mach_irq_dispatch(pending);
+}
+
+void __init arch_init_irq(void)
+{
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 * int-handler is not on bootstrap
+	 */
+	clear_c0_status(ST0_IM | ST0_BEV);
+
+	/* no steer */
+	LOONGSON_INTSTEER = 0;
+
+	/*
+	 * Mask out all interrupt by writing "1" to all bit position in
+	 * the interrupt reset reg.
+	 */
+	LOONGSON_INTENCLR = ~0;
+
+	/* machine specific irq init */
+	mach_init_irq();
+}

arch/mips/loongson2ef/common/machtype.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
+ */
+#include <linux/errno.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+/* please ensure the length of the machtype string is less than 50 */
+#define MACHTYPE_LEN 50
+
+static const char *system_types[] = {
+	[MACH_LOONGSON_UNKNOWN]	= "unknown loongson machine",
+	[MACH_LEMOTE_FL2E]	= "lemote-fuloong-2e-box",
+	[MACH_LEMOTE_FL2F]	= "lemote-fuloong-2f-box",
+	[MACH_LEMOTE_ML2F7]	= "lemote-mengloong-2f-7inches",
+	[MACH_LEMOTE_YL2F89]	= "lemote-yeeloong-2f-8.9inches",
+	[MACH_DEXXON_GDIUM2F10]	= "dexxon-gdium-2f",
+	[MACH_LEMOTE_NAS]	= "lemote-nas-2f",
+	[MACH_LEMOTE_LL2F]	= "lemote-lynloong-2f",
+	[MACH_LOONGSON_GENERIC]	= "generic-loongson-machine",
+	[MACH_LOONGSON_END]	= NULL,
+};
+
+const char *get_system_type(void)
+{
+	return system_types[mips_machtype];
+}
+
+void __weak __init mach_prom_init_machtype(void)
+{
+}
+
+void __init prom_init_machtype(void)
+{
+	char *p, str[MACHTYPE_LEN + 1];
+	int machtype = MACH_LEMOTE_FL2E;
+
+	mips_machtype = LOONGSON_MACHTYPE;
+
+	p = strstr(arcs_cmdline, "machtype=");
+	if (!p) {
+		mach_prom_init_machtype();
+		return;
+	}
+	p += strlen("machtype=");
+	strncpy(str, p, MACHTYPE_LEN);
+	str[MACHTYPE_LEN] = '\0';
+	p = strstr(str, " ");
+	if (p)
+		*p = '\0';
+
+	for (; system_types[machtype]; machtype++)
+		if (strstr(system_types[machtype], str)) {
+			mips_machtype = machtype;
+			break;
+		}
+}

arch/mips/loongson2ef/common/mem.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ */
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/memblock.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <boot_param.h>
+#include <mem.h>
+#include <pci.h>
+
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+
+u32 memsize, highmemsize;
+
+void __init prom_init_memory(void)
+{
+	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+
+	add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
+				20), BOOT_MEM_RESERVED);
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+	{
+		int bit;
+
+		bit = fls(memsize + highmemsize);
+		if (bit != ffs(memsize + highmemsize))
+			bit += 20;
+		else
+			bit = bit + 20 - 1;
+
+		/* set cpu window3 to map CPU to DDR: 2G -> 2G */
+		LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
+					  0x80000000ul, (1 << bit));
+		mmiowb();
+	}
+#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
+#ifdef CONFIG_64BIT
+	if (highmemsize > 0)
+		add_memory_region(LOONGSON_HIGHMEM_START,
+				  highmemsize << 20, BOOT_MEM_RAM);
+
+	add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
+			  LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
+
+#endif /* !CONFIG_64BIT */
+}
+
+#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
+void __init prom_init_memory(void)
+{
+	int i;
+	u32 node_id;
+	u32 mem_type;
+
+	/* parse memory information */
+	for (i = 0; i < loongson_memmap->nr_map; i++) {
+		node_id = loongson_memmap->map[i].node_id;
+		mem_type = loongson_memmap->map[i].mem_type;
+
+		if (node_id != 0)
+			continue;
+
+		switch (mem_type) {
+		case SYSTEM_RAM_LOW:
+			memblock_add(loongson_memmap->map[i].mem_start,
+				(u64)loongson_memmap->map[i].mem_size << 20);
+			break;
+		case SYSTEM_RAM_HIGH:
+			memblock_add(loongson_memmap->map[i].mem_start,
+				(u64)loongson_memmap->map[i].mem_size << 20);
+			break;
+		case SYSTEM_RAM_RESERVED:
+			memblock_reserve(loongson_memmap->map[i].mem_start,
+				(u64)loongson_memmap->map[i].mem_size << 20);
+			break;
+		}
+	}
+}
+
+#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
+/* override of arch/mips/mm/cache.c: __uncached_access */
+int __uncached_access(struct file *file, unsigned long addr)
+{
+	if (file->f_flags & O_DSYNC)
+		return 1;
+
+	return addr >= __pa(high_memory) ||
+		((addr >= LOONGSON_MMIO_MEM_START) &&
+		 (addr < LOONGSON_MMIO_MEM_END));
+}
+
+#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED
+
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <asm/current.h>
+
+static unsigned long uca_start, uca_end;
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	unsigned long offset = pfn << PAGE_SHIFT;
+	unsigned long end = offset + size;
+
+	if (__uncached_access(file, offset)) {
+		if (uca_start && (offset >= uca_start) &&
+		    (end <= uca_end))
+			return __pgprot((pgprot_val(vma_prot) &
+					 ~_CACHE_MASK) |
+					_CACHE_UNCACHED_ACCELERATED);
+		else
+			return pgprot_noncached(vma_prot);
+	}
+	return vma_prot;
+}
+
+static int __init find_vga_mem_init(void)
+{
+	struct pci_dev *dev = 0;
+	struct resource *r;
+	int idx;
+
+	if (uca_start)
+		return 0;
+
+	for_each_pci_dev(dev) {
+		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+			for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
+				r = &dev->resource[idx];
+				if (!r->start && r->end)
+					continue;
+				if (r->flags & IORESOURCE_IO)
+					continue;
+				if (r->flags & IORESOURCE_MEM) {
+					uca_start = r->start;
+					uca_end = r->end;
+					return 0;
+				}
+			}
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(find_vga_mem_init);
+#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */

arch/mips/loongson2ef/common/pci.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ */
+#include <linux/pci.h>
+
+#include <pci.h>
+#include <loongson.h>
+#include <boot_param.h>
+
+static struct resource loongson_pci_mem_resource = {
+	.name	= "pci memory space",
+	.start	= LOONGSON_PCI_MEM_START,
+	.end	= LOONGSON_PCI_MEM_END,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource loongson_pci_io_resource = {
+	.name	= "pci io space",
+	.start	= LOONGSON_PCI_IO_START,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct pci_controller  loongson_pci_controller = {
+	.pci_ops	= &loongson_pci_ops,
+	.io_resource	= &loongson_pci_io_resource,
+	.mem_resource	= &loongson_pci_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_offset	= 0x00000000UL,
+};
+
+static void __init setup_pcimap(void)
+{
+	/*
+	 * local to PCI mapping for CPU accessing PCI space
+	 * CPU address space [256M,448M] is window for accessing pci space
+	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+	 *
+	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+	 *	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
+	 */
+	LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 |
+		LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) |
+		LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) |
+		LOONGSON_PCIMAP_WIN(0, 0);
+
+	/*
+	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
+	 */
+	LOONGSON_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
+	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
+	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+	/* avoid deadlock of PCI reading/writing lock operation */
+	LOONGSON_PCI_ISR4C = 0xd2000001ul;
+
+	/* can not change gnt to break pci transfer when device's gnt not
+	deassert for some broken device */
+	LOONGSON_PXARB_CFG = 0x00fe0105ul;
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+	/*
+	 * set cpu addr window2 to map CPU address space to PCI address space
+	 */
+	LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
+		LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
+#endif
+}
+
+extern int sbx00_acpi_init(void);
+
+static int __init pcibios_init(void)
+{
+	setup_pcimap();
+
+	loongson_pci_controller.io_map_base = mips_io_port_base;
+#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE
+	loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr;
+	loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr;
+#endif
+	register_pci_controller(&loongson_pci_controller);
+
+#ifdef CONFIG_CPU_LOONGSON64
+	sbx00_acpi_init();
+#endif
+
+	return 0;
+}
+
+arch_initcall(pcibios_init);

arch/mips/loongson2ef/common/platform.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+
+#include <linux/err.h>
+#include <linux/smp.h>
+#include <linux/platform_device.h>
+
+static struct platform_device loongson2_cpufreq_device = {
+	.name = "loongson2_cpufreq",
+	.id = -1,
+};
+
+static int __init loongson2_cpufreq_init(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	/* Only 2F revision and it's successors support CPUFreq */
+	if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
+		return platform_device_register(&loongson2_cpufreq_device);
+
+	return -ENODEV;
+}
+
+arch_initcall(loongson2_cpufreq_init);

arch/mips/loongson2ef/common/pm.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * loongson-specific suspend support
+ *
+ *  Copyright (C) 2009 Lemote Inc.
+ *  Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+
+static unsigned int __maybe_unused cached_master_mask;	/* i8259A */
+static unsigned int __maybe_unused cached_slave_mask;
+static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */
+
+void arch_suspend_disable_irqs(void)
+{
+	/* disable all mips events */
+	local_irq_disable();
+
+#ifdef CONFIG_I8259
+	/* disable all events of i8259A */
+	cached_slave_mask = inb(PIC_SLAVE_IMR);
+	cached_master_mask = inb(PIC_MASTER_IMR);
+
+	outb(0xff, PIC_SLAVE_IMR);
+	inb(PIC_SLAVE_IMR);
+	outb(0xff, PIC_MASTER_IMR);
+	inb(PIC_MASTER_IMR);
+#endif
+	/* disable all events of bonito */
+	cached_bonito_irq_mask = LOONGSON_INTEN;
+	LOONGSON_INTENCLR = 0xffff;
+	(void)LOONGSON_INTENCLR;
+}
+
+void arch_suspend_enable_irqs(void)
+{
+	/* enable all mips events */
+	local_irq_enable();
+#ifdef CONFIG_I8259
+	/* only enable the cached events of i8259A */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);
+	outb(cached_master_mask, PIC_MASTER_IMR);
+#endif
+	/* enable all cached events of bonito */
+	LOONGSON_INTENSET = cached_bonito_irq_mask;
+	(void)LOONGSON_INTENSET;
+}
+
+/*
+ * Setup the board-specific events for waking up loongson from wait mode
+ */
+void __weak setup_wakeup_events(void)
+{
+}
+
+/*
+ * Check wakeup events
+ */
+int __weak wakeup_loongson(void)
+{
+	return 1;
+}
+
+/*
+ * If the events are really what we want to wakeup the CPU, wake it up
+ * otherwise put the CPU asleep again.
+ */
+static void wait_for_wakeup_events(void)
+{
+	while (!wakeup_loongson())
+		LOONGSON_CHIPCFG(0) &= ~0x7;
+}
+
+/*
+ * Stop all perf counters
+ *
+ * $24 is the control register of Loongson perf counter
+ */
+static inline void stop_perf_counters(void)
+{
+	__write_64bit_c0_register($24, 0, 0);
+}
+
+
+static void loongson_suspend_enter(void)
+{
+	static unsigned int cached_cpu_freq;
+
+	/* setup wakeup events via enabling the IRQs */
+	setup_wakeup_events();
+
+	stop_perf_counters();
+
+	cached_cpu_freq = LOONGSON_CHIPCFG(0);
+
+	/* Put CPU into wait mode */
+	LOONGSON_CHIPCFG(0) &= ~0x7;
+
+	/* wait for the given events to wakeup cpu from wait mode */
+	wait_for_wakeup_events();
+
+	LOONGSON_CHIPCFG(0) = cached_cpu_freq;
+	mmiowb();
+}
+
+void __weak mach_suspend(void)
+{
+}
+
+void __weak mach_resume(void)
+{
+}
+
+static int loongson_pm_enter(suspend_state_t state)
+{
+	mach_suspend();
+
+	/* processor specific suspend */
+	loongson_suspend_enter();
+
+	mach_resume();
+
+	return 0;
+}
+
+static int loongson_pm_valid_state(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_ON:
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops loongson_pm_ops = {
+	.valid	= loongson_pm_valid_state,
+	.enter	= loongson_pm_enter,
+};
+
+static int __init loongson_pm_init(void)
+{
+	suspend_set_ops(&loongson_pm_ops);
+
+	return 0;
+}
+arch_initcall(loongson_pm_init);

arch/mips/loongson2ef/common/reset.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Zhangjin Wu, wuzhangjin@gmail.com
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+
+#include <asm/idle.h>
+#include <asm/reboot.h>
+
+#include <loongson.h>
+#include <boot_param.h>
+
+static inline void loongson_reboot(void)
+{
+#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
+	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+#else
+	void (*func)(void);
+
+	func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
+
+	__asm__ __volatile__(
+	"	.set	noat						\n"
+	"	jr	%[func]						\n"
+	"	.set	at						\n"
+	: /* No outputs */
+	: [func] "r" (func));
+#endif
+}
+
+static void loongson_restart(char *command)
+{
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+	/* do preparation for reboot */
+	mach_prepare_reboot();
+
+	/* reboot via jumping to boot base address */
+	loongson_reboot();
+#else
+	void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
+
+	fw_restart();
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
+#endif
+}
+
+static void loongson_poweroff(void)
+{
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+	mach_prepare_shutdown();
+
+	/*
+	 * It needs a wait loop here, but mips/kernel/reset.c already calls
+	 * a generic delay loop, machine_hang(), so simply return.
+	 */
+	return;
+#else
+	void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
+
+	fw_poweroff();
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
+#endif
+}
+
+static void loongson_halt(void)
+{
+	pr_notice("\n\n** You can safely turn off the power now **\n\n");
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = loongson_restart;
+	_machine_halt = loongson_halt;
+	pm_power_off = loongson_poweroff;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);

arch/mips/loongson2ef/common/rtc.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Lemote Fuloong platform support
+ *
+ *  Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+static struct resource loongson_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device loongson_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= loongson_rtc_resources,
+	.num_resources	= ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+	platform_device_register(&loongson_rtc_device);
+	return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);

arch/mips/loongson2ef/common/serial.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Yan hua (yanhua@lemote.com)
+ * Author: Wu Zhangjin (wuzhangjin@gmail.com)
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define PORT(int, clk)			\
+{								\
+	.irq		= int,					\
+	.uartclk	= clk,					\
+	.iotype		= UPIO_PORT,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
+	.regshift	= 0,					\
+}
+
+#define PORT_M(int, clk)				\
+{								\
+	.irq		= MIPS_CPU_IRQ_BASE + (int),		\
+	.uartclk	= clk,					\
+	.iotype		= UPIO_MEM,				\
+	.membase	= (void __iomem *)NULL,			\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
+	.regshift	= 0,					\
+}
+
+static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = {
+	[MACH_LOONGSON_UNKNOWN]	= {},
+	[MACH_LEMOTE_FL2E]	= {PORT(4, 1843200), {} },
+	[MACH_LEMOTE_FL2F]	= {PORT(3, 1843200), {} },
+	[MACH_LEMOTE_ML2F7]	= {PORT_M(3, 3686400), {} },
+	[MACH_LEMOTE_YL2F89]	= {PORT_M(3, 3686400), {} },
+	[MACH_DEXXON_GDIUM2F10]	= {PORT_M(3, 3686400), {} },
+	[MACH_LEMOTE_NAS]	= {PORT_M(3, 3686400), {} },
+	[MACH_LEMOTE_LL2F]	= {PORT(3, 1843200), {} },
+	[MACH_LOONGSON_GENERIC]	= {PORT_M(2, 25000000), {} },
+	[MACH_LOONGSON_END]	= {},
+};
+
+static struct platform_device uart8250_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+};
+
+static int __init serial_init(void)
+{
+	int i;
+	unsigned char iotype;
+
+	iotype = uart8250_data[mips_machtype][0].iotype;
+
+	if (UPIO_MEM == iotype) {
+		uart8250_data[mips_machtype][0].mapbase =
+			loongson_uart_base[0];
+		uart8250_data[mips_machtype][0].membase =
+			(void __iomem *)_loongson_uart_base[0];
+	}
+	else if (UPIO_PORT == iotype)
+		uart8250_data[mips_machtype][0].iobase =
+			loongson_uart_base[0] - LOONGSON_PCIIO_BASE;
+
+	if (loongson_sysconf.uarts[0].uartclk)
+		uart8250_data[mips_machtype][0].uartclk =
+			loongson_sysconf.uarts[0].uartclk;
+
+	for (i = 1; i < loongson_sysconf.nr_uarts; i++) {
+		iotype = loongson_sysconf.uarts[i].iotype;
+		uart8250_data[mips_machtype][i].iotype = iotype;
+		loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base;
+
+		if (UPIO_MEM == iotype) {
+			uart8250_data[mips_machtype][i].irq =
+				MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset;
+			uart8250_data[mips_machtype][i].mapbase =
+				loongson_uart_base[i];
+			uart8250_data[mips_machtype][i].membase =
+				ioremap_nocache(loongson_uart_base[i], 8);
+		} else if (UPIO_PORT == iotype) {
+			uart8250_data[mips_machtype][i].irq =
+				loongson_sysconf.uarts[i].int_offset;
+			uart8250_data[mips_machtype][i].iobase =
+				loongson_uart_base[i] - LOONGSON_PCIIO_BASE;
+		}
+
+		uart8250_data[mips_machtype][i].uartclk =
+			loongson_sysconf.uarts[i].uartclk;
+		uart8250_data[mips_machtype][i].flags =
+			UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+	}
+
+	memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts],
+			0, sizeof(struct plat_serial8250_port));
+	uart8250_device.dev.platform_data = uart8250_data[mips_machtype];
+
+	return platform_device_register(&uart8250_device);
+}
+module_init(serial_init);
+
+static void __exit serial_exit(void)
+{
+	platform_device_unregister(&uart8250_device);
+}
+module_exit(serial_exit);

arch/mips/loongson2ef/common/setup.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ */
+#include <linux/export.h>
+#include <linux/init.h>
+
+#include <asm/wbflush.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#include <linux/screen_info.h>
+#endif
+
+static void wbflush_loongson(void)
+{
+	asm(".set\tpush\n\t"
+	    ".set\tnoreorder\n\t"
+	    ".set mips3\n\t"
+	    "sync\n\t"
+	    "nop\n\t"
+	    ".set\tpop\n\t"
+	    ".set mips0\n\t");
+}
+
+void (*__wbflush)(void) = wbflush_loongson;
+EXPORT_SYMBOL(__wbflush);
+
+void __init plat_mem_setup(void)
+{
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+
+	screen_info = (struct screen_info) {
+		.orig_x			= 0,
+		.orig_y			= 25,
+		.orig_video_cols	= 80,
+		.orig_video_lines	= 25,
+		.orig_video_isVGA	= VIDEO_TYPE_VGAC,
+		.orig_video_points	= 16,
+	};
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}

arch/mips/loongson2ef/common/time.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+#include <asm/hpet.h>
+
+#include <loongson.h>
+#include <cs5536/cs5536_mfgpt.h>
+
+void __init plat_time_init(void)
+{
+	/* setup mips r4k timer */
+	mips_hpt_frequency = cpu_clock_freq / 2;
+
+#ifdef CONFIG_RS780_HPET
+	setup_hpet_timer();
+#else
+	setup_mfgpt0_timer();
+#endif
+}
+
+void read_persistent_clock64(struct timespec64 *ts)
+{
+	ts->tv_sec = mc146818_get_cmos_time();
+	ts->tv_nsec = 0;
+}

arch/mips/loongson2ef/common/uart_base.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+
+#include <linux/export.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+/* raw */
+unsigned long loongson_uart_base[MAX_UARTS] = {};
+/* ioremapped */
+unsigned long _loongson_uart_base[MAX_UARTS] = {};
+
+EXPORT_SYMBOL(loongson_uart_base);
+EXPORT_SYMBOL(_loongson_uart_base);
+
+void prom_init_loongson_uart_base(void)
+{
+	switch (mips_machtype) {
+	case MACH_LOONGSON_GENERIC:
+		/* The CPU provided serial port (CPU) */
+		loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0;
+		break;
+	case MACH_LEMOTE_FL2E:
+		loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8;
+		break;
+	case MACH_LEMOTE_FL2F:
+	case MACH_LEMOTE_LL2F:
+		loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8;
+		break;
+	case MACH_LEMOTE_ML2F7:
+	case MACH_LEMOTE_YL2F89:
+	case MACH_DEXXON_GDIUM2F10:
+	case MACH_LEMOTE_NAS:
+	default:
+		/* The CPU provided serial port (LPC) */
+		loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8;
+		break;
+	}
+
+	_loongson_uart_base[0] =
+		(unsigned long)ioremap_nocache(loongson_uart_base[0], 8);
+}

arch/mips/loongson64/lemote-2f/clock.c → arch/mips/loongson2ef/lemote-2f/clock.c

@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 
 #include <asm/clock.h>
-#include <asm/mach-loongson64/loongson.h>
+#include <asm/mach-loongson2ef/loongson.h>
 
 static LIST_HEAD(clock_list);
 static DEFINE_SPINLOCK(clock_lock);

arch/mips/loongson64/Kconfig

@@ -4,65 +4,6 @@ if MACH_LOONGSON64
 choice
 	prompt "Machine Type"
 
-config LEMOTE_FULOONG2E
-	bool "Lemote Fuloong(2e) mini-PC"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_MIGHT_HAVE_PC_SERIO
-	select CEVT_R4K
-	select CSRC_R4K
-	select SYS_HAS_CPU_LOONGSON2E
-	select DMA_NONCOHERENT
-	select BOOT_ELF32
-	select BOARD_SCACHE
-	select HAVE_PCI
-	select I8259
-	select ISA
-	select IRQ_MIPS_CPU
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_HAS_EARLY_PRINTK
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select CPU_HAS_WB
-	select LOONGSON_MC146818
-	help
-	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
-	  an FPGA northbridge
-
-	  Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
-
-config LEMOTE_MACH2F
-	bool "Lemote Loongson 2F family machines"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_MIGHT_HAVE_PC_SERIO
-	select BOARD_SCACHE
-	select BOOT_ELF32
-	select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
-	select CPU_HAS_WB
-	select CS5536
-	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
-	select DMA_NONCOHERENT
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select HAVE_CLK
-	select HAVE_PCI
-	select I8259
-	select IRQ_MIPS_CPU
-	select ISA
-	select SYS_HAS_CPU_LOONGSON2F
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select LOONGSON_MC146818
-	help
-	  Lemote Loongson 2F family machines utilize the 2F revision of
-	  Loongson processor and the AMD CS5536 south bridge.
-
-	  These family machines include fuloong2f mini PC, yeeloong2f notebook,
-	  LingLoong allinone PC and so forth.
-
 config LOONGSON_MACH3X
 	bool "Generic Loongson 3 family machines"
 	select ARCH_SPARSEMEM_ENABLE
@@ -95,22 +36,6 @@ config LOONGSON_MACH3X
 		of Loongson processor and RS780/SBX00 chipset.
 endchoice
 
-config CS5536
-	bool
-
-config CS5536_MFGPT
-	bool "CS5536 MFGPT Timer"
-	depends on CS5536 && !HIGH_RES_TIMERS
-	select MIPS_EXTERNAL_TIMER
-	help
-	  This option enables the mfgpt0 timer of AMD CS5536. With this timer
-	  switched on you can not use high resolution timers.
-
-	  If you want to enable the Loongson2 CPUFreq Driver, Please enable
-	  this option at first, otherwise, You will get wrong system time.
-
-	  If unsure, say Yes.
-
 config RS780_HPET
 	bool "RS780/SBX00 HPET Timer"
 	depends on LOONGSON_MACH3X

arch/mips/loongson64/Makefile

@@ -5,18 +5,6 @@
 
 obj-$(CONFIG_MACH_LOONGSON64) += common/
 
-#
-# Lemote Fuloong mini-PC (Loongson 2E-based)
-#
-
-obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fuloong-2e/
-
-#
-# Lemote loongson2f family machines
-#
-
-obj-$(CONFIG_LEMOTE_MACH2F)  += lemote-2f/
-
 #
 # All Loongson-3 family machines
 #

arch/mips/loongson64/Platform

@@ -2,25 +2,6 @@
 # Loongson Processors' Support
 #
 
-# Only gcc >= 4.4 have Loongson specific support
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += \
-	$(call cc-option,-march=loongson2e,-march=r4600)
-cflags-$(CONFIG_CPU_LOONGSON2F) += \
-	$(call cc-option,-march=loongson2f,-march=r4600)
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
-  else
-    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
-  endif
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
-  else
-    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
-  endif
-endif
 
 cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
 
@@ -72,6 +53,4 @@ endif
 
 platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
 cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely
-load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
-load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
 load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000

arch/mips/loongson64/common/Makefile

@@ -14,12 +14,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
 obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
-#
-# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
-# space
-#
-obj-$(CONFIG_CS5536) += cs5536/
-
 #
 # Suspend Support
 #

drivers/cpufreq/loongson2_cpufreq.c

@@ -23,7 +23,7 @@
 #include <asm/clock.h>
 #include <asm/idle.h>
 
-#include <asm/mach-loongson64/loongson.h>
+#include <asm/mach-loongson2ef/loongson.h>
 
 static uint nowait;