Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (48 commits)
  [ARM] S3C24XX: ADC: Check pending queue before freeing adc client
  [ARM] S3C: Fix ADC driver sparse warning
  [ARM] Osiris: Fix double initialisation in machine block
  [ARM] Anubis: Fix sparse warnings for items that should be static
  [ARM] JIVE: Fix sparse warnings about items which should be static
  [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'
  [ARM] S3C24XX: Fix sparse error in gpiolib.c
  [ARM] 5455/1: Fix IRQ noise from VIC code
  [ARM] 5454/1: ep93xx_eth: fix sparse warnings
  [ARM] remove .gitignore from include/asm-arm
  Update MAINTAINERS
  mxc defconfig updates
  mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board
  mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board
  Fix ifdef in plat-mxc/irc.c
  MX1ADS: remove I2C ifdefs
  qong: remove AIPS[12] mappings from machine-specific iotable
  mx31ads: imoux pins should be passed in as unsigned int
  MXC: remove orphan imx_init_uart() definition
  mx31: pin definition for csi
  ...

MAINTAINERS

@@ -543,6 +543,14 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:	Orphan
 F:	drivers/mmc/host/mmci.*
@@ -592,6 +600,13 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/CLKDEV SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+F:	arch/arm/common/clkdev.c
+F:	arch/arm/include/asm/clkdev.h
+
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
 P:	Mike Rapoport
 M:	mike@compulab.co.il
@@ -610,6 +625,15 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 
+ARM/EBSA110 MACHINE SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/mach-ebsa110/
+F:	drivers/net/arm/am79c961a.*
+
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 P:	Daniel Ribeiro
 M:	drwyrm@gmail.com
@@ -627,6 +651,15 @@ M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/FOOTBRIDGE ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/include/asm/hardware/dec21285.h
+F:	arch/arm/mach-footbridge/
+
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 P:	Sascha Hauer
 M:	kernel@pengutronix.de
@@ -767,19 +800,27 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/RISCPC ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/common/time-acorn.c
+F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
+F:	arch/arm/include/asm/hardware/ioc.h
+F:	arch/arm/include/asm/hardware/iomd.h
+F:	arch/arm/include/asm/hardware/memc.h
+F:	arch/arm/mach-rpc/
+F:	drivers/net/arm/ether*
+F:	drivers/scsi/arm/
+
 ARM/SHARK MACHINE SUPPORT
 P:	Alexander Schulz
 M:	alex@shark-linux.de
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
-ARM/STRONGARM110 PORT
-P:	Russell King
-M:	rmk@arm.linux.org.uk
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
-W:	http://www.arm.linux.org.uk/
-S:	Maintained
-
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-linux@fluff.org
@@ -813,6 +854,14 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.mcuos.com
 S:	Maintained
 
+ARM/VFP SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/vfp/
+
 ARPD SUPPORT
 P:	Jonathan Layes
 L:	netdev@vger.kernel.org
@@ -1372,6 +1421,11 @@ S:	Maintained
 F:	Documentation/input/cs461x.txt
 F:	sound/pci/cs46xx/
 
+CLK API
+P:	Russell King
+M:	linux@arm.linux.org.uk
+F:	include/linux/clk.h
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1576,7 +1630,8 @@ F:	drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
 P:	Russell King
-M:	rmk@arm.linux.org.uk
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*

arch/arm/common/vic.c

@@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
 	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
 			unsigned int irq = irq_start + i;
 
 			set_irq_chip(irq, &vic_chip);
 			set_irq_chip_data(irq, base);
-
-		if (vic_sources & (1 << i)) {
 			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}

arch/arm/include/asm/tlb.h

@@ -36,6 +36,8 @@
 struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
+	unsigned long		range_start;
+	unsigned long		range_end;
 };
 
 DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 	put_cpu_var(mmu_gathers);
 }
 
-#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+	if (!tlb->fullmm) {
+		if (addr < tlb->range_start)
+			tlb->range_start = addr;
+		if (addr + PAGE_SIZE > tlb->range_end)
+			tlb->range_end = addr + PAGE_SIZE;
+	}
+}
 
 /*
  * In the case of tlb vma handling, we can optimise these away in the
@@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 static inline void
 tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
+	if (!tlb->fullmm) {
 		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
 }
 
 static inline void
 tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
-		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+	if (!tlb->fullmm && tlb->range_end > 0)
+		flush_tlb_range(vma, tlb->range_start, tlb->range_end);
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)

arch/arm/kernel/sys_oabi-compat.c

@@ -83,6 +83,7 @@
 #include <linux/net.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 struct oldabi_stat64 {
 	unsigned long long st_dev;

arch/arm/mach-ep93xx/core.c

@@ -100,7 +100,7 @@ static unsigned int last_jiffy_time;
 
 #define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
 
-static int ep93xx_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
 	__raw_writel(1, EP93XX_TIMER1_CLEAR);
 	while ((signed long)

arch/arm/mach-mx1/mx1ads.c

@@ -28,9 +28,7 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
 #include <mach/iomux.h>
 #include "devices.h"
 
@@ -114,7 +112,6 @@ static struct platform_device flash_device = {
  * I2C
  */
 
-#ifdef CONFIG_I2C_IMX
 static int i2c_pins[] = {
 	PA15_PF_I2C_SDA,
 	PA16_PF_I2C_SCL,
@@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
 		.platform_data = &pcf857x_data[1],
 	},
 };
-#endif
 
 /*
  * Board init
@@ -172,12 +168,10 @@ static void __init mx1ads_init(void)
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
 
 	/* I2C */
-#ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
 	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-#endif
 }
 
 static void __init mx1ads_timer_init(void)

arch/arm/mach-mx2/clock_imx21.c

@@ -919,19 +919,19 @@ static struct clk_lookup lookups[] __initdata = {
 	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
 	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
-	_REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
 	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
 	_REGISTER_CLOCK(NULL, "brom", brom_clk)
 	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK(NULL, "owire", owire_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)

arch/arm/mach-mx3/Kconfig

@@ -19,6 +19,8 @@ config MACH_MX31ADS
 config MACH_MX31ADS_WM1133_EV1
 	bool "Support Wolfson Microelectronics 1133-EV1 module"
 	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8352_CONFIG_MODE_0
 	help

arch/arm/mach-mx3/mx31ads.c

@@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
@@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
 
+	regulator_has_full_constraints();
+
 	return 0;
 }
 

arch/arm/mach-mx3/pcm037.c

@@ -226,10 +226,10 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
-	/* SMSC9215 IRQ pin */
+	/* LAN9217 IRQ pin */
 	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
 				"pcm037-eth"))
-		gpio_direction_input(MX31_PIN_GPIO3_1);
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,

arch/arm/mach-pxa/generic.h

@@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer;
 extern void __init pxa_init_irq(int irq_nr,
 				int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);