Commit 72f1da01 authored by Rahul Sharma's avatar Rahul Sharma Committed by Kukjin Kim

ARM: dts: add dts file for exynos5260-xyref5260 board

The patch adds the dts file for xyref5260 board which
is based on exynos5260 SoC.
Signed-off-by: default avatarRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 16d7ff26
...@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ ...@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-arndale.dtb \ exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \ exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \ exynos5250-snow.dtb \
exynos5260-xyref5260.dtb \
exynos5420-arndale-octa.dtb \ exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \ exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \ exynos5420-smdk5420.dtb \
......
/*
* SAMSUNG XYREF5260 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos5260.dtsi"
/ {
model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
memory {
reg = <0x20000000 0x80000000>;
};
chosen {
bootargs = "console=ttySAC2,115200";
};
fin_pll: xxti {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "fin_pll";
#clock-cells = <0>;
};
xrtcxti: xrtcxti {
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "xrtcxti";
#clock-cells = <0>;
};
};
&pinctrl_0 {
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&mmc_0 {
status = "okay";
num-slots = <1>;
broken-cd;
bypass-smu;
supports-highspeed;
supports-hs200-mode; /* 200 Mhz */
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
};
};
&mmc_2 {
status = "okay";
num-slots = <1>;
supports-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment