ARM: dts: imx6q-sabrelite: add usb devices

- add usbphy devices
- add usb host controller and otg devices
- add usb h1 vbus regulator
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -42,9 +42,30 @@ ssi1: ssi@02028000 {
 				};
 			};
 
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_gpio_hog>;
+
+				gpios {
+					pinctrl_gpio_hog: gpiohog {
+						fsl,pins = <
+							   144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+							   >;
+					};
+				};
+			};
 		};
 
 		aips-bus@02100000 { /* AIPS2 */
+			usb@02184000 { /* USB OTG */
+				vbus-supply = <&reg_usb_otg_vbus>;
+				status = "okay";
+			};
+
+			usb@02184200 { /* USB1 */
+				status = "okay";
+			};
+
 			ethernet@02188000 {
 				phy-mode = "rgmii";
 				phy-reset-gpios = <&gpio3 23 0>;
@@ -111,6 +132,15 @@ reg_3p3v: 3p3v {
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {

arch/arm/boot/dts/imx6q.dtsi

@@ -461,12 +461,14 @@ regulator-vddsoc@140 {
 				};
 			};
 
-			usbphy@020c9000 { /* USBPHY1 */
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
 			};
 
-			usbphy@020ca000 { /* USBPHY2 */
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
 			};
@@ -614,6 +616,36 @@ aipstz@0217c000 { /* AIPSTZ2 */
 				reg = <0x0217c000 0x4000>;
 			};
 
+			usb@02184000 { /* USB OTG */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 0x04>;
+				fsl,usbphy = <&usbphy1>;
+				status = "disabled";
+			};
+
+			usb@02184200 { /* USB1 */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 40 0x04>;
+				fsl,usbphy = <&usbphy2>;
+				status = "disabled";
+			};
+
+			usb@02184400 { /* USB2 */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 41 0x04>;
+				status = "disabled";
+			};
+
+			usb@02184600 { /* USB3 */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184600 0x200>;
+				interrupts = <0 42 0x04>;
+				status = "disabled";
+			};
+
 			ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;