clk: meson: meson8b: add the GPU clock tree

Add the GPU clock tree on Meson8, Meson8b and Meson8m2.

The GPU clock tree on Meson8b and Meson8m2 is almost identical to the
one one GXBB:
- there's a glitch-free mux at HHI_MALI_CLK_CNTL[31]
- there are two identical parents for this mux: mali_0 and mali_1, each
  with a gate, divider and mux
- the parents of mali_0_sel and mali_1_sel are identical to GXBB except
  there's no GP0_PLL on these 32-bit SoCs

Meson8 is different because it does not have the glitch-free mux.
Instead if only has the mali_0 clock tree. The parents of mali_0_sel are
identical to the ones on Meson8b and Meson8m2.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181208171247.22238-4-martin.blumenstingl@googlemail.com

drivers/clk/meson/meson8b.c

@@ -1573,6 +1573,135 @@ static struct clk_regmap meson8b_hdmi_sys = {
 	},
 };
 
+/*
+ * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
+ * muxed by a glitch-free switch on Meson8b and Meson8m2. Meson8 only
+ * has mali_0 and no glitch-free mux.
+ */
+static const char * const meson8b_mali_0_1_parent_names[] = {
+	"xtal", "mpll2", "mpll1", "fclk_div7", "fclk_div4", "fclk_div3",
+	"fclk_div5"
+};
+
+static u32 meson8b_mali_0_1_mux_table[] = { 0, 2, 3, 4, 5, 6, 7 };
+
+static struct clk_regmap meson8b_mali_0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MALI_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 9,
+		.table = meson8b_mali_0_1_mux_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = meson8b_mali_0_1_parent_names,
+		.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
+		/*
+		 * Don't propagate rate changes up because the only changeable
+		 * parents are mpll1 and mpll2 but we need those for audio and
+		 * RGMII (Ethernet). We don't want to change the audio or
+		 * Ethernet clocks when setting the GPU frequency.
+		 */
+		.flags = 0,
+	},
+};
+
+static struct clk_regmap meson8b_mali_0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_MALI_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "mali_0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_mali_0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MALI_CLK_CNTL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mali_0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_mali_1_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MALI_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 25,
+		.table = meson8b_mali_0_1_mux_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_1_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = meson8b_mali_0_1_parent_names,
+		.num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
+		/*
+		 * Don't propagate rate changes up because the only changeable
+		 * parents are mpll1 and mpll2 but we need those for audio and
+		 * RGMII (Ethernet). We don't want to change the audio or
+		 * Ethernet clocks when setting the GPU frequency.
+		 */
+		.flags = 0,
+	},
+};
+
+static struct clk_regmap meson8b_mali_1_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_MALI_CLK_CNTL,
+		.shift = 16,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_1_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "mali_1_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_mali_1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MALI_CLK_CNTL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mali_1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mali_1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_mali = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MALI_CLK_CNTL,
+		.mask = 1,
+		.shift = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mali",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = (const char *[]){ "mali_0", "mali_1" },
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 
 static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -1833,6 +1962,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
 		[CLKID_HDMI_SYS_SEL]	    = &meson8b_hdmi_sys_sel.hw,
 		[CLKID_HDMI_SYS_DIV]	    = &meson8b_hdmi_sys_div.hw,
 		[CLKID_HDMI_SYS]	    = &meson8b_hdmi_sys.hw,
+		[CLKID_MALI_0_SEL]	    = &meson8b_mali_0_sel.hw,
+		[CLKID_MALI_0_DIV]	    = &meson8b_mali_0_div.hw,
+		[CLKID_MALI]		    = &meson8b_mali_0.hw,
 		[CLK_NR_CLKS]		    = NULL,
 	},
 	.num = CLK_NR_CLKS,
@@ -2012,6 +2144,13 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
 		[CLKID_HDMI_SYS_SEL]	    = &meson8b_hdmi_sys_sel.hw,
 		[CLKID_HDMI_SYS_DIV]	    = &meson8b_hdmi_sys_div.hw,
 		[CLKID_HDMI_SYS]	    = &meson8b_hdmi_sys.hw,
+		[CLKID_MALI_0_SEL]	    = &meson8b_mali_0_sel.hw,
+		[CLKID_MALI_0_DIV]	    = &meson8b_mali_0_div.hw,
+		[CLKID_MALI_0]		    = &meson8b_mali_0.hw,
+		[CLKID_MALI_1_SEL]	    = &meson8b_mali_1_sel.hw,
+		[CLKID_MALI_1_DIV]	    = &meson8b_mali_1_div.hw,
+		[CLKID_MALI_1]		    = &meson8b_mali_1.hw,
+		[CLKID_MALI]		    = &meson8b_mali.hw,
 		[CLK_NR_CLKS]		    = NULL,
 	},
 	.num = CLK_NR_CLKS,
@@ -2167,6 +2306,13 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
 	&meson8b_hdmi_sys_sel,
 	&meson8b_hdmi_sys_div,
 	&meson8b_hdmi_sys,
+	&meson8b_mali_0_sel,
+	&meson8b_mali_0_div,
+	&meson8b_mali_0,
+	&meson8b_mali_1_sel,
+	&meson8b_mali_1_div,
+	&meson8b_mali_1,
+	&meson8b_mali,
 };
 
 static const struct meson8b_clk_reset_line {

drivers/clk/meson/meson8b.h

@@ -33,6 +33,7 @@
 #define HHI_VID_CLK_CNTL2		0x194 /* 0x65 offset in data sheet */
 #define HHI_VID_DIVIDER_CNTL		0x198 /* 0x66 offset in data sheet */
 #define HHI_SYS_CPU_CLK_CNTL0		0x19c /* 0x67 offset in data sheet */
+#define HHI_MALI_CLK_CNTL		0x1b0 /* 0x6c offset in data sheet */
 #define HHI_HDMI_CLK_CNTL		0x1cc /* 0x73 offset in data sheet */
 #define HHI_NAND_CLK_CNTL		0x25c /* 0x97 offset in data sheet */
 #define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
@@ -139,8 +140,14 @@
 #define CLKID_HDMI_SYS_SEL	172
 #define CLKID_HDMI_SYS_DIV	173
 #define CLKID_HDMI_SYS		174
+#define CLKID_MALI_0_SEL	175
+#define CLKID_MALI_0_DIV	176
+#define CLKID_MALI_0		177
+#define CLKID_MALI_1_SEL	178
+#define CLKID_MALI_1_DIV	179
+#define CLKID_MALI_1		180
 
-#define CLK_NR_CLKS		175
+#define CLK_NR_CLKS		181
 
 /*
  * include the CLKID and RESETID that have