Commit 7520fa99 authored by Suzuki K Poulose's avatar Suzuki K Poulose Committed by Will Deacon

perf: ARM DynamIQ Shared Unit PMU support

Add support for the Cluster PMU part of the ARM DynamIQ Shared Unit (DSU).
The DSU integrates one or more cores with an L3 memory system, control
logic, and external interfaces to form a multicore cluster. The PMU
allows counting the various events related to L3, SCU etc, along with
providing a cycle counter.

The PMU can be accessed via system registers, which are common
to the cores in the same cluster. The PMU registers follow the
semantics of the ARMv8 PMU, mostly, with the exception that
the counters record the cluster wide events.

This driver is mostly based on the ARMv8 and CCI PMU drivers.
The driver only supports ARM64 at the moment. It can be extended
to support ARM32 by providing register accessors like we do in
arch/arm64/include/arm_dsu_pmu.h.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
parent 9249dee6
ARM DynamIQ Shared Unit (DSU) PMU
==================================
ARM DynamIQ Shared Unit integrates one or more cores with an L3 memory system,
control logic and external interfaces to form a multicore cluster. The PMU
allows counting the various events related to the L3 cache, Snoop Control Unit
etc, using 32bit independent counters. It also provides a 64bit cycle counter.
The PMU can only be accessed via CPU system registers and are common to the
cores connected to the same DSU. Like most of the other uncore PMUs, DSU
PMU doesn't support process specific events and cannot be used in sampling mode.
The DSU provides a bitmap for a subset of implemented events via hardware
registers. There is no way for the driver to determine if the other events
are available or not. Hence the driver exposes only those events advertised
by the DSU, in "events" directory under :
/sys/bus/event_sources/devices/arm_dsu_<N>/
The user should refer to the TRM of the product to figure out the supported events
and use the raw event code for the unlisted events.
The driver also exposes the CPUs connected to the DSU instance in "associated_cpus".
e.g usage :
perf stat -a -e arm_dsu_0/cycles/
/*
* ARM DynamIQ Shared Unit (DSU) PMU Low level register access routines.
*
* Copyright (C) ARM Limited, 2017.
*
* Author: Suzuki K Poulose <suzuki.poulose@arm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2, as published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/build_bug.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/sysreg.h>
#define CLUSTERPMCR_EL1 sys_reg(3, 0, 15, 5, 0)
#define CLUSTERPMCNTENSET_EL1 sys_reg(3, 0, 15, 5, 1)
#define CLUSTERPMCNTENCLR_EL1 sys_reg(3, 0, 15, 5, 2)
#define CLUSTERPMOVSSET_EL1 sys_reg(3, 0, 15, 5, 3)
#define CLUSTERPMOVSCLR_EL1 sys_reg(3, 0, 15, 5, 4)
#define CLUSTERPMSELR_EL1 sys_reg(3, 0, 15, 5, 5)
#define CLUSTERPMINTENSET_EL1 sys_reg(3, 0, 15, 5, 6)
#define CLUSTERPMINTENCLR_EL1 sys_reg(3, 0, 15, 5, 7)
#define CLUSTERPMCCNTR_EL1 sys_reg(3, 0, 15, 6, 0)
#define CLUSTERPMXEVTYPER_EL1 sys_reg(3, 0, 15, 6, 1)
#define CLUSTERPMXEVCNTR_EL1 sys_reg(3, 0, 15, 6, 2)
#define CLUSTERPMMDCR_EL1 sys_reg(3, 0, 15, 6, 3)
#define CLUSTERPMCEID0_EL1 sys_reg(3, 0, 15, 6, 4)
#define CLUSTERPMCEID1_EL1 sys_reg(3, 0, 15, 6, 5)
static inline u32 __dsu_pmu_read_pmcr(void)
{
return read_sysreg_s(CLUSTERPMCR_EL1);
}
static inline void __dsu_pmu_write_pmcr(u32 val)
{
write_sysreg_s(val, CLUSTERPMCR_EL1);
isb();
}
static inline u32 __dsu_pmu_get_reset_overflow(void)
{
u32 val = read_sysreg_s(CLUSTERPMOVSCLR_EL1);
/* Clear the bit */
write_sysreg_s(val, CLUSTERPMOVSCLR_EL1);
isb();
return val;
}
static inline void __dsu_pmu_select_counter(int counter)
{
write_sysreg_s(counter, CLUSTERPMSELR_EL1);
isb();
}
static inline u64 __dsu_pmu_read_counter(int counter)
{
__dsu_pmu_select_counter(counter);
return read_sysreg_s(CLUSTERPMXEVCNTR_EL1);
}
static inline void __dsu_pmu_write_counter(int counter, u64 val)
{
__dsu_pmu_select_counter(counter);
write_sysreg_s(val, CLUSTERPMXEVCNTR_EL1);
isb();
}
static inline void __dsu_pmu_set_event(int counter, u32 event)
{
__dsu_pmu_select_counter(counter);
write_sysreg_s(event, CLUSTERPMXEVTYPER_EL1);
isb();
}
static inline u64 __dsu_pmu_read_pmccntr(void)
{
return read_sysreg_s(CLUSTERPMCCNTR_EL1);
}
static inline void __dsu_pmu_write_pmccntr(u64 val)
{
write_sysreg_s(val, CLUSTERPMCCNTR_EL1);
isb();
}
static inline void __dsu_pmu_disable_counter(int counter)
{
write_sysreg_s(BIT(counter), CLUSTERPMCNTENCLR_EL1);
isb();
}
static inline void __dsu_pmu_enable_counter(int counter)
{
write_sysreg_s(BIT(counter), CLUSTERPMCNTENSET_EL1);
isb();
}
static inline void __dsu_pmu_counter_interrupt_enable(int counter)
{
write_sysreg_s(BIT(counter), CLUSTERPMINTENSET_EL1);
isb();
}
static inline void __dsu_pmu_counter_interrupt_disable(int counter)
{
write_sysreg_s(BIT(counter), CLUSTERPMINTENCLR_EL1);
isb();
}
static inline u32 __dsu_pmu_read_pmceid(int n)
{
switch (n) {
case 0:
return read_sysreg_s(CLUSTERPMCEID0_EL1);
case 1:
return read_sysreg_s(CLUSTERPMCEID1_EL1);
default:
BUILD_BUG();
return 0;
}
}
...@@ -17,6 +17,15 @@ config ARM_PMU_ACPI ...@@ -17,6 +17,15 @@ config ARM_PMU_ACPI
depends on ARM_PMU && ACPI depends on ARM_PMU && ACPI
def_bool y def_bool y
config ARM_DSU_PMU
tristate "ARM DynamIQ Shared Unit (DSU) PMU"
depends on ARM64
help
Provides support for performance monitor unit in ARM DynamIQ Shared
Unit (DSU). The DSU integrates one or more cores with an L3 memory
system, control logic. The PMU allows counting various events related
to DSU.
config HISI_PMU config HISI_PMU
bool "HiSilicon SoC PMU" bool "HiSilicon SoC PMU"
depends on ARM64 && ACPI depends on ARM64 && ACPI
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_ARM_DSU_PMU) += arm_dsu_pmu.o
obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o obj-$(CONFIG_ARM_PMU) += arm_pmu.o arm_pmu_platform.o
obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
obj-$(CONFIG_HISI_PMU) += hisilicon/ obj-$(CONFIG_HISI_PMU) += hisilicon/
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment