ARM: davinci: da8xx: Remove duplicated defines

Some macro for DA8xx CFGCHIP are defined in usb-davinci.h,
but da8xx-cfgchip.h intend to replace them.
Remove duplicated defines between da8xx-cfgchip.h and usb-davinci.h
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/mach-davinci/board-da830-evm.c

@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/platform_data/at24.h>
+#include <linux/mfd/da8xx-cfgchip.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
@@ -116,7 +117,7 @@ static __init void da830_evm_usb_init(void)
 	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
 
 	/* USB2.0 PHY reference clock is 24 MHz */
-	cfgchip2 &= ~CFGCHIP2_REFFREQ;
+	cfgchip2 &= ~CFGCHIP2_REFFREQ_MASK;
 	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
 
 	/*
@@ -133,7 +134,7 @@ static __init void da830_evm_usb_init(void)
 	 * controller won't be able to drive VBUS thinking that it's a B-device.
 	 * Otherwise, we want to use the OTG mode and enable VBUS comparators.
 	 */
-	cfgchip2 &= ~CFGCHIP2_OTGMODE;
+	cfgchip2 &= ~CFGCHIP2_OTGMODE_MASK;
 #ifdef	CONFIG_USB_MUSB_HOST
 	cfgchip2 |=  CFGCHIP2_FORCE_HOST;
 #else

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/gpio.h>
+#include <linux/mfd/da8xx-cfgchip.h>
 #include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach-types.h>
@@ -254,7 +255,7 @@ static __init void omapl138_hawk_usb_init(void)
 	/* Setup the Ref. clock frequency for the HAWK at 24 MHz. */
 
 	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-	cfgchip2 &= ~CFGCHIP2_REFFREQ;
+	cfgchip2 &= ~CFGCHIP2_REFFREQ_MASK;
 	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
 	__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
 

include/linux/platform_data/usb-davinci.h

@@ -11,29 +11,6 @@
 #ifndef __ASM_ARCH_USB_H
 #define __ASM_ARCH_USB_H
 
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD	(1 << 17)
-#define CFGCHIP2_VBUSSENSE	(1 << 16)
-#define CFGCHIP2_RESET		(1 << 15)
-#define CFGCHIP2_OTGMODE	(3 << 13)
-#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
-#define CFGCHIP2_FORCE_HOST	(1 << 13)
-#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
-#define CFGCHIP2_PHYPWRDN	(1 << 10)
-#define CFGCHIP2_OTGPWRDN	(1 << 9)
-#define CFGCHIP2_DATPOL 	(1 << 8)
-#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
-#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
-#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
-#define CFGCHIP2_REFFREQ	(0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
-
 struct	da8xx_ohci_root_hub;
 
 typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,