crypto/chcr: IPV6 code needs to be in CONFIG_IPV6

Error messages seen while building kernel with CONFIG_IPV6
disabled.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/crypto/chelsio/chcr_ktls.c

@@ -221,6 +221,7 @@ static int chcr_ktls_act_open_req(struct sock *sk,
 	return cxgb4_l2t_send(tx_info->netdev, skb, tx_info->l2te);
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
 /*
  * chcr_ktls_act_open_req6: creates TCB entry for ipv6 connection.
  * @sk - tcp socket.
@@ -270,6 +271,7 @@ static int chcr_ktls_act_open_req6(struct sock *sk,
 
 	return cxgb4_l2t_send(tx_info->netdev, skb, tx_info->l2te);
 }
+#endif /* #if IS_ENABLED(CONFIG_IPV6) */
 
 /*
  * chcr_setup_connection:  create a TCB entry so that TP will form tcp packets.
@@ -290,21 +292,27 @@ static int chcr_setup_connection(struct sock *sk,
 	tx_info->atid = atid;
 	tx_info->ip_family = sk->sk_family;
 
-	if (sk->sk_family == AF_INET ||
-	    (sk->sk_family == AF_INET6 && !sk->sk_ipv6only &&
-	     ipv6_addr_type(&sk->sk_v6_daddr) == IPV6_ADDR_MAPPED)) {
+	if (sk->sk_family == AF_INET) {
+		tx_info->ip_family = AF_INET;
+		ret = chcr_ktls_act_open_req(sk, tx_info, atid);
+#if IS_ENABLED(CONFIG_IPV6)
+	} else {
+		if (!sk->sk_ipv6only &&
+		    ipv6_addr_type(&sk->sk_v6_daddr) == IPV6_ADDR_MAPPED) {
 			tx_info->ip_family = AF_INET;
 			ret = chcr_ktls_act_open_req(sk, tx_info, atid);
 		} else {
 			tx_info->ip_family = AF_INET6;
-		ret =
-		cxgb4_clip_get(tx_info->netdev,
-			       (const u32 *)&sk->sk_v6_rcv_saddr.in6_u.u6_addr8,
+			ret = cxgb4_clip_get(tx_info->netdev,
+					     (const u32 *)
+					     &sk->sk_v6_rcv_saddr.s6_addr,
 					     1);
 			if (ret)
 				goto out;
 			ret = chcr_ktls_act_open_req6(sk, tx_info, atid);
 		}
+#endif
+	}
 
 	/* if return type is NET_XMIT_CN, msg will be sent but delayed, mark ret
 	 * success, if any other return type clear atid and return that failure.
@@ -394,11 +402,13 @@ void chcr_ktls_dev_del(struct net_device *netdev,
 	if (tx_info->l2te)
 		cxgb4_l2t_release(tx_info->l2te);
 
+#if IS_ENABLED(CONFIG_IPV6)
 	/* clear clip entry */
 	if (tx_info->ip_family == AF_INET6)
 		cxgb4_clip_release(netdev,
 				   (const u32 *)&sk->sk_v6_daddr.in6_u.u6_addr8,
 				   1);
+#endif
 
 	/* clear tid */
 	if (tx_info->tid != -1) {
@@ -491,12 +501,16 @@ int chcr_ktls_dev_add(struct net_device *netdev, struct sock *sk,
 		goto out2;
 
 	/* get peer ip */
-	if (sk->sk_family == AF_INET ||
-	    (sk->sk_family == AF_INET6 && !sk->sk_ipv6only &&
-	     ipv6_addr_type(&sk->sk_v6_daddr) == IPV6_ADDR_MAPPED)) {
+	if (sk->sk_family == AF_INET) {
 		memcpy(daaddr, &sk->sk_daddr, 4);
+#if IS_ENABLED(CONFIG_IPV6)
 	} else {
+		if (!sk->sk_ipv6only &&
+		    ipv6_addr_type(&sk->sk_v6_daddr) == IPV6_ADDR_MAPPED)
+			memcpy(daaddr, &sk->sk_daddr, 4);
+		else
 			memcpy(daaddr, sk->sk_v6_daddr.in6_u.u6_addr8, 16);
+#endif
 	}
 
 	/* get the l2t index */
@@ -903,7 +917,9 @@ chcr_ktls_write_tcp_options(struct chcr_ktls_info *tx_info, struct sk_buff *skb,
 	struct fw_eth_tx_pkt_wr *wr;
 	struct cpl_tx_pkt_core *cpl;
 	u32 ctrl, iplen, maclen;
+#if IS_ENABLED(CONFIG_IPV6)
 	struct ipv6hdr *ip6;
+#endif
 	unsigned int ndesc;
 	struct tcphdr *tcp;
 	int len16, pktlen;
@@ -958,9 +974,11 @@ chcr_ktls_write_tcp_options(struct chcr_ktls_info *tx_info, struct sk_buff *skb,
 		/* we need to correct ip header len */
 		ip = (struct iphdr *)(buf + maclen);
 		ip->tot_len = htons(pktlen - maclen);
+#if IS_ENABLED(CONFIG_IPV6)
 	} else {
 		ip6 = (struct ipv6hdr *)(buf + maclen);
 		ip6->payload_len = htons(pktlen - maclen - iplen);
+#endif
 	}
 	/* now take care of the tcp header, if fin is not set then clear push
 	 * bit as well, and if fin is set, it will be sent at the last so we