Commit 76eb1b1d authored by Stefan Chulski's avatar Stefan Chulski Committed by David S. Miller

net: mvpp2: set maximum packet size for 10G ports

Set maximum packet size for XLG 10G ports. Missing maximum packet size
for XLG configuration will cause kernel panic if oversized packet is
received by port.
Signed-off-by: default avatarStefan Chulski <stefanc@marvell.com>
Signed-off-by: default avatarAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 77321959
......@@ -363,7 +363,9 @@
#define MVPP22_XLG_CTRL0_MAC_RESET_DIS BIT(1)
#define MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN BIT(7)
#define MVPP22_XLG_CTRL0_MIB_CNT_DIS BIT(14)
#define MVPP22_XLG_CTRL1_REG 0x104
#define MVPP22_XLG_CTRL1_FRAMESIZELIMIT BIT(0)
#define MVPP22_XLG_CTRL1_FRAMESIZELIMIT_MASK 0x1fff
#define MVPP22_XLG_CTRL3_REG 0x11c
#define MVPP22_XLG_CTRL3_MACMODESELECT_MASK (7 << 13)
#define MVPP22_XLG_CTRL3_MACMODESELECT_GMAC (0 << 13)
......@@ -4498,6 +4500,18 @@ static inline void mvpp2_gmac_max_rx_size_set(struct mvpp2_port *port)
writel(val, port->base + MVPP2_GMAC_CTRL_0_REG);
}
/* Change maximum receive size of the port */
static inline void mvpp2_xlg_max_rx_size_set(struct mvpp2_port *port)
{
u32 val;
val = readl(port->base + MVPP22_XLG_CTRL1_REG);
val &= ~MVPP22_XLG_CTRL1_FRAMESIZELIMIT_MASK;
val |= ((port->pkt_size - MVPP2_MH_SIZE) / 2) <<
MVPP22_XLG_CTRL1_FRAMESIZELIMIT;
writel(val, port->base + MVPP22_XLG_CTRL1_REG);
}
/* Set defaults to the MVPP2 port */
static void mvpp2_defaults_set(struct mvpp2_port *port)
{
......@@ -6076,7 +6090,13 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
struct net_device *ndev = port->dev;
int i;
if (port->gop_id == 0 &&
(port->phy_interface == PHY_INTERFACE_MODE_XAUI ||
port->phy_interface == PHY_INTERFACE_MODE_10GKR))
mvpp2_xlg_max_rx_size_set(port);
else
mvpp2_gmac_max_rx_size_set(port);
mvpp2_txp_max_tx_size_set(port);
for (i = 0; i < port->nqvecs; i++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment