[SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state.

Use dummy interrupt handlers till chip initialization is complete.
Install real interrupt handlers after chip initialization.

Also removed msix installation code in bfa_iocfc_init().
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/bfa/bfa_ioc_ct.c

@@ -331,12 +331,12 @@ bfa_ioc_ct_pll_init(struct bfa_ioc_s *ioc)
 	 */
 	bfa_ioc_sem_get(ioc->ioc_regs.ioc_init_sem_reg);
 
-	pll_sclk = __APP_PLL_312_ENABLE | __APP_PLL_312_LRESETN |
-		__APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(0U) |
+	pll_sclk = __APP_PLL_312_LRESETN | __APP_PLL_312_ENARST |
+		__APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(3U) |
 		__APP_PLL_312_JITLMT0_1(3U) |
 		__APP_PLL_312_CNTLMT0_1(1U);
-	pll_fclk = __APP_PLL_425_ENABLE | __APP_PLL_425_LRESETN |
-		__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(0U) |
+	pll_fclk = __APP_PLL_425_LRESETN | __APP_PLL_425_ENARST |
+		__APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
 		__APP_PLL_425_JITLMT0_1(3U) |
 		__APP_PLL_425_CNTLMT0_1(1U);
 
@@ -366,36 +366,27 @@ bfa_ioc_ct_pll_init(struct bfa_ioc_s *ioc)
 	bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
 	bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
 
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-				__APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-				__APP_PLL_312_BYPASS |
-				__APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-				__APP_PLL_425_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-				__APP_PLL_425_BYPASS |
-				__APP_PLL_425_LOGIC_SOFT_RESET);
-	bfa_os_udelay(2);
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-				__APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-				__APP_PLL_425_LOGIC_SOFT_RESET);
-
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
-				pll_sclk | __APP_PLL_312_LOGIC_SOFT_RESET);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
-				pll_fclk | __APP_PLL_425_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk |
+		__APP_PLL_312_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk |
+		__APP_PLL_425_LOGIC_SOFT_RESET);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk |
+		__APP_PLL_312_LOGIC_SOFT_RESET | __APP_PLL_312_ENABLE);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk |
+		__APP_PLL_425_LOGIC_SOFT_RESET | __APP_PLL_425_ENABLE);
 
 	/**
 	 * Wait for PLLs to lock.
 	 */
+	bfa_reg_read(rb + HOSTFN0_INT_MSK);
 	bfa_os_udelay(2000);
 	bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
 	bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
 
-	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk);
-	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk);
+	bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk |
+		__APP_PLL_312_ENABLE);
+	bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk |
+		__APP_PLL_425_ENABLE);
 
 	bfa_reg_write((rb + MBIST_CTL_REG), __EDRAM_BISTR_START);
 	bfa_os_udelay(1000);

drivers/scsi/bfa/bfa_iocfc.c

@@ -659,7 +659,6 @@ bfa_iocfc_init(struct bfa_s *bfa)
 {
 	bfa->iocfc.action = BFA_IOCFC_ACT_INIT;
 	bfa_ioc_enable(&bfa->ioc);
-	bfa_msix_install(bfa);
 }
 
 /**