arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node

The network driver on Marvell SoC (7k/8k) needs to access some registers
in the system controller to configure its ports at runtime. This patch
adds a phandle reference to the syscon system controller node in the
ppv2 node.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -65,6 +65,7 @@ cpm_ethernet: ethernet@0 {
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
 				clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				marvell,system-controller = <&cpm_syscon0>;
 				status = "disabled";
 				dma-coherent;
 

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -65,6 +65,7 @@ cps_ethernet: ethernet@0 {
 				reg = <0x0 0x100000>, <0x129000 0xb000>;
 				clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
 				clock-names = "pp_clk", "gop_clk", "mg_clk";
+				marvell,system-controller = <&cps_syscon0>;
 				status = "disabled";
 				dma-coherent;