IB/mlx5: Allow posting multi packet send WQEs if hardware supports

Set the field to allow posting multi packet send WQEs if hardware
supports this feature. This doesn't mean the send WQEs will be for
multi packet unless the send WQE was prepared according to multi
packet send WQE format.

User space shall use flag MLX5_IB_ALLOW_MPW to check if hardware
supports MPW and allows MPW in SQ context.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

drivers/infiniband/hw/mlx5/main.c

@@ -802,8 +802,9 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
 
 	if (field_avail(typeof(resp), mlx5_ib_support_multi_pkt_send_wqes,
 			uhw->outlen)) {
+		if (MLX5_CAP_ETH(mdev, multi_pkt_send_wqe))
 			resp.mlx5_ib_support_multi_pkt_send_wqes =
-			MLX5_CAP_ETH(mdev, multi_pkt_send_wqe);
+				MLX5_IB_ALLOW_MPW;
 		resp.response_length +=
 			sizeof(resp.mlx5_ib_support_multi_pkt_send_wqes);
 	}

drivers/infiniband/hw/mlx5/qp.c

@@ -1083,6 +1083,8 @@ static int create_raw_packet_qp_sq(struct mlx5_ib_dev *dev,
 
 	sqc = MLX5_ADDR_OF(create_sq_in, in, ctx);
 	MLX5_SET(sqc, sqc, flush_in_error_en, 1);
+	if (MLX5_CAP_ETH(dev->mdev, multi_pkt_send_wqe))
+		MLX5_SET(sqc, sqc, allow_multi_pkt_send_wqe, 1);
 	MLX5_SET(sqc, sqc, state, MLX5_SQC_STATE_RST);
 	MLX5_SET(sqc, sqc, user_index, MLX5_GET(qpc, qpc, user_index));
 	MLX5_SET(sqc, sqc, cqn, MLX5_GET(qpc, qpc, cqn_snd));

include/linux/mlx5/mlx5_ifc.h

@@ -2445,7 +2445,7 @@ struct mlx5_ifc_sqc_bits {
 	u8         cd_master[0x1];
 	u8         fre[0x1];
 	u8         flush_in_error_en[0x1];
-	u8         reserved_at_4[0x1];
+	u8         allow_multi_pkt_send_wqe[0x1];
 	u8	   min_wqe_inline_mode[0x3];
 	u8         state[0x4];
 	u8         reg_umr[0x1];

include/uapi/rdma/mlx5-abi.h

@@ -168,6 +168,11 @@ struct mlx5_packet_pacing_caps {
 	__u32 reserved;
 };
 
+enum mlx5_ib_mpw_caps {
+	MPW_RESERVED		= 1 << 0,
+	MLX5_IB_ALLOW_MPW	= 1 << 1,
+};
+
 enum mlx5_ib_sw_parsing_offloads {
 	MLX5_IB_SW_PARSING = 1 << 0,
 	MLX5_IB_SW_PARSING_CSUM = 1 << 1,