Commit 797430f1 authored by Kai Germaschewski's avatar Kai Germaschewski

Merge

parents 83ca4c7e 2ce8d421
......@@ -110,56 +110,8 @@ NETWORKS =net/network.o
LIBS =$(TOPDIR)/lib/lib.a
SUBDIRS =init kernel lib drivers mm fs net ipc sound
DRIVERS-n :=
DRIVERS-y :=
DRIVERS-m :=
DRIVERS- :=
DRIVERS-$(CONFIG_PCI) += drivers/pci/driver.o
DRIVERS-$(CONFIG_ACPI) += drivers/acpi/acpi.o
DRIVERS-$(CONFIG_PARPORT) += drivers/parport/driver.o
DRIVERS-y += drivers/base/base.o \
drivers/char/char.o \
drivers/block/block.o \
drivers/misc/misc.o \
drivers/net/net.o \
drivers/media/media.o
DRIVERS-$(CONFIG_NUBUS) += drivers/nubus/built-in.o
DRIVERS-$(CONFIG_ATM) += drivers/atm/atm.o
DRIVERS-$(CONFIG_IDE) += drivers/ide/idedriver.o
DRIVERS-$(CONFIG_FC4) += drivers/fc4/built-in.o
DRIVERS-$(CONFIG_SCSI) += drivers/scsi/scsidrv.o
DRIVERS-$(CONFIG_FUSION) += drivers/message/message.o
DRIVERS-$(CONFIG_IEEE1394) += drivers/ieee1394/ieee1394drv.o
ifneq ($(CONFIG_CD_NO_IDESCSI)$(CONFIG_BLK_DEV_IDECD)$(CONFIG_BLK_DEV_SR)$(CONFIG_PARIDE_PCD),)
DRIVERS-y += drivers/cdrom/driver.o
endif
DRIVERS-y = drivers/built-in.o
DRIVERS-$(CONFIG_SOUND) += sound/sound.o
DRIVERS-$(CONFIG_MTD) += drivers/mtd/mtdlink.o
DRIVERS-$(CONFIG_PCMCIA) += drivers/pcmcia/pcmcia.o
DRIVERS-$(CONFIG_DIO) += drivers/dio/built-in.o
DRIVERS-$(CONFIG_SBUS) += drivers/sbus/sbus_all.o
DRIVERS-$(CONFIG_ZORRO) += drivers/zorro/driver.o
DRIVERS-$(CONFIG_ALL_PPC) += drivers/macintosh/macintosh.o
DRIVERS-$(CONFIG_MAC) += drivers/macintosh/macintosh.o
DRIVERS-$(CONFIG_PNP) += drivers/pnp/pnp.o
DRIVERS-$(CONFIG_SGI_IP22) += drivers/sgi/built-in.o
DRIVERS-$(CONFIG_VT) += drivers/video/video.o
DRIVERS-$(CONFIG_PARIDE) += drivers/block/paride/built-in.o
DRIVERS-$(CONFIG_TC) += drivers/tc/built-in.o
DRIVERS-$(CONFIG_USB) += drivers/usb/usbdrv.o
DRIVERS-$(CONFIG_INPUT) += drivers/input/inputdrv.o
DRIVERS-$(CONFIG_GAMEPORT) += drivers/input/gameport/gamedrv.o
DRIVERS-$(CONFIG_SERIO) += drivers/input/serio/seriodrv.o
DRIVERS-$(CONFIG_I2O) += drivers/message/message.o
DRIVERS-$(CONFIG_I2C) += drivers/i2c/i2c.o
DRIVERS-$(CONFIG_PHONE) += drivers/telephony/telephony.o
DRIVERS-$(CONFIG_MD) += drivers/md/mddev.o
DRIVERS-$(CONFIG_BLUEZ) += drivers/bluetooth/bluetooth.o
DRIVERS-$(CONFIG_HOTPLUG_PCI) += drivers/hotplug/vmlinux-obj.o
DRIVERS-$(CONFIG_ISDN) += drivers/isdn/vmlinux-obj.o
DRIVERS := $(DRIVERS-y)
......
......@@ -2,30 +2,6 @@
# This file contains rules which are shared between multiple Makefiles.
#
#
# Special variables which should not be exported
#
unexport EXTRA_AFLAGS
unexport EXTRA_CFLAGS
unexport EXTRA_LDFLAGS
unexport EXTRA_ARFLAGS
unexport SUBDIRS
unexport SUB_DIRS
unexport ALL_SUB_DIRS
unexport MOD_SUB_DIRS
unexport O_TARGET
unexport obj-y
unexport obj-m
unexport obj-n
unexport obj-
unexport export-objs
unexport subdir-y
unexport subdir-m
unexport subdir-n
unexport subdir-
unexport mod-subdirs
# Some standard vars
comma := ,
......@@ -76,7 +52,7 @@ obj-m := $(filter-out %/, $(obj-m))
# add it to $(subdir-m)
both-m := $(filter $(mod-subdirs), $(subdir-y))
SUB_DIRS := $(subdir-y)
SUB_DIRS := $(subdir-y) $(if $(BUILD_MODULES),$(subdir-m))
MOD_SUB_DIRS := $(sort $(subdir-m) $(both-m))
ALL_SUB_DIRS := $(sort $(subdir-y) $(subdir-m) $(subdir-n) $(subdir-))
......@@ -107,14 +83,14 @@ multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)))
subdir-obj-y := $(foreach o,$(obj-y),$(if $(filter-out $(o),$(notdir $(o))),$(o)))
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m)))
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m))) $(EXTRA_TARGETS)
real-objs-m := $(foreach m, $(obj-m), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m)))
# ==========================================================================
#
# Get things started.
#
first_rule: all_targets
first_rule: vmlinux $(if $(BUILD_MODULES),$(obj-m))
#
# Common rules
......@@ -197,7 +173,7 @@ endif
# Build the compiled-in targets
# ---------------------------------------------------------------------------
all_targets: $(O_TARGET) $(L_TARGET) sub_dirs
vmlinux: $(O_TARGET) $(L_TARGET) $(EXTRA_TARGETS) sub_dirs
# To build objects in subdirs, we need to descend into the directories
$(sort $(subdir-obj-y)): sub_dirs ;
......@@ -282,8 +258,7 @@ $(patsubst %,_modinst_%,$(MOD_SUB_DIRS)) : FORCE
endif
.PHONY: modules
modules: $(obj-m) FORCE \
$(patsubst %,_modsubdir_%,$(MOD_SUB_DIRS))
modules: $(obj-m) FORCE $(patsubst %,_modsubdir_%,$(MOD_SUB_DIRS))
.PHONY: _modinst__
_modinst__: FORCE
......@@ -293,8 +268,7 @@ ifneq "$(strip $(obj-m))" ""
endif
.PHONY: modules_install
modules_install: _modinst__ \
$(patsubst %,_modinst_%,$(MOD_SUB_DIRS))
modules_install: _modinst__ $(patsubst %,_modinst_%,$(MOD_SUB_DIRS))
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
O_TARGET := kernel.o
EXTRA_TARGETS := head.o
EXTRA_AFLAGS := $(CFLAGS)
......@@ -97,7 +93,7 @@ endif
endif # GENERIC
all: kernel.o head.o
include $(TOPDIR)/Rules.make
ASM_OFFSETS_H = $(TOPDIR)/include/asm-alpha/asm_offsets.h
asm_offsets:
......@@ -112,4 +108,3 @@ asm_offsets:
clean::
rm -f check_asm
include $(TOPDIR)/Rules.make
......@@ -189,7 +189,7 @@ endif
ifeq ($(findstring y,$(CONFIG_ARCH_CLPS7500) $(CONFIG_ARCH_L7200)),y)
SUBDIRS +=drivers/acorn/char
DRIVERS +=drivers/acorn/char/acorn-char.o
DRIVERS +=drivers/acorn/char/built-in.o
endif
MAKEBOOT =$(MAKE) -C arch/$(ARCH)/boot
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
O_TARGET := kernel.o
ENTRY_OBJ = entry-$(PROCESSOR).o
AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR)
O_TARGET := kernel.o
# Object file lists.
obj-y := arch.o compat.o dma.o $(ENTRY_OBJ) entry-common.o irq.o \
......@@ -43,7 +40,7 @@ head-y := head.o
obj-$(CONFIG_DEBUG_LL) += debug.o
endif
all: kernel.o $(head-y) init_task.o
EXTRA_TARGETS := $(head-y) init_task.o
include $(TOPDIR)/Rules.make
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
O_TARGET := arc.o
......@@ -19,8 +16,8 @@ export-objs := oldlatches.o
obj-$(CONFIG_DEBUG_LL) += debug.o
all: arc.o head.o
include $(TOPDIR)/Rules.make
EXTRA_TARGETS := head.o
AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR)
include $(TOPDIR)/Rules.make
......@@ -2,15 +2,9 @@
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o head.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o
export-objs := ksyms.o
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := -traditional
all: kernel.o head.o init_task.o
EXTRA_TARGETS := head.o init_task.o
O_TARGET := kernel.o
......@@ -36,4 +29,6 @@ obj-y += setup-visws.o
obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
endif
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
......@@ -5,13 +5,9 @@
# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
#
all: dig.a
O_TARGET := dig.a
obj-y := setup.o
obj-$(CONFIG_IA64_GENERIC) += machvec.o
clean::
include $(TOPDIR)/Rules.make
......@@ -2,13 +2,9 @@
# Makefile for the ia32 kernel emulation subsystem.
#
all: ia32.o
O_TARGET := ia32.o
obj-y := ia32_entry.o sys_ia32.o ia32_ioctl.o ia32_signal.o ia32_support.o ia32_traps.o \
binfmt_elf32.o ia32_ldt.o
clean::
include $(TOPDIR)/Rules.make
......@@ -2,9 +2,8 @@
# Makefile for the linux kernel.
#
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs := ia64_ksyms.o
......
......@@ -32,14 +32,10 @@
# http://oss.sgi.com/projects/GenInfo/NoticeExplan
#
EXTRA_CFLAGS := -DLITTLE_ENDIAN
all: sn1.a
O_TARGET := sn1.a
O_TARGET = sn1.a
obj-y := cache.o error.o iomv.o synergy.o sn1_smp.o
obj-y = cache.o error.o iomv.o synergy.o sn1_smp.o
clean::
EXTRA_CFLAGS := -DLITTLE_ENDIAN
include $(TOPDIR)/Rules.make
......@@ -32,14 +32,11 @@
# http://oss.sgi.com/projects/GenInfo/NoticeExplan
#
EXTRA_CFLAGS := -DLITTLE_ENDIAN
all: sn2.a
O_TARGET = sn2.a
O_TARGET := sn2.a
obj-y = cache.o iomv.o sn2_smp.o
obj-y := cache.o iomv.o sn2_smp.o
clean::
EXTRA_CFLAGS := -DLITTLE_ENDIAN
include $(TOPDIR)/Rules.make
#
# Makefile for Linux arch/m68k/fpsp040 source directory
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := -traditional
OS_TARGET := fpsp.o
O_TARGET := fpsp.o
OS_OBJS := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
obj-y := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
kernel_ex.o res_func.o round.o sacos.o sasin.o satan.o satanh.o \
scosh.o setox.o sgetem.o sint.o slog2.o slogn.o \
smovecr.o srem_mod.o scale.o \
......@@ -19,11 +12,9 @@ OS_OBJS := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
all: $(OS_TARGET)
EXTRA_AFLAGS := -traditional
EXTRA_LDFLAGS := -x
include $(TOPDIR)/Rules.make
$(OS_OBJS): fpsp.h
$(OS_TARGET): $(OS_OBJS) fpsp.h
$(LD) -x -r -o $(OS_TARGET) $(OS_OBJS)
......@@ -4,17 +4,11 @@
# License. See the file "README.legal" in the main directory of this archive
# for more details.
EXTRA_AFLAGS := -traditional
OS_TARGET := ifpsp.o
O_TARGET := ifpsp.o
OS_OBJS := fskeleton.o iskeleton.o os.o
obj-y := fskeleton.o iskeleton.o os.o
all: $(OS_TARGET)
EXTRA_AFLAGS := -traditional
EXTRA_LDFLAGS := -x
include $(TOPDIR)/Rules.make
$(OS_OBJS):
$(OS_TARGET): $(OS_OBJS)
$(LD) -x -r -o $(OS_TARGET) $(OS_OBJS)
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := -traditional
O_TARGET := kernel.o
ifndef CONFIG_SUN3
all: head.o kernel.o
EXTRA_TARGETS := head.o
else
all: sun3-head.o kernel.o
EXTRA_TARGETS := sun3-head.o
endif
O_TARGET := kernel.o
export-objs := setup.o m68k_ksyms.o
obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o \
......@@ -24,6 +17,10 @@ obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o \
obj-$(CONFIG_PCI) += bios32.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
head.o: head.S m68k_defs.h
entry.o: entry.S m68k_defs.h
......@@ -39,4 +36,3 @@ m68k_defs.h: m68k_defs.c m68k_defs.head
rm m68k_defs.s
-include m68k_defs.d
include $(TOPDIR)/Rules.make
......@@ -5,14 +5,6 @@
#
# Makefile for the Alchemy Au1000 CPU, generic files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: au1000.o
O_TARGET := au1000.o
......@@ -22,7 +14,9 @@ obj-$(CONFIG_AU1000_UART) += serial.o
obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
obj-$(CONFIG_BLK_DEV_INITRD) += ramdisk.o
ramdisk.o:
mkramobj ramdisk ramdisk.o
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
ramdisk.o:
mkramobj ramdisk ramdisk.o
......@@ -5,12 +5,6 @@
#
# Makefile for the Alchemy Semiconductor PB1000 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: pb1000.o
O_TARGET := pb1000.o
......
......@@ -2,13 +2,6 @@
# Makefile for the Baget specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: baget.a
O_TARGET := baget.a
......@@ -18,10 +11,11 @@ obj-y := baget.o print.o setup.o time.o irq.o bagetIRQ.o \
obj-$(CONFIG_SERIAL) += vacserial.o
obj-$(CONFIG_VAC_RTC) += vacrtc.o
include $(TOPDIR)/Rules.make
bagetIRQ.o : bagetIRQ.S
$(CC) $(CFLAGS) -c -o $@ $<
##################### Baget Loader stuff ########################
image: ../../../vmlinux
......@@ -61,4 +55,3 @@ balo: balo.o dummy.o balo_supp.o print.o
clean:
rm -f balo balo.h dummy.c image image.bin
include $(TOPDIR)/Rules.make
#
# Makefile for the DECstation family specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
O_TARGET := dec.o
all: dec.o
export-objs := wbflush.o
obj-y := int-handler.o setup.o irq.o time.o reset.o rtc-dec.o wbflush.o
obj-$(CONFIG_PROM_CONSOLE) += promcon.o
int-handler.o: int-handler.S
include $(TOPDIR)/Rules.make
#
# Makefile for the DECstation family specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
netboot: all
mipsel-linux-ld -N -G 0 -T ld.ecoff ../../boot/zImage \
dec_boot.o ramdisk.img -o nbImage
all: dec_boot.o
O_TARGET := dec_boot.o
obj-y := decstation.o
......
......@@ -2,25 +2,14 @@
# Makefile for the DECstation prom monitor library routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
OBJS = init.o memory.o cmdline.o identify.o locore.o
L_TARGET := rexlib.a
all: rexlib.a
obj-y := init.o memory.o cmdline.o identify.o locore.o
rexlib.a: $(OBJS)
$(AR) rcs rexlib.a $(OBJS)
sync
EXTRA_AFLAGS := $(CFLAGS)
locore.o: locore.S
include $(TOPDIR)/Rules.make
dep:
$(CPP) $(CPPFLAGS) -M *.c > .depend
include $(TOPDIR)/Rules.make
......@@ -5,14 +5,6 @@
#
# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: it8172.o
O_TARGET := it8172.o
......@@ -30,4 +22,6 @@ ifdef CONFIG_REMOTE_DEBUG
obj-y += dbg_io.o
endif
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
......@@ -6,18 +6,12 @@
# Makefile for the Globespan IVR board,
# board-specific files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: ivr.o
O_TARGET := ivr.o
obj-y := init.o
obj-CONFIG_PCI += pci_fixup.o
obj-CONFIG_BLK_DEV_INITRD += le_ramdisk.o
obj-$(CONFIG_PCI) += pci_fixup.o
obj-$(CONFIG_BLK_DEV_INITRD) += le_ramdisk.o
include $(TOPDIR)/Rules.make
......@@ -6,27 +6,14 @@
# Makefile for the ITE 8172 (qed-4n-s01b) board, board
# specific files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: ite.o
O_TARGET := ite.o
obj-y := init.o
obj-$(CONFIG_PCI) += pci_fixup.o
obj-$(CONFIG_BLK_DEV_INITRD) += le_ramdisk.o
ifdef CONFIG_PCI
obj-y += pci_fixup.o
endif
ifdef CONFIG_BLK_DEV_INITRD
obj-y += le_ramdisk.o
endif
include $(TOPDIR)/Rules.make
dep:
$(CPP) -M *.c > .depend
include $(TOPDIR)/Rules.make
#
# Makefile for the Jazz family specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: jazz.o
O_TARGET := jazz.o
obj-y := int-handler.o irq.o jazzdma.o reset.o rtc-jazz.o setup.o \
floppy-jazz.o kbd-jazz.o
int-handler.o: int-handler.S
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the Linux/MIPS kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# EXTRA_AFLAGS = -mips3 -mcpu=r4000 # not used?
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
obj-y += branch.o process.o signal.o entry.o \
traps.o ptrace.o vm86.o ioport.o reset.o \
......@@ -54,7 +49,4 @@ obj-$(CONFIG_NEW_PCI) += pci.o
obj-$(CONFIG_PCI_AUTO) += pci_auto.o
endif
entry.o: entry.S
head.o: head.S
include $(TOPDIR)/Rules.make
......@@ -22,13 +22,6 @@
# Makefile for the MIPS Atlas specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: atlas.o
O_TARGET := atlas.o
......
#
# Makefile for the Philips Nino specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
O_TARGET := nino.o
all: nino.o
obj-y := int-handler.o setup.o irq.o time.o reset.o rtc.o prom.o power.o
int-handler.o: int-handler.S
obj-$(CONFIG_REMOTE_DEBUG) += kgdb.o
obj-$(CONFIG_BLK_DEV_INITRD) += ramdisk.o
include $(TOPDIR)/Rules.make
ramdisk.o:
$(MAKE) -C ramdisk
mv ramdisk/ramdisk.o ramdisk.o
......@@ -25,4 +19,3 @@ ramdisk.o:
clean:
rm -f *.o
include $(TOPDIR)/Rules.make
......@@ -2,21 +2,12 @@
# Makefile for the SGI specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
O_TARGET := ip22-kern.o
all: ip22-kern.o indyIRQ.o
obj-y += indy_mc.o indy_sc.o indy_hpc.o indy_int.o indy_rtc.o system.o \
indyIRQ.o reset.o setup.o time.o
indyIRQ.o: indyIRQ.S
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the SNI specific part of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: sni.o int-handler.o
O_TARGET := sni.o
obj-y := int-handler.o io.o irq.o pci.o pcimt_scache.o reset.o setup.o
int-handler.o: int-handler.S
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the Linux/MIPS kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs = mips64_ksyms.o
export-objs := mips64_ksyms.o
obj-y := branch.o entry.o proc.o process.o ptrace.o r4k_cache.o r4k_fpu.o \
r4k_genex.o r4k_switch.o r4k_tlb.o r4k_tlb_debug.o r4k_tlb_glue.o \
......@@ -26,5 +19,6 @@ obj-$(CONFIG_SMP) += smp.o
AFLAGS_r4k_genex.o := -P
AFLAGS_r4k_tlb_glue.o := -P
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
......@@ -22,13 +22,6 @@
# Makefile for the MIPS Atlas specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: atlas.o
O_TARGET := atlas.o
......
......@@ -21,15 +21,6 @@
#
# Makefile for the MIPS boards generic routines under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
all: mipsboards.o
O_TARGET := mipsboards.o
......@@ -37,4 +28,6 @@ obj-y := mipsIRQ.o pci.o reset.o display.o init.o \
memory.o printf.o cmdline.o time.o
obj-$(CONFIG_REMOTE_DEBUG) += gdb_hook.o
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
......@@ -22,13 +22,6 @@
# Makefile for the MIPS Malta specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: malta.o
O_TARGET := malta.o
......
......@@ -2,23 +2,15 @@
# Makefile for the SGI specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
O_TARGET := ip32-kern.a
all: ip32-kern.a ip32-irq-glue.o
EXTRA_TARGETS := ip32-irq-glue.o
obj-y += ip32-irq.o ip32-rtc.o ip32-setup.o ip32-irq-glue.o \
ip32-berr.o ip32-timer.o crime.o
ifdef CONFIG_PCI
obj-y += ip32-pci.o ip32-pci-dma.o
endif
obj-$(CONFIG_PCI) += ip32-pci.o ip32-pci-dma.o
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: hpux.o
O_TARGET = hpux.o
O_OBJS = entry_hpux.o gate.o wrappers.o fs.o ioctl.o sys_hpux.o
O_TARGET := hpux.o
obj-y := entry_hpux.o gate.o wrappers.o fs.o ioctl.o sys_hpux.o
.o.S: $(CC) -D__ASSEMBLY__ $(AFLAGS) -traditional -c $*.S -o $*.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o init_task.o pdc_cons.o process.o head.o
O_TARGET = kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o process.o pdc_cons.o
# Object file lists.
obj-y += cache.o setup.o traps.o time.o irq.o \
obj-y := cache.o setup.o traps.o time.o irq.o \
syscall.o entry.o sys_parisc.o pdc.o ptrace.o hardware.o \
inventory.o drivers.o semaphore.o pa7300lc.o pci-dma.o \
signal.o hpmc.o \
......@@ -20,7 +15,6 @@ obj-y += cache.o setup.o traps.o time.o irq.o \
export-objs := parisc_ksyms.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_VT) += keyboard.o
obj-$(CONFIG_PCI_LBA) += lba_pci.o
......
#
# Makefile for Linux arch/ppc/iSeries source directory
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
O_TARGET := iSeries.o
export-objs := iSeries_ksyms.o
......@@ -13,7 +8,7 @@ obj-y += LparData.o ItLpQueue.o HvLpEvent.o HvCall.o mf.o iSeries_proc.o mf_pr
obj-$(CONFIG_PCI) += XmPciLpEvent.o iSeries_FlightRecorder.o iSeries_IoMmTable.o iSeries_VpdInfo.o iSeries_fixup.o iSeries_irq.o iSeries_pci.o iSeries_pci_proc.o iSeries_reset_device.o
all: iSeries.o
include $(TOPDIR)/Rules.make
LparData.c:: ReleaseData.h
......@@ -23,4 +18,3 @@ ReleaseData.h: $(TOPDIR)/Makefile
clean:
rm -f ReleaseData.h
include $(TOPDIR)/Rules.make
......@@ -3,11 +3,6 @@
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
ifdef CONFIG_PPC64BRIDGE
EXTRA_AFLAGS := -Wa,-mppc64bridge
......@@ -25,9 +20,8 @@ HEAD-$(CONFIG_4xx) := head_4xx.o
HEAD-$(CONFIG_8xx) := head_8xx.o
HEAD-$(CONFIG_PPC_ISERIES) := iSeries_head.o
all: $(HEAD-y) kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := $(HEAD-y)
export-objs := ppc_ksyms.o time.o ppc405_dma.o
......
......@@ -3,11 +3,6 @@
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
ifdef CONFIG_PPC64BRIDGE
EXTRA_AFLAGS := -Wa,-mppc64bridge
......@@ -19,8 +14,6 @@ endif
# Extra CFLAGS so we don't have to do relative includes
CFLAGS_pmac_setup.o += -I$(TOPDIR)/arch/$(ARCH)/mm
all: platform.o
O_TARGET := platform.o
export-objs := prep_setup.o
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_CFLAGS = -mno-minimal-toc
KHEAD := head.o
all: $(KHEAD) kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := $(KHEAD)
export-objs := ppc_ksyms.o setup.o
......
......@@ -32,7 +32,7 @@ HEAD := arch/s390/kernel/head.o arch/s390/kernel/init_task.o
SUBDIRS := $(SUBDIRS) arch/s390/mm arch/s390/kernel arch/s390/lib \
drivers/s390 arch/s390/math-emu
CORE_FILES := arch/s390/mm/mm.o arch/s390/kernel/kernel.o $(CORE_FILES)
DRIVERS := $(DRIVERS) drivers/s390/io.o
DRIVERS := $(DRIVERS) drivers/s390/built-in.o
LIBS := $(TOPDIR)/arch/s390/lib/lib.a $(LIBS) $(TOPDIR)/arch/s390/lib/lib.a
ifeq ($(CONFIG_MATHEMU),y)
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_AFLAGS := -traditional
EXTRA_TARGETS := head.o init_task.o
export-objs := debug.o ebcdic.o irq.o s390_ext.o smp.o s390_ksyms.o
obj-y := entry.o bitmap.o traps.o time.o process.o irq.o \
......@@ -26,5 +18,7 @@ obj-$(CONFIG_SMP) += smp.o
#
obj-$(CONFIG_REMOTE_DEBUG) += gdb-stub.o #gdb-low.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
# s390/Makefile
# s390x/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
......@@ -33,7 +33,7 @@ HEAD := arch/s390x/kernel/head.o arch/s390x/kernel/init_task.o
SUBDIRS := $(SUBDIRS) arch/s390x/mm arch/s390x/kernel arch/s390x/lib \
drivers/s390
CORE_FILES := arch/s390x/mm/mm.o arch/s390x/kernel/kernel.o $(CORE_FILES)
DRIVERS := $(DRIVERS) drivers/s390/io.o
DRIVERS := $(DRIVERS) drivers/s390/built-in.o
LIBS := $(TOPDIR)/arch/s390x/lib/lib.a $(LIBS) $(TOPDIR)/arch/s390x/lib/lib.a
all: image listing
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_AFLAGS := -traditional
EXTRA_TARGETS := head.o init_task.o
export-objs := debug.o ebcdic.o irq.o s390_ext.o smp.o s390_ksyms.o \
exec32.o
......@@ -31,9 +23,12 @@ obj-$(CONFIG_REMOTE_DEBUG) += gdb-stub.o #gdb-low.o
obj-$(CONFIG_S390_SUPPORT) += linux32.o signal32.o ioctl32.o wrapper32.o exec32.o
obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
#
# This is just to get the dependencies...
#
binfmt_elf32.o: $(TOPDIR)/fs/binfmt_elf.c
include $(TOPDIR)/Rules.make
#
# Makefile for the Linux/SuperH kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: kernel.o head.o init_task.o
clean:
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs := io.o io_generic.o io_hd64461.o setup_hd64461.o sh_ksyms.o
......
#
# Makefile for STMicroelectronics board specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: stboards.o
O_TARGET := stboards.o
obj-y := irq.o setup.o mach.o led.o
clean:
obj-y := irq.o setup.o mach.o led.o
include $(TOPDIR)/Rules.make
# $Id: Makefile,v 1.62 2000/12/15 00:41:17 davem Exp $
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
SH = $(CONFIG_SHELL)
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
EXTRA_AFLAGS := -ansi
......@@ -34,8 +28,7 @@ ifdef CONFIG_SUNOS_EMUL
obj-y += sys_sunos.o sunos_ioctl.o
endif
head.o: head.S
$(CC) $(AFLAGS) -ansi -c $*.S -o $*.o
include $(TOPDIR)/Rules.make
check_asm: FORCE
@if [ ! -r $(HPATH)/asm/asm_offsets.h ] ; then \
......@@ -126,6 +119,3 @@ check_asm: FORCE
else \
mv -f asm_offsets.h $(HPATH)/asm/asm_offsets.h; \
fi
include $(TOPDIR)/Rules.make
......@@ -6,9 +6,8 @@ SH = $(CONFIG_SHELL)
EXTRA_AFLAGS := -ansi
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs := sparc64_ksyms.o
obj-y := process.o setup.o cpu.o idprom.o \
......@@ -32,10 +31,6 @@ else
endif
endif
head.o: head.S ttable.S itlb_base.S dtlb_base.S dtlb_backend.S dtlb_prot.S \
etrap.S rtrap.S winfixup.S entry.S
$(CC) $(AFLAGS) -ansi -c $*.S -o $*.o
#
# This is just to get the dependencies...
#
......@@ -48,3 +43,6 @@ else
endif
include $(TOPDIR)/Rules.make
head.o: head.S ttable.S itlb_base.S dtlb_base.S dtlb_backend.S dtlb_prot.S \
etrap.S rtrap.S winfixup.S entry.S
......@@ -2,14 +2,11 @@
# Makefile for the ia32 kernel emulation subsystem.
#
export-objs := ia32_ioctl.o
O_TARGET := ia32.o
all: ia32.o
export-objs := ia32_ioctl.o
O_TARGET := ia32.o
obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o ia32_signal.o \
ia32_binfmt.o fpu32.o socket32.o ptrace32.o
clean::
include $(TOPDIR)/Rules.make
......@@ -2,12 +2,8 @@
# Makefile for the linux kernel.
#
EXTRA_AFLAGS := -traditional
all: kernel.o head.o head64.o init_task.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o head64.o init_task.o
export-objs := mtrr.o msr.o cpuid.o x8664_ksyms.o
......@@ -31,5 +27,7 @@ obj-$(CONFIG_X86_IO_APIC) += io_apic.o mpparse.o
#obj-$(CONFIG_ACPI_SLEEP) += acpi_wakeup.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
......@@ -9,43 +9,43 @@
mod-subdirs := dio mtd sbus video macintosh usb input telephony sgi ide \
message scsi md ieee1394 pnp isdn atm \
fc4 i2c acpi bluetooth input/serio \
input/gameport parport hotplug
input/gameport parport hotplug \
base char block misc net media cdrom
subdir-y := base char block net misc media cdrom
subdir-m := $(subdir-y)
subdir-$(CONFIG_PARPORT) += parport
subdir-$(CONFIG_HOTPLUG_PCI) += hotplug
subdir-$(CONFIG_DIO) += dio
subdir-$(CONFIG_PCI) += pci
subdir-$(CONFIG_PCMCIA) += pcmcia
subdir-$(CONFIG_MTD) += mtd
subdir-$(CONFIG_SBUS) += sbus
subdir-$(CONFIG_ZORRO) += zorro
subdir-$(CONFIG_NUBUS) += nubus
subdir-$(CONFIG_TC) += tc
subdir-$(CONFIG_VT) += video
subdir-$(CONFIG_MAC) += macintosh
subdir-$(CONFIG_ALL_PPC) += macintosh
subdir-$(CONFIG_USB) += usb
subdir-$(CONFIG_INPUT) += input
subdir-$(CONFIG_SERIO) += input/serio
subdir-$(CONFIG_GAMEPORT) += input/gameport
subdir-$(CONFIG_PHONE) += telephony
subdir-$(CONFIG_SGI) += sgi
subdir-$(CONFIG_IDE) += ide
subdir-$(CONFIG_SCSI) += scsi
subdir-$(CONFIG_I2O) += message
subdir-$(CONFIG_FUSION) += message
subdir-$(CONFIG_MD) += md
subdir-$(CONFIG_IEEE1394) += ieee1394
subdir-$(CONFIG_PNP) += pnp
subdir-$(CONFIG_ISDN) += isdn
subdir-$(CONFIG_ATM) += atm
subdir-$(CONFIG_FC4) += fc4
subdir-$(CONFIG_I2C) += i2c
subdir-$(CONFIG_ACPI) += acpi
subdir-$(CONFIG_BLUEZ) += bluetooth
obj-$(CONFIG_ACPI) += acpi/
obj-$(CONFIG_PCI) += pci/
obj-$(CONFIG_PARPORT) += parport/
obj-y += base/ char/ block/ misc/ net/ media/
obj-$(CONFIG_NUBUS) += nubus/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_FC4) += fc4/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_FUSION) += message/
obj-$(CONFIG_IEEE1394) += ieee1394/
obj-y += cdrom/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_PCMCIA) += pcmcia/
obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
obj-$(CONFIG_ZORRO) += zorro/
obj-$(CONFIG_ALL_PPC) += macintosh/
obj-$(CONFIG_MAC) += macintosh/
obj-$(CONFIG_PNP) += pnp/
obj-$(CONFIG_SGI) += sgi/
obj-$(CONFIG_VT) += video/
obj-$(CONFIG_PARIDE) += block/paride/
obj-$(CONFIG_TC) += tc/
obj-$(CONFIG_USB) += usb/
obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_GAMEPORT) += input/gameport/
obj-$(CONFIG_SERIO) += input/serio/
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_I2C) += i2c/
obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BLUEZ) += bluetooth/
obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
obj-$(CONFIG_ISDN) += isdn/
include $(TOPDIR)/Rules.make
#
# Makefile for the Acorn-specific Linux kernel device drivers.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (not a .c file).
subdir-y := char
subdir-m := $(subdir-y)
# the BLOCK subdir is included from drivers/block now
# the SCSI subdir is included from drivers/scsi now
# the NET subdir is included from drivers/net now
include $(TOPDIR)/Rules.make
......@@ -2,14 +2,6 @@
# Makefile for the Acorn block device drivers.
#
O_TARGET := acorn-block.o
obj-y :=
obj-m :=
obj-n :=
obj- :=
export-objs :=
fd1772_mod-objs := fd1772.o fd1772dma.o
mfmhd_mod-objs := mfmhd.o mfm.o
......
#
# Makefile for the kernel character device drivers.
# Makefile for the acorn character device drivers.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now inherited from the
# parent makes..
#
O_TARGET := acorn-char.o
# Object file lists.
obj-y :=
obj-m :=
obj-n :=
obj- :=
# All the objects that export symbols.
export-objs := mouse_rpc.o
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux ACPI interpreter
#
O_TARGET := acpi.o
export ACPI_CFLAGS
ACPI_CFLAGS := -D_LINUX -I$(CURDIR)/include
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux network (ATM) device drivers.
#
O_TARGET := atm.o
export-objs := uPD98402.o suni.o idt77105.o
obj-y := atmdev_init.o
......
O_TARGET := base.o
# Makefile for the Linux device tree
obj-y := core.o sys.o interface.o fs.o power.o bus.o
......
......@@ -8,8 +8,6 @@
# In the future, some of these should be built conditionally.
#
O_TARGET := block.o
export-objs := elevator.o ll_rw_blk.o blkpg.o loop.o DAC960.o genhd.o block_ioctl.o
obj-y := elevator.o ll_rw_blk.o blkpg.o genhd.o block_ioctl.o
......@@ -33,6 +31,4 @@ obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
obj-$(CONFIG_BLK_DEV_UMEM) += umem.o
obj-$(CONFIG_BLK_DEV_NBD) += nbd.o
subdir-$(CONFIG_PARIDE) += paride
include $(TOPDIR)/Rules.make
......@@ -2,21 +2,14 @@
# Makefile for Bluetooth HCI device drivers.
#
O_TARGET := bluetooth.o
list-multi := hci_uart.o
obj-$(CONFIG_BLUEZ_HCIUSB) += hci_usb.o
obj-$(CONFIG_BLUEZ_HCIVHCI) += hci_vhci.o
obj-$(CONFIG_BLUEZ_HCIUART) += hci_uart.o
uart-y := hci_ldisc.o
uart-$(CONFIG_BLUEZ_HCIUART_H4) += hci_h4.o
obj-$(CONFIG_BLUEZ_HCIDTL1) += dtl1_cs.o
obj-$(CONFIG_BLUEZ_HCIBLUECARD) += bluecard_cs.o
include $(TOPDIR)/Rules.make
hci_uart-y := hci_ldisc.o
hci_uart-$(CONFIG_BLUEZ_HCIUART_H4) += hci_h4.o
hci_uart-objs := $(hci_uart-y)
hci_uart.o: $(uart-y)
$(LD) -r -o $@ $(uart-y)
include $(TOPDIR)/Rules.make
......@@ -3,9 +3,6 @@
# 30 Jan 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
# Rewritten to use lists instead of if-statements.
O_TARGET := driver.o
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
......
......@@ -7,8 +7,6 @@
#
FONTMAPFILE = cp437.uni
O_TARGET := char.o
obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
# All of the (potential) objects that export symbols.
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux kernel pci hotplug controller drivers.
#
O_TARGET := vmlinux-obj.o
export-objs := pci_hotplug_core.o pci_hotplug_util.o
obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o
......
......@@ -2,8 +2,6 @@
# Makefile for the kernel i2c bus driver.
#
O_TARGET := i2c.o
export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
i2c-algo-ite.o i2c-proc.o
......
......@@ -8,15 +8,9 @@
# In the future, some of these should be built conditionally.
#
O_TARGET := idedriver.o
export-objs := ide-taskfile.o main.o ide.o ide-features.o ide-probe.o quirks.o pcidma.o tcq.o \
atapi.o ataraid.o
obj-y :=
obj-m :=
ide-obj-y :=
obj-$(CONFIG_BLK_DEV_HD) += hd.o
obj-$(CONFIG_BLK_DEV_IDE) += ide-mod.o
obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o
......
......@@ -2,8 +2,6 @@
# Makefile for the Linux IEEE 1394 implementation
#
O_TARGET := ieee1394drv.o
export-objs := ieee1394_core.o ohci1394.o cmp.o
ieee1394-objs := ieee1394_core.o ieee1394_transactions.o hosts.o \
......
......@@ -2,10 +2,6 @@
# Makefile for the input core drivers.
#
# The target object and module list name.
O_TARGET := inputdrv.o
# Objects that export symbols.
mod-subdirs := joystick
......
......@@ -2,10 +2,6 @@
# Makefile for the gameport drivers.
#
# The target object and module list name.
O_TARGET := gamedrv.o
# Objects that export symbols.
export-objs := gameport.o
......
......@@ -2,10 +2,6 @@
# Makefile for the input core drivers.
#
# The target object and module list name.
O_TARGET := seriodrv.o
# Objects that export symbols.
export-objs := serio.o
......
# Makefile for the kernel ISDN subsystem and device drivers.
# The target object and module list name.
O_TARGET := vmlinux-obj.o
# Object files in subdirectories
mod-subdirs := i4l hisax capi eicon
......
#
# Makefile for the Macintosh-specific device drivers.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now inherited from the
# parent makes..
#
# The target object and module list name.
O_TARGET := macintosh.o
# Objects that export symbols.
......
......@@ -2,8 +2,6 @@
# Makefile for the kernel software RAID and LVM drivers.
#
O_TARGET := mddev.o
export-objs := md.o xor.o
lvm-mod-objs := lvm.o lvm-snap.o lvm-fs.o
......
#
# Makefile for the kernel multimedia device drivers.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now inherited from the
# parent makes..
#
subdir-y := video radio
mod-subdirs := video radio
O_TARGET := media.o
obj-y := $(join $(subdir-y),$(subdir-y:%=/%.o))
obj-y := video/ radio/
include $(TOPDIR)/Rules.make
......@@ -2,15 +2,6 @@
# Makefile for the kernel character device drivers.
#
# Object file lists.
obj-y :=
obj-m :=
obj-n :=
obj- :=
O_TARGET := radio.o
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
......
......@@ -2,15 +2,6 @@
# Makefile for the kernel character device drivers.
#
# Object file lists.
obj-y :=
obj-m :=
obj-n :=
obj- :=
O_TARGET := video.o
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
......
......@@ -2,8 +2,6 @@
# Makefile for MPT based block devices
#
O_TARGET := message.o
mod-subdirs := i2o fusion
obj-$(CONFIG_I2O) += i2o/
......
#
# Makefile for misc devices that really don't fit anywhere else.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now inherited from the
# parent makes..
#
O_TARGET := misc.o
include $(TOPDIR)/Rules.make
fastdep:
......@@ -5,19 +5,11 @@
# $Id: Makefile,v 1.63 2001/06/13 09:43:07 dwmw2 Exp $
obj-y += chips/chipslink.o maps/mapslink.o \
devices/devlink.o nand/nandlink.o
obj-m :=
obj-n :=
obj- :=
O_TARGET := mtdlink.o
mod-subdirs := chips maps devices nand
export-objs := mtdcore.o mtdpart.o redboot.o bootldr.o afs.o
mod-subdirs :=
subdir-y := chips maps devices nand
subdir-m := $(subdir-y)
obj-y += chips/ maps/ devices/ nand/
# *** BIG UGLY NOTE ***
#
......
......@@ -3,8 +3,6 @@
#
# $Id: Makefile,v 1.7 2001/10/05 06:53:51 dwmw2 Exp $
O_TARGET := chipslink.o
export-objs := chipreg.o gen_probe.o
# *** BIG UGLY NOTE ***
......
......@@ -3,8 +3,6 @@
#
# $Id: Makefile,v 1.4 2001/06/26 21:10:05 spse Exp $
O_TARGET := devlink.o
# *** BIG UGLY NOTE ***
#
# The removal of get_module_symbol() and replacement with
......
......@@ -3,8 +3,6 @@
#
# $Id: Makefile,v 1.13 2001/08/16 15:16:58 rmk Exp $
O_TARGET := mapslink.o
# Chip mappings
obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
......
......@@ -3,8 +3,6 @@
#
# $Id: Makefile,v 1.5 2001/09/19 22:39:59 dwmw2 Exp $
O_TARGET := nandlink.o
export-objs := nand.o nand_ecc.o
nandobjs-y := nand.o
......
# File: drivers/net/Makefile
#
# Makefile for the Linux network (ethercard) device drivers.
#
obj-y :=
obj-m :=
obj-n :=
obj- :=
mod-subdirs := appletalk arcnet fc irda tokenring tulip pcmcia wireless \
wan ../acorn/net
O_TARGET := net.o
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
......
#
# Makefile for the kernel Parallel port device drivers.
#
# Note! Parport is the Borg. We have assimilated some other
# drivers in the `char', `net' and `scsi' directories,
# but left them there to allay suspicion.
#
# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
# Rewritten to use lists instead of if-statements.
#
O_TARGET := driver.o
export-objs := init.o parport_pc.o
......
#
# Makefile for the PCI bus specific drivers.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definition is now inherited from the
# parent makefile.
#
O_TARGET := driver.o
export-objs := access.o hotplug.o pci-driver.o pci.o pool.o probe.o proc.o search.o
......
......@@ -2,8 +2,6 @@
# Makefile for the kernel pcmcia subsystem (c/o David Hinds)
#
O_TARGET := pcmcia.o
export-objs := ds.o cs.o yenta.o pci_socket.o
obj-$(CONFIG_PCMCIA) += pcmcia_core.o ds.o
......
......@@ -2,8 +2,6 @@
# Makefile for the kernel Plug-and-Play device drivers.
#
O_TARGET := pnp.o
export-objs := isapnp.o pnpbios_core.o
isa-pnp-proc-$(CONFIG_PROC_FS) = isapnp_proc.o
......
......@@ -2,14 +2,11 @@
# Makefile for the S/390 specific device drivers
#
O_TARGET := io.o
mod-subdirs := block char misc net
subdir-y := block char misc net
subdir-m := $(subdir-y)
obj-y := s390io.o s390mach.o s390dyn.o idals.o ccwcache.o
export-objs += ccwcache.o idals.o s390dyn.o s390io.o
obj-y += $(foreach dir,$(subdir-y),$(dir)/s390-$(dir).o)
obj-y += s390io.o s390mach.o s390dyn.o idals.o ccwcache.o
obj-y += block/ char/ misc/ net/
include $(TOPDIR)/Rules.make
......@@ -2,8 +2,6 @@
# S/390 block devices
#
O_TARGET := s390-block.o
export-objs := dasd.o
dasd_eckd_mod-objs := dasd_eckd.o dasd_3990_erp.o dasd_9343_erp.o
......
......@@ -2,8 +2,6 @@
# S/390 character devices
#
O_TARGET := s390-char.o
export-objs := hwc_rw.o
tub3270-objs := tuball.o tubfs.o tubtty.o \
......
......@@ -2,8 +2,6 @@
# S/390 miscellaneous devices
#
O_TARGET := s390-misc.o
obj-$(CONFIG_CHANDEV) += chandev.o
export-objs += chandev.o
......
......@@ -2,8 +2,6 @@
# S/390 network devices
#
O_TARGET := s390-net.o
export-objs := iucv.o fsm.o
ctc-objs := ctcmain.o ctctty.o
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
O_TARGET := sbus_all.o
ifneq ($(ARCH),m68k)
obj-y := sbus.o dvma.o
endif
subdir-y += char
subdir-m += char
obj-$(CONFIG_SBUSCHAR) += char/sunchar.o
subdir-y += audio
subdir-m += audio
mod-subdirs := char audio
# This is grotty but works around some problems with modules.
ifeq ($(CONFIG_SPARCAUDIO),y)
obj-y += audio/sparcaudio.o
endif
obj-$(CONFIG_SBUSCHAR) += char/
obj-$(CONFIG_SPARCAUDIO) += audio/
include $(TOPDIR)/Rules.make
......@@ -5,8 +5,6 @@
# Rewritten to use lists instead of if-statements.
#
O_TARGET := sparcaudio.o
export-objs := audio.o amd7930.o dbri.o
obj-$(CONFIG_SPARCAUDIO) += audio.o
......
......@@ -7,8 +7,6 @@
# Rewritten to use lists instead of if-statements.
#
O_TARGET := sunchar.o
export-objs := su.o bbc_i2c.o
obj-y := sunkbd.o sunkbdmap.o sunmouse.o sunserial.o zs.o
......
......@@ -18,9 +18,6 @@ CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
O_TARGET := scsidrv.o
export-objs := scsi_syms.o 53c700.o
mod-subdirs := pcmcia ../acorn/scsi
......
......@@ -5,8 +5,8 @@
#
# Character and Audio devices for SGI machines.
#
subdir-y += char
subdir-m += char
obj-y += char/sgichar.o
obj-y += char/
include $(TOPDIR)/Rules.make
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
O_TARGET := sgichar.o
export-objs := newport.o shmiq.o sgicons.o usema.o
obj-y := newport.o shmiq.o sgicons.o usema.o streamable.o
......
#
# Makefile for drivers/telephony
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
obj-y :=
obj-n :=
obj-m :=
obj- :=
export-objs := phonedev.o ixj.o
obj-$(CONFIG_PHONE) += phonedev.o
obj-$(CONFIG_PHONE_IXJ) += ixj.o
obj-$(CONFIG_PHONE_IXJ_PCMCIA) += ixj_pcmcia.o
O_TARGET := telephony.o
include $(TOPDIR)/Rules.make
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment