Skip to content

L
linux
Commit 79c45812 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits)
  powerpc: Remove unused 'protect4gb' boot parameter
  powerpc: Build-in e1000e for pseries & ppc64_defconfig
  powerpc/pseries: Make request_ras_irqs() available to other pseries code
  powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity
  powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim
  powerpc: Use smt_snooze_delay=-1 to always busy loop
  powerpc: Remove check of ibm,smt-snooze-delay OF property
  powerpc/kdump: Fix race in kdump shutdown
  powerpc/kexec: Fix race in kexec shutdown
  powerpc/kexec: Speedup kexec hash PTE tear down
  powerpc/pseries: Add hcall to read 4 ptes at a time in real mode
  powerpc: Use more accurate limit for first segment memory allocations
  powerpc/kdump: Use chip->shutdown to disable IRQs
  powerpc/kdump: CPUs assume the context of the oopsing CPU
  powerpc/crashdump: Do not fail on NULL pointer dereferencing
  powerpc/eeh: Fix oops when probing in early boot
  powerpc/pci: Check devices status property when scanning OF tree
  powerpc/vio: Switch VIO Bus PM to use generic helpers
  powerpc: Avoid bad relocations in iSeries code
  powerpc: Use common cpu_die (fixes SMP+SUSPEND build)
  ...
parents 59534f72 99ec28f1
Expand all Show whitespace changes
Inline Side-by-side
Showing with 4203 additions and 1198 deletions
Documentation/powerpc/dts-bindings/4xx/reboot.txt 0 → 100644
View file @ 79c45812
Reboot property to control system reboot on PPC4xx systems:
By setting "reset_type" to one of the following values, the default
software reset mechanism may be overidden. Here the possible values of
"reset_type":
1 - PPC4xx core reset
2 - PPC4xx chip reset
3 - PPC4xx system reset (default)
Example:
cpu@0 {
device_type = "cpu";
model = "PowerPC,440SPe";
...
reset-type = <2>; /* Use chip-reset */
};
Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
View file @ 79c45812
......@@ -11,7 +11,7 @@ Required properties:
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ.
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
......@@ -38,3 +38,23 @@ Example of gpio-controller nodes for a MPC8347 SoC:
See booting-without-of.txt for details of how to specify GPIO
information for devices.
To use GPIO pins as interrupt sources for peripherals, specify the
GPIO controller as the interrupt parent and define GPIO number +
trigger mode using the interrupts property, which is defined like
this:
interrupts = <number trigger>, where:
- number: GPIO pin (0..31)
- trigger: trigger mode:
2 = trigger on falling edge
3 = trigger on both edges
Example of device using this is:
funkyfpga@0 {
compatible = "funky-fpga";
...
interrupts = <4 3>;
interrupt-parent = <&gpio1>;
};
arch/powerpc/Kconfig
View file @ 79c45812
......@@ -140,6 +140,7 @@ config PPC
select HAVE_SYSCALL_WRAPPERS if PPC64
select GENERIC_ATOMIC64 if PPC32
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
config EARLY_PRINTK
bool
......
arch/powerpc/Kconfig.debug
View file @ 79c45812
......@@ -44,6 +44,18 @@ config DEBUG_STACK_USAGE
This option will slow down process creation somewhat.
config DEBUG_PER_CPU_MAPS
bool "Debug access to per_cpu maps"
depends on DEBUG_KERNEL
depends on SMP
default n
---help---
Say Y to verify that the per_cpu map being accessed has
been setup. Adds a fair amount of code to kernel memory
and decreases performance.
Say N if unsure.
config HCALL_STATS
bool "Hypervisor call instrumentation"
depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
......
arch/powerpc/boot/Makefile
View file @ 79c45812
......@@ -44,6 +44,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
......@@ -77,7 +78,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
gamecube-head.S gamecube.c wii-head.S wii.c
gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
......@@ -169,7 +170,7 @@ quiet_cmd_wrap = WRAP $@
$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
image-$(CONFIG_PPC_MAPLE) += zImage.pseries
image-$(CONFIG_PPC_MAPLE) += zImage.maple
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
image-$(CONFIG_PPC_PS3) += dtbImage.ps3
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
......@@ -206,6 +207,8 @@ image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
image-$(CONFIG_WARP) += cuImage.warp
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
......@@ -351,7 +354,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
simpleImage.* otheros.bld *.dtb
zImage.maple simpleImage.* otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
......
arch/powerpc/boot/dts/iss4xx-mpic.dts 0 → 100644
View file @ 79c45812
/*
* Device Tree Source for IBM Embedded PPC 476 Platform
*
* Copyright 2010 Torez Smith, IBM Corporation.
*
* Based on earlier code:
* Copyright (c) 2006, 2007 IBM Corp.
* Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/memreserve/ 0x01f00000 0x00100000;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "ibm,iss-4xx";
compatible = "ibm,iss-4xx";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
serial0 = &UART0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <0>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "ok";
};
cpu@1 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <1>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0 0x01f00100>;
};
cpu@2 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <2>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0 0x01f00200>;
};
cpu@3 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <3>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0 0x01f00300>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
};
MPIC: interrupt-controller {
compatible = "chrp,open-pic";
interrupt-controller;
dcr-reg = <0xffc00000 0x00030000>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
plb {
compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; // Filled in by zImage
POB0: opb {
compatible = "ibm,opb-4xx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
ranges = <0x00000000 0x00000001 0x00000000 0x80000000
0x80000000 0x00000001 0x80000000 0x80000000>;
clock-frequency = <0>; // Filled in by zImage
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550a";
reg = <0x40000200 0x00000008>;
virtual-reg = <0xe0000200>;
clock-frequency = <11059200>;
current-speed = <115200>;
interrupt-parent = <&MPIC>;
interrupts = <0x0 0x2>;
};
};
};
nvrtc {
compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
reg = <0 0xEF703000 0x2000>;
};
iss-block {
compatible = "ibm,iss-sim-block-device";
reg = <0 0xEF701000 0x1000>;
};
chosen {
linux,stdout-path = "/plb/opb/serial@40000200";
};
};
arch/powerpc/boot/dts/iss4xx.dts 0 → 100644
View file @ 79c45812
/*
* Device Tree Source for IBM Embedded PPC 476 Platform
*
* Copyright 2010 Torez Smith, IBM Corporation.
*
* Based on earlier code:
* Copyright (c) 2006, 2007 IBM Corp.
* Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "ibm,iss-4xx";
compatible = "ibm,iss-4xx";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
serial0 = &UART0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <0x00000000>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>; // may need fixup in sim
d-cache-line-size = <32>; // may need fixup in sim
i-cache-size = <32768>; /* may need fixup in sim */
d-cache-size = <32768>; /* may need fixup in sim */
dcr-controller;
dcr-access-method = "native";
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-4xx", "ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic-4xx", "ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
plb {
compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; // Filled in by zImage
POB0: opb {
compatible = "ibm,opb-4xx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
ranges = <0x00000000 0x00000001 0x00000000 0x80000000
0x80000000 0x00000001 0x80000000 0x80000000>;
clock-frequency = <0>; // Filled in by zImage
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550a";
reg = <0x40000200 0x00000008>;
virtual-reg = <0xe0000200>;
clock-frequency = <11059200>;
current-speed = <115200>;
interrupt-parent = <&UIC0>;
interrupts = <0x0 0x4>;
};
};
};
nvrtc {
compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
reg = <0 0xEF703000 0x2000>;
};
iss-block {
compatible = "ibm,iss-sim-block-device";
reg = <0 0xEF701000 0x1000>;
};
chosen {
linux,stdout-path = "/plb/opb/serial@40000200";
};
};
arch/powerpc/boot/dts/mpc8315erdb.dts
View file @ 79c45812
......@@ -292,7 +292,7 @@ crypto@30000 {
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
fsl,descriptor-types-mask = <0x3ab0abf>;
fsl,descriptor-types-mask = <0x3a30abf>;
};
sata@18000 {
......@@ -463,4 +463,18 @@ pcie@0 {
0 0x00800000>;
};
};
leds {
compatible = "gpio-leds";
pwr {
gpios = <&mcu_pio 0 0>;
default-state = "on";
};
hdd {
gpios = <&mcu_pio 1 0>;
linux,default-trigger = "ide-disk";
};
};
};
arch/powerpc/boot/dts/mpc8377_rdb.dts
View file @ 79c45812
......@@ -486,4 +486,18 @@ pcie@0 {
0 0x00800000>;
};
};
leds {
compatible = "gpio-leds";
pwr {
gpios = <&mcu_pio 0 0>;
default-state = "on";
};
hdd {
gpios = <&mcu_pio 1 0>;
linux,default-trigger = "ide-disk";
};
};
};
arch/powerpc/boot/dts/mpc8378_rdb.dts
View file @ 79c45812
......@@ -470,4 +470,18 @@ pcie@0 {
0 0x00800000>;
};
};
leds {
compatible = "gpio-leds";
pwr {
gpios = <&mcu_pio 0 0>;
default-state = "on";
};
hdd {
gpios = <&mcu_pio 1 0>;
linux,default-trigger = "ide-disk";
};
};
};
arch/powerpc/boot/dts/mpc8379_rdb.dts
View file @ 79c45812
......@@ -436,4 +436,18 @@ pci0: pci@e0008500 {
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
leds {
compatible = "gpio-leds";
pwr {
gpios = <&mcu_pio 0 0>;
default-state = "on";
};
hdd {
gpios = <&mcu_pio 1 0>;
linux,default-trigger = "ide-disk";
};
};
};
arch/powerpc/boot/dts/p1020rdb.dts
View file @ 79c45812
......@@ -19,6 +19,9 @@ / {
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
};
......@@ -346,6 +349,122 @@ dma-channel@180 {
};
};
mdio@24000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-mdio";
reg = <0x24000 0x1000 0xb0030 0x4>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
};
};
mdio@25000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-tbi";
reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb0000 0x1000>;
interrupts = <29 2 30 2 34 2>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb4000 0x1000>;
interrupts = <17 2 18 2 24 2>;
};
};
enet1: ethernet@b1000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb1000 0x1000>;
interrupts = <35 2 36 2 40 2>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb5000 0x1000>;
interrupts = <51 2 52 2 67 2>;
};
};
enet2: ethernet@b2000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb2000 0x1000>;
interrupts = <31 2 32 2 33 2>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb6000 0x1000>;
interrupts = <25 2 26 2 27 2>;
};
};
usb@22000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -356,6 +475,11 @@ usb@22000 {
phy_type = "ulpi";
};
/* USB2 is shared with localbus, so it must be disabled
by default. We can't put 'status = "disabled";' here
since U-Boot doesn't clear the status property when
it enables USB2. OTOH, U-Boot does create a new node
when there isn't any. So, just comment it out.
usb@23000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -365,6 +489,7 @@ usb@23000 {
interrupts = <46 0x2>;
phy_type = "ulpi";
};
*/
sdhci@2e000 {
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
......
arch/powerpc/boot/treeboot-iss4xx.c 0 → 100644
View file @ 79c45812
/*
* Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
*
* Based on earlier code:
* Copyright (C) Paul Mackerras 1997.
*
* Matt Porter <mporter@kernel.crashing.org>
* Copyright 2002-2005 MontaVista Software Inc.
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
*
* Copyright 2007 David Gibson, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stdarg.h>
#include <stddef.h>
#include "types.h"
#include "elf.h"
#include "string.h"
#include "stdio.h"
#include "page.h"
#include "ops.h"
#include "reg.h"
#include "io.h"
#include "dcr.h"
#include "4xx.h"
#include "44x.h"
#include "libfdt.h"
BSS_STACK(4096);
static void iss_4xx_fixups(void)
{
ibm4xx_sdram_fixup_memsize();
}
#define SPRN_PIR 0x11E /* Processor Indentification Register */
void platform_init(void)
{
unsigned long end_of_ram = 0x08000000;
unsigned long avail_ram = end_of_ram - (unsigned long)_end;
u32 pir_reg;
simple_alloc_init(_end, avail_ram, 128, 64);
platform_ops.fixups = iss_4xx_fixups;
platform_ops.exit = ibm44x_dbcr_reset;
pir_reg = mfspr(SPRN_PIR);
fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
fdt_init(_dtb_start);
serial_console_init();
}
arch/powerpc/boot/wrapper
View file @ 79c45812
......@@ -149,6 +149,10 @@ pseries)
platformo=$object/of.o
link_address='0x4000000'
;;
maple)
platformo=$object/of.o
link_address='0x400000'
;;
pmac|chrp)
platformo=$object/of.o
;;
......@@ -237,6 +241,9 @@ gamecube|wii)
link_address='0x600000'
platformo="$object/$platform-head.o $object/$platform.o"
;;
treeboot-iss4xx-mpic)
platformo="$object/treeboot-iss4xx.o"
;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
......@@ -321,7 +328,7 @@ fi
# post-processing needed for some platforms
case "$platform" in
pseries|chrp)
pseries|chrp|maple)
$objbin/addnote "$ofile"
;;
coff)
......
arch/powerpc/configs/44x/iss476-smp_defconfig 0 → 100644
View file @ 79c45812
This diff is collapsed.
arch/powerpc/configs/ppc64_defconfig
View file @ 79c45812
......@@ -988,7 +988,7 @@ CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=m
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
......
arch/powerpc/configs/pseries_defconfig
View file @ 79c45812
......@@ -804,7 +804,7 @@ CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=m
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
......
arch/powerpc/include/asm/cache.h
View file @ 79c45812
......@@ -12,8 +12,12 @@
#define L1_CACHE_SHIFT 6
#define MAX_COPY_PREFETCH 4
#elif defined(CONFIG_PPC32)
#define L1_CACHE_SHIFT 5
#define MAX_COPY_PREFETCH 4
#if defined(CONFIG_PPC_47x)
#define L1_CACHE_SHIFT 7
#else
#define L1_CACHE_SHIFT 5
#endif
#else /* CONFIG_PPC64 */
#define L1_CACHE_SHIFT 7
#endif
......
arch/powerpc/include/asm/cputable.h
View file @ 79c45812
......@@ -72,6 +72,7 @@ extern int machine_check_4xx(struct pt_regs *regs);
extern int machine_check_440A(struct pt_regs *regs);
extern int machine_check_e500(struct pt_regs *regs);
extern int machine_check_e200(struct pt_regs *regs);
extern int machine_check_47x(struct pt_regs *regs);
/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
struct cpu_spec {
......@@ -365,6 +366,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_440x6 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \
CPU_FTR_INDEXED_DCR)
#define CPU_FTRS_47X (CPU_FTRS_440x6)
#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_UNIFIED_ID_CACHE | CPU_FTR_NOEXECUTE)
......@@ -453,6 +455,9 @@ enum {
#ifdef CONFIG_44x
CPU_FTRS_44X | CPU_FTRS_440x6 |
#endif
#ifdef CONFIG_PPC_47x
CPU_FTRS_47X |
#endif
#ifdef CONFIG_E200
CPU_FTRS_E200 |
#endif
......
arch/powerpc/include/asm/hvcall.h
View file @ 79c45812
......@@ -228,6 +228,7 @@
#define H_JOIN 0x298
#define H_VASI_STATE 0x2A4
#define H_ENABLE_CRQ 0x2B0
#define H_GET_EM_PARMS 0x2B8
#define H_SET_MPP 0x2D0
#define H_GET_MPP 0x2D4
#define MAX_HCALL_OPCODE H_GET_MPP
......@@ -281,6 +282,7 @@ long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
*/
#define PLPAR_HCALL9_BUFSIZE 9
long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...);
/* For hcall instrumentation. One structure per-hcall, per-CPU */
struct hcall_stats {
......
arch/powerpc/include/asm/kexec.h
View file @ 79c45812
......@@ -31,6 +31,10 @@
#define KEXEC_ARCH KEXEC_ARCH_PPC
#endif
#define KEXEC_STATE_NONE 0
#define KEXEC_STATE_IRQS_OFF 1
#define KEXEC_STATE_REAL_MODE 2
#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
#include <asm/reg.h>
......
arch/powerpc/include/asm/mmu-44x.h
View file @ 79c45812
......@@ -40,7 +40,7 @@
#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */
#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */
#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */
#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */
#define PPC44x_TLB_E 0x00000080 /* Memory is little endian */
#define PPC44x_TLB_PERM_MASK 0x0000003f
#define PPC44x_TLB_UX 0x00000020 /* User execution */
......@@ -53,6 +53,52 @@
/* Number of TLB entries */
#define PPC44x_TLB_SIZE 64
/* 47x bits */
#define PPC47x_MMUCR_TID 0x0000ffff
#define PPC47x_MMUCR_STS 0x00010000
/* Page identification fields */
#define PPC47x_TLB0_EPN_MASK 0xfffff000 /* Effective Page Number */
#define PPC47x_TLB0_VALID 0x00000800 /* Valid flag */
#define PPC47x_TLB0_TS 0x00000400 /* Translation address space */
#define PPC47x_TLB0_4K 0x00000000
#define PPC47x_TLB0_16K 0x00000010
#define PPC47x_TLB0_64K 0x00000030
#define PPC47x_TLB0_1M 0x00000070
#define PPC47x_TLB0_16M 0x000000f0
#define PPC47x_TLB0_256M 0x000001f0
#define PPC47x_TLB0_1G 0x000003f0
#define PPC47x_TLB0_BOLTED_R 0x00000008 /* tlbre only */
/* Translation fields */
#define PPC47x_TLB1_RPN_MASK 0xfffff000 /* Real Page Number */
#define PPC47x_TLB1_ERPN_MASK 0x000003ff
/* Storage attribute and access control fields */
#define PPC47x_TLB2_ATTR_MASK 0x0003ff80
#define PPC47x_TLB2_IL1I 0x00020000 /* Memory is guarded */
#define PPC47x_TLB2_IL1D 0x00010000 /* Memory is guarded */
#define PPC47x_TLB2_U0 0x00008000 /* User 0 */
#define PPC47x_TLB2_U1 0x00004000 /* User 1 */
#define PPC47x_TLB2_U2 0x00002000 /* User 2 */
#define PPC47x_TLB2_U3 0x00001000 /* User 3 */
#define PPC47x_TLB2_W 0x00000800 /* Caching is write-through */
#define PPC47x_TLB2_I 0x00000400 /* Caching is inhibited */
#define PPC47x_TLB2_M 0x00000200 /* Memory is coherent */
#define PPC47x_TLB2_G 0x00000100 /* Memory is guarded */
#define PPC47x_TLB2_E 0x00000080 /* Memory is little endian */
#define PPC47x_TLB2_PERM_MASK 0x0000003f
#define PPC47x_TLB2_UX 0x00000020 /* User execution */
#define PPC47x_TLB2_UW 0x00000010 /* User write */
#define PPC47x_TLB2_UR 0x00000008 /* User read */
#define PPC47x_TLB2_SX 0x00000004 /* Super execution */
#define PPC47x_TLB2_SW 0x00000002 /* Super write */
#define PPC47x_TLB2_SR 0x00000001 /* Super read */
#define PPC47x_TLB2_U_RWX (PPC47x_TLB2_UX|PPC47x_TLB2_UW|PPC47x_TLB2_UR)
#define PPC47x_TLB2_S_RWX (PPC47x_TLB2_SX|PPC47x_TLB2_SW|PPC47x_TLB2_SR)
#define PPC47x_TLB2_S_RW (PPC47x_TLB2_SW | PPC47x_TLB2_SR)
#define PPC47x_TLB2_IMG (PPC47x_TLB2_I | PPC47x_TLB2_M | PPC47x_TLB2_G)
#ifndef __ASSEMBLY__
extern unsigned int tlb_44x_hwater;
......@@ -79,12 +125,15 @@ typedef struct {
#if (PAGE_SHIFT == 12)
#define PPC44x_TLBE_SIZE PPC44x_TLB_4K
#define PPC47x_TLBE_SIZE PPC47x_TLB0_4K
#define mmu_virtual_psize MMU_PAGE_4K
#elif (PAGE_SHIFT == 14)
#define PPC44x_TLBE_SIZE PPC44x_TLB_16K
#define PPC47x_TLBE_SIZE PPC47x_TLB0_16K
#define mmu_virtual_psize MMU_PAGE_16K
#elif (PAGE_SHIFT == 16)
#define PPC44x_TLBE_SIZE PPC44x_TLB_64K
#define PPC47x_TLBE_SIZE PPC47x_TLB0_64K
#define mmu_virtual_psize MMU_PAGE_64K
#elif (PAGE_SHIFT == 18)
#define PPC44x_TLBE_SIZE PPC44x_TLB_256K
......
arch/powerpc/include/asm/mmu.h
View file @ 79c45812
......@@ -18,6 +18,7 @@
#define MMU_FTR_TYPE_44x ASM_CONST(0x00000008)
#define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010)
#define MMU_FTR_TYPE_3E ASM_CONST(0x00000020)
#define MMU_FTR_TYPE_47x ASM_CONST(0x00000040)
/*
* This is individual features
......
arch/powerpc/include/asm/mmzone.h
View file @ 79c45812
......@@ -30,7 +30,7 @@ extern struct pglist_data *node_data[];
*/
extern int numa_cpu_lookup_table[];
extern cpumask_t numa_cpumask_lookup_table[];
extern cpumask_var_t node_to_cpumask_map[];
#ifdef CONFIG_MEMORY_HOTPLUG
extern unsigned long max_pfn;
#endif
......
arch/powerpc/include/asm/mpic.h
View file @ 79c45812
......@@ -463,9 +463,6 @@ extern void mpic_cpu_set_priority(int prio);
/* Request IPIs on primary mpic */
extern void mpic_request_ipis(void);
/* Send an IPI (non offseted number 0..3) */
extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
/* Send a message (IPI) to a given target (cpu number or MSG_*) */
void smp_mpic_message_pass(int target, int msg);
......
arch/powerpc/include/asm/paca.h
View file @ 79c45812
......@@ -82,6 +82,7 @@ struct paca_struct {
s16 hw_cpu_id; /* Physical processor number */
u8 cpu_start; /* At startup, processor spins until */
/* this becomes non-zero. */
u8 kexec_state; /* set when kexec down has irqs off */
#ifdef CONFIG_PPC_STD_MMU_64
struct slb_shadow *slb_shadow_ptr;
......
arch/powerpc/include/asm/parport.h
View file @ 79c45812
......@@ -19,6 +19,8 @@ static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
u32 io1, io2;
int propsize;
int count = 0;
int virq;
for (np = NULL; (np = of_find_compatible_node(np,
"parallel",
"pnpPNP,400")) != NULL;) {
......@@ -26,10 +28,13 @@ static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
if (!prop || propsize > 6*sizeof(u32))
continue;
io1 = prop[1]; io2 = prop[2];
prop = of_get_property(np, "interrupts", NULL);
if (!prop)
virq = irq_of_parse_and_map(np, 0);
if (virq == NO_IRQ)
continue;
if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
if (parport_pc_probe_port(io1, io2, virq, autodma, NULL, 0)
!= NULL)
count++;
}
return count;
......
arch/powerpc/include/asm/pgalloc-64.h
View file @ 79c45812
......@@ -11,6 +11,12 @@
#include <linux/cpumask.h>
#include <linux/percpu.h>
struct vmemmap_backing {
struct vmemmap_backing *list;
unsigned long phys;
unsigned long virt_addr;
};
/*
* Functions that deal with pagetables that could be at any level of
* the table need to be passed an "index_size" so they know how to
......
arch/powerpc/include/asm/pgtable-ppc32.h
View file @ 79c45812
......@@ -287,7 +287,7 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
#define pmd_page_vaddr(pmd) \
((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
#define pmd_page(pmd) \
(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
#else
#define pmd_page_vaddr(pmd) \
((unsigned long) (pmd_val(pmd) & PAGE_MASK))
......
arch/powerpc/include/asm/ptrace.h
View file @ 79c45812
......@@ -89,6 +89,7 @@ struct pt_regs {
#define instruction_pointer(regs) ((regs)->nip)
#define user_stack_pointer(regs) ((regs)->gpr[1])
#define kernel_stack_pointer(regs) ((regs)->gpr[1])
#define regs_return_value(regs) ((regs)->gpr[3])
#ifdef CONFIG_SMP
......@@ -141,6 +142,69 @@ do { \
#define arch_has_block_step() (!cpu_has_feature(CPU_FTR_601))
#define ARCH_HAS_USER_SINGLE_STEP_INFO
/*
* kprobe-based event tracer support
*/
#include <linux/stddef.h>
#include <linux/thread_info.h>
extern int regs_query_register_offset(const char *name);
extern const char *regs_query_register_name(unsigned int offset);
#define MAX_REG_OFFSET (offsetof(struct pt_regs, dsisr))
/**
* regs_get_register() - get register value from its offset
* @regs: pt_regs from which register value is gotten
* @offset: offset number of the register.
*
* regs_get_register returns the value of a register whose offset from @regs.
* The @offset is the offset of the register in struct pt_regs.
* If @offset is bigger than MAX_REG_OFFSET, this returns 0.
*/
static inline unsigned long regs_get_register(struct pt_regs *regs,
unsigned int offset)
{
if (unlikely(offset > MAX_REG_OFFSET))
return 0;
return *(unsigned long *)((unsigned long)regs + offset);
}
/**
* regs_within_kernel_stack() - check the address in the stack
* @regs: pt_regs which contains kernel stack pointer.
* @addr: address which is checked.
*
* regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
* If @addr is within the kernel stack, it returns true. If not, returns false.
*/
static inline bool regs_within_kernel_stack(struct pt_regs *regs,
unsigned long addr)
{
return ((addr & ~(THREAD_SIZE - 1)) ==
(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
}
/**
* regs_get_kernel_stack_nth() - get Nth entry of the stack
* @regs: pt_regs which contains kernel stack pointer.
* @n: stack entry number.
*
* regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
* is specified by @regs. If the @n th entry is NOT in the kernel stack,
* this returns 0.
*/
static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
unsigned int n)
{
unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
addr += n;
if (regs_within_kernel_stack(regs, (unsigned long)addr))
return *addr;
else
return 0;
}
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
......
arch/powerpc/include/asm/reg.h
View file @ 79c45812
......@@ -817,6 +817,7 @@
#define PVR_403GC 0x00200200
#define PVR_403GCX 0x00201400
#define PVR_405GP 0x40110000
#define PVR_476 0x11a52000
#define PVR_STB03XXX 0x40310000
#define PVR_NP405H 0x41410000
#define PVR_NP405L 0x41610000
......@@ -853,6 +854,9 @@
#define PVR_8245 0x80811014
#define PVR_8260 PVR_8240
/* 476 Simulator seems to currently have the PVR of the 602... */
#define PVR_476_ISS 0x00052000
/* 64-bit processors */
/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
#define PV_NORTHSTAR 0x0033
......
arch/powerpc/include/asm/reg_booke.h
View file @ 79c45812
......@@ -191,6 +191,10 @@
#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
#define PPC47x_MCSR_GPR 0x01000000 /* GPR parity error */
#define PPC47x_MCSR_FPR 0x00800000 /* FPR parity error */
#define PPC47x_MCSR_IPR 0x00400000 /* Imprecise Machine Check Exception */
#ifdef CONFIG_E500
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
......@@ -604,5 +608,25 @@
#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
#endif /* 403GCX */
/* Some 476 specific registers */
#define SPRN_SSPCR 830
#define SPRN_USPCR 831
#define SPRN_ISPCR 829
#define SPRN_MMUBE0 820
#define MMUBE0_IBE0_SHIFT 24
#define MMUBE0_IBE1_SHIFT 16
#define MMUBE0_IBE2_SHIFT 8
#define MMUBE0_VBE0 0x00000004
#define MMUBE0_VBE1 0x00000002
#define MMUBE0_VBE2 0x00000001
#define SPRN_MMUBE1 821
#define MMUBE1_IBE3_SHIFT 24
#define MMUBE1_IBE4_SHIFT 16
#define MMUBE1_IBE5_SHIFT 8
#define MMUBE1_VBE3 0x00000004
#define MMUBE1_VBE4 0x00000002
#define MMUBE1_VBE5 0x00000001
#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
#endif /* __KERNEL__ */
arch/powerpc/include/asm/smp.h
View file @ 79c45812
......@@ -40,7 +40,7 @@ extern void smp_message_recv(int);
DECLARE_PER_CPU(unsigned int, cpu_pvr);
#ifdef CONFIG_HOTPLUG_CPU
extern void fixup_irqs(cpumask_t map);
extern void fixup_irqs(const struct cpumask *map);
int generic_cpu_disable(void);
int generic_cpu_enable(unsigned int cpu);
void generic_cpu_die(unsigned int cpu);
......@@ -68,8 +68,19 @@ static inline void set_hard_smp_processor_id(int cpu, int phys)
}
#endif
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
DECLARE_PER_CPU(cpumask_t, cpu_core_map);
DECLARE_PER_CPU(cpumask_var_t, cpu_sibling_map);
DECLARE_PER_CPU(cpumask_var_t, cpu_core_map);
static inline struct cpumask *cpu_sibling_mask(int cpu)
{
return per_cpu(cpu_sibling_map, cpu);
}
static inline struct cpumask *cpu_core_mask(int cpu)
{
return per_cpu(cpu_core_map, cpu);
}
extern int cpu_to_core_id(int cpu);
/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
......@@ -93,7 +104,6 @@ void smp_init_pSeries(void);
void smp_init_cell(void);
void smp_init_celleb(void);
void smp_setup_cpu_maps(void);
void smp_setup_cpu_sibling_map(void);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
......
arch/powerpc/include/asm/topology.h
View file @ 79c45812
......@@ -8,6 +8,26 @@ struct device_node;
#ifdef CONFIG_NUMA
/*
* Before going off node we want the VM to try and reclaim from the local
* node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
* With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
* 20, we never reclaim and go off node straight away.
*
* To fix this we choose a smaller value of RECLAIM_DISTANCE.
*/
#define RECLAIM_DISTANCE 10
/*
* Before going off node we want the VM to try and reclaim from the local
* node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
* With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
* 20, we never reclaim and go off node straight away.
*
* To fix this we choose a smaller value of RECLAIM_DISTANCE.
*/
#define RECLAIM_DISTANCE 10
#include <asm/mmzone.h>
static inline int cpu_to_node(int cpu)
......@@ -19,7 +39,7 @@ static inline int cpu_to_node(int cpu)
#define cpumask_of_node(node) ((node) == -1 ? \
cpu_all_mask : \
&numa_cpumask_lookup_table[node])
node_to_cpumask_map[node])
int of_node_to_nid(struct device_node *device);
......@@ -102,8 +122,8 @@ static inline void sysfs_remove_device_from_node(struct sys_device *dev,
#ifdef CONFIG_PPC64
#include <asm/smp.h>
#define topology_thread_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (&per_cpu(cpu_core_map, cpu))
#define topology_thread_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_core_id(cpu) (cpu_to_core_id(cpu))
#endif
#endif
......
arch/powerpc/kernel/asm-offsets.c
View file @ 79c45812
......@@ -183,6 +183,7 @@ int main(void)
#endif /* CONFIG_PPC_STD_MMU_64 */
DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
......@@ -447,6 +448,14 @@ int main(void)
DEFINE(PGD_T_LOG2, PGD_T_LOG2);
DEFINE(PTE_T_LOG2, PTE_T_LOG2);
#endif
#ifdef CONFIG_FSL_BOOKE
DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
DEFINE(TLBCAM_MAS0, offsetof(struct tlbcam, MAS0));
DEFINE(TLBCAM_MAS1, offsetof(struct tlbcam, MAS1));
DEFINE(TLBCAM_MAS2, offsetof(struct tlbcam, MAS2));
DEFINE(TLBCAM_MAS3, offsetof(struct tlbcam, MAS3));
DEFINE(TLBCAM_MAS7, offsetof(struct tlbcam, MAS7));
#endif
#ifdef CONFIG_KVM_EXIT_TIMING
DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
......
arch/powerpc/kernel/cputable.c
View file @ 79c45812
......@@ -1701,6 +1701,35 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
{ /* 476 core */
.pvr_mask = 0xffff0000,
.pvr_value = 0x11a50000,
.cpu_name = "476",
.cpu_features = CPU_FTRS_47X,
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_47x |
MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
.icache_bsize = 32,
.dcache_bsize = 128,
.machine_check = machine_check_47x,
.platform = "ppc470",
},
{ /* 476 iss */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00050000,
.cpu_name = "476",
.cpu_features = CPU_FTRS_47X,
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_FPU,
.cpu_user_features = COMMON_USER_BOOKE,
.mmu_features = MMU_FTR_TYPE_47x |
MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
.icache_bsize = 32,
.dcache_bsize = 128,
.machine_check = machine_check_47x,
.platform = "ppc470",
},
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
......
arch/powerpc/kernel/crash.c
View file @ 79c45812
......@@ -162,6 +162,32 @@ static void crash_kexec_prepare_cpus(int cpu)
/* Leave the IPI callback set */
}
/* wait for all the CPUs to hit real mode but timeout if they don't come in */
static void crash_kexec_wait_realmode(int cpu)
{
unsigned int msecs;
int i;
msecs = 10000;
for (i=0; i < NR_CPUS && msecs > 0; i++) {
if (i == cpu)
continue;
while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
barrier();
if (!cpu_possible(i)) {
break;
}
if (!cpu_online(i)) {
break;
}
msecs--;
mdelay(1);
}
}
mb();
}
/*
* This function will be called by secondary cpus or by kexec cpu
* if soft-reset is activated to stop some CPUs.
......@@ -347,9 +373,11 @@ int crash_shutdown_unregister(crash_shutdown_t handler)
EXPORT_SYMBOL(crash_shutdown_unregister);
static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
static int crash_shutdown_cpu = -1;
static int handle_fault(struct pt_regs *regs)
{
if (crash_shutdown_cpu == smp_processor_id())
longjmp(crash_shutdown_buf, 1);
return 0;
}
......@@ -375,11 +403,14 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
for_each_irq(i) {
struct irq_desc *desc = irq_to_desc(i);
if (!desc || !desc->chip || !desc->chip->eoi)
continue;
if (desc->status & IRQ_INPROGRESS)
desc->chip->eoi(i);
if (!(desc->status & IRQ_DISABLED))
desc->chip->disable(i);
desc->chip->shutdown(i);
}
/*
......@@ -388,6 +419,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
*/
old_handler = __debugger_fault_handler;
__debugger_fault_handler = handle_fault;
crash_shutdown_cpu = smp_processor_id();
for (i = 0; crash_shutdown_handles[i]; i++) {
if (setjmp(crash_shutdown_buf) == 0) {
/*
......@@ -401,6 +433,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
asm volatile("sync; isync");
}
}
crash_shutdown_cpu = -1;
__debugger_fault_handler = old_handler;
/*
......@@ -412,6 +445,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
crash_kexec_prepare_cpus(crashing_cpu);
cpu_set(crashing_cpu, cpus_in_crash);
crash_kexec_stop_spus();
crash_kexec_wait_realmode(crashing_cpu);
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0);
}
arch/powerpc/kernel/entry_32.S
View file @ 79c45812
......@@ -373,11 +373,13 @@ syscall_exit_cont:
bnel- load_dbcr0
#endif
#ifdef CONFIG_44x
BEGIN_MMU_FTR_SECTION
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
bne- 2f
1:
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_47x)
#endif /* CONFIG_44x */
BEGIN_FTR_SECTION
lwarx r7,0,r1
......@@ -848,6 +850,9 @@ resume_kernel:
/* interrupts are hard-disabled at this point */
restore:
#ifdef CONFIG_44x
BEGIN_MMU_FTR_SECTION
b 1f
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
......
arch/powerpc/kernel/exceptions-64s.S
View file @ 79c45812
......@@ -735,8 +735,11 @@ _STATIC(do_hash_page)
std r3,_DAR(r1)
std r4,_DSISR(r1)
andis. r0,r4,0xa450 /* weird error? */
andis. r0,r4,0xa410 /* weird error? */
bne- handle_page_fault /* if not, try to insert a HPTE */
andis. r0,r4,DSISR_DABRMATCH@h
bne- handle_dabr_fault
BEGIN_FTR_SECTION
andis. r0,r4,0x0020 /* Is it a segment table fault? */
bne- do_ste_alloc /* If so handle it */
......@@ -823,6 +826,14 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
bl .raw_local_irq_restore
b 11f
/* We have a data breakpoint exception - handle it */
handle_dabr_fault:
ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_dabr
b .ret_from_except_lite
/* Here we have a page fault that hash_page can't handle. */
handle_page_fault:
ENABLE_INTS
......
arch/powerpc/kernel/head_44x.S
View file @ 79c45812
This diff is collapsed.
arch/powerpc/kernel/head_8xx.S
View file @ 79c45812
......@@ -71,9 +71,6 @@ _ENTRY(_start);
* in the first level table, but that would require many changes to the
* Linux page directory/table functions that I don't want to do right now.
*
* I used to use SPRG2 for a temporary register in the TLB handler, but it
* has since been put to other uses. I now use a hack to save a register
* and the CCR at memory location 0.....Someday I'll fix this.....
* -- Dan
*/
.globl __start
......@@ -302,8 +299,13 @@ InstructionTLBMiss:
DO_8xx_CPU6(0x3f80, r3)
mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
mfcr r10
#ifdef CONFIG_8xx_CPU6
stw r10, 0(r0)
stw r11, 4(r0)
#else
mtspr SPRN_DAR, r10
mtspr SPRN_SPRG2, r11
#endif
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
#ifdef CONFIG_8xx_CPU15
addi r11, r10, 0x1000
......@@ -318,12 +320,16 @@ InstructionTLBMiss:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
#ifdef CONFIG_MODULES
/* Only modules will cause ITLB Misses as we always
* pin the first 8MB of kernel memory */
andi. r11, r10, 0x0800 /* Address >= 0x80000000 */
beq 3f
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
rlwimi r10, r11, 0, 2, 19
3:
#endif
lwz r11, 0(r10) /* Get the level 1 entry */
rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
beq 2f /* If zero, don't try to find a pte */
......@@ -339,31 +345,35 @@ InstructionTLBMiss:
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
#ifdef CONFIG_SWAP
andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
bne- cr0, 2f
/* Clear PP lsb, 0x400 */
rlwinm r10, r10, 0, 22, 20
#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 22 and 28 must be clear.
* Software indicator bits 21 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior
* of the MMU.
*/
li r11, 0x00f0
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */
DO_8xx_CPU6(0x2d80, r3)
mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
mfspr r10, SPRN_M_TW /* Restore registers */
/* Restore registers */
#ifndef CONFIG_8xx_CPU6
mfspr r10, SPRN_DAR
mtcr r10
mtspr SPRN_DAR, r11 /* Tag DAR */
mfspr r11, SPRN_SPRG2
#else
lwz r11, 0(r0)
mtcr r11
lwz r11, 4(r0)
#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
mfspr r10, SPRN_M_TW
rfi
2:
mfspr r11, SPRN_SRR1
......@@ -373,13 +383,20 @@ InstructionTLBMiss:
rlwinm r11, r11, 0, 0xffff
mtspr SPRN_SRR1, r11
mfspr r10, SPRN_M_TW /* Restore registers */
/* Restore registers */
#ifndef CONFIG_8xx_CPU6
mfspr r10, SPRN_DAR
mtcr r10
li r11, 0x00f0
mtspr SPRN_DAR, r11 /* Tag DAR */
mfspr r11, SPRN_SPRG2
#else
lwz r11, 0(r0)
mtcr r11
lwz r11, 4(r0)
#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
mfspr r10, SPRN_M_TW
b InstructionAccess
. = 0x1200
......@@ -390,8 +407,13 @@ DataStoreTLBMiss:
DO_8xx_CPU6(0x3f80, r3)
mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
mfcr r10
#ifdef CONFIG_8xx_CPU6
stw r10, 0(r0)
stw r11, 4(r0)
#else
mtspr SPRN_DAR, r10
mtspr SPRN_SPRG2, r11
#endif
mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
/* If we are faulting a kernel address, we have to use the
......@@ -438,15 +460,14 @@ DataStoreTLBMiss:
* r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
* r10 = (r10 & ~PRESENT) | r11;
*/
#ifdef CONFIG_SWAP
rlwinm r11, r10, 32-5, _PAGE_PRESENT
and r11, r11, r10
rlwimi r10, r11, 0, _PAGE_PRESENT
#endif
/* Honour kernel RO, User NA */
/* 0x200 == Extended encoding, bit 22 */
/* r11 = (r10 & _PAGE_USER) >> 2 */
rlwinm r11, r10, 32-2, 0x200
or r10, r11, r10
rlwimi r10, r10, 32-2, 0x200 /* Copy USER to bit 22, 0x200 */
/* r11 = (r10 & _PAGE_RW) >> 1 */
rlwinm r11, r10, 32-1, 0x200
or r10, r11, r10
......@@ -460,18 +481,24 @@ DataStoreTLBMiss:
* of the MMU.
*/
2: li r11, 0x00f0
mtspr SPRN_DAR,r11 /* Tag DAR */
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
DO_8xx_CPU6(0x3d80, r3)
mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
mfspr r10, SPRN_M_TW /* Restore registers */
/* Restore registers */
#ifndef CONFIG_8xx_CPU6
mfspr r10, SPRN_DAR
mtcr r10
mtspr SPRN_DAR, r11 /* Tag DAR */
mfspr r11, SPRN_SPRG2
#else
mtspr SPRN_DAR, r11 /* Tag DAR */
lwz r11, 0(r0)
mtcr r11
lwz r11, 4(r0)
#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
#endif
mfspr r10, SPRN_M_TW
rfi
/* This is an instruction TLB error on the MPC8xx. This could be due
......@@ -683,9 +710,6 @@ start_here:
tophys(r4,r2)
addi r4,r4,THREAD /* init task's THREAD */
mtspr SPRN_SPRG_THREAD,r4
li r3,0
/* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */
/* stack */
lis r1,init_thread_union@ha
......
arch/powerpc/kernel/head_booke.h
View file @ 79c45812
#ifndef __HEAD_BOOKE_H__
#define __HEAD_BOOKE_H__
#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
/*
* Macros used for common Book-e exception handling
*/
......@@ -48,6 +49,9 @@
stw r10,0(r11); \
rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
stw r0,GPR0(r11); \
lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \
addi r10, r10, STACK_FRAME_REGS_MARKER@l; \
stw r10, 8(r11); \
SAVE_4GPRS(3, r11); \
SAVE_2GPRS(7, r11)
......
arch/powerpc/kernel/head_fsl_booke.S
View file @ 79c45812
......@@ -639,6 +639,13 @@ interrupt_base:
rlwinm r12,r12,0,16,1
mtspr SPRN_MAS1,r12
/* Make up the required permissions for kernel code */
#ifdef CONFIG_PTE_64BIT
li r13,_PAGE_PRESENT | _PAGE_BAP_SX
oris r13,r13,_PAGE_ACCESSED@h
#else
li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
#endif
b 4f
/* Get the PGD for the current thread */
......@@ -646,15 +653,15 @@ interrupt_base:
mfspr r11,SPRN_SPRG_THREAD
lwz r11,PGDIR(r11)
4:
/* Make up the required permissions */
/* Make up the required permissions for user code */
#ifdef CONFIG_PTE_64BIT
li r13,_PAGE_PRESENT | _PAGE_EXEC
li r13,_PAGE_PRESENT | _PAGE_BAP_UX
oris r13,r13,_PAGE_ACCESSED@h
#else
li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
#endif
4:
FIND_PTE
andc. r13,r13,r11 /* Check permission */
......
arch/powerpc/kernel/iommu.c
View file @ 79c45812
......@@ -43,20 +43,9 @@
#define DBG(...)
static int novmerge;
static int protect4gb = 1;
static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
static int __init setup_protect4gb(char *str)
{
if (strcmp(str, "on") == 0)
protect4gb = 1;
else if (strcmp(str, "off") == 0)
protect4gb = 0;
return 1;
}
static int __init setup_iommu(char *str)
{
if (!strcmp(str, "novmerge"))
......@@ -66,7 +55,6 @@ static int __init setup_iommu(char *str)
return 1;
}
__setup("protect4gb=", setup_protect4gb);
__setup("iommu=", setup_iommu);
static unsigned long iommu_range_alloc(struct device *dev,
......
arch/powerpc/kernel/irq.c
View file @ 79c45812
......@@ -284,30 +284,33 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
}
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(cpumask_t map)
void fixup_irqs(const struct cpumask *map)
{
struct irq_desc *desc;
unsigned int irq;
static int warned;
cpumask_var_t mask;
for_each_irq(irq) {
cpumask_t mask;
alloc_cpumask_var(&mask, GFP_KERNEL);
for_each_irq(irq) {
desc = irq_to_desc(irq);
if (desc && desc->status & IRQ_PER_CPU)
continue;
cpumask_and(&mask, desc->affinity, &map);
if (any_online_cpu(mask) == NR_CPUS) {
cpumask_and(mask, desc->affinity, map);
if (cpumask_any(mask) >= nr_cpu_ids) {
printk("Breaking affinity for irq %i\n", irq);
mask = map;
cpumask_copy(mask, map);
}
if (desc->chip->set_affinity)
desc->chip->set_affinity(irq, &mask);
desc->chip->set_affinity(irq, mask);
else if (desc->action && !(warned++))
printk("Cannot set affinity for irq %i\n", irq);
}
free_cpumask_var(mask);
local_irq_enable();
mdelay(1);
local_irq_disable();
......
arch/powerpc/kernel/kprobes.c
View file @ 79c45812
......@@ -114,6 +114,9 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
regs->msr &= ~MSR_CE;
mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
#ifdef CONFIG_PPC_47x
isync();
#endif
#endif
/*
......
arch/powerpc/kernel/lparcfg.c
View file @ 79c45812
......@@ -38,7 +38,7 @@
#include <asm/vio.h>
#include <asm/mmu.h>
#define MODULE_VERS "1.8"
#define MODULE_VERS "1.9"
#define MODULE_NAME "lparcfg"
/* #define LPARCFG_DEBUG */
......@@ -487,6 +487,14 @@ static void splpar_dispatch_data(struct seq_file *m)
seq_printf(m, "dispatch_dispersions=%lu\n", dispatch_dispersions);
}
static void parse_em_data(struct seq_file *m)
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
if (plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS)
seq_printf(m, "power_mode_data=%016lx\n", retbuf[0]);
}
static int pseries_lparcfg_data(struct seq_file *m, void *v)
{
int partition_potential_processors;
......@@ -541,6 +549,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
seq_printf(m, "slb_size=%d\n", mmu_slb_size);
parse_em_data(m);
return 0;
}
......
arch/powerpc/kernel/machine_kexec_64.c
View file @ 79c45812
......@@ -155,33 +155,38 @@ void kexec_copy_flush(struct kimage *image)
#ifdef CONFIG_SMP
/* FIXME: we should schedule this function to be called on all cpus based
* on calling the interrupts, but we would like to call it off irq level
* so that the interrupt controller is clean.
*/
static int kexec_all_irq_disabled = 0;
static void kexec_smp_down(void *arg)
{
local_irq_disable();
mb(); /* make sure our irqs are disabled before we say they are */
get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
while(kexec_all_irq_disabled == 0)
cpu_relax();
mb(); /* make sure all irqs are disabled before this */
/*
* Now every CPU has IRQs off, we can clear out any pending
* IPIs and be sure that no more will come in after this.
*/
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 1);
local_irq_disable();
kexec_smp_wait();
/* NOTREACHED */
}
static void kexec_prepare_cpus(void)
static void kexec_prepare_cpus_wait(int wait_state)
{
int my_cpu, i, notified=-1;
smp_call_function(kexec_smp_down, NULL, /* wait */0);
my_cpu = get_cpu();
/* check the others cpus are now down (via paca hw cpu id == -1) */
/* Make sure each CPU has atleast made it to the state we need */
for (i=0; i < NR_CPUS; i++) {
if (i == my_cpu)
continue;
while (paca[i].hw_cpu_id != -1) {
while (paca[i].kexec_state < wait_state) {
barrier();
if (!cpu_possible(i)) {
printk("kexec: cpu %d hw_cpu_id %d is not"
......@@ -201,20 +206,35 @@ static void kexec_prepare_cpus(void)
}
if (i != notified) {
printk( "kexec: waiting for cpu %d (physical"
" %d) to go down\n",
i, paca[i].hw_cpu_id);
" %d) to enter %i state\n",
i, paca[i].hw_cpu_id, wait_state);
notified = i;
}
}
}
mb();
}
static void kexec_prepare_cpus(void)
{
smp_call_function(kexec_smp_down, NULL, /* wait */0);
local_irq_disable();
mb(); /* make sure IRQs are disabled before we say they are */
get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
kexec_prepare_cpus_wait(KEXEC_STATE_IRQS_OFF);
/* we are sure every CPU has IRQs off at this point */
kexec_all_irq_disabled = 1;
/* after we tell the others to go down */
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 0);
put_cpu();
/* Before removing MMU mapings make sure all CPUs have entered real mode */
kexec_prepare_cpus_wait(KEXEC_STATE_REAL_MODE);
local_irq_disable();
put_cpu();
}
#else /* ! SMP */
......
arch/powerpc/kernel/misc_32.S
View file @ 79c45812
......@@ -441,7 +441,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
addi r3,r3,L1_CACHE_BYTES
bdnz 0b
sync
#ifndef CONFIG_44x
#ifdef CONFIG_44x
/* We don't flush the icache on 44x. Those have a virtual icache
* and we don't have access to the virtual address here (it's
* not the page vaddr but where it's mapped in user space). The
......@@ -449,15 +449,19 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
* a change in the address space occurs, before returning to
* user space
*/
BEGIN_MMU_FTR_SECTION
blr
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x)
#endif /* CONFIG_44x */
mtctr r4
1: icbi 0,r6
addi r6,r6,L1_CACHE_BYTES
bdnz 1b
sync
isync
#endif /* CONFIG_44x */
blr
#ifndef CONFIG_BOOKE
/*
* Flush a particular page from the data cache to RAM, identified
* by its physical address. We turn off the MMU so we can just use
......@@ -490,6 +494,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
mtmsr r10 /* restore DR */
isync
blr
#endif /* CONFIG_BOOKE */
/*
* Clear pages using the dcbz instruction, which doesn't cause any
......
arch/powerpc/kernel/misc_64.S
View file @ 79c45812
......@@ -24,6 +24,7 @@
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/kexec.h>
.text
......@@ -471,6 +472,10 @@ _GLOBAL(kexec_wait)
1: mflr r5
addi r5,r5,kexec_flag-1b
li r4,KEXEC_STATE_REAL_MODE
stb r4,PACAKEXECSTATE(r13)
SYNC
99: HMT_LOW
#ifdef CONFIG_KEXEC /* use no memory without kexec */
lwz r4,0(r5)
......@@ -494,14 +499,11 @@ kexec_flag:
* note: this is a terminal routine, it does not save lr
*
* get phys id from paca
* set paca id to -1 to say we got here
* switch to real mode
* join other cpus in kexec_wait(phys_id)
*/
_GLOBAL(kexec_smp_wait)
lhz r3,PACAHWCPUID(r13)
li r4,-1
sth r4,PACAHWCPUID(r13) /* let others know we left */
bl real_mode
b .kexec_wait
......
arch/powerpc/kernel/paca.c
View file @ 79c45812
......@@ -18,6 +18,7 @@
#include <asm/pgtable.h>
#include <asm/iseries/lpar_map.h>
#include <asm/iseries/hv_types.h>
#include <asm/kexec.h>
/* This symbol is provided by the linker - let it fill in the paca
* field correctly */
......@@ -97,6 +98,7 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
new_paca->kernelbase = (unsigned long) _stext;
new_paca->kernel_msr = MSR_KERNEL;
new_paca->hw_cpu_id = 0xffff;
new_paca->kexec_state = KEXEC_STATE_NONE;
new_paca->__current = &init_task;
#ifdef CONFIG_PPC_STD_MMU_64
new_paca->slb_shadow_ptr = &slb_shadow[cpu];
......
arch/powerpc/kernel/pci_of_scan.c
View file @ 79c45812
......@@ -310,6 +310,8 @@ static void __devinit __of_scan_bus(struct device_node *node,
/* Scan direct children */
for_each_child_of_node(node, child) {
pr_debug(" * %s\n", child->full_name);
if (!of_device_is_available(child))
continue;
reg = of_get_property(child, "reg", &reglen);
if (reg == NULL || reglen < 20)
continue;
......
arch/powerpc/kernel/process.c
View file @ 79c45812
......@@ -371,6 +371,9 @@ int set_dabr(unsigned long dabr)
/* XXX should we have a CPU_FTR_HAS_DABR ? */
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
mtspr(SPRN_DAC1, dabr);
#ifdef CONFIG_PPC_47x
isync();
#endif
#elif defined(CONFIG_PPC_BOOK3S)
mtspr(SPRN_DABR, dabr);
#endif
......
arch/powerpc/kernel/ptrace.c
View file @ 79c45812
......@@ -38,6 +38,109 @@
#include <asm/pgtable.h>
#include <asm/system.h>
/*
* The parameter save area on the stack is used to store arguments being passed
* to callee function and is located at fixed offset from stack pointer.
*/
#ifdef CONFIG_PPC32
#define PARAMETER_SAVE_AREA_OFFSET 24 /* bytes */
#else /* CONFIG_PPC32 */
#define PARAMETER_SAVE_AREA_OFFSET 48 /* bytes */
#endif
struct pt_regs_offset {
const char *name;
int offset;
};
#define STR(s) #s /* convert to string */
#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
#define GPR_OFFSET_NAME(num) \
{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
#define REG_OFFSET_END {.name = NULL, .offset = 0}
static const struct pt_regs_offset regoffset_table[] = {
GPR_OFFSET_NAME(0),
GPR_OFFSET_NAME(1),
GPR_OFFSET_NAME(2),
GPR_OFFSET_NAME(3),
GPR_OFFSET_NAME(4),
GPR_OFFSET_NAME(5),
GPR_OFFSET_NAME(6),
GPR_OFFSET_NAME(7),
GPR_OFFSET_NAME(8),
GPR_OFFSET_NAME(9),
GPR_OFFSET_NAME(10),
GPR_OFFSET_NAME(11),
GPR_OFFSET_NAME(12),
GPR_OFFSET_NAME(13),
GPR_OFFSET_NAME(14),
GPR_OFFSET_NAME(15),
GPR_OFFSET_NAME(16),
GPR_OFFSET_NAME(17),
GPR_OFFSET_NAME(18),
GPR_OFFSET_NAME(19),
GPR_OFFSET_NAME(20),
GPR_OFFSET_NAME(21),
GPR_OFFSET_NAME(22),
GPR_OFFSET_NAME(23),
GPR_OFFSET_NAME(24),
GPR_OFFSET_NAME(25),
GPR_OFFSET_NAME(26),
GPR_OFFSET_NAME(27),
GPR_OFFSET_NAME(28),
GPR_OFFSET_NAME(29),
GPR_OFFSET_NAME(30),
GPR_OFFSET_NAME(31),
REG_OFFSET_NAME(nip),
REG_OFFSET_NAME(msr),
REG_OFFSET_NAME(ctr),
REG_OFFSET_NAME(link),
REG_OFFSET_NAME(xer),
REG_OFFSET_NAME(ccr),
#ifdef CONFIG_PPC64
REG_OFFSET_NAME(softe),
#else
REG_OFFSET_NAME(mq),
#endif
REG_OFFSET_NAME(trap),
REG_OFFSET_NAME(dar),
REG_OFFSET_NAME(dsisr),
REG_OFFSET_END,
};
/**
* regs_query_register_offset() - query register offset from its name
* @name: the name of a register
*
* regs_query_register_offset() returns the offset of a register in struct
* pt_regs from its name. If the name is invalid, this returns -EINVAL;
*/
int regs_query_register_offset(const char *name)
{
const struct pt_regs_offset *roff;
for (roff = regoffset_table; roff->name != NULL; roff++)
if (!strcmp(roff->name, name))
return roff->offset;
return -EINVAL;
}
/**
* regs_query_register_name() - query register name from its offset
* @offset: the offset of a register in struct pt_regs.
*
* regs_query_register_name() returns the name of a register from its
* offset in struct pt_regs. If the @offset is invalid, this returns NULL;
*/
const char *regs_query_register_name(unsigned int offset)
{
const struct pt_regs_offset *roff;
for (roff = regoffset_table; roff->name != NULL; roff++)
if (roff->offset == offset)
return roff->name;
return NULL;
}
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
......
arch/powerpc/kernel/rtas.c
View file @ 79c45812
......@@ -691,10 +691,14 @@ void rtas_os_term(char *str)
{
int status;
if (panic_timeout)
return;
if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term"))
/*
* Firmware with the ibm,extended-os-term property is guaranteed
* to always return from an ibm,os-term call. Earlier versions without
* this property may terminate the partition which we want to avoid
* since it interferes with panic_timeout.
*/
if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term") ||
RTAS_UNKNOWN_SERVICE == rtas_token("ibm,extended-os-term"))
return;
snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
......@@ -705,8 +709,7 @@ void rtas_os_term(char *str)
} while (rtas_busy_delay(status));
if (status != 0)
printk(KERN_EMERG "ibm,os-term call failed %d\n",
status);
printk(KERN_EMERG "ibm,os-term call failed %d\n", status);
}
static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
......
arch/powerpc/kernel/rtasd.c
View file @ 79c45812
......@@ -411,9 +411,9 @@ static void rtas_event_scan(struct work_struct *w)
get_online_cpus();
cpu = next_cpu(smp_processor_id(), cpu_online_map);
if (cpu == NR_CPUS) {
cpu = first_cpu(cpu_online_map);
cpu = cpumask_next(smp_processor_id(), cpu_online_mask);
if (cpu >= nr_cpu_ids) {
cpu = cpumask_first(cpu_online_mask);
if (first_pass) {
first_pass = 0;
......@@ -466,8 +466,8 @@ static void start_event_scan(void)
/* Retreive errors from nvram if any */
retreive_nvram_error_log();
schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
event_scan_delay);
schedule_delayed_work_on(cpumask_first(cpu_online_mask),
&event_scan_work, event_scan_delay);
}
static int __init rtas_init(void)
......@@ -490,6 +490,12 @@ static int __init rtas_init(void)
return -ENODEV;
}
if (!rtas_event_scan_rate) {
/* Broken firmware: take a rate of zero to mean don't scan */
printk(KERN_DEBUG "rtasd: scan rate is 0, not scanning\n");
return 0;
}
/* Make room for the sequence number */
rtas_error_log_max = rtas_get_error_log_max();
rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
......
arch/powerpc/kernel/setup-common.c
View file @ 79c45812
......@@ -161,14 +161,8 @@ extern u32 cpu_temp_both(unsigned long cpu);
DEFINE_PER_CPU(unsigned int, cpu_pvr);
#endif
static int show_cpuinfo(struct seq_file *m, void *v)
static void show_cpuinfo_summary(struct seq_file *m)
{
unsigned long cpu_id = (unsigned long)v - 1;
unsigned int pvr;
unsigned short maj;
unsigned short min;
if (cpu_id == NR_CPUS) {
struct device_node *root;
const char *model = NULL;
#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
......@@ -197,9 +191,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "Memory\t\t: %d MB\n",
(unsigned int)(total_memory / (1024 * 1024)));
#endif
}
return 0;
}
static int show_cpuinfo(struct seq_file *m, void *v)
{
unsigned long cpu_id = (unsigned long)v - 1;
unsigned int pvr;
unsigned short maj;
unsigned short min;
/* We only show online cpus: disable preempt (overzealous, I
* knew) to prevent cpu going down. */
......@@ -308,19 +307,28 @@ static int show_cpuinfo(struct seq_file *m, void *v)
#endif
preempt_enable();
/* If this is the last cpu, print the summary */
if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
show_cpuinfo_summary(m);
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
unsigned long i = *pos;
return i <= NR_CPUS ? (void *)(i + 1) : NULL;
if (*pos == 0) /* just in case, cpu 0 is not the first */
*pos = cpumask_first(cpu_online_mask);
else
*pos = cpumask_next(*pos - 1, cpu_online_mask);
if ((*pos) < nr_cpu_ids)
return (void *)(unsigned long)(*pos + 1);
return NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
(*pos)++;
return c_start(m, pos);
}
......@@ -386,14 +394,14 @@ static void __init cpu_init_thread_core_maps(int tpc)
/**
* setup_cpu_maps - initialize the following cpu maps:
* cpu_possible_map
* cpu_present_map
* cpu_possible_mask
* cpu_present_mask
*
* Having the possible map set up early allows us to restrict allocations
* of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
*
* We do not initialize the online map here; cpus set their own bits in
* cpu_online_map as they come up.
* cpu_online_mask as they come up.
*
* This function is valid only for Open Firmware systems. finish_device_tree
* must be called before using this.
......
arch/powerpc/kernel/setup_64.c
View file @ 79c45812
......@@ -424,9 +424,18 @@ void __init setup_system(void)
DBG(" <- setup_system()\n");
}
static u64 slb0_limit(void)
{
if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
return 1UL << SID_SHIFT_1T;
}
return 1UL << SID_SHIFT;
}
#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
u64 limit = slb0_limit();
unsigned int i;
/*
......@@ -436,10 +445,10 @@ static void __init irqstack_early_init(void)
for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc_base(THREAD_SIZE,
THREAD_SIZE, 0x10000000));
THREAD_SIZE, limit));
hardirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc_base(THREAD_SIZE,
THREAD_SIZE, 0x10000000));
THREAD_SIZE, limit));
}
}
#else
......@@ -470,7 +479,7 @@ static void __init exc_lvl_early_init(void)
*/
static void __init emergency_stack_init(void)
{
unsigned long limit;
u64 limit;
unsigned int i;
/*
......@@ -482,7 +491,7 @@ static void __init emergency_stack_init(void)
* bringup, we need to get at them in real mode. This means they
* must also be within the RMO region.
*/
limit = min(0x10000000ULL, lmb.rmo_size);
limit = min(slb0_limit(), lmb.rmo_size);
for_each_possible_cpu(i) {
unsigned long sp;
......@@ -573,12 +582,6 @@ void ppc64_boot_msg(unsigned int src, const char *msg)
printk("[boot]%04x %s\n", src, msg);
}
void cpu_die(void)
{
if (ppc_md.cpu_die)
ppc_md.cpu_die();
}
#ifdef CONFIG_SMP
#define PCPU_DYN_SIZE ()
......
arch/powerpc/kernel/smp.c
View file @ 79c45812
......@@ -59,8 +59,8 @@
struct thread_info *secondary_ti;
DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
DEFINE_PER_CPU(cpumask_var_t, cpu_core_map);
EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
EXPORT_PER_CPU_SYMBOL(cpu_core_map);
......@@ -271,6 +271,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
smp_store_cpu_info(boot_cpuid);
cpu_callin_map[boot_cpuid] = 1;
for_each_possible_cpu(cpu) {
zalloc_cpumask_var_node(&per_cpu(cpu_sibling_map, cpu),
GFP_KERNEL, cpu_to_node(cpu));
zalloc_cpumask_var_node(&per_cpu(cpu_core_map, cpu),
GFP_KERNEL, cpu_to_node(cpu));
}
cpumask_set_cpu(boot_cpuid, cpu_sibling_mask(boot_cpuid));
cpumask_set_cpu(boot_cpuid, cpu_core_mask(boot_cpuid));
if (smp_ops)
if (smp_ops->probe)
max_cpus = smp_ops->probe();
......@@ -289,10 +299,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
void __devinit smp_prepare_boot_cpu(void)
{
BUG_ON(smp_processor_id() != boot_cpuid);
set_cpu_online(boot_cpuid, true);
cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
#ifdef CONFIG_PPC64
paca[boot_cpuid].__current = current;
#endif
......@@ -313,7 +319,7 @@ int generic_cpu_disable(void)
set_cpu_online(cpu, false);
#ifdef CONFIG_PPC64
vdso_data->processorCount--;
fixup_irqs(cpu_online_map);
fixup_irqs(cpu_online_mask);
#endif
return 0;
}
......@@ -333,7 +339,7 @@ int generic_cpu_enable(unsigned int cpu)
cpu_relax();
#ifdef CONFIG_PPC64
fixup_irqs(cpu_online_map);
fixup_irqs(cpu_online_mask);
/* counter the irq disable in fixup_irqs */
local_irq_enable();
#endif
......@@ -462,7 +468,7 @@ int cpu_to_core_id(int cpu)
return id;
}
/* Must be called when no change can occur to cpu_present_map,
/* Must be called when no change can occur to cpu_present_mask,
* i.e. during cpu online or offline.
*/
static struct device_node *cpu_to_l2cache(int cpu)
......@@ -495,6 +501,14 @@ int __devinit start_secondary(void *unused)
current->active_mm = &init_mm;
smp_store_cpu_info(cpu);
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
/* Clear any pending timer interrupts */
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
/* Enable decrementer interrupt */
mtspr(SPRN_TCR, TCR_DIE);
#endif
set_dec(tb_ticks_per_jiffy);
preempt_disable();
cpu_callin_map[cpu] = 1;
......@@ -517,15 +531,15 @@ int __devinit start_secondary(void *unused)
for (i = 0; i < threads_per_core; i++) {
if (cpu_is_offline(base + i))
continue;
cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
cpumask_set_cpu(cpu, cpu_sibling_mask(base + i));
cpumask_set_cpu(base + i, cpu_sibling_mask(cpu));
/* cpu_core_map should be a superset of
* cpu_sibling_map even if we don't have cache
* information, so update the former here, too.
*/
cpu_set(cpu, per_cpu(cpu_core_map, base +i));
cpu_set(base + i, per_cpu(cpu_core_map, cpu));
cpumask_set_cpu(cpu, cpu_core_mask(base + i));
cpumask_set_cpu(base + i, cpu_core_mask(cpu));
}
l2_cache = cpu_to_l2cache(cpu);
for_each_online_cpu(i) {
......@@ -533,8 +547,8 @@ int __devinit start_secondary(void *unused)
if (!np)
continue;
if (np == l2_cache) {
cpu_set(cpu, per_cpu(cpu_core_map, i));
cpu_set(i, per_cpu(cpu_core_map, cpu));
cpumask_set_cpu(cpu, cpu_core_mask(i));
cpumask_set_cpu(i, cpu_core_mask(cpu));
}
of_node_put(np);
}
......@@ -554,19 +568,22 @@ int setup_profiling_timer(unsigned int multiplier)
void __init smp_cpus_done(unsigned int max_cpus)
{
cpumask_t old_mask;
cpumask_var_t old_mask;
/* We want the setup_cpu() here to be called from CPU 0, but our
* init thread may have been "borrowed" by another CPU in the meantime
* se we pin us down to CPU 0 for a short while
*/
old_mask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
alloc_cpumask_var(&old_mask, GFP_NOWAIT);
cpumask_copy(old_mask, &current->cpus_allowed);
set_cpus_allowed_ptr(current, cpumask_of(boot_cpuid));
if (smp_ops && smp_ops->setup_cpu)
smp_ops->setup_cpu(boot_cpuid);
set_cpus_allowed(current, old_mask);
set_cpus_allowed_ptr(current, old_mask);
free_cpumask_var(old_mask);
snapshot_timebases();
......@@ -591,10 +608,10 @@ int __cpu_disable(void)
/* Update sibling maps */
base = cpu_first_thread_in_core(cpu);
for (i = 0; i < threads_per_core; i++) {
cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
cpumask_clear_cpu(cpu, cpu_sibling_mask(base + i));
cpumask_clear_cpu(base + i, cpu_sibling_mask(cpu));
cpumask_clear_cpu(cpu, cpu_core_mask(base + i));
cpumask_clear_cpu(base + i, cpu_core_mask(cpu));
}
l2_cache = cpu_to_l2cache(cpu);
......@@ -603,8 +620,8 @@ int __cpu_disable(void)
if (!np)
continue;
if (np == l2_cache) {
cpu_clear(cpu, per_cpu(cpu_core_map, i));
cpu_clear(i, per_cpu(cpu_core_map, cpu));
cpumask_clear_cpu(cpu, cpu_core_mask(i));
cpumask_clear_cpu(i, cpu_core_mask(cpu));
}
of_node_put(np);
}
......@@ -631,4 +648,10 @@ void cpu_hotplug_driver_unlock()
{
mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
}
void cpu_die(void)
{
if (ppc_md.cpu_die)
ppc_md.cpu_die();
}
#endif
arch/powerpc/kernel/sysfs.c
View file @ 79c45812
......@@ -35,7 +35,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
#ifdef CONFIG_PPC64
/* Time in microseconds we delay before sleeping in the idle loop */
DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
DEFINE_PER_CPU(long, smt_snooze_delay) = { 100 };
static ssize_t store_smt_snooze_delay(struct sys_device *dev,
struct sysdev_attribute *attr,
......@@ -44,9 +44,9 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev,
{
struct cpu *cpu = container_of(dev, struct cpu, sysdev);
ssize_t ret;
unsigned long snooze;
long snooze;
ret = sscanf(buf, "%lu", &snooze);
ret = sscanf(buf, "%ld", &snooze);
if (ret != 1)
return -EINVAL;
......@@ -61,53 +61,23 @@ static ssize_t show_smt_snooze_delay(struct sys_device *dev,
{
struct cpu *cpu = container_of(dev, struct cpu, sysdev);
return sprintf(buf, "%lu\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
}
static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
store_smt_snooze_delay);
/* Only parse OF options if the matching cmdline option was not specified */
static int smt_snooze_cmdline;
static int __init smt_setup(void)
{
struct device_node *options;
const unsigned int *val;
unsigned int cpu;
if (!cpu_has_feature(CPU_FTR_SMT))
return -ENODEV;
options = of_find_node_by_path("/options");
if (!options)
return -ENODEV;
val = of_get_property(options, "ibm,smt-snooze-delay", NULL);
if (!smt_snooze_cmdline && val) {
for_each_possible_cpu(cpu)
per_cpu(smt_snooze_delay, cpu) = *val;
}
of_node_put(options);
return 0;
}
__initcall(smt_setup);
static int __init setup_smt_snooze_delay(char *str)
{
unsigned int cpu;
int snooze;
long snooze;
if (!cpu_has_feature(CPU_FTR_SMT))
return 1;
smt_snooze_cmdline = 1;
if (get_option(&str, &snooze)) {
snooze = simple_strtol(str, NULL, 10);
for_each_possible_cpu(cpu)
per_cpu(smt_snooze_delay, cpu) = snooze;
}
return 1;
}
......
arch/powerpc/kernel/traps.c
View file @ 79c45812
......@@ -380,6 +380,46 @@ int machine_check_440A(struct pt_regs *regs)
}
return 0;
}
int machine_check_47x(struct pt_regs *regs)
{
unsigned long reason = get_mc_reason(regs);
u32 mcsr;
printk(KERN_ERR "Machine check in kernel mode.\n");
if (reason & ESR_IMCP) {
printk(KERN_ERR
"Instruction Synchronous Machine Check exception\n");
mtspr(SPRN_ESR, reason & ~ESR_IMCP);
return 0;
}
mcsr = mfspr(SPRN_MCSR);
if (mcsr & MCSR_IB)
printk(KERN_ERR "Instruction Read PLB Error\n");
if (mcsr & MCSR_DRB)
printk(KERN_ERR "Data Read PLB Error\n");
if (mcsr & MCSR_DWB)
printk(KERN_ERR "Data Write PLB Error\n");
if (mcsr & MCSR_TLBP)
printk(KERN_ERR "TLB Parity Error\n");
if (mcsr & MCSR_ICP) {
flush_instruction_cache();
printk(KERN_ERR "I-Cache Parity Error\n");
}
if (mcsr & MCSR_DCSP)
printk(KERN_ERR "D-Cache Search Parity Error\n");
if (mcsr & PPC47x_MCSR_GPR)
printk(KERN_ERR "GPR Parity Error\n");
if (mcsr & PPC47x_MCSR_FPR)
printk(KERN_ERR "FPR Parity Error\n");
if (mcsr & PPC47x_MCSR_IPR)
printk(KERN_ERR "Machine Check exception is imprecise\n");
/* Clear MCSR */
mtspr(SPRN_MCSR, mcsr);
return 0;
}
#elif defined(CONFIG_E500)
int machine_check_e500(struct pt_regs *regs)
{
......
arch/powerpc/kernel/vio.c
View file @ 79c45812
......@@ -645,8 +645,10 @@ void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
found = 1;
break;
}
if (!found)
if (!found) {
spin_unlock_irqrestore(&vio_cmo.lock, flags);
return;
}
/* Increase/decrease in desired device entitlement */
if (desired >= viodev->cmo.desired) {
......@@ -958,9 +960,12 @@ viodev_cmo_rd_attr(allocated);
static ssize_t name_show(struct device *, struct device_attribute *, char *);
static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf);
static struct device_attribute vio_cmo_dev_attrs[] = {
__ATTR_RO(name),
__ATTR_RO(devspec),
__ATTR_RO(modalias),
__ATTR(cmo_desired, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
viodev_cmo_desired_show, viodev_cmo_desired_set),
__ATTR(cmo_entitled, S_IRUGO, viodev_cmo_entitled_show, NULL),
......@@ -1320,9 +1325,27 @@ static ssize_t devspec_show(struct device *dev,
return sprintf(buf, "%s\n", of_node ? of_node->full_name : "none");
}
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
const struct vio_dev *vio_dev = to_vio_dev(dev);
struct device_node *dn;
const char *cp;
dn = dev->archdata.of_node;
if (!dn)
return -ENODEV;
cp = of_get_property(dn, "compatible", NULL);
if (!cp)
return -ENODEV;
return sprintf(buf, "vio:T%sS%s\n", vio_dev->type, cp);
}
static struct device_attribute vio_dev_attrs[] = {
__ATTR_RO(name),
__ATTR_RO(devspec),
__ATTR_RO(modalias),
__ATTR_NULL
};
......@@ -1365,6 +1388,7 @@ static struct bus_type vio_bus_type = {
.match = vio_bus_match,
.probe = vio_bus_probe,
.remove = vio_bus_remove,
.pm = GENERIC_SUBSYS_PM_OPS,
};
/**
......
arch/powerpc/lib/string.S
View file @ 79c45812
......@@ -28,7 +28,7 @@ _GLOBAL(strcpy)
/* This clears out any unused part of the destination buffer,
just as the libc version does. -- paulus */
_GLOBAL(strncpy)
cmpwi 0,r5,0
PPC_LCMPI 0,r5,0
beqlr
mtctr r5
addi r6,r3,-1
......@@ -39,7 +39,7 @@ _GLOBAL(strncpy)
bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */
bnelr /* if we didn't hit a null char, we're done */
mfctr r5
cmpwi 0,r5,0 /* any space left in destination buffer? */
PPC_LCMPI 0,r5,0 /* any space left in destination buffer? */
beqlr /* we know r0 == 0 here */
2: stbu r0,1(r6) /* clear it out if so */
bdnz 2b
......@@ -70,8 +70,8 @@ _GLOBAL(strcmp)
blr
_GLOBAL(strncmp)
PPC_LCMPI r5,0
beqlr
PPC_LCMPI 0,r5,0
beq- 2f
mtctr r5
addi r5,r3,-1
addi r4,r4,-1
......@@ -82,6 +82,8 @@ _GLOBAL(strncmp)
beqlr 1
bdnzt eq,1b
blr
2: li r3,0
blr
_GLOBAL(strlen)
addi r4,r3,-1
......@@ -92,8 +94,8 @@ _GLOBAL(strlen)
blr
_GLOBAL(memcmp)
cmpwi 0,r5,0
ble- 2f
PPC_LCMPI 0,r5,0
beq- 2f
mtctr r5
addi r6,r3,-1
addi r4,r4,-1
......@@ -106,8 +108,8 @@ _GLOBAL(memcmp)
blr
_GLOBAL(memchr)
cmpwi 0,r5,0
ble- 2f
PPC_LCMPI 0,r5,0
beq- 2f
mtctr r5
addi r3,r3,-1
1: lbzu r0,1(r3)
......
arch/powerpc/mm/44x_mmu.c
View file @ 79c45812
......@@ -38,7 +38,9 @@ unsigned int tlb_44x_index; /* = 0 */
unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
int icache_44x_need_flush;
static void __init ppc44x_update_tlb_hwater(void)
unsigned long tlb_47x_boltmap[1024/8];
static void __cpuinit ppc44x_update_tlb_hwater(void)
{
extern unsigned int tlb_44x_patch_hwater_D[];
extern unsigned int tlb_44x_patch_hwater_I[];
......@@ -59,7 +61,7 @@ static void __init ppc44x_update_tlb_hwater(void)
}
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 44x type MMU
*/
static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
{
......@@ -67,12 +69,18 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
ppc44x_update_tlb_hwater();
mtspr(SPRN_MMUCR, 0);
__asm__ __volatile__(
"tlbwe %2,%3,%4\n"
"tlbwe %1,%3,%5\n"
"tlbwe %0,%3,%6\n"
:
#ifdef CONFIG_PPC47x
: "r" (PPC47x_TLB2_S_RWX),
#else
: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
#endif
"r" (phys),
"r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
"r" (entry),
......@@ -81,8 +89,93 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
"i" (PPC44x_TLB_ATTRIB));
}
static int __init ppc47x_find_free_bolted(void)
{
unsigned int mmube0 = mfspr(SPRN_MMUBE0);
unsigned int mmube1 = mfspr(SPRN_MMUBE1);
if (!(mmube0 & MMUBE0_VBE0))
return 0;
if (!(mmube0 & MMUBE0_VBE1))
return 1;
if (!(mmube0 & MMUBE0_VBE2))
return 2;
if (!(mmube1 & MMUBE1_VBE3))
return 3;
if (!(mmube1 & MMUBE1_VBE4))
return 4;
if (!(mmube1 & MMUBE1_VBE5))
return 5;
return -1;
}
static void __init ppc47x_update_boltmap(void)
{
unsigned int mmube0 = mfspr(SPRN_MMUBE0);
unsigned int mmube1 = mfspr(SPRN_MMUBE1);
if (mmube0 & MMUBE0_VBE0)
__set_bit((mmube0 >> MMUBE0_IBE0_SHIFT) & 0xff,
tlb_47x_boltmap);
if (mmube0 & MMUBE0_VBE1)
__set_bit((mmube0 >> MMUBE0_IBE1_SHIFT) & 0xff,
tlb_47x_boltmap);
if (mmube0 & MMUBE0_VBE2)
__set_bit((mmube0 >> MMUBE0_IBE2_SHIFT) & 0xff,
tlb_47x_boltmap);
if (mmube1 & MMUBE1_VBE3)
__set_bit((mmube1 >> MMUBE1_IBE3_SHIFT) & 0xff,
tlb_47x_boltmap);
if (mmube1 & MMUBE1_VBE4)
__set_bit((mmube1 >> MMUBE1_IBE4_SHIFT) & 0xff,
tlb_47x_boltmap);
if (mmube1 & MMUBE1_VBE5)
__set_bit((mmube1 >> MMUBE1_IBE5_SHIFT) & 0xff,
tlb_47x_boltmap);
}
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 47x type MMU
*/
static void __cpuinit ppc47x_pin_tlb(unsigned int virt, unsigned int phys)
{
unsigned int rA;
int bolted;
/* Base rA is HW way select, way 0, bolted bit set */
rA = 0x88000000;
/* Look for a bolted entry slot */
bolted = ppc47x_find_free_bolted();
BUG_ON(bolted < 0);
/* Insert bolted slot number */
rA |= bolted << 24;
pr_debug("256M TLB entry for 0x%08x->0x%08x in bolt slot %d\n",
virt, phys, bolted);
mtspr(SPRN_MMUCR, 0);
__asm__ __volatile__(
"tlbwe %2,%3,0\n"
"tlbwe %1,%3,1\n"
"tlbwe %0,%3,2\n"
:
: "r" (PPC47x_TLB2_SW | PPC47x_TLB2_SR |
PPC47x_TLB2_SX
#ifdef CONFIG_SMP
| PPC47x_TLB2_M
#endif
),
"r" (phys),
"r" (virt | PPC47x_TLB0_VALID | PPC47x_TLB0_256M),
"r" (rA));
}
void __init MMU_init_hw(void)
{
/* This is not useful on 47x but won't hurt either */
ppc44x_update_tlb_hwater();
flush_instruction_cache();
......@@ -95,8 +188,51 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S */
for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
addr += PPC_PIN_SIZE)
addr += PPC_PIN_SIZE) {
if (mmu_has_feature(MMU_FTR_TYPE_47x))
ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
else
ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
}
if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
ppc47x_update_boltmap();
#ifdef DEBUG
{
int i;
printk(KERN_DEBUG "bolted entries: ");
for (i = 0; i < 255; i++) {
if (test_bit(i, tlb_47x_boltmap))
printk("%d ", i);
}
printk("\n");
}
#endif /* DEBUG */
}
return total_lowmem;
}
#ifdef CONFIG_SMP
void __cpuinit mmu_init_secondary(int cpu)
{
unsigned long addr;
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S
*
* WARNING: This is called with only the first 256M of the
* linear mapping in the TLB and we can't take faults yet
* so beware of what this code uses. It runs off a temporary
* stack. current (r2) isn't initialized, smp_processor_id()
* will not work, current thread info isn't accessible, ...
*/
for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
addr += PPC_PIN_SIZE) {
if (mmu_has_feature(MMU_FTR_TYPE_47x))
ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
else
ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
}
}
#endif /* CONFIG_SMP */
arch/powerpc/mm/fault.c
View file @ 79c45812
......@@ -151,13 +151,14 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
if (!user_mode(regs) && (address >= TASK_SIZE))
return SIGSEGV;
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE) || \
defined(CONFIG_PPC_BOOK3S_64))
if (error_code & DSISR_DABRMATCH) {
/* DABR match */
do_dabr(regs, address, error_code);
return 0;
}
#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
#endif
if (in_atomic() || mm == NULL) {
if (!user_mode(regs))
......@@ -307,7 +308,6 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
survive:
ret = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
if (unlikely(ret & VM_FAULT_ERROR)) {
if (ret & VM_FAULT_OOM)
......@@ -359,15 +359,10 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
*/
out_of_memory:
up_read(&mm->mmap_sem);
if (is_global_init(current)) {
yield();
down_read(&mm->mmap_sem);
goto survive;
}
printk("VM: killing process %s\n", current->comm);
if (user_mode(regs))
do_group_exit(SIGKILL);
if (!user_mode(regs))
return SIGKILL;
pagefault_out_of_memory();
return 0;
do_sigbus:
up_read(&mm->mmap_sem);
......
arch/powerpc/mm/fsl_booke_mmu.c
View file @ 79c45812
......@@ -2,7 +2,7 @@
* Modifications by Kumar Gala (galak@kernel.crashing.org) to support
* E500 Book E processors.
*
* Copyright 2004 Freescale Semiconductor, Inc
* Copyright 2004,2010 Freescale Semiconductor, Inc.
*
* This file contains the routines for initializing the MMU
* on the 4xx series of chips.
......@@ -56,19 +56,13 @@
unsigned int tlbcam_index;
#define NUM_TLBCAMS (64)
#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
#endif
struct tlbcam {
u32 MAS0;
u32 MAS1;
unsigned long MAS2;
u32 MAS3;
u32 MAS7;
} TLBCAM[NUM_TLBCAMS];
#define NUM_TLBCAMS (64)
struct tlbcam TLBCAM[NUM_TLBCAMS];
struct tlbcamrange {
unsigned long start;
......@@ -109,19 +103,6 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
return 0;
}
void loadcam_entry(int idx)
{
mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
if (mmu_has_feature(MMU_FTR_BIG_PHYS))
mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
asm volatile("isync;tlbwe;isync" : : : "memory");
}
/*
* Set up one of the I/D BAT (block address translation) register pairs.
* The parameters are not checked; in particular size must be a power
......
arch/powerpc/mm/init_64.c
View file @ 79c45812
......@@ -252,6 +252,47 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
}
#endif /* CONFIG_PPC_BOOK3E */
struct vmemmap_backing *vmemmap_list;
static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node)
{
static struct vmemmap_backing *next;
static int num_left;
/* allocate a page when required and hand out chunks */
if (!next || !num_left) {
next = vmemmap_alloc_block(PAGE_SIZE, node);
if (unlikely(!next)) {
WARN_ON(1);
return NULL;
}
num_left = PAGE_SIZE / sizeof(struct vmemmap_backing);
}
num_left--;
return next++;
}
static __meminit void vmemmap_list_populate(unsigned long phys,
unsigned long start,
int node)
{
struct vmemmap_backing *vmem_back;
vmem_back = vmemmap_list_alloc(node);
if (unlikely(!vmem_back)) {
WARN_ON(1);
return;
}
vmem_back->phys = phys;
vmem_back->virt_addr = start;
vmem_back->list = vmemmap_list;
vmemmap_list = vmem_back;
}
int __meminit vmemmap_populate(struct page *start_page,
unsigned long nr_pages, int node)
{
......@@ -276,6 +317,8 @@ int __meminit vmemmap_populate(struct page *start_page,
if (!p)
return -ENOMEM;
vmemmap_list_populate(__pa(p), start, node);
pr_debug(" * %016lx..%016lx allocated at %p\n",
start, start + page_size, p);
......
arch/powerpc/mm/mmu_context_nohash.c
View file @ 79c45812
......@@ -395,10 +395,18 @@ void __init mmu_context_init(void)
* the PID/TID comparison is disabled, so we can use a TID of zero
* to represent all kernel pages as shared among all contexts.
* -- Dan
*
* The IBM 47x core supports 16-bit PIDs, thus 65535 contexts. We
* should normally never have to steal though the facility is
* present if needed.
* -- BenH
*/
if (mmu_has_feature(MMU_FTR_TYPE_8xx)) {
first_context = 0;
last_context = 15;
} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
first_context = 1;
last_context = 65535;
} else {
first_context = 1;
last_context = 255;
......
arch/powerpc/mm/mmu_decl.h
View file @ 79c45812
......@@ -69,12 +69,7 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
}
#endif /* CONIFG_8xx */
/*
* As of today, we don't support tlbivax broadcast on any
* implementation. When that becomes the case, this will be
* an extern.
*/
#ifdef CONFIG_PPC_BOOK3E
#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_PPC_47x)
extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
unsigned int tsize, unsigned int ind);
#else
......@@ -149,7 +144,15 @@ extern unsigned long mmu_mapin_ram(unsigned long top);
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
extern void adjust_total_lowmem(void);
extern void loadcam_entry(unsigned int index);
struct tlbcam {
u32 MAS0;
u32 MAS1;
unsigned long MAS2;
u32 MAS3;
u32 MAS7;
};
#elif defined(CONFIG_PPC32)
/* anything 32-bit except 4xx or 8xx */
extern void MMU_init_hw(void);
......
arch/powerpc/mm/numa.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/mm/pgtable_32.c
View file @ 79c45812
......@@ -146,6 +146,14 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
flags &= ~(_PAGE_USER | _PAGE_EXEC);
#ifdef _PAGE_BAP_SR
/* _PAGE_USER contains _PAGE_BAP_SR on BookE using the new PTE format
* which means that we just cleared supervisor access... oops ;-) This
* restores it
*/
flags |= _PAGE_BAP_SR;
#endif
return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
}
EXPORT_SYMBOL(ioremap_flags);
......@@ -385,11 +393,7 @@ static int __change_page_attr(struct page *page, pgprot_t prot)
return -EINVAL;
__set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0);
wmb();
#ifdef CONFIG_PPC_STD_MMU
flush_hash_pages(0, address, pmd_val(*kpmd), 1);
#else
flush_tlb_page(NULL, address);
#endif
pte_unmap(kpte);
return 0;
......
arch/powerpc/mm/pgtable_64.c
View file @ 79c45812
......@@ -265,6 +265,14 @@ void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
flags &= ~(_PAGE_USER | _PAGE_EXEC);
#ifdef _PAGE_BAP_SR
/* _PAGE_USER contains _PAGE_BAP_SR on BookE using the new PTE format
* which means that we just cleared supervisor access... oops ;-) This
* restores it
*/
flags |= _PAGE_BAP_SR;
#endif
if (ppc_md.ioremap)
return ppc_md.ioremap(addr, size, flags, caller);
return __ioremap_caller(addr, size, flags, caller);
......
arch/powerpc/mm/tlb_nohash_low.S
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/44x/Kconfig
View file @ 79c45812
config PPC_47x
bool "Support for 47x variant"
depends on 44x
default n
select MPIC
help
This option enables support for the 47x family of processors and is
not currently compatible with other 44x or 46x varients
config BAMBOO
bool "Bamboo"
depends on 44x
......@@ -151,6 +160,17 @@ config YOSEMITE
help
This option enables support for the AMCC PPC440EP evaluation board.
config ISS4xx
bool "ISS 4xx Simulator"
depends on (44x || 40x)
default n
select 405GP if 40x
select 440GP if 44x && !PPC_47x
select PPC_FPU
select OF_RTC
help
This option enables support for the IBM ISS simulation environment
#config LUAN
# bool "Luan"
# depends on 44x
......
arch/powerpc/platforms/44x/Makefile
View file @ 79c45812
......@@ -5,3 +5,4 @@ obj-$(CONFIG_SAM440EP) += sam440ep.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx) += iss4xx.o
arch/powerpc/platforms/44x/iss4xx.c 0 → 100644
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/83xx/mpc831x_rdb.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/83xx/mpc837x_rdb.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/86xx/mpc8610_hpcd.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/Kconfig.cputype
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/cell/cbe_cpufreq.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/iseries/exception.S
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/iseries/pci.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/iseries/smp.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pasemi/cpufreq.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/powermac/low_i2c.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/powermac/pmac.h
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/powermac/setup.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/powermac/smp.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/Makefile
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/dlpar.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/eeh.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/event_sources.c 0 → 100644
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/hvCall.S
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/lpar.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/pseries.h
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/ras.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/setup.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/smp.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/platforms/pseries/xics.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/sysdev/mpc8xxx_gpio.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/sysdev/mpic.c
View file @ 79c45812
This diff is collapsed.
arch/powerpc/sysdev/ppc4xx_soc.c
View file @ 79c45812
This diff is collapsed.
drivers/macintosh/macio-adb.c
View file @ 79c45812
This diff is collapsed.
drivers/macintosh/smu.c
View file @ 79c45812
This diff is collapsed.
drivers/macintosh/therm_adt746x.c
View file @ 79c45812
This diff is collapsed.
drivers/macintosh/windfarm_pm81.c
View file @ 79c45812
This diff is collapsed.
drivers/macintosh/windfarm_pm91.c
View file @ 79c45812
This diff is collapsed.
drivers/misc/Makefile
View file @ 79c45812
This diff is collapsed.
drivers/misc/hdpuftrs/Makefile deleted 100644 → 0
View file @ 59534f72
This diff is collapsed.
drivers/misc/hdpuftrs/hdpu_cpustate.c deleted 100644 → 0
View file @ 59534f72
This diff is collapsed.
drivers/misc/hdpuftrs/hdpu_nexus.c deleted 100644 → 0
View file @ 59534f72
This diff is collapsed.
drivers/serial/mpsc.c
View file @ 79c45812
This diff is collapsed.
include/linux/hdpu_features.h deleted 100644 → 0
View file @ 59534f72
This diff is collapsed.
sound/aoa/core/gpio-pmf.c
View file @ 79c45812
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7