Commit 7af2be6d authored by Anusha Srivatsa's avatar Anusha Srivatsa Committed by Rodrigo Vivi

drm/i915/icl: Add VIDEO_DIP registers

The Picture Parameter Set metadata for DSC has to be sent
to the panel through secondary data packets. Add the error
correction registers, data registers and control registers
for the same.

The control registers for  transcoders A and B are already
defined and will be reused for Icelake purpose. This patch adds
Control register for EDP and transcoder C apart from adding the
PPS data and error registers.

v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC.
The  _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: default avatarAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: default avatarManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-1-git-send-email-anusha.srivatsa@intel.com
parent 5fd9df6a
...@@ -4605,6 +4605,16 @@ enum { ...@@ -4605,6 +4605,16 @@ enum {
#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4) #define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4)
#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) #define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)
#define DRM_DIP_ENABLE (1 << 28)
#define PSR_VSC_BIT_7_SET (1 << 27)
#define VSC_SELECT_MASK (0x3 << 26)
#define VSC_SELECT_SHIFT 26
#define VSC_DIP_HW_HEA_DATA (0 << 26)
#define VSC_DIP_HW_HEA_SW_DATA (1 << 26)
#define VSC_DIP_HW_DATA_SW_HEA (2 << 26)
#define VSC_DIP_SW_HEA_DATA (3 << 26)
#define VDIP_ENABLE_PPS (1 << 24)
/* Panel power sequencing */ /* Panel power sequencing */
#define PPS_BASE 0x61200 #define PPS_BASE 0x61200
#define VLV_PPS_BASE (VLV_DISPLAY_BASE + PPS_BASE) #define VLV_PPS_BASE (VLV_DISPLAY_BASE + PPS_BASE)
...@@ -7843,12 +7853,25 @@ enum { ...@@ -7843,12 +7853,25 @@ enum {
#define _HSW_VIDEO_DIP_VSC_ECC_B 0x61344 #define _HSW_VIDEO_DIP_VSC_ECC_B 0x61344
#define _HSW_VIDEO_DIP_GCP_B 0x61210 #define _HSW_VIDEO_DIP_GCP_B 0x61210
/* Icelake PPS_DATA and _ECC DIP Registers.
* These are available for transcoders B,C and eDP.
* Adding the _A so as to reuse the _MMIO_TRANS2
* definition, with which it offsets to the right location.
*/
#define _ICL_VIDEO_DIP_PPS_DATA_A 0x60350
#define _ICL_VIDEO_DIP_PPS_DATA_B 0x61350
#define _ICL_VIDEO_DIP_PPS_ECC_A 0x603D4
#define _ICL_VIDEO_DIP_PPS_ECC_B 0x613D4
#define HSW_TVIDEO_DIP_CTL(trans) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_CTL_A) #define HSW_TVIDEO_DIP_CTL(trans) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_CTL_A)
#define HSW_TVIDEO_DIP_AVI_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_AVI_DATA_A + (i) * 4) #define HSW_TVIDEO_DIP_AVI_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_AVI_DATA_A + (i) * 4)
#define HSW_TVIDEO_DIP_VS_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VS_DATA_A + (i) * 4) #define HSW_TVIDEO_DIP_VS_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VS_DATA_A + (i) * 4)
#define HSW_TVIDEO_DIP_SPD_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_SPD_DATA_A + (i) * 4) #define HSW_TVIDEO_DIP_SPD_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_SPD_DATA_A + (i) * 4)
#define HSW_TVIDEO_DIP_GCP(trans) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_GCP_A) #define HSW_TVIDEO_DIP_GCP(trans) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_GCP_A)
#define HSW_TVIDEO_DIP_VSC_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VSC_DATA_A + (i) * 4) #define HSW_TVIDEO_DIP_VSC_DATA(trans, i) _MMIO_TRANS2(trans, _HSW_VIDEO_DIP_VSC_DATA_A + (i) * 4)
#define ICL_VIDEO_DIP_PPS_DATA(trans, i) _MMIO_TRANS2(trans, _ICL_VIDEO_DIP_PPS_DATA_A + (i) * 4)
#define ICL_VIDEO_DIP_PPS_ECC(trans, i) _MMIO_TRANS2(trans, _ICL_VIDEO_DIP_PPS_ECC_A + (i) * 4)
#define _HSW_STEREO_3D_CTL_A 0x70020 #define _HSW_STEREO_3D_CTL_A 0x70020
#define S3D_ENABLE (1 << 31) #define S3D_ENABLE (1 << 31)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment