Commit 7ca33c7a authored by Takashi Iwai's avatar Takashi Iwai

Merge tag 'asoc-v3.15-rc5-drivers' of...

Merge tag 'asoc-v3.15-rc5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Driver fixes for v3.15

A small set of driver fixes, nothing remarkable in itself or of any
relevance outside of the driver.
parents 927cdab3 f9a40596
......@@ -376,7 +376,7 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w,
reg = AIC31XX_ADCFLAG;
break;
default:
dev_err(w->codec->dev, "Unknown widget '%s' calling %s/n",
dev_err(w->codec->dev, "Unknown widget '%s' calling %s\n",
w->name, __func__);
return -EINVAL;
}
......
......@@ -154,6 +154,7 @@ static struct reg_default wm8962_reg[] = {
{ 40, 0x0000 }, /* R40 - SPKOUTL volume */
{ 41, 0x0000 }, /* R41 - SPKOUTR volume */
{ 49, 0x0010 }, /* R49 - Class D Control 1 */
{ 51, 0x0003 }, /* R51 - Class D Control 2 */
{ 56, 0x0506 }, /* R56 - Clocking 4 */
......@@ -795,7 +796,6 @@ static bool wm8962_volatile_register(struct device *dev, unsigned int reg)
case WM8962_ALC2:
case WM8962_THERMAL_SHUTDOWN_STATUS:
case WM8962_ADDITIONAL_CONTROL_4:
case WM8962_CLASS_D_CONTROL_1:
case WM8962_DC_SERVO_6:
case WM8962_INTERRUPT_STATUS_1:
case WM8962_INTERRUPT_STATUS_2:
......@@ -2929,13 +2929,22 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
static int wm8962_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
int val;
int val, ret;
if (mute)
val = WM8962_DAC_MUTE;
val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT;
else
val = 0;
/**
* The DAC mute bit is mirrored in two registers, update both to keep
* the register cache consistent.
*/
ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1,
WM8962_DAC_MUTE_ALT, val);
if (ret < 0)
return ret;
return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
WM8962_DAC_MUTE, val);
}
......
......@@ -1954,6 +1954,10 @@
#define WM8962_SPKOUTL_ENA_MASK 0x0040 /* SPKOUTL_ENA */
#define WM8962_SPKOUTL_ENA_SHIFT 6 /* SPKOUTL_ENA */
#define WM8962_SPKOUTL_ENA_WIDTH 1 /* SPKOUTL_ENA */
#define WM8962_DAC_MUTE_ALT 0x0010 /* DAC_MUTE */
#define WM8962_DAC_MUTE_ALT_MASK 0x0010 /* DAC_MUTE */
#define WM8962_DAC_MUTE_ALT_SHIFT 4 /* DAC_MUTE */
#define WM8962_DAC_MUTE_ALT_WIDTH 1 /* DAC_MUTE */
#define WM8962_SPKOUTL_PGA_MUTE 0x0002 /* SPKOUTL_PGA_MUTE */
#define WM8962_SPKOUTL_PGA_MUTE_MASK 0x0002 /* SPKOUTL_PGA_MUTE */
#define WM8962_SPKOUTL_PGA_MUTE_SHIFT 1 /* SPKOUTL_PGA_MUTE */
......
......@@ -258,10 +258,16 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
return -EINVAL;
}
if (ratio == 1) {
/* Only EXTAL source can be output directly without using PSR and PM */
if (ratio == 1 && clksrc == esai_priv->extalclk) {
/* Bypass all the dividers if not being needed */
ecr |= tx ? ESAI_ECR_ETO : ESAI_ECR_ERO;
goto out;
} else if (ratio < 2) {
/* The ratio should be no less than 2 if using other sources */
dev_err(dai->dev, "failed to derive required HCK%c rate\n",
tx ? 'T' : 'R');
return -EINVAL;
}
ret = fsl_esai_divisor_cal(dai, tx, ratio, false, 0);
......@@ -307,7 +313,8 @@ static int fsl_esai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
return -EINVAL;
}
if (esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) {
/* The ratio should be contented by FP alone if bypassing PM and PSR */
if (!esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) {
dev_err(dai->dev, "the ratio is out of range (1 ~ 16)\n");
return -EINVAL;
}
......@@ -454,12 +461,6 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
}
if (!dai->active) {
/* Reset Port C */
regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));
regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));
/* Set synchronous mode */
regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR,
ESAI_SAICR_SYNC, esai_priv->synchronous ?
......@@ -519,6 +520,11 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val);
/* Remove ESAI personal reset by configuring ESAI_PCRC and ESAI_PRRC */
regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));
regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));
return 0;
}
......
......@@ -145,7 +145,7 @@ static const struct file_operations audmux_debugfs_fops = {
.llseek = default_llseek,
};
static void __init audmux_debugfs_init(void)
static void audmux_debugfs_init(void)
{
int i;
char buf[20];
......
......@@ -197,13 +197,12 @@ static void rsnd_dma_complete(void *data)
* rsnd_dai_pointer_update() will be called twice,
* ant it will breaks io->byte_pos
*/
rsnd_dai_pointer_update(io, io->byte_per_period);
if (dma->submit_loop)
rsnd_dma_continue(dma);
rsnd_unlock(priv, flags);
rsnd_dai_pointer_update(io, io->byte_per_period);
}
static void __rsnd_dma_start(struct rsnd_dma *dma)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment