spi: Change FIFO flush operation and spi channel off

Setting SW_RST does TX/RX FIFO flush.
After FIFO flush, SW_RST should be cleared.
The above setting and clearing SW_RST operation should be done after spi channel off.
Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

drivers/spi/spi-s3c64xx.c

@@ -214,6 +214,10 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 
 	writel(0, regs + S3C64XX_SPI_PACKET_CNT);
 
+	val = readl(regs + S3C64XX_SPI_CH_CFG);
+	val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
+	writel(val, regs + S3C64XX_SPI_CH_CFG);
+
 	val = readl(regs + S3C64XX_SPI_CH_CFG);
 	val |= S3C64XX_SPI_CH_SW_RST;
 	val &= ~S3C64XX_SPI_CH_HS_EN;
@@ -248,10 +252,6 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 	val = readl(regs + S3C64XX_SPI_MODE_CFG);
 	val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
 	writel(val, regs + S3C64XX_SPI_MODE_CFG);
-
-	val = readl(regs + S3C64XX_SPI_CH_CFG);
-	val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
-	writel(val, regs + S3C64XX_SPI_CH_CFG);
 }
 
 static void s3c64xx_spi_dmacb(void *data)