Merge tag 'renesas-dt-for-v3.16' of...

Merge tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman:

r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs
* Add MSIOF nodes and aliases
* Correct I2C clock parents

r8a7791 (R-Car M2) SoC
* Add EHCI MSTP clock

r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards
* Add MSIOF nodes
* Add gpio-keys support for SW2
* Enable I2C
* Enable Quad SPI transfers for the SPI FLASH
* Rename and lable spi to qspi, add spi0 alias
* Set ethernet PHY LED mode

r8a7779 (R-Car H1) and r8a7778 (R-Car M2) SoCs
* Improve and correct HSPI nodes

r8a7778 (R-Car M2) based Bock-W board
* Add SPI FLASH

r8a7740 (R-Mobile A1) SoC
* Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings

r8a7740 (R-Mobile A1) based Armadillo800 EVA board
* Enable RTC
* Use KEY_* macros for gpio-keys

EMEV2 (Emma Mobile EV2) based kzm9g board
* Use KEY_* macros for gpio-keys

* tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
  ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii"
  ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH
  ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASH
  ARM: shmobile: r8a7790: add IIC(B) cores to dtsi
  ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi
  ARM: shmobile: r8a7790: add IIC0-2 clock macros
  ARM: shmobile: r8a7791: Fix the I2C clocks parents in DT
  ARM: shmobile: r8a7790: Fix the I2C clocks parents in DT
  ARM: shmobile: lager: Correct setting of ethernet PHY LED mode
  ARM: shmobile: armadillo-reference dts: enable RTC
  ARM: shmobile: r8a7791: Add EHCI MSTP clock
  ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings
  ARM: shmobile: koelsch: activate i2c6 bus
  ARM: shmobile: koelsch: make i2c2-pfc node unique
  ARM: shmobile: r8a7791: add IIC(B) cores to dtsi
  ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi
  ARM: shmobile: r8a7791: add IIC0/1 clock macros
  ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys
  ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keys
  ARM: shmobile: koelsch: Set ethernet PHY LED mode
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts

@@ -11,6 +11,7 @@
 /dts-v1/;
 #include "r8a7740.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
@@ -77,26 +78,26 @@ gpio-keys {
 
 		power-key {
 			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "SW3";
 			gpio-key,wakeup;
 		};
 
 		back-key {
 			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			label = "SW4";
 		};
 
 		menu-key {
 			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-			linux,code = <139>;
+			linux,code = <KEY_MENU>;
 			label = "SW5";
 		};
 
 		home-key {
 			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			label = "SW6";
 		};
 	};
@@ -117,6 +118,16 @@ led4 {
 		};
 	};
 
+	i2c2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
@@ -166,6 +177,14 @@ wm8978: wm8978@1a {
 	};
 };
 
+&i2c2 {
+	status = "okay";
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
 &pfc {
 	pinctrl-0 = <&scifa1_pins>;
 	pinctrl-names = "default";

arch/arm/boot/dts/r8a7740.dtsi

@@ -125,7 +125,7 @@ irqpin3: irqpin@e690000c {
 	i2c0: i2c@fff20000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xfff20000 0x425>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
@@ -138,7 +138,7 @@ i2c0: i2c@fff20000 {
 	i2c1: i2c@e6c20000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xe6c20000 0x425>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
@@ -173,7 +173,7 @@ tpu: pwm@e6600000 {
 	};
 
 	mmcif0: mmc@e6bd0000 {
-		compatible = "renesas,sh-mmcif";
+		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
@@ -219,7 +219,7 @@ sdhi2: sd@e6870000 {
 
 	sh_fsi2: sound@fe1f0000 {
 		#sound-dai-cells = <1>;
-		compatible = "renesas,sh_fsi2";
+		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
 		reg = <0xfe1f0000 0x400>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 9 0x4>;

arch/arm/boot/dts/r8a7778-bockw-reference.dts

@@ -109,4 +109,18 @@ &hspi0 {
 	pinctrl-0 = <&hspi0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl008k";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "data(spi)";
+			reg = <0x00000000 0x00100000>;
+		};
+	};
 };

arch/arm/boot/dts/r8a7778.dtsi

@@ -204,26 +204,32 @@ sdhi2: sd@ffe4f000 {
 	};
 
 	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/r8a7779.dtsi

@@ -256,26 +256,32 @@ sdhi3: sd@ffe4f000 {
 	};
 
 	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 
 	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi";
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupt-controller = <&gic>;
+		interrupt-parent = <&gic>;
 		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/r8a7790-lager.dts

@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "r8a7790.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Lager";
@@ -36,6 +37,39 @@ lbsc {
 		#size-cells = <1>;
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button@1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+		button@4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led6 {
@@ -155,10 +189,16 @@ mmc1_pins: mmc1 {
 		renesas,function = "mmc1";
 	};
 
-	qspi_pins: spi {
+	qspi_pins: spi0 {
 		renesas,groups = "qspi_ctrl", "qspi_data4";
 		renesas,function = "qspi";
 	};
+
+	msiof1_pins: spi2 {
+		renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
+				 "msiof1_tx";
+		renesas,function = "msiof1";
+	};
 };
 
 &ether {
@@ -173,6 +213,7 @@ phy1: ethernet-phy@1 {
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
 	};
 };
 
@@ -190,7 +231,7 @@ &sata1 {
 	status = "okay";
 };
 
-&spi {
+&qspi {
 	pinctrl-0 = <&qspi_pins>;
 	pinctrl-names = "default";
 
@@ -202,6 +243,8 @@ flash: flash@0 {
 		compatible = "spansion,s25fl512s";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 
 		partition@0 {
@@ -221,6 +264,22 @@ partition@440000 {
 	};
 };
 
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";

arch/arm/boot/dts/r8a7790.dtsi

@@ -24,6 +24,15 @@ aliases {
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
+		i2c4 = &iic0;
+		i2c5 = &iic1;
+		i2c6 = &iic2;
+		i2c7 = &iic3;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		spi4 = &msiof3;
 	};
 
 	cpus {
@@ -231,6 +240,46 @@ i2c3: i2c@e6540000 {
 		status = "disabled";
 	};
 
+	iic0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+		status = "disabled";
+	};
+
+	iic1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+		status = "disabled";
+	};
+
+	iic2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x425>;
+		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+		status = "disabled";
+	};
+
+	iic3: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+		status = "disabled";
+	};
+
 	mmcif0: mmcif@ee200000 {
 		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
@@ -697,18 +746,19 @@ R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
-				 <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
-				 <&mmc0_clk>, <&rclk_clk>;
+			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
+				 <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
+				 <&hp_clk>, <&hp_clk>, <&rclk_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
-				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
-				R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1
+				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
+				R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1
 			>;
 			clock-output-names =
-				"tpu0", "mmcif1", "sdhi3", "sdhi2",
-				"sdhi1", "sdhi0", "mmcif0", "cmt1";
+				"iic2", "tpu0", "mmcif1", "sdhi3",
+				"sdhi2", "sdhi1", "sdhi0", "mmcif0",
+				"iic0", "iic1", "cmt1";
 		};
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -752,20 +802,20 @@ R8A7790_CLK_SATA0
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>,
-				 <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+			clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD
-				R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1
-				R8A7790_CLK_I2C0
+				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
+				R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
 			>;
 			clock-output-names =
-				"rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0";
+				"rcan1", "rcan0", "qspi_mod", "iic3",
+				"i2c3", "i2c2", "i2c1", "i2c0";
 		};
 	};
 
-	spi: spi@e6b10000 {
+	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7790", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
@@ -775,4 +825,44 @@ spi: spi@e6b10000 {
 		#size-cells = <0>;
 		status = "disabled";
 	};
+
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e20000 0 0x0064>;
+		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e10000 0 0x0064>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e00000 0 0x0064>;
+		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof3: spi@e6c90000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6c90000 0 0x0064>;
+		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -13,6 +13,7 @@
 /dts-v1/;
 #include "r8a7791.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Koelsch";
@@ -40,51 +41,79 @@ lbsc {
 	gpio-keys {
 		compatible = "gpio-keys";
 
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
 		key-a {
 			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <30>;
+			linux,code = <KEY_A>;
 			label = "SW30";
 			gpio-key,wakeup;
 			debounce-interval = <20>;
 		};
 		key-b {
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <48>;
+			linux,code = <KEY_B>;
 			label = "SW31";
 			gpio-key,wakeup;
 			debounce-interval = <20>;
 		};
 		key-c {
 			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <46>;
+			linux,code = <KEY_C>;
 			label = "SW32";
 			gpio-key,wakeup;
 			debounce-interval = <20>;
 		};
 		key-d {
 			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <32>;
+			linux,code = <KEY_D>;
 			label = "SW33";
 			gpio-key,wakeup;
 			debounce-interval = <20>;
 		};
 		key-e {
 			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
+			linux,code = <KEY_E>;
 			label = "SW34";
 			gpio-key,wakeup;
 			debounce-interval = <20>;
 		};
 		key-f {
 			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <33>;
+			linux,code = <KEY_F>;
 			label = "SW35";
 			gpio-key,wakeup;
 			debounce-interval = <20>;
 		};
 		key-g {
 			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <34>;
+			linux,code = <KEY_G>;
 			label = "SW36";
 			gpio-key,wakeup;
 			debounce-interval = <20>;
@@ -195,11 +224,16 @@ eeprom@50 {
 	};
 };
 
+&i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
 &pfc {
 	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
 	pinctrl-names = "default";
 
-	i2c2_pins: i2c {
+	i2c2_pins: i2c2 {
 		renesas,groups = "i2c2";
 		renesas,function = "i2c2";
 	};
@@ -244,10 +278,16 @@ sdhi2_pins: sd2 {
 		renesas,function = "sdhi2";
 	};
 
-	qspi_pins: spi {
+	qspi_pins: spi0 {
 		renesas,groups = "qspi_ctrl", "qspi_data4";
 		renesas,function = "qspi";
 	};
+
+	msiof0_pins: spi1 {
+		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		renesas,function = "msiof0";
+	};
 };
 
 &ether {
@@ -262,6 +302,7 @@ phy1: ethernet-phy@1 {
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
 	};
 };
 
@@ -301,7 +342,7 @@ &sdhi2 {
 	status = "okay";
 };
 
-&spi {
+&qspi {
 	pinctrl-0 = <&qspi_pins>;
 	pinctrl-names = "default";
 
@@ -313,6 +354,8 @@ flash: flash@0 {
 		compatible = "spansion,s25fl512s";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 
 		partition@0 {
@@ -331,3 +374,18 @@ partition@100000 {
 		};
 	};
 };
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};

arch/arm/boot/dts/r8a7791.dtsi

@@ -27,6 +27,13 @@ aliases {
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
 	};
 
 	cpus {
@@ -37,14 +44,14 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
-			clock-frequency = <1300000000>;
+			clock-frequency = <1500000000>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			clock-frequency = <1300000000>;
+			clock-frequency = <1500000000>;
 		};
 	};
 
@@ -180,6 +187,7 @@ irqc0: interrupt-controller@e61c0000 {
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	/* The memory map in the User's Manual maps the cores to bus numbers */
 	i2c0: i2c@e6508000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -231,6 +239,7 @@ i2c4: i2c@e6520000 {
 	};
 
 	i2c5: i2c@e6528000 {
+		/* doesn't need pinmux */
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
@@ -240,6 +249,37 @@ i2c5: i2c@e6528000 {
 		status = "disabled";
 	};
 
+	i2c6: i2c@e60b0000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+		status = "disabled";
+	};
+
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7791";
 		reg = <0 0xe6060000 0 0x250>;
@@ -712,15 +752,16 @@ R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>,
-				<&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>;
+			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
+				 <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1
-				R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1
+				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
+				R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1
 			>;
 			clock-output-names =
-				"tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1";
+				"tpu0", "sdhi2", "sdhi1", "sdhi0",
+				"mmcif0", "i2c7", "i2c8", "cmt1";
 		};
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -733,19 +774,19 @@ mstp5_clks: mstp5_clks@e6150144 {
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+			clocks = <&mp_clk>,  <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
 				 <&zx_clk>, <&zx_clk>, <&zx_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
+				R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
 				R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
 				R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
 				R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
 				R8A7791_CLK_LVDS0
 			>;
 			clock-output-names =
-				"hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+				"ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
 				"scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
 		};
 		mstp8_clks: mstp8_clks@e6150990 {
@@ -764,17 +805,17 @@ R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>,
-				 <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				 <&p_clk>;
+			clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
+				 <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD
-				R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3
-				R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
+				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
+				R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
+				R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
 			>;
 			clock-output-names =
-				"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3",
+				"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3",
 				"i2c2", "i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks@e615099c {
@@ -789,7 +830,7 @@ R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
 		};
 	};
 
-	spi: spi@e6b10000 {
+	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
@@ -799,4 +840,34 @@ spi: spi@e6b10000 {
 		#size-cells = <0>;
 		status = "disabled";
 	};
+
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e20000 0 0x0064>;
+		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e10000 0 0x0064>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e00000 0 0x0064>;
+		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/sh73a0-kzm9g-reference.dts

@@ -14,6 +14,7 @@
 /dts-v1/;
 #include "sh73a0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -112,43 +113,43 @@ gpio-keys {
 
 		back-key {
 			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
-			linux,code = <158>;
+			linux,code = <KEY_BACK>;
 			label = "SW3";
 		};
 
 		right-key {
 			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
-			linux,code = <106>;
+			linux,code = <KEY_RIGHT>;
 			label = "SW2-R";
 		};
 
 		left-key {
 			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
-			linux,code = <105>;
+			linux,code = <KEY_LEFT>;
 			label = "SW2-L";
 		};
 
 		enter-key {
 			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
-			linux,code = <28>;
+			linux,code = <KEY_ENTER>;
 			label = "SW2-P";
 		};
 
 		up-key {
 			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
-			linux,code = <103>;
+			linux,code = <KEY_UP>;
 			label = "SW2-U";
 		};
 
 		down-key {
 			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
-			linux,code = <108>;
+			linux,code = <KEY_DOWN>;
 			label = "SW2-D";
 		};
 
 		home-key {
 			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
-			linux,code = <102>;
+			linux,code = <KEY_HOME>;
 			label = "SW1";
 		};
 	};

include/dt-bindings/clock/r8a7790-clock.h

@@ -50,6 +50,7 @@
 #define R8A7790_CLK_SYS_DMAC0		19
 
 /* MSTP3 */
+#define R8A7790_CLK_IIC2		0
 #define R8A7790_CLK_TPU0		4
 #define R8A7790_CLK_MMCIF1		5
 #define R8A7790_CLK_SDHI3		11
@@ -57,6 +58,8 @@
 #define R8A7790_CLK_SDHI1		13
 #define R8A7790_CLK_SDHI0		14
 #define R8A7790_CLK_MMCIF0		15
+#define R8A7790_CLK_IIC0		18
+#define R8A7790_CLK_IIC1		23
 #define R8A7790_CLK_SSUSB		28
 #define R8A7790_CLK_CMT1		29
 #define R8A7790_CLK_USBDMAC0		30

include/dt-bindings/clock/r8a7791-clock.h

@@ -51,6 +51,8 @@
 #define R8A7791_CLK_SDHI1		12
 #define R8A7791_CLK_SDHI0		14
 #define R8A7791_CLK_MMCIF0		15
+#define R8A7791_CLK_IIC0		18
+#define R8A7791_CLK_IIC1		23
 #define R8A7791_CLK_SSUSB		28
 #define R8A7791_CLK_CMT1		29
 #define R8A7791_CLK_USBDMAC0		30
@@ -61,6 +63,7 @@
 #define R8A7791_CLK_PWM			23
 
 /* MSTP7 */
+#define R8A7791_CLK_EHCI		3
 #define R8A7791_CLK_HSUSB		4
 #define R8A7791_CLK_HSCIF2		13
 #define R8A7791_CLK_SCIF5		14