Commit 7df9b485 authored by David S. Miller's avatar David S. Miller

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
Here is another batch of fixes intended for the 3.12 stream...

For the mac80211 bits, Johannes says:

"This time I have two fixes for IBSS (including one for wext, hah), a fix
for extended rates IEs, an active monitor checking fix and a sysfs
registration race fix."

On top of those...

Amitkumar Karwar brings an mwifiex fix for an interrupt loss issue
w/ SDIO devices.  The problem was due to a command timeout issue
introduced by an earlier patch.

Felix Fietkau a stall in the ath9k driver.  This patch fixes the
regression introduced in the commit "ath9k: use software queues for
un-aggregated data packets".

Stanislaw Gruszka reverts an rt2x00 patch that was found to cause
connection problems with some devices.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 1661bf36 1eea72f0
......@@ -1969,15 +1969,18 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
struct ath_atx_tid *tid, struct sk_buff *skb)
{
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_frame_info *fi = get_frame_info(skb);
struct list_head bf_head;
struct ath_buf *bf;
bf = fi->bf;
struct ath_buf *bf = fi->bf;
INIT_LIST_HEAD(&bf_head);
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
if (tid && (tx_info->flags & IEEE80211_TX_CTL_AMPDU)) {
bf->bf_state.bf_type = BUF_AMPDU;
ath_tx_addto_baw(sc, tid, bf);
}
bf->bf_next = NULL;
bf->bf_lastbf = bf;
......
......@@ -358,10 +358,12 @@ int mwifiex_main_process(struct mwifiex_adapter *adapter)
}
} while (true);
if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter))
spin_lock_irqsave(&adapter->main_proc_lock, flags);
if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) {
spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
goto process_start;
}
spin_lock_irqsave(&adapter->main_proc_lock, flags);
adapter->mwifiex_processing = false;
spin_unlock_irqrestore(&adapter->main_proc_lock, flags);
......
......@@ -105,13 +105,11 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
goto exit_release_regions;
}
pci_enable_msi(pci_dev);
hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
if (!hw) {
rt2x00_probe_err("Failed to allocate hardware\n");
retval = -ENOMEM;
goto exit_disable_msi;
goto exit_release_regions;
}
pci_set_drvdata(pci_dev, hw);
......@@ -152,9 +150,6 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops)
exit_free_device:
ieee80211_free_hw(hw);
exit_disable_msi:
pci_disable_msi(pci_dev);
exit_release_regions:
pci_release_regions(pci_dev);
......@@ -179,8 +174,6 @@ void rt2x00pci_remove(struct pci_dev *pci_dev)
rt2x00pci_free_reg(rt2x00dev);
ieee80211_free_hw(hw);
pci_disable_msi(pci_dev);
/*
* Free the PCI device data.
*/
......
......@@ -3056,6 +3056,9 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx,
case NL80211_IFTYPE_ADHOC:
if (!bssid)
return 0;
if (ether_addr_equal(sdata->vif.addr, hdr->addr2) ||
ether_addr_equal(sdata->u.ibss.bssid, hdr->addr2))
return 0;
if (ieee80211_is_beacon(hdr->frame_control)) {
return 1;
} else if (!ieee80211_bssid_match(bssid, sdata->u.ibss.bssid)) {
......
......@@ -2103,7 +2103,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
int rate, skip, shift;
int rate, shift;
u8 i, exrates, *pos;
u32 basic_rates = sdata->vif.bss_conf.basic_rates;
u32 rate_flags;
......@@ -2131,14 +2131,11 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
pos = skb_put(skb, exrates + 2);
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos++ = exrates;
skip = 0;
for (i = 8; i < sband->n_bitrates; i++) {
u8 basic = 0;
if ((rate_flags & sband->bitrates[i].flags)
!= rate_flags)
continue;
if (skip++ < 8)
continue;
if (need_basic && basic_rates & BIT(i))
basic = 0x80;
rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
......
......@@ -566,18 +566,13 @@ int wiphy_register(struct wiphy *wiphy)
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
rtnl_lock();
res = device_add(&rdev->wiphy.dev);
if (res)
return res;
res = rfkill_register(rdev->rfkill);
if (res) {
device_del(&rdev->wiphy.dev);
rtnl_unlock();
return res;
}
rtnl_lock();
/* set up regulatory info */
wiphy_regulatory_register(wiphy);
......@@ -606,6 +601,15 @@ int wiphy_register(struct wiphy *wiphy)
rdev->wiphy.registered = true;
rtnl_unlock();
res = rfkill_register(rdev->rfkill);
if (res) {
rfkill_destroy(rdev->rfkill);
rdev->rfkill = NULL;
wiphy_unregister(&rdev->wiphy);
return res;
}
return 0;
}
EXPORT_SYMBOL(wiphy_register);
......@@ -640,6 +644,7 @@ void wiphy_unregister(struct wiphy *wiphy)
rtnl_unlock();
__count == 0; }));
if (rdev->rfkill)
rfkill_unregister(rdev->rfkill);
rtnl_lock();
......
......@@ -263,6 +263,8 @@ int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
wdev->wext.ibss.chandef.chan = chan;
wdev->wext.ibss.chandef.center_freq1 =
chan->center_freq;
break;
}
......@@ -347,6 +349,7 @@ int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
if (chan) {
wdev->wext.ibss.chandef.chan = chan;
wdev->wext.ibss.chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
wdev->wext.ibss.chandef.center_freq1 = freq;
wdev->wext.ibss.channel_fixed = true;
} else {
/* cfg80211_ibss_wext_join will pick one if needed */
......
......@@ -2421,7 +2421,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
change = true;
}
if (flags && (*flags & NL80211_MNTR_FLAG_ACTIVE) &&
if (flags && (*flags & MONITOR_FLAG_ACTIVE) &&
!(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR))
return -EOPNOTSUPP;
......@@ -2483,7 +2483,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL,
&flags);
if (!err && (flags & NL80211_MNTR_FLAG_ACTIVE) &&
if (!err && (flags & MONITOR_FLAG_ACTIVE) &&
!(rdev->wiphy.features & NL80211_FEATURE_ACTIVE_MONITOR))
return -EOPNOTSUPP;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment