Commit 7eeff74c authored by Johannes Berg's avatar Johannes Berg

mac80211: don't react to beacon loss if HW monitoring

If the HW is monitoring connection loss (as advertised
by IEEE80211_HW_CONNECTION_MONITOR) but not filtering
beacons (IEEE80211_VIF_BEACON_FILTER) then mac80211 will
still start the beacon loss timer and if a few beacons
are lost, e.g. due to scanning, drop the connection.

If the hardware doesn't advertise connection monitoring,
then it won't drop the connection right away but probe
the AP, which is intended, but due to the logic in the
timer when connection monitoring is done it assumes the
connection was actually lost.

Fix this problem by not starting the timer when the HW
does connection monitoring.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent d545daba
......@@ -146,6 +146,9 @@ void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
return;
if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
return;
mod_timer(&sdata->u.mgd.bcn_mon_timer,
round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment