ARM: davinci: unduplicate aemif support

All users now register platform devices using the ti-aemif driver.
Remove the handcrafted aemif API.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/mach-davinci/Makefile

@@ -6,7 +6,7 @@
 
 # Common objects
 obj-y 					:= time.o serial.o usb.o \
-					   common.o sram.o aemif.o
+					   common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 

arch/arm/mach-davinci/aemif.c

-/*
- * AEMIF support for DaVinci SoCs
- *
- * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/time.h>
-
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/mtd-davinci.h>
-
-/* Timing value configuration */
-
-#define TA(x)		((x) << 2)
-#define RHOLD(x)	((x) << 4)
-#define RSTROBE(x)	((x) << 7)
-#define RSETUP(x)	((x) << 13)
-#define WHOLD(x)	((x) << 17)
-#define WSTROBE(x)	((x) << 20)
-#define WSETUP(x)	((x) << 26)
-
-#define TA_MAX		0x3
-#define RHOLD_MAX	0x7
-#define RSTROBE_MAX	0x3f
-#define RSETUP_MAX	0xf
-#define WHOLD_MAX	0x7
-#define WSTROBE_MAX	0x3f
-#define WSETUP_MAX	0xf
-
-#define TIMING_MASK	(TA(TA_MAX) | \
-				RHOLD(RHOLD_MAX) | \
-				RSTROBE(RSTROBE_MAX) |	\
-				RSETUP(RSETUP_MAX) | \
-				WHOLD(WHOLD_MAX) | \
-				WSTROBE(WSTROBE_MAX) | \
-				WSETUP(WSETUP_MAX))
-
-static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static inline void davinci_aemif_writel(void __iomem *base,
-					int offset, unsigned long value)
-{
-	writel_relaxed(value, base + offset);
-}
-
-/*
- * aemif_calc_rate - calculate timing data.
- * @wanted: The cycle time needed in nanoseconds.
- * @clk: The input clock rate in kHz.
- * @max: The maximum divider value that can be programmed.
- *
- * On success, returns the calculated timing value minus 1 for easy
- * programming into AEMIF timing registers, else negative errno.
- */
-static int aemif_calc_rate(int wanted, unsigned long clk, int max)
-{
-	int result;
-
-	result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
-
-	pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted);
-
-	/* It is generally OK to have a more relaxed timing than requested... */
-	if (result < 0)
-		result = 0;
-
-	/* ... But configuring tighter timings is not an option. */
-	else if (result > max)
-		result = -EINVAL;
-
-	return result;
-}
-
-/**
- * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface
- * @t: timing values to be progammed
- * @base: The virtual base address of the AEMIF interface
- * @cs: chip-select to program the timing values for
- * @clkrate: the AEMIF clkrate
- *
- * This function programs the given timing values (in real clock) into the
- * AEMIF registers taking the AEMIF clock into account.
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs,
-					unsigned long clkrate)
-{
-	unsigned set, val;
-	int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
-	unsigned offset = A1CR_OFFSET + cs * 4;
-
-	if (!t)
-		return 0;	/* Nothing to do */
-
-	clkrate /= 1000;	/* turn clock into kHz for ease of use */
-
-	ta	= aemif_calc_rate(t->ta, clkrate, TA_MAX);
-	rhold	= aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX);
-	rstrobe	= aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX);
-	rsetup	= aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX);
-	whold	= aemif_calc_rate(t->whold, clkrate, WHOLD_MAX);
-	wstrobe	= aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX);
-	wsetup	= aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX);
-
-	if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
-			whold < 0 || wstrobe < 0 || wsetup < 0) {
-		pr_err("%s: cannot get suitable timings\n", __func__);
-		return -EINVAL;
-	}
-
-	set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
-		WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
-
-	val = __raw_readl(base + offset);
-	val &= ~TIMING_MASK;
-	val |= set;
-	__raw_writel(val, base + offset);
-
-	return 0;
-}
-
-/**
- * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata
- * @pdev - link to platform device to setup settings for
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-int davinci_aemif_setup(struct platform_device *pdev)
-{
-	struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev);
-	uint32_t val;
-	unsigned long clkrate;
-	struct resource	*res;
-	void __iomem *base;
-	struct clk *clk;
-	int ret = 0;
-
-	clk = clk_get(&pdev->dev, "aemif");
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(clk);
-	if (ret < 0) {
-		dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
-			ret);
-		goto err_put;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	base = ioremap(res->start, resource_size(res));
-	if (!base) {
-		dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res);
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	/*
-	 * Setup Async configuration register in case we did not boot
-	 * from NAND and so bootloader did not bother to set it up.
-	 */
-	val = davinci_aemif_readl(base, A1CR_OFFSET + pdata->core_chipsel * 4);
-	/*
-	 * Extended Wait is not valid and Select Strobe mode is not
-	 * used
-	 */
-	val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
-	if (pdata->options & NAND_BUSWIDTH_16)
-		val |= 0x1;
-
-	davinci_aemif_writel(base, A1CR_OFFSET + pdata->core_chipsel * 4, val);
-
-	clkrate = clk_get_rate(clk);
-
-	if (pdata->timing)
-		ret = davinci_aemif_setup_timing(pdata->timing, base,
-						 pdata->core_chipsel, clkrate);
-
-	if (ret < 0)
-		dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
-
-	iounmap(base);
-err:
-	clk_disable_unprepare(clk);
-err_put:
-	clk_put(clk);
-	return ret;
-}

include/linux/platform_data/mtd-davinci-aemif.h

@@ -33,5 +33,4 @@ struct davinci_aemif_timing {
 	u8	ta;
 };
 
-int davinci_aemif_setup(struct platform_device *pdev);
 #endif