Merge master.kernel.org:/home/rmk/linux-2.6-serial

drivers/serial/8250.c

@@ -999,7 +999,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	serial_outp(up, UART_MCR, save_mcr);
 	serial8250_clear_fifos(up);
 	(void)serial_in(up, UART_RX);
-	serial_outp(up, UART_IER, 0);
+	if (up->capabilities & UART_CAP_UUE)
+		serial_outp(up, UART_IER, UART_IER_UUE);
+	else
+		serial_outp(up, UART_IER, 0);
 
  out:	
 	spin_unlock_irqrestore(&up->port.lock, flags);

drivers/serial/8250_pnp.c

@@ -323,6 +323,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"USR9180",		0	},
 	/* U.S. Robotics 56K Voice INT PnP*/
 	{	"USR9190",		0	},
+	/* HP Compaq Tablet PC tc1100 Wacom tablet */
+	{	"WACF005",		0	},
 	/* Rockwell's (PORALiNK) 33600 INT PNP */
 	{	"WCI0003",		0	},
 	/* Unkown PnP modems */

drivers/serial/dz.c

 /*
- * dz.c: Serial port driver for DECStations equiped 
+ * dz.c: Serial port driver for DECStations equiped
  *       with the DZ chipset.
  *
- * Copyright (C) 1998 Olivier A. D. Lebaillif 
- *             
+ * Copyright (C) 1998 Olivier A. D. Lebaillif
+ *
  * Email: olivier.lebaillif@ifrsys.com
  *
  * [31-AUG-98] triemer
@@ -11,14 +11,14 @@
  * removed base_addr code - moving address assignment to setup.c
  * Changed name of dz_init to rs_init to be consistent with tc code
  * [13-NOV-98] triemer fixed code to receive characters
- *    after patches by harald to irq code.  
+ *    after patches by harald to irq code.
  * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
  *            field from "current" - somewhere between 2.1.121 and 2.1.131
  Qua Jun 27 15:02:26 BRT 2001
  * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
- *  
- * Parts (C) 1999 David Airlie, airlied@linux.ie 
- * [07-SEP-99] Bugfixes 
+ *
+ * Parts (C) 1999 David Airlie, airlied@linux.ie
+ * [07-SEP-99] Bugfixes
  *
  * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk>
  * Converted to new serial core
@@ -64,7 +64,7 @@ static struct dz_port dz_ports[DZ_NB_PORT];
 
 #ifdef DEBUG_DZ
 /*
- * debugging code to send out chars via prom 
+ * debugging code to send out chars via prom
  */
 static void debug_console(const char *s, int count)
 {
@@ -82,7 +82,7 @@ static void debug_console(const char *s, int count)
  * ------------------------------------------------------------
  * dz_in () and dz_out ()
  *
- * These routines are used to access the registers of the DZ 
+ * These routines are used to access the registers of the DZ
  * chip, hiding relocation differences between implementation.
  * ------------------------------------------------------------
  */
@@ -106,8 +106,8 @@ static inline void dz_out(struct dz_port *dport, unsigned offset,
  * ------------------------------------------------------------
  * rs_stop () and rs_start ()
  *
- * These routines are called before setting or resetting 
- * tty->stopped. They enable or disable transmitter interrupts, 
+ * These routines are called before setting or resetting
+ * tty->stopped. They enable or disable transmitter interrupts,
  * as necessary.
  * ------------------------------------------------------------
  */
@@ -156,17 +156,17 @@ static void dz_enable_ms(struct uart_port *port)
 
 /*
  * ------------------------------------------------------------
- * Here starts the interrupt handling routines.  All of the 
- * following subroutines are declared as inline and are folded 
- * into dz_interrupt.  They were separated out for readability's 
- * sake. 
+ * Here starts the interrupt handling routines.  All of the
+ * following subroutines are declared as inline and are folded
+ * into dz_interrupt.  They were separated out for readability's
+ * sake.
  *
  * Note: rs_interrupt() is a "fast" interrupt, which means that it
  * runs with interrupts turned off.  People who may want to modify
  * rs_interrupt() should try to keep the interrupt handler as fast as
  * possible.  After you are done making modifications, it is not a bad
  * idea to do:
- * 
+ *
  *	make drivers/serial/dz.s
  *
  * and look at the resulting assemble code in dz.s.
@@ -403,7 +403,7 @@ static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl)
  * startup ()
  *
  * various initialization tasks
- * ------------------------------------------------------------------- 
+ * -------------------------------------------------------------------
  */
 static int dz_startup(struct uart_port *uport)
 {
@@ -430,13 +430,13 @@ static int dz_startup(struct uart_port *uport)
 	return 0;
 }
 
-/* 
+/*
  * -------------------------------------------------------------------
  * shutdown ()
  *
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
- * ------------------------------------------------------------------- 
+ * -------------------------------------------------------------------
  */
 static void dz_shutdown(struct uart_port *uport)
 {
@@ -451,7 +451,7 @@ static void dz_shutdown(struct uart_port *uport)
  *          release the bus after transmitting. This must be done when
  *          the transmit shift register is empty, not be done when the
  *          transmit holding register is empty.  This functionality
- *          allows an RS485 driver to be written in user space. 
+ *          allows an RS485 driver to be written in user space.
  */
 static unsigned int dz_tx_empty(struct uart_port *uport)
 {
@@ -645,9 +645,9 @@ static void __init dz_init_ports(void)
 
 	if (mips_machtype == MACH_DS23100 ||
 	    mips_machtype == MACH_DS5100)
-		base = (unsigned long) KN01_DZ11_BASE;
+		base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_DZ11);
 	else
-		base = (unsigned long) KN02_DZ11_BASE;
+		base = CKSEG1ADDR(KN02_SLOT_BASE + KN02_DZ11);
 
 	for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
 		spin_lock_init(&dport->port.lock);
@@ -695,13 +695,13 @@ static void dz_console_put_char(struct dz_port *dport, unsigned char ch)
 
 	spin_unlock_irqrestore(&dport->port.lock, flags);
 }
-/* 
+/*
  * -------------------------------------------------------------------
  * dz_console_print ()
  *
  * dz_console_print is registered for printk.
  * The console must be locked when we get here.
- * ------------------------------------------------------------------- 
+ * -------------------------------------------------------------------
  */
 static void dz_console_print(struct console *cons,
 			     const char *str,

drivers/serial/mpc52xx_uart.c

@@ -725,7 +725,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
 	int i, idx, ret;
 
 	/* Check validity & presence */
-	idx = pdev->id;
+	idx = dev->id;
 	if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
 		return -EINVAL;
 
@@ -748,7 +748,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
 	port->ops	= &mpc52xx_uart_ops;
 
 	/* Search for IRQ and mapbase */
-	for (i=0 ; i<pdev->num_resources ; i++, res++) {
+	for (i=0 ; i<dev->num_resources ; i++, res++) {
 		if (res->flags & IORESOURCE_MEM)
 			port->mapbase = res->start;
 		else if (res->flags & IORESOURCE_IRQ)

drivers/serial/sa1100.c

@@ -156,7 +156,7 @@ static void sa1100_stop_tx(struct uart_port *port)
 }
 
 /*
- * interrupts may not be disabled on entry
+ * port locked and interrupts disabled
  */
 static void sa1100_start_tx(struct uart_port *port)
 {
@@ -164,11 +164,9 @@ static void sa1100_start_tx(struct uart_port *port)
 	unsigned long flags;
 	u32 utcr3;
 
-	spin_lock_irqsave(&sport->port.lock, flags);
 	utcr3 = UART_GET_UTCR3(sport);
 	sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS);
 	UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 /*

drivers/serial/serial_core.c

@@ -209,33 +209,45 @@ static void uart_shutdown(struct uart_state *state)
 	struct uart_info *info = state->info;
 	struct uart_port *port = state->port;
 
-	if (!(info->flags & UIF_INITIALIZED))
-		return;
-
 	/*
-	 * Turn off DTR and RTS early.
+	 * Set the TTY IO error marker
 	 */
-	if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
-		uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
 
-	/*
-	 * clear delta_msr_wait queue to avoid mem leaks: we may free
-	 * the irq here so the queue might never be woken up.  Note
-	 * that we won't end up waiting on delta_msr_wait again since
-	 * any outstanding file descriptors should be pointing at
-	 * hung_up_tty_fops now.
-	 */
-	wake_up_interruptible(&info->delta_msr_wait);
+	if (info->flags & UIF_INITIALIZED) {
+		info->flags &= ~UIF_INITIALIZED;
 
-	/*
-	 * Free the IRQ and disable the port.
-	 */
-	port->ops->shutdown(port);
+		/*
+		 * Turn off DTR and RTS early.
+		 */
+		if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+
+		/*
+		 * clear delta_msr_wait queue to avoid mem leaks: we may free
+		 * the irq here so the queue might never be woken up.  Note
+		 * that we won't end up waiting on delta_msr_wait again since
+		 * any outstanding file descriptors should be pointing at
+		 * hung_up_tty_fops now.
+		 */
+		wake_up_interruptible(&info->delta_msr_wait);
+
+		/*
+		 * Free the IRQ and disable the port.
+		 */
+		port->ops->shutdown(port);
+
+		/*
+		 * Ensure that the IRQ handler isn't running on another CPU.
+		 */
+		synchronize_irq(port->irq);
+	}
 
 	/*
-	 * Ensure that the IRQ handler isn't running on another CPU.
+	 * kill off our tasklet
 	 */
-	synchronize_irq(port->irq);
+	tasklet_kill(&info->tlet);
 
 	/*
 	 * Free the transmit buffer page.
@@ -244,15 +256,6 @@ static void uart_shutdown(struct uart_state *state)
 		free_page((unsigned long)info->xmit.buf);
 		info->xmit.buf = NULL;
 	}
-
-	/*
-	 * kill off our tasklet
-	 */
-	tasklet_kill(&info->tlet);
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
-
-	info->flags &= ~UIF_INITIALIZED;
 }
 
 /**
@@ -1928,14 +1931,25 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 
 	if (state->info && state->info->flags & UIF_INITIALIZED) {
 		struct uart_ops *ops = port->ops;
+		int ret;
 
 		ops->set_mctrl(port, 0);
-		ops->startup(port);
-		uart_change_speed(state, NULL);
-		spin_lock_irq(&port->lock);
-		ops->set_mctrl(port, port->mctrl);
-		ops->start_tx(port);
-		spin_unlock_irq(&port->lock);
+		ret = ops->startup(port);
+		if (ret == 0) {
+			uart_change_speed(state, NULL);
+			spin_lock_irq(&port->lock);
+			ops->set_mctrl(port, port->mctrl);
+			ops->start_tx(port);
+			spin_unlock_irq(&port->lock);
+		} else {
+			/*
+			 * Failed to resume - maybe hardware went away?
+			 * Clear the "initialized" flag so we won't try
+			 * to call the low level drivers shutdown method.
+			 */
+			state->info->flags &= ~UIF_INITIALIZED;
+			uart_shutdown(state);
+		}
 	}
 
 	up(&state->sem);