ARM: dts: Add board dts file for ODROID-X

Add initial DT for Hardkernel's ODROID-X board based on EXYNOS4412
SoC. This patch including adds the node to support fixed voltage for
peripherals like LED, ethernet controller, and this patch adds GPIO
connected LEDS on ODROID-X board and configure its properties like
following:
LED1: use 'heartbeat' trigger, blinking while the board is running.
LED2: use 'mmc0' trigger, on when mmc0 is accessing.

And adds the device node to support eMMC storage on SDCARD4 ports,
controlled by MSHC.
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
[kgene.kim@samsung.com: squashed into one commit as per Olof's comment]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/boot/dts/Makefile

@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
+	exynos4412-odroidx.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-origen.dtb \
 	exynos5250-smdk5250.dtb \

arch/arm/boot/dts/exynos4412-odroidx.dts

+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 1>;
+			default-state = "on";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	mshc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 1>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+};