IB/mlx4: Don't set VLAN in IBoE WQEs' control segment

There's no need to set the vlan-related fields in an IBoE send WQE
control segment:

 - the vlan to be used by a UD QP is set in the datagram segment.
 - for GSI (CM) QP, all the headers down to 8021q and MAC are built by
   the software anyway.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

drivers/infiniband/hw/mlx4/qp.c

@@ -1547,14 +1547,13 @@ static void set_masked_atomic_seg(struct mlx4_wqe_masked_atomic_seg *aseg,
 }
 
 static void set_datagram_seg(struct mlx4_wqe_datagram_seg *dseg,
-			     struct ib_send_wr *wr, __be16 *vlan)
+			     struct ib_send_wr *wr)
 {
 	memcpy(dseg->av, &to_mah(wr->wr.ud.ah)->av, sizeof (struct mlx4_av));
 	dseg->dqpn = cpu_to_be32(wr->wr.ud.remote_qpn);
 	dseg->qkey = cpu_to_be32(wr->wr.ud.remote_qkey);
 	dseg->vlan = to_mah(wr->wr.ud.ah)->av.eth.vlan;
 	memcpy(dseg->mac, to_mah(wr->wr.ud.ah)->av.eth.mac, 6);
-	*vlan = dseg->vlan;
 }
 
 static void set_mlx_icrc_seg(void *dseg)
@@ -1657,7 +1656,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 	__be32 uninitialized_var(lso_hdr_sz);
 	__be32 blh;
 	int i;
-	__be16 vlan = cpu_to_be16(0xffff);
 
 	spin_lock_irqsave(&qp->sq.lock, flags);
 
@@ -1761,7 +1759,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 			break;
 
 		case IB_QPT_UD:
-			set_datagram_seg(wqe, wr, &vlan);
+			set_datagram_seg(wqe, wr);
 			wqe  += sizeof (struct mlx4_wqe_datagram_seg);
 			size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
 
@@ -1824,11 +1822,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
 				    MLX4_WQE_CTRL_FENCE : 0) | size;
 
-		if (be16_to_cpu(vlan) < 0x1000) {
-			ctrl->ins_vlan = 1 << 6;
-			ctrl->vlan_tag = vlan;
-		}
-
 		/*
 		 * Make sure descriptor is fully written before
 		 * setting ownership bit (because HW can start