Commit 81fbc5ef authored by Paul Walmsley's avatar Paul Walmsley

OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c

Split the wd_timer disable code out into its own file,
mach-omap2/wd_timer.c; it belongs in its own file rather than
cluttering up devices.c.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Cc: Charulatha Varadarajan <charu@ti.com>
parent 233cbe5b
......@@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
common.o gpio.o dma.o
common.o gpio.o dma.o wd_timer.o
omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o
hwmod-common = omap_hwmod.o \
......
......@@ -33,6 +33,7 @@
#include "mux.h"
#include "control.h"
#include "wd_timer.h"
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
......@@ -955,56 +956,9 @@ static inline void omap_init_vout(void) {}
/*-------------------------------------------------------------------------*/
/*
* Inorder to avoid any assumptions from bootloader regarding WDT
* settings, WDT module is reset during init. This enables the watchdog
* timer. Hence it is required to disable the watchdog after the WDT reset
* during init. Otherwise the system would reboot as per the default
* watchdog timer registers settings.
*/
#define OMAP_WDT_WPS (0x34)
#define OMAP_WDT_SPR (0x48)
static int omap2_disable_wdt(struct omap_hwmod *oh, void *unused)
{
void __iomem *base;
int ret;
if (!oh) {
pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
return -EINVAL;
}
base = omap_hwmod_get_mpu_rt_va(oh);
if (!base) {
pr_err("%s: Could not get the base address for %s\n",
oh->name, __func__);
return -EINVAL;
}
/* Enable the clocks before accessing the WDT registers */
ret = omap_hwmod_enable(oh);
if (ret) {
pr_err("%s: Could not enable clocks for %s\n",
oh->name, __func__);
return ret;
}
/* sequence required to disable watchdog */
__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
cpu_relax();
__raw_writel(0x5555, base + OMAP_WDT_SPR);
while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
cpu_relax();
ret = omap_hwmod_idle(oh);
if (ret)
pr_err("%s: Could not disable clocks for %s\n",
oh->name, __func__);
return ret;
return omap2_wd_timer_disable(oh);
}
static void __init omap_disable_wdt(void)
......@@ -1017,7 +971,8 @@ static void __init omap_disable_wdt(void)
static int __init omap2_init_devices(void)
{
/* please keep these calls, and their implementations above,
/*
* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_disable_wdt();
......
/*
* OMAP2+ MPU WD_TIMER-specific code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/err.h>
#include <plat/omap_hwmod.h>
/*
* In order to avoid any assumptions from bootloader regarding WDT
* settings, WDT module is reset during init. This enables the watchdog
* timer. Hence it is required to disable the watchdog after the WDT reset
* during init. Otherwise the system would reboot as per the default
* watchdog timer registers settings.
*/
#define OMAP_WDT_WPS 0x34
#define OMAP_WDT_SPR 0x48
int omap2_wd_timer_disable(struct omap_hwmod *oh)
{
void __iomem *base;
int ret;
if (!oh) {
pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
return -EINVAL;
}
base = omap_hwmod_get_mpu_rt_va(oh);
if (!base) {
pr_err("%s: Could not get the base address for %s\n",
oh->name, __func__);
return -EINVAL;
}
/* Enable the clocks before accessing the WDT registers */
ret = omap_hwmod_enable(oh);
if (ret) {
pr_err("%s: Could not enable clocks for %s\n",
oh->name, __func__);
return ret;
}
/* sequence required to disable watchdog */
__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
cpu_relax();
__raw_writel(0x5555, base + OMAP_WDT_SPR);
while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
cpu_relax();
ret = omap_hwmod_idle(oh);
if (ret)
pr_err("%s: Could not disable clocks for %s\n",
oh->name, __func__);
return ret;
}
/*
* OMAP2+ MPU WD_TIMER-specific function prototypes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
#define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
#include <plat/omap_hwmod.h>
extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment