Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "A couple of subsystems have their own subsystem maintainers but choose
  to have the code merged through the soc tree as upstream, as the code
  tends to be used across multiple SoCs or has SoC specific drivers
  itself:

   - memory controllers:

     Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
     and its drivers, starting out with a set of cleanup patches.

     A larger driver for the Tegra memory controller that was
     accidentally missed for v5.8 is now added.

   - reset controllers:

     Only minor updates to drivers/reset this time

   - firmware:

     The "turris mox" firmware driver gains support for signed firmware
     blobs The tegra firmware driver gets extended to export some debug
     information Various updates to i.MX firmware drivers, mostly
     cosmetic

   - ARM SCMI/SCPI:

     A new mechanism for platform notifications is added, among a number
     of minor changes.

   - optee:

     Probing of the TEE bus is rewritten to better support detection of
     devices that depend on the tee-supplicant user space. A new
     firmware based trusted platform module (fTPM) driver is added based
     on OP-TEE

   - SoC attributes:

     A new driver is added to provide a generic soc_device for
     identifying a machine through the SMCCC ARCH_SOC_ID firmware
     interface rather than by probing SoC family specific registers.

     The series also contains some cleanups to the common soc_device
     code.

  There are also a number of updates to SoC specific drivers, the main
  ones are:

   - Mediatek cmdq driver gains a few in-kernel interfaces

   - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
     support for additional SoC variants

   - The Qualcomm GENI core code gains interconnect path voting and
     performance level support, and integrating this into a number of
     device drivers.

   - A new driver for Samsung Exynos5800 voltage coupler for

   - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
     specific device drivers

   - Updates to the TI K3 Ring Accelerator driver"

* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
  soc: qcom: geni: Fix unused label warning
  soc: qcom: smd-rpm: Fix kerneldoc
  memory: jz4780_nemc: Only request IO memory the driver will use
  soc: qcom: pdr: Reorder the PD state indication ack
  MAINTAINERS: Add Git repository for memory controller drivers
  memory: brcmstb_dpfe: Fix language typo
  memory: samsung: exynos5422-dmc: Correct white space issues
  memory: samsung: exynos-srom: Correct alignment
  memory: pl172: Enclose macro argument usage in parenthesis
  memory: of: Correct kerneldoc
  memory: omap-gpmc: Fix language typo
  memory: omap-gpmc: Correct white space issues
  memory: omap-gpmc: Use 'unsigned int' for consistency
  memory: omap-gpmc: Enclose macro argument usage in parenthesis
  memory: omap-gpmc: Correct kerneldoc
  memory: mvebu-devbus: Align with open parenthesis
  memory: mvebu-devbus: Add missing braces to all arms of if statement
  memory: bt1-l2-ctl: Add blank lines after declarations
  soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
  firmware: ti_sci: Replace HTTP links with HTTPS ones
  ...

Documentation/ABI/testing/debugfs-turris-mox-rwtm

+What:		/sys/kernel/debug/turris-mox-rwtm/do_sign
+Date:		Jun 2020
+KernelVersion:	5.8
+Contact:	Marek Behún <marek.behun@nic.cz>
+Description:	(W) Message to sign with the ECDSA private key stored in
+		    device's OTP. The message must be exactly 64 bytes (since
+		    this is intended for SHA-512 hashes).
+		(R) The resulting signature, 136 bytes. This contains the R and
+		    S values of the ECDSA signature, both in big-endian format.

Documentation/ABI/testing/sysfs-bus-optee-devices

+What:		/sys/bus/tee/devices/optee-ta-<uuid>/
+Date:           May 2020
+KernelVersion   5.8
+Contact:        op-tee@lists.trustedfirmware.org
+Description:
+		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
+		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
+		are free to create needed API under optee-ta-<uuid> directory.

Documentation/ABI/testing/sysfs-devices-soc

@@ -26,6 +26,30 @@ Description:
 		Read-only attribute common to all SoCs. Contains SoC family name
 		(e.g. DB8500).
 
+		On many of ARM based silicon with SMCCC v1.2+ compliant firmware
+		this will contain the JEDEC JEP106 manufacturer’s identification
+		code. The format is "jep106:XXYY" where XX is identity code and
+		YY is continuation code.
+
+		This manufacturer’s identification code is defined by one
+		or more eight (8) bit fields, each consisting of seven (7)
+		data bits plus one (1) odd parity bit. It is a single field,
+		limiting the possible number of vendors to 126. To expand
+		the maximum number of identification codes, a continuation
+		scheme has been defined.
+
+		The specified mechanism is that an identity code of 0x7F
+		represents the "continuation code" and implies the presence
+		of an additional identity code field, and this mechanism
+		may be extended to multiple continuation codes followed
+		by the manufacturer's identity code.
+
+		For example, ARM has identity code 0x7F 0x7F 0x7F 0x7F 0x3B,
+		which is code 0x3B on the fifth 'page'. This is shortened
+		as JEP106 identity code of 0x3B and a continuation code of
+		0x4 to represent the four continuation codes preceding the
+		identity code.
+
 What:		/sys/devices/socX/serial_number
 Date:		January 2019
 contact:	Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -40,6 +64,12 @@ Description:
 		Read-only attribute supported by most SoCs. In the case of
 		ST-Ericsson's chips this contains the SoC serial number.
 
+		On many of ARM based silicon with SMCCC v1.2+ compliant firmware
+		this will contain the SOC ID appended to the family attribute
+		to ensure there is no conflict in this namespace across various
+		vendors. The format is "jep106:XXYY:ZZZZ" where XX is identity
+		code, YY is continuation code and ZZZZ is the SOC ID.
+
 What:		/sys/devices/socX/revision
 Date:		January 2012
 contact:	Lee Jones <lee.jones@linaro.org>

Documentation/devicetree/bindings/firmware/qcom,scm.txt

@@ -11,10 +11,12 @@ Required properties:
  * "qcom,scm-apq8084"
  * "qcom,scm-ipq4019"
  * "qcom,scm-ipq806x"
+ * "qcom,scm-ipq8074"
  * "qcom,scm-msm8660"
  * "qcom,scm-msm8916"
  * "qcom,scm-msm8960"
  * "qcom,scm-msm8974"
+ * "qcom,scm-msm8994"
  * "qcom,scm-msm8996"
  * "qcom,scm-msm8998"
  * "qcom,scm-sc7180"

Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt

@@ -55,7 +55,7 @@ Required Properties:
 			corresponds to a range of host irqs.
 
 For more details on TISCI IRQ resource management refer:
-http://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
+https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
 
 Example:
 --------

Documentation/devicetree/bindings/reset/fsl,imx-src.txt

-Freescale i.MX System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "fsl,<chip>-src"
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
-  in this order.
-- #reset-cells: 1, see below
-
-example:
-
-src: src@20d8000 {
-        compatible = "fsl,imx6q-src";
-        reg = <0x020d8000 0x4000>;
-        interrupts = <0 91 0x04 0 96 0x04>;
-        #reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-The system reset controller can be used to reset the GPU, VPU,
-IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
-nodes should specify the reset line on the SRC in their resets
-property, containing a phandle to the SRC device node and a
-RESET_INDEX specifying which module to reset, as described in
-reset.txt
-
-example:
-
-        ipu1: ipu@2400000 {
-                resets = <&src 2>;
-        };
-        ipu2: ipu@2800000 {
-                resets = <&src 4>;
-        };
-
-The following RESET_INDEX values are valid for i.MX5:
-GPU_RESET     0
-VPU_RESET     1
-IPU1_RESET    2
-OPEN_VG_RESET 3
-The following additional RESET_INDEX value is valid for i.MX6:
-IPU2_RESET    4

Documentation/devicetree/bindings/reset/fsl,imx-src.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX System Reset Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The system reset controller can be used to reset the GPU, VPU,
+  IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+  nodes should specify the reset line on the SRC in their resets
+  property, containing a phandle to the SRC device node and a
+  RESET_INDEX specifying which module to reset, as described in
+  reset.txt
+
+  The following RESET_INDEX values are valid for i.MX5:
+    GPU_RESET     0
+    VPU_RESET     1
+    IPU1_RESET    2
+    OPEN_VG_RESET 3
+  The following additional RESET_INDEX value is valid for i.MX6:
+    IPU2_RESET    4
+
+properties:
+  compatible:
+    oneOf:
+      - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx50-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx53-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6q-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sx-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sl-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6ul-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sll-src"
+          - const: "fsl,imx51-src"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SRC interrupt
+      - description: CPU WDOG interrupts out of SRC
+    minItems: 1
+    maxItems: 2
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@73fd0000 {
+        compatible = "fsl,imx51-src";
+        reg = <0x73fd0000 0x4000>;
+        interrupts = <75>;
+        #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/reset/fsl,imx7-src.txt

-Freescale i.MX7 System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible:
-	- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
-	- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
-	- For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
-	- For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"
-	- For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon"
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain SRC interrupt
-- #reset-cells: 1, see below
-
-example:
-
-src: reset-controller@30390000 {
-     compatible = "fsl,imx7d-src", "syscon";
-     reg = <0x30390000 0x2000>;
-     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-     #reset-cells = <1>;
-};
-
-
-Specifying reset lines connected to IP modules
-==============================================
-
-The system reset controller can be used to reset various set of
-peripherals. Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-Example:
-
-	pcie: pcie@33800000 {
-
-		...
-
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
-		reset-names = "pciephy", "apps";
-
-		...
-        };
-
-
-For list of all valid reset indices see
-<dt-bindings/reset/imx7-reset.h> for i.MX7,
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and
-<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP

Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7 System Reset Controller
+
+maintainers:
+  - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+  The system reset controller can be used to reset various set of
+  peripherals. Device nodes that need access to reset lines should
+  specify them as a reset phandle in their corresponding node as
+  specified in reset.txt.
+
+  For list of all valid reset indices see
+    <dt-bindings/reset/imx7-reset.h> for i.MX7,
+    <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ, i.MX8MM and i.MX8MN,
+    <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP.
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - fsl,imx7d-src
+        - fsl,imx8mq-src
+        - fsl,imx8mp-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reset-controller@30390000 {
+        compatible = "fsl,imx7d-src", "syscon";
+        reg = <0x30390000 0x2000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt

-Qualcomm Resource Power Manager (RPM) over SMD
-
-This driver is used to interface with the Resource Power Manager (RPM) found in
-various Qualcomm platforms. The RPM allows each component in the system to vote
-for state of the system resources, such as clocks, regulators and bus
-frequencies.
-
-The SMD information for the RPM edge should be filled out.  See qcom,smd.txt for
-the required edge properties.  All SMD related properties will reside within the
-RPM node itself.
-
-= SUBDEVICES
-
-The RPM exposes resources to its subnodes.  The rpm_requests node must be
-present and this subnode may contain children that designate regulator
-resources.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-apq8084"
-		    "qcom,rpm-msm8916"
-		    "qcom,rpm-msm8974"
-		    "qcom,rpm-msm8976"
-		    "qcom,rpm-msm8998"
-		    "qcom,rpm-sdm660"
-		    "qcom,rpm-qcs404"
-
-- qcom,smd-channels:
-	Usage: required
-	Value type: <string>
-	Definition: must be "rpm_requests"
-
-Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
-for information on the regulator subnodes that can exist under the rpm_requests.
-
-Example:
-
-	soc {
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				...
-			};
-		};
-	};

Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Resource Power Manager (RPM) over SMD
+
+description: |
+  This driver is used to interface with the Resource Power Manager (RPM) found
+  in various Qualcomm platforms. The RPM allows each component in the system
+  to vote for state of the system resources, such as clocks, regulators and bus
+  frequencies.
+
+  The SMD information for the RPM edge should be filled out.  See qcom,smd.txt
+  for the required edge properties.  All SMD related properties will reside
+  within the RPM node itself.
+
+  The RPM exposes resources to its subnodes.  The rpm_requests node must be
+  present and this subnode may contain children that designate regulator
+  resources.
+
+  Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+  for information on the regulator subnodes that can exist under the
+  rpm_requests.
+
+maintainers:
+  - Kathiravan T <kathirav@codeaurora.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-apq8084
+      - qcom,rpm-ipq6018
+      - qcom,rpm-msm8916
+      - qcom,rpm-msm8974
+      - qcom,rpm-msm8976
+      - qcom,rpm-msm8996
+      - qcom,rpm-msm8998
+      - qcom,rpm-sdm660
+      - qcom,rpm-qcs404
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the RPM communication
+    items:
+      - const: rpm_requests
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,rpm-apq8084
+          - qcom,rpm-msm8916
+          - qcom,rpm-msm8974
+then:
+  required:
+    - qcom,smd-channels
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    smd {
+        compatible = "qcom,smd";
+
+        rpm {
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,ipc = <&apcs 8 0>;
+            qcom,smd-edge = <15>;
+
+                rpm_requests {
+                        compatible = "qcom,rpm-msm8974";
+                        qcom,smd-channels = "rpm_requests";
+
+                        /* Regulator nodes to follow */
+                };
+            };
+     };
+...

Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt

-* Texas Instruments K3 NavigatorSS Ring Accelerator
-
-The Ring Accelerator (RA) is a machine which converts read/write accesses
-from/to a constant address into corresponding read/write accesses from/to a
-circular data structure in memory. The RA eliminates the need for each DMA
-controller which needs to access ring elements from having to know the current
-state of the ring (base address, current offset). The DMA controller
-performs a read or write access to a specific address range (which maps to the
-source interface on the RA) and the RA replaces the address for the transaction
-with a new address which corresponds to the head or tail element of the ring
-(head for reads, tail for writes).
-
-The Ring Accelerator is a hardware module that is responsible for accelerating
-management of the packet queues. The K3 SoCs can have more than one RA instances
-
-Required properties:
-- compatible	: Must be "ti,am654-navss-ringacc";
-- reg		: Should contain register location and length of the following
-		  named register regions.
-- reg-names	: should be
-		  "rt" - The RA Ring Real-time Control/Status Registers
-		  "fifos" - The RA Queues Registers
-		  "proxy_gcfg" - The RA Proxy Global Config Registers
-		  "proxy_target" - The RA Proxy Datapath Registers
-- ti,num-rings	: Number of rings supported by RA
-- ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range
-- ti,sci	: phandle on TI-SCI compatible System controller node
-- ti,sci-dev-id	: TI-SCI device id of the ring accelerator
-- msi-parent	: phandle for "ti,sci-inta" interrupt controller
-
-Optional properties:
- -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability
-		  issue software w/a
-
-Example:
-
-ringacc: ringacc@3c000000 {
-	compatible = "ti,am654-navss-ringacc";
-	reg =	<0x0 0x3c000000 0x0 0x400000>,
-		<0x0 0x38000000 0x0 0x400000>,
-		<0x0 0x31120000 0x0 0x100>,
-		<0x0 0x33000000 0x0 0x40000>;
-	reg-names = "rt", "fifos",
-		    "proxy_gcfg", "proxy_target";
-	ti,num-rings = <818>;
-	ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
-	ti,dma-ring-reset-quirk;
-	ti,sci = <&dmsc>;
-	ti,sci-dev-id = <187>;
-	msi-parent = <&inta_main_udmass>;
-};
-
-client:
-
-dma_ipx: dma_ipx@<addr> {
-	...
-	ti,ringacc = <&ringacc>;
-	...
-}

Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments K3 NavigatorSS Ring Accelerator
+
+maintainers:
+  - Santosh Shilimkar <ssantosh@kernel.org>
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  The Ring Accelerator (RA) is a machine which converts read/write accesses
+  from/to a constant address into corresponding read/write accesses from/to a
+  circular data structure in memory. The RA eliminates the need for each DMA
+  controller which needs to access ring elements from having to know the current
+  state of the ring (base address, current offset). The DMA controller
+  performs a read or write access to a specific address range (which maps to the
+  source interface on the RA) and the RA replaces the address for the transaction
+  with a new address which corresponds to the head or tail element of the ring
+  (head for reads, tail for writes).
+
+  The Ring Accelerator is a hardware module that is responsible for accelerating
+  management of the packet queues. The K3 SoCs can have more than one RA instances
+
+properties:
+  compatible:
+    items:
+      - const: ti,am654-navss-ringacc
+
+  reg:
+    items:
+      - description: real time registers regions
+      - description: fifos registers regions
+      - description: proxy gcfg registers regions
+      - description: proxy target registers regions
+
+  reg-names:
+    items:
+      - const: rt
+      - const: fifos
+      - const: proxy_gcfg
+      - const: proxy_target
+
+  msi-parent: true
+
+  ti,num-rings:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of rings supported by RA
+
+  ti,sci-rm-range-gp-rings:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TI-SCI RM subtype for GP ring range
+
+  ti,sci:
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    description: phandle on TI-SCI compatible System controller node
+
+  ti,sci-dev-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TI-SCI device id of the ring accelerator
+
+  ti,dma-ring-reset-quirk:
+    $ref: /schemas/types.yaml#definitions/flag
+    description: |
+      enable ringacc/udma ring state interoperability issue software w/a
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,num-rings
+  - ti,sci-rm-range-gp-rings
+  - ti,sci
+  - ti,sci-dev-id
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ringacc: ringacc@3c000000 {
+            compatible = "ti,am654-navss-ringacc";
+            reg = <0x0 0x3c000000 0x0 0x400000>,
+                  <0x0 0x38000000 0x0 0x400000>,
+                  <0x0 0x31120000 0x0 0x100>,
+                  <0x0 0x33000000 0x0 0x40000>;
+            reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+            ti,num-rings = <818>;
+            ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+            ti,dma-ring-reset-quirk;
+            ti,sci = <&dmsc>;
+            ti,sci-dev-id = <187>;
+            msi-parent = <&inta_main_udmass>;
+        };
+    };

MAINTAINERS

@@ -11117,6 +11117,14 @@ F:	Documentation/core-api/boot-time-mm.rst
 F:	include/linux/memblock.h
 F:	mm/memblock.c
 
+MEMORY CONTROLLER DRIVERS
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl.git
+F:	Documentation/devicetree/bindings/memory-controllers/
+F:	drivers/memory/
+
 MEMORY MANAGEMENT
 M:	Andrew Morton <akpm@linux-foundation.org>
 L:	linux-mm@kvack.org
@@ -12729,6 +12737,7 @@ OP-TEE DRIVER
 M:	Jens Wiklander <jens.wiklander@linaro.org>
 L:	op-tee@lists.trustedfirmware.org
 S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-optee-devices
 F:	drivers/tee/optee/
 
 OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER

arch/arm/mach-exynos/Kconfig

@@ -118,6 +118,7 @@ config SOC_EXYNOS5800
 	bool "Samsung EXYNOS5800"
 	default y
 	depends on SOC_EXYNOS5420
+	select EXYNOS_REGULATOR_COUPLER
 
 config EXYNOS_MCPM
 	bool

arch/arm/mach-omap2/id.c

@@ -775,19 +775,23 @@ static const char * __init omap_get_family(void)
 		return kasprintf(GFP_KERNEL, "Unknown");
 }
 
-static ssize_t omap_get_type(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
+static ssize_t
+type_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%s\n", omap_types[omap_type()]);
 }
 
-static struct device_attribute omap_soc_attr =
-	__ATTR(type,  S_IRUGO, omap_get_type,  NULL);
+static DEVICE_ATTR_RO(type);
+
+static struct attribute *omap_soc_attrs[] = {
+	&dev_attr_type.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(omap_soc);
 
 void __init omap_soc_device_init(void)
 {
-	struct device *parent;
 	struct soc_device *soc_dev;
 	struct soc_device_attribute *soc_dev_attr;
 
@@ -798,14 +802,12 @@ void __init omap_soc_device_init(void)
 	soc_dev_attr->machine  = soc_name;
 	soc_dev_attr->family   = omap_get_family();
 	soc_dev_attr->revision = soc_rev;
+	soc_dev_attr->custom_attr_group = omap_soc_groups[0];
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr);
 		return;
 	}
-
-	parent = soc_device_to_device(soc_dev);
-	device_create_file(parent, &omap_soc_attr);
 }
 #endif /* CONFIG_SOC_BUS */

arch/arm64/configs/defconfig

@@ -881,7 +881,6 @@ CONFIG_OWL_PM_DOMAINS=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
-CONFIG_IMX_SCU_SOC=y
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_RMTFS_MEM=m

drivers/char/tpm/tpm_ftpm_tee.c

@@ -214,11 +214,10 @@ static int ftpm_tee_match(struct tee_ioctl_version_data *ver, const void *data)
  * Return:
  *	On success, 0. On failure, -errno.
  */
-static int ftpm_tee_probe(struct platform_device *pdev)
+static int ftpm_tee_probe(struct device *dev)
 {
 	int rc;
 	struct tpm_chip *chip;
-	struct device *dev = &pdev->dev;
 	struct ftpm_tee_private *pvt_data = NULL;
 	struct tee_ioctl_open_session_arg sess_arg;
 
@@ -297,6 +296,13 @@ static int ftpm_tee_probe(struct platform_device *pdev)
 	return rc;
 }
 
+static int ftpm_plat_tee_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return ftpm_tee_probe(dev);
+}
+
 /**
  * ftpm_tee_remove() - remove the TPM device
  * @pdev: the platform_device description.
@@ -304,9 +310,9 @@ static int ftpm_tee_probe(struct platform_device *pdev)
  * Return:
  *	0 always.
  */
-static int ftpm_tee_remove(struct platform_device *pdev)
+static int ftpm_tee_remove(struct device *dev)
 {
-	struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
+	struct ftpm_tee_private *pvt_data = dev_get_drvdata(dev);
 
 	/* Release the chip */
 	tpm_chip_unregister(pvt_data->chip);
@@ -328,11 +334,18 @@ static int ftpm_tee_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int ftpm_plat_tee_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	return ftpm_tee_remove(dev);
+}
+
 /**
  * ftpm_tee_shutdown() - shutdown the TPM device
  * @pdev: the platform_device description.
  */
-static void ftpm_tee_shutdown(struct platform_device *pdev)
+static void ftpm_plat_tee_shutdown(struct platform_device *pdev)
 {
 	struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
 
@@ -347,17 +360,54 @@ static const struct of_device_id of_ftpm_tee_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, of_ftpm_tee_ids);
 
-static struct platform_driver ftpm_tee_driver = {
+static struct platform_driver ftpm_tee_plat_driver = {
 	.driver = {
 		.name = "ftpm-tee",
 		.of_match_table = of_match_ptr(of_ftpm_tee_ids),
 	},
-	.probe = ftpm_tee_probe,
-	.remove = ftpm_tee_remove,
-	.shutdown = ftpm_tee_shutdown,
+	.shutdown = ftpm_plat_tee_shutdown,
+	.probe = ftpm_plat_tee_probe,
+	.remove = ftpm_plat_tee_remove,
+};
+
+/* UUID of the fTPM TA */
+static const struct tee_client_device_id optee_ftpm_id_table[] = {
+	{UUID_INIT(0xbc50d971, 0xd4c9, 0x42c4,
+		   0x82, 0xcb, 0x34, 0x3f, 0xb7, 0xf3, 0x78, 0x96)},
+	{}
 };
 
-module_platform_driver(ftpm_tee_driver);
+MODULE_DEVICE_TABLE(tee, optee_ftpm_id_table);
+
+static struct tee_client_driver ftpm_tee_driver = {
+	.id_table	= optee_ftpm_id_table,
+	.driver		= {
+		.name		= "optee-ftpm",
+		.bus		= &tee_bus_type,
+		.probe		= ftpm_tee_probe,
+		.remove		= ftpm_tee_remove,
+	},
+};
+
+static int __init ftpm_mod_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&ftpm_tee_plat_driver);
+	if (rc)
+		return rc;
+
+	return driver_register(&ftpm_tee_driver.driver);
+}
+
+static void __exit ftpm_mod_exit(void)
+{
+	platform_driver_unregister(&ftpm_tee_plat_driver);
+	driver_unregister(&ftpm_tee_driver.driver);
+}
+
+module_init(ftpm_mod_init);
+module_exit(ftpm_mod_exit);
 
 MODULE_AUTHOR("Thirupathaiah Annapureddy <thiruan@microsoft.com>");
 MODULE_DESCRIPTION("TPM Driver for fTPM TA in TEE");

drivers/clk/clk-scmi.c

@@ -103,6 +103,8 @@ static const struct clk_ops scmi_clk_ops = {
 static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk)
 {
 	int ret;
+	unsigned long min_rate, max_rate;
+
 	struct clk_init_data init = {
 		.flags = CLK_GET_RATE_NOCACHE,
 		.num_parents = 0,
@@ -112,9 +114,23 @@ static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk)
 
 	sclk->hw.init = &init;
 	ret = devm_clk_hw_register(dev, &sclk->hw);
-	if (!ret)
-		clk_hw_set_rate_range(&sclk->hw, sclk->info->range.min_rate,
-				      sclk->info->range.max_rate);
+	if (ret)
+		return ret;
+
+	if (sclk->info->rate_discrete) {
+		int num_rates = sclk->info->list.num_rates;
+
+		if (num_rates <= 0)
+			return -EINVAL;
+
+		min_rate = sclk->info->list.rates[0];
+		max_rate = sclk->info->list.rates[num_rates - 1];
+	} else {
+		min_rate = sclk->info->range.min_rate;
+		max_rate = sclk->info->range.max_rate;
+	}
+
+	clk_hw_set_rate_range(&sclk->hw, min_rate, max_rate);
 	return ret;
 }
 

drivers/cpufreq/scmi-cpufreq.c

@@ -198,7 +198,8 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 
 	policy->cpuinfo.transition_latency = latency;
 
-	policy->fast_switch_possible = true;
+	policy->fast_switch_possible =
+		handle->perf_ops->fast_switch_possible(handle, cpu_dev);
 
 	em_register_perf_domain(policy->cpus, nr_opp, &em_cb);
 

drivers/dma/ti/k3-udma-glue.c

@@ -271,20 +271,12 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev,
 	atomic_set(&tx_chn->free_pkts, cfg->txcq_cfg.size);
 
 	/* request and cfg rings */
-	tx_chn->ringtx = k3_ringacc_request_ring(tx_chn->common.ringacc,
-						 tx_chn->udma_tchan_id, 0);
-	if (!tx_chn->ringtx) {
-		ret = -ENODEV;
-		dev_err(dev, "Failed to get TX ring %u\n",
-			tx_chn->udma_tchan_id);
-		goto err;
-	}
-
-	tx_chn->ringtxcq = k3_ringacc_request_ring(tx_chn->common.ringacc,
-						   -1, 0);
-	if (!tx_chn->ringtxcq) {
-		ret = -ENODEV;
-		dev_err(dev, "Failed to get TXCQ ring\n");
+	ret =  k3_ringacc_request_rings_pair(tx_chn->common.ringacc,
+					     tx_chn->udma_tchan_id, -1,
+					     &tx_chn->ringtx,
+					     &tx_chn->ringtxcq);
+	if (ret) {
+		dev_err(dev, "Failed to get TX/TXCQ rings %d\n", ret);
 		goto err;
 	}
 
@@ -587,22 +579,16 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
 	}
 
 	/* request and cfg rings */
-	flow->ringrx = k3_ringacc_request_ring(rx_chn->common.ringacc,
-					       flow_cfg->ring_rxq_id, 0);
-	if (!flow->ringrx) {
-		ret = -ENODEV;
-		dev_err(dev, "Failed to get RX ring\n");
+	ret =  k3_ringacc_request_rings_pair(rx_chn->common.ringacc,
+					     flow_cfg->ring_rxq_id,
+					     flow_cfg->ring_rxfdq0_id,
+					     &flow->ringrxfdq,
+					     &flow->ringrx);
+	if (ret) {
+		dev_err(dev, "Failed to get RX/RXFDQ rings %d\n", ret);
 		goto err_rflow_put;
 	}
 
-	flow->ringrxfdq = k3_ringacc_request_ring(rx_chn->common.ringacc,
-						  flow_cfg->ring_rxfdq0_id, 0);
-	if (!flow->ringrxfdq) {
-		ret = -ENODEV;
-		dev_err(dev, "Failed to get RXFDQ ring\n");
-		goto err_ringrx_free;
-	}
-
 	ret = k3_ringacc_ring_cfg(flow->ringrx, &flow_cfg->rx_cfg);
 	if (ret) {
 		dev_err(dev, "Failed to cfg ringrx %d\n", ret);
@@ -673,8 +659,6 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
 
 err_ringrxfdq_free:
 	k3_ringacc_ring_free(flow->ringrxfdq);
-
-err_ringrx_free:
 	k3_ringacc_ring_free(flow->ringrx);
 
 err_rflow_put:

drivers/dma/ti/k3-udma.c

@@ -1418,17 +1418,12 @@ static int udma_alloc_tx_resources(struct udma_chan *uc)
 	if (ret)
 		return ret;
 
-	uc->tchan->t_ring = k3_ringacc_request_ring(ud->ringacc,
-						    uc->tchan->id, 0);
-	if (!uc->tchan->t_ring) {
-		ret = -EBUSY;
-		goto err_tx_ring;
-	}
-
-	uc->tchan->tc_ring = k3_ringacc_request_ring(ud->ringacc, -1, 0);
-	if (!uc->tchan->tc_ring) {
+	ret = k3_ringacc_request_rings_pair(ud->ringacc, uc->tchan->id, -1,
+					    &uc->tchan->t_ring,
+					    &uc->tchan->tc_ring);
+	if (ret) {
 		ret = -EBUSY;
-		goto err_txc_ring;
+		goto err_ring;
 	}
 
 	memset(&ring_cfg, 0, sizeof(ring_cfg));
@@ -1447,10 +1442,9 @@ static int udma_alloc_tx_resources(struct udma_chan *uc)
 err_ringcfg:
 	k3_ringacc_ring_free(uc->tchan->tc_ring);
 	uc->tchan->tc_ring = NULL;
-err_txc_ring:
 	k3_ringacc_ring_free(uc->tchan->t_ring);
 	uc->tchan->t_ring = NULL;
-err_tx_ring:
+err_ring:
 	udma_put_tchan(uc);
 
 	return ret;
@@ -1499,16 +1493,11 @@ static int udma_alloc_rx_resources(struct udma_chan *uc)
 
 	rflow = uc->rflow;
 	fd_ring_id = ud->tchan_cnt + ud->echan_cnt + uc->rchan->id;
-	rflow->fd_ring = k3_ringacc_request_ring(ud->ringacc, fd_ring_id, 0);
-	if (!rflow->fd_ring) {
-		ret = -EBUSY;
-		goto err_rx_ring;
-	}
-
-	rflow->r_ring = k3_ringacc_request_ring(ud->ringacc, -1, 0);
-	if (!rflow->r_ring) {
+	ret = k3_ringacc_request_rings_pair(ud->ringacc, fd_ring_id, -1,
+					    &rflow->fd_ring, &rflow->r_ring);
+	if (ret) {
 		ret = -EBUSY;
-		goto err_rxc_ring;
+		goto err_ring;
 	}
 
 	memset(&ring_cfg, 0, sizeof(ring_cfg));
@@ -1533,10 +1522,9 @@ static int udma_alloc_rx_resources(struct udma_chan *uc)
 err_ringcfg:
 	k3_ringacc_ring_free(rflow->r_ring);
 	rflow->r_ring = NULL;
-err_rxc_ring:
 	k3_ringacc_ring_free(rflow->fd_ring);
 	rflow->fd_ring = NULL;
-err_rx_ring:
+err_ring:
 	udma_put_rflow(uc);
 err_rflow:
 	udma_put_rchan(uc);

drivers/firmware/arm_scmi/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 obj-y	= scmi-bus.o scmi-driver.o scmi-protocols.o scmi-transport.o
 scmi-bus-y = bus.o
-scmi-driver-y = driver.o
+scmi-driver-y = driver.o notify.o
 scmi-transport-y = shmem.o
 scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
-scmi-transport-$(CONFIG_ARM_PSCI_FW) += smc.o
+scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
 scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
 obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o

drivers/firmware/arm_scmi/base.c

@@ -5,7 +5,15 @@
  * Copyright (C) 2018 ARM Ltd.
  */
 
+#define pr_fmt(fmt) "SCMI Notifications BASE - " fmt
+
+#include <linux/scmi_protocol.h>
+
 #include "common.h"
+#include "notify.h"
+
+#define SCMI_BASE_NUM_SOURCES		1
+#define SCMI_BASE_MAX_CMD_ERR_COUNT	1024
 
 enum scmi_base_protocol_cmd {
 	BASE_DISCOVER_VENDOR = 0x3,
@@ -19,16 +27,25 @@ enum scmi_base_protocol_cmd {
 	BASE_RESET_AGENT_CONFIGURATION = 0xb,
 };
 
-enum scmi_base_protocol_notify {
-	BASE_ERROR_EVENT = 0x0,
-};
-
 struct scmi_msg_resp_base_attributes {
 	u8 num_protocols;
 	u8 num_agents;
 	__le16 reserved;
 };
 
+struct scmi_msg_base_error_notify {
+	__le32 event_control;
+#define BASE_TP_NOTIFY_ALL	BIT(0)
+};
+
+struct scmi_base_error_notify_payld {
+	__le32 agent_id;
+	__le32 error_status;
+#define IS_FATAL_ERROR(x)	((x) & BIT(31))
+#define ERROR_CMD_COUNT(x)	FIELD_GET(GENMASK(9, 0), (x))
+	__le64 msg_reports[SCMI_BASE_MAX_CMD_ERR_COUNT];
+};
+
 /**
  * scmi_base_attributes_get() - gets the implementation details
  *	that are associated with the base protocol.
@@ -222,6 +239,83 @@ static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
 	return ret;
 }
 
+static int scmi_base_error_notify(const struct scmi_handle *handle, bool enable)
+{
+	int ret;
+	u32 evt_cntl = enable ? BASE_TP_NOTIFY_ALL : 0;
+	struct scmi_xfer *t;
+	struct scmi_msg_base_error_notify *cfg;
+
+	ret = scmi_xfer_get_init(handle, BASE_NOTIFY_ERRORS,
+				 SCMI_PROTOCOL_BASE, sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->event_control = cpu_to_le32(evt_cntl);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_base_set_notify_enabled(const struct scmi_handle *handle,
+					u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_base_error_notify(handle, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] ret:%d\n", evt_id, ret);
+
+	return ret;
+}
+
+static void *scmi_base_fill_custom_report(const struct scmi_handle *handle,
+					  u8 evt_id, ktime_t timestamp,
+					  const void *payld, size_t payld_sz,
+					  void *report, u32 *src_id)
+{
+	int i;
+	const struct scmi_base_error_notify_payld *p = payld;
+	struct scmi_base_error_report *r = report;
+
+	/*
+	 * BaseError notification payload is variable in size but
+	 * up to a maximum length determined by the struct ponted by p.
+	 * Instead payld_sz is the effective length of this notification
+	 * payload so cannot be greater of the maximum allowed size as
+	 * pointed by p.
+	 */
+	if (evt_id != SCMI_EVENT_BASE_ERROR_EVENT || sizeof(*p) < payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->fatal = IS_FATAL_ERROR(le32_to_cpu(p->error_status));
+	r->cmd_count = ERROR_CMD_COUNT(le32_to_cpu(p->error_status));
+	for (i = 0; i < r->cmd_count; i++)
+		r->reports[i] = le64_to_cpu(p->msg_reports[i]);
+	*src_id = 0;
+
+	return r;
+}
+
+static const struct scmi_event base_events[] = {
+	{
+		.id = SCMI_EVENT_BASE_ERROR_EVENT,
+		.max_payld_sz = sizeof(struct scmi_base_error_notify_payld),
+		.max_report_sz = sizeof(struct scmi_base_error_report) +
+				  SCMI_BASE_MAX_CMD_ERR_COUNT * sizeof(u64),
+	},
+};
+
+static const struct scmi_event_ops base_event_ops = {
+	.set_notify_enabled = scmi_base_set_notify_enabled,
+	.fill_custom_report = scmi_base_fill_custom_report,
+};
+
 int scmi_base_protocol_init(struct scmi_handle *h)
 {
 	int id, ret;
@@ -256,6 +350,12 @@ int scmi_base_protocol_init(struct scmi_handle *h)
 	dev_dbg(dev, "Found %d protocol(s) %d agent(s)\n", rev->num_protocols,
 		rev->num_agents);
 
+	scmi_register_protocol_events(handle, SCMI_PROTOCOL_BASE,
+				      (4 * SCMI_PROTO_QUEUE_SZ),
+				      &base_event_ops, base_events,
+				      ARRAY_SIZE(base_events),
+				      SCMI_BASE_NUM_SOURCES);
+
 	for (id = 0; id < rev->num_agents; id++) {
 		scmi_base_discover_agent_get(handle, id, name);
 		dev_dbg(dev, "Agent %d: %s\n", id, name);

drivers/firmware/arm_scmi/clock.c

@@ -5,6 +5,8 @@
  * Copyright (C) 2018 ARM Ltd.
  */
 
+#include <linux/sort.h>
+
 #include "common.h"
 
 enum scmi_clock_protocol_cmd {
@@ -121,11 +123,23 @@ static int scmi_clock_attributes_get(const struct scmi_handle *handle,
 	return ret;
 }
 
+static int rate_cmp_func(const void *_r1, const void *_r2)
+{
+	const u64 *r1 = _r1, *r2 = _r2;
+
+	if (*r1 < *r2)
+		return -1;
+	else if (*r1 == *r2)
+		return 0;
+	else
+		return 1;
+}
+
 static int
 scmi_clock_describe_rates_get(const struct scmi_handle *handle, u32 clk_id,
 			      struct scmi_clock_info *clk)
 {
-	u64 *rate;
+	u64 *rate = NULL;
 	int ret, cnt;
 	bool rate_discrete = false;
 	u32 tot_rate_cnt = 0, rates_flag;
@@ -184,8 +198,10 @@ scmi_clock_describe_rates_get(const struct scmi_handle *handle, u32 clk_id,
 		 */
 	} while (num_returned && num_remaining);
 
-	if (rate_discrete)
+	if (rate_discrete && rate) {
 		clk->list.num_rates = tot_rate_cnt;
+		sort(rate, tot_rate_cnt, sizeof(*rate), rate_cmp_func, NULL);
+	}
 
 	clk->rate_discrete = rate_discrete;
 

drivers/firmware/arm_scmi/common.h

@@ -6,6 +6,8 @@
  *
  * Copyright (C) 2018 ARM Ltd.
  */
+#ifndef _SCMI_COMMON_H
+#define _SCMI_COMMON_H
 
 #include <linux/bitfield.h>
 #include <linux/completion.h>
@@ -235,3 +237,5 @@ void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem,
 void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem);
 bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
 		     struct scmi_xfer *xfer);
+
+#endif /* _SCMI_COMMON_H */

drivers/firmware/arm_scmi/driver.c

@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 
 #include "common.h"
+#include "notify.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/scmi.h>
@@ -208,7 +209,9 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr)
 	struct device *dev = cinfo->dev;
 	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
 	struct scmi_xfers_info *minfo = &info->rx_minfo;
+	ktime_t ts;
 
+	ts = ktime_get_boottime();
 	xfer = scmi_xfer_get(cinfo->handle, minfo);
 	if (IS_ERR(xfer)) {
 		dev_err(dev, "failed to get free message slot (%ld)\n",
@@ -221,6 +224,8 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr)
 	scmi_dump_header_dbg(dev, &xfer->hdr);
 	info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size,
 					    xfer);
+	scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
+		    xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts);
 
 	trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
 			   xfer->hdr.protocol_id, xfer->hdr.seq,
@@ -392,8 +397,7 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 		info->desc->ops->mark_txdone(cinfo, ret);
 
 	trace_scmi_xfer_end(xfer->transfer_id, xfer->hdr.id,
-			    xfer->hdr.protocol_id, xfer->hdr.seq,
-			    xfer->hdr.status);
+			    xfer->hdr.protocol_id, xfer->hdr.seq, ret);
 
 	return ret;
 }
@@ -789,6 +793,9 @@ static int scmi_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (scmi_notification_init(handle))
+		dev_err(dev, "SCMI Notifications NOT available.\n");
+
 	ret = scmi_base_protocol_init(handle);
 	if (ret) {
 		dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
@@ -831,6 +838,8 @@ static int scmi_remove(struct platform_device *pdev)
 	struct scmi_info *info = platform_get_drvdata(pdev);
 	struct idr *idr = &info->tx_idr;
 
+	scmi_notification_exit(&info->handle);
+
 	mutex_lock(&scmi_list_mutex);
 	if (info->users)
 		ret = -EBUSY;
@@ -901,7 +910,7 @@ ATTRIBUTE_GROUPS(versions);
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
 	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
-#ifdef CONFIG_ARM_PSCI_FW
+#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
 	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
 #endif
 	{ /* Sentinel */ },

drivers/firmware/arm_scmi/notify.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * System Control and Management Interface (SCMI) Message Protocol
+ * notification header file containing some definitions, structures
+ * and function prototypes related to SCMI Notification handling.
+ *
+ * Copyright (C) 2020 ARM Ltd.
+ */
+#ifndef _SCMI_NOTIFY_H
+#define _SCMI_NOTIFY_H
+
+#include <linux/device.h>
+#include <linux/ktime.h>
+#include <linux/types.h>
+
+#define SCMI_PROTO_QUEUE_SZ	4096
+
+/**
+ * struct scmi_event  - Describes an event to be supported
+ * @id: Event ID
+ * @max_payld_sz: Max possible size for the payload of a notification message
+ * @max_report_sz: Max possible size for the report of a notification message
+ *
+ * Each SCMI protocol, during its initialization phase, can describe the events
+ * it wishes to support in a few struct scmi_event and pass them to the core
+ * using scmi_register_protocol_events().
+ */
+struct scmi_event {
+	u8	id;
+	size_t	max_payld_sz;
+	size_t	max_report_sz;
+};
+
+/**
+ * struct scmi_event_ops  - Protocol helpers called by the notification core.
+ * @set_notify_enabled: Enable/disable the required evt_id/src_id notifications
+ *			using the proper custom protocol commands.
+ *			Return 0 on Success
+ * @fill_custom_report: fills a custom event report from the provided
+ *			event message payld identifying the event
+ *			specific src_id.
+ *			Return NULL on failure otherwise @report now fully
+ *			populated
+ *
+ * Context: Helpers described in &struct scmi_event_ops are called only in
+ *	    process context.
+ */
+struct scmi_event_ops {
+	int (*set_notify_enabled)(const struct scmi_handle *handle,
+				  u8 evt_id, u32 src_id, bool enabled);
+	void *(*fill_custom_report)(const struct scmi_handle *handle,
+				    u8 evt_id, ktime_t timestamp,
+				    const void *payld, size_t payld_sz,
+				    void *report, u32 *src_id);
+};
+
+int scmi_notification_init(struct scmi_handle *handle);
+void scmi_notification_exit(struct scmi_handle *handle);
+
+int scmi_register_protocol_events(const struct scmi_handle *handle,
+				  u8 proto_id, size_t queue_sz,
+				  const struct scmi_event_ops *ops,
+				  const struct scmi_event *evt, int num_events,
+				  int num_sources);
+int scmi_notify(const struct scmi_handle *handle, u8 proto_id, u8 evt_id,
+		const void *buf, size_t len, ktime_t ts);
+
+#endif /* _SCMI_NOTIFY_H */

drivers/firmware/arm_scmi/perf.c

@@ -5,15 +5,19 @@
  * Copyright (C) 2018 ARM Ltd.
  */
 
+#define pr_fmt(fmt) "SCMI Notifications PERF - " fmt
+
 #include <linux/bits.h>
 #include <linux/of.h>
 #include <linux/io.h>
 #include <linux/io-64-nonatomic-hi-lo.h>
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
+#include <linux/scmi_protocol.h>
 #include <linux/sort.h>
 
 #include "common.h"
+#include "notify.h"
 
 enum scmi_performance_protocol_cmd {
 	PERF_DOMAIN_ATTRIBUTES = 0x3,
@@ -27,11 +31,6 @@ enum scmi_performance_protocol_cmd {
 	PERF_DESCRIBE_FASTCHANNEL = 0xb,
 };
 
-enum scmi_performance_protocol_notify {
-	PERFORMANCE_LIMITS_CHANGED = 0x0,
-	PERFORMANCE_LEVEL_CHANGED = 0x1,
-};
-
 struct scmi_opp {
 	u32 perf;
 	u32 power;
@@ -86,6 +85,19 @@ struct scmi_perf_notify_level_or_limits {
 	__le32 notify_enable;
 };
 
+struct scmi_perf_limits_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 range_max;
+	__le32 range_min;
+};
+
+struct scmi_perf_level_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 performance_level;
+};
+
 struct scmi_msg_resp_perf_describe_levels {
 	__le16 num_returned;
 	__le16 num_remaining;
@@ -158,6 +170,11 @@ struct scmi_perf_info {
 	struct perf_dom_info *dom_info;
 };
 
+static enum scmi_performance_protocol_cmd evt_2_cmd[] = {
+	PERF_NOTIFY_LIMITS,
+	PERF_NOTIFY_LEVEL,
+};
+
 static int scmi_perf_attributes_get(const struct scmi_handle *handle,
 				    struct scmi_perf_info *pi)
 {
@@ -488,6 +505,29 @@ static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
 	return scmi_perf_mb_level_get(handle, domain, level, poll);
 }
 
+static int scmi_perf_level_limits_notify(const struct scmi_handle *handle,
+					 u32 domain, int message_id,
+					 bool enable)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_notify_level_or_limits *notify;
+
+	ret = scmi_xfer_get_init(handle, message_id, SCMI_PROTOCOL_PERF,
+				 sizeof(*notify), 0, &t);
+	if (ret)
+		return ret;
+
+	notify = t->tx.buf;
+	notify->domain = cpu_to_le32(domain);
+	notify->notify_enable = enable ? cpu_to_le32(BIT(0)) : 0;
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
 static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size)
 {
 	if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4)
@@ -697,6 +737,17 @@ static int scmi_dvfs_est_power_get(const struct scmi_handle *handle, u32 domain,
 	return ret;
 }
 
+static bool scmi_fast_switch_possible(const struct scmi_handle *handle,
+				      struct device *dev)
+{
+	struct perf_dom_info *dom;
+	struct scmi_perf_info *pi = handle->perf_priv;
+
+	dom = pi->dom_info + scmi_dev_domain_id(dev);
+
+	return dom->fc_info && dom->fc_info->level_set_addr;
+}
+
 static struct scmi_perf_ops perf_ops = {
 	.limits_set = scmi_perf_limits_set,
 	.limits_get = scmi_perf_limits_get,
@@ -708,6 +759,90 @@ static struct scmi_perf_ops perf_ops = {
 	.freq_set = scmi_dvfs_freq_set,
 	.freq_get = scmi_dvfs_freq_get,
 	.est_power_get = scmi_dvfs_est_power_get,
+	.fast_switch_possible = scmi_fast_switch_possible,
+};
+
+static int scmi_perf_set_notify_enabled(const struct scmi_handle *handle,
+					u8 evt_id, u32 src_id, bool enable)
+{
+	int ret, cmd_id;
+
+	if (evt_id >= ARRAY_SIZE(evt_2_cmd))
+		return -EINVAL;
+
+	cmd_id = evt_2_cmd[evt_id];
+	ret = scmi_perf_level_limits_notify(handle, src_id, cmd_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_perf_fill_custom_report(const struct scmi_handle *handle,
+					  u8 evt_id, ktime_t timestamp,
+					  const void *payld, size_t payld_sz,
+					  void *report, u32 *src_id)
+{
+	void *rep = NULL;
+
+	switch (evt_id) {
+	case SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED:
+	{
+		const struct scmi_perf_limits_notify_payld *p = payld;
+		struct scmi_perf_limits_report *r = report;
+
+		if (sizeof(*p) != payld_sz)
+			break;
+
+		r->timestamp = timestamp;
+		r->agent_id = le32_to_cpu(p->agent_id);
+		r->domain_id = le32_to_cpu(p->domain_id);
+		r->range_max = le32_to_cpu(p->range_max);
+		r->range_min = le32_to_cpu(p->range_min);
+		*src_id = r->domain_id;
+		rep = r;
+		break;
+	}
+	case SCMI_EVENT_PERFORMANCE_LEVEL_CHANGED:
+	{
+		const struct scmi_perf_level_notify_payld *p = payld;
+		struct scmi_perf_level_report *r = report;
+
+		if (sizeof(*p) != payld_sz)
+			break;
+
+		r->timestamp = timestamp;
+		r->agent_id = le32_to_cpu(p->agent_id);
+		r->domain_id = le32_to_cpu(p->domain_id);
+		r->performance_level = le32_to_cpu(p->performance_level);
+		*src_id = r->domain_id;
+		rep = r;
+		break;
+	}
+	default:
+		break;
+	}
+
+	return rep;
+}
+
+static const struct scmi_event perf_events[] = {
+	{
+		.id = SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED,
+		.max_payld_sz = sizeof(struct scmi_perf_limits_notify_payld),
+		.max_report_sz = sizeof(struct scmi_perf_limits_report),
+	},
+	{
+		.id = SCMI_EVENT_PERFORMANCE_LEVEL_CHANGED,
+		.max_payld_sz = sizeof(struct scmi_perf_level_notify_payld),
+		.max_report_sz = sizeof(struct scmi_perf_level_report),
+	},
+};
+
+static const struct scmi_event_ops perf_event_ops = {
+	.set_notify_enabled = scmi_perf_set_notify_enabled,
+	.fill_custom_report = scmi_perf_fill_custom_report,
 };
 
 static int scmi_perf_protocol_init(struct scmi_handle *handle)
@@ -742,6 +877,12 @@ static int scmi_perf_protocol_init(struct scmi_handle *handle)
 			scmi_perf_domain_init_fc(handle, domain, &dom->fc_info);
 	}
 
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_PERF, SCMI_PROTO_QUEUE_SZ,
+				      &perf_event_ops, perf_events,
+				      ARRAY_SIZE(perf_events),
+				      pinfo->num_domains);
+
 	pinfo->version = version;
 	handle->perf_ops = &perf_ops;
 	handle->perf_priv = pinfo;

drivers/firmware/arm_scmi/power.c

@@ -5,19 +5,18 @@
  * Copyright (C) 2018 ARM Ltd.
  */
 
+#define pr_fmt(fmt) "SCMI Notifications POWER - " fmt
+
+#include <linux/scmi_protocol.h>
+
 #include "common.h"
+#include "notify.h"
 
 enum scmi_power_protocol_cmd {
 	POWER_DOMAIN_ATTRIBUTES = 0x3,
 	POWER_STATE_SET = 0x4,
 	POWER_STATE_GET = 0x5,
 	POWER_STATE_NOTIFY = 0x6,
-	POWER_STATE_CHANGE_REQUESTED_NOTIFY = 0x7,
-};
-
-enum scmi_power_protocol_notify {
-	POWER_STATE_CHANGED = 0x0,
-	POWER_STATE_CHANGE_REQUESTED = 0x1,
 };
 
 struct scmi_msg_resp_power_attributes {
@@ -48,6 +47,12 @@ struct scmi_power_state_notify {
 	__le32 notify_enable;
 };
 
+struct scmi_power_state_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 power_state;
+};
+
 struct power_dom_info {
 	bool state_set_sync;
 	bool state_set_async;
@@ -186,6 +191,75 @@ static struct scmi_power_ops power_ops = {
 	.state_get = scmi_power_state_get,
 };
 
+static int scmi_power_request_notify(const struct scmi_handle *handle,
+				     u32 domain, bool enable)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_power_state_notify *notify;
+
+	ret = scmi_xfer_get_init(handle, POWER_STATE_NOTIFY,
+				 SCMI_PROTOCOL_POWER, sizeof(*notify), 0, &t);
+	if (ret)
+		return ret;
+
+	notify = t->tx.buf;
+	notify->domain = cpu_to_le32(domain);
+	notify->notify_enable = enable ? cpu_to_le32(BIT(0)) : 0;
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_power_set_notify_enabled(const struct scmi_handle *handle,
+					 u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_power_request_notify(handle, src_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLE - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_power_fill_custom_report(const struct scmi_handle *handle,
+					   u8 evt_id, ktime_t timestamp,
+					   const void *payld, size_t payld_sz,
+					   void *report, u32 *src_id)
+{
+	const struct scmi_power_state_notify_payld *p = payld;
+	struct scmi_power_state_changed_report *r = report;
+
+	if (evt_id != SCMI_EVENT_POWER_STATE_CHANGED || sizeof(*p) != payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->domain_id = le32_to_cpu(p->domain_id);
+	r->power_state = le32_to_cpu(p->power_state);
+	*src_id = r->domain_id;
+
+	return r;
+}
+
+static const struct scmi_event power_events[] = {
+	{
+		.id = SCMI_EVENT_POWER_STATE_CHANGED,
+		.max_payld_sz = sizeof(struct scmi_power_state_notify_payld),
+		.max_report_sz =
+			sizeof(struct scmi_power_state_changed_report),
+	},
+};
+
+static const struct scmi_event_ops power_event_ops = {
+	.set_notify_enabled = scmi_power_set_notify_enabled,
+	.fill_custom_report = scmi_power_fill_custom_report,
+};
+
 static int scmi_power_protocol_init(struct scmi_handle *handle)
 {
 	int domain;
@@ -214,6 +288,12 @@ static int scmi_power_protocol_init(struct scmi_handle *handle)
 		scmi_power_domain_attributes_get(handle, domain, dom);
 	}
 
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_POWER, SCMI_PROTO_QUEUE_SZ,
+				      &power_event_ops, power_events,
+				      ARRAY_SIZE(power_events),
+				      pinfo->num_domains);
+
 	pinfo->version = version;
 	handle->power_ops = &power_ops;
 	handle->power_priv = pinfo;

drivers/firmware/arm_scmi/reset.c

@@ -5,7 +5,12 @@
  * Copyright (C) 2019 ARM Ltd.
  */
 
+#define pr_fmt(fmt) "SCMI Notifications RESET - " fmt
+
+#include <linux/scmi_protocol.h>
+
 #include "common.h"
+#include "notify.h"
 
 enum scmi_reset_protocol_cmd {
 	RESET_DOMAIN_ATTRIBUTES = 0x3,
@@ -13,10 +18,6 @@ enum scmi_reset_protocol_cmd {
 	RESET_NOTIFY = 0x5,
 };
 
-enum scmi_reset_protocol_notify {
-	RESET_ISSUED = 0x0,
-};
-
 #define NUM_RESET_DOMAIN_MASK	0xffff
 #define RESET_NOTIFY_ENABLE	BIT(0)
 
@@ -40,6 +41,18 @@ struct scmi_msg_reset_domain_reset {
 #define ARCH_COLD_RESET		(ARCH_RESET_TYPE | COLD_RESET_STATE)
 };
 
+struct scmi_msg_reset_notify {
+	__le32 id;
+	__le32 event_control;
+#define RESET_TP_NOTIFY_ALL	BIT(0)
+};
+
+struct scmi_reset_issued_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 reset_state;
+};
+
 struct reset_dom_info {
 	bool async_reset;
 	bool reset_notify;
@@ -190,6 +203,75 @@ static struct scmi_reset_ops reset_ops = {
 	.deassert = scmi_reset_domain_deassert,
 };
 
+static int scmi_reset_notify(const struct scmi_handle *handle, u32 domain_id,
+			     bool enable)
+{
+	int ret;
+	u32 evt_cntl = enable ? RESET_TP_NOTIFY_ALL : 0;
+	struct scmi_xfer *t;
+	struct scmi_msg_reset_notify *cfg;
+
+	ret = scmi_xfer_get_init(handle, RESET_NOTIFY,
+				 SCMI_PROTOCOL_RESET, sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->id = cpu_to_le32(domain_id);
+	cfg->event_control = cpu_to_le32(evt_cntl);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_reset_set_notify_enabled(const struct scmi_handle *handle,
+					 u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_reset_notify(handle, src_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_reset_fill_custom_report(const struct scmi_handle *handle,
+					   u8 evt_id, ktime_t timestamp,
+					   const void *payld, size_t payld_sz,
+					   void *report, u32 *src_id)
+{
+	const struct scmi_reset_issued_notify_payld *p = payld;
+	struct scmi_reset_issued_report *r = report;
+
+	if (evt_id != SCMI_EVENT_RESET_ISSUED || sizeof(*p) != payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->domain_id = le32_to_cpu(p->domain_id);
+	r->reset_state = le32_to_cpu(p->reset_state);
+	*src_id = r->domain_id;
+
+	return r;
+}
+
+static const struct scmi_event reset_events[] = {
+	{
+		.id = SCMI_EVENT_RESET_ISSUED,
+		.max_payld_sz = sizeof(struct scmi_reset_issued_notify_payld),
+		.max_report_sz = sizeof(struct scmi_reset_issued_report),
+	},
+};
+
+static const struct scmi_event_ops reset_event_ops = {
+	.set_notify_enabled = scmi_reset_set_notify_enabled,
+	.fill_custom_report = scmi_reset_fill_custom_report,
+};
+
 static int scmi_reset_protocol_init(struct scmi_handle *handle)
 {
 	int domain;
@@ -218,6 +300,12 @@ static int scmi_reset_protocol_init(struct scmi_handle *handle)
 		scmi_reset_domain_attributes_get(handle, domain, dom);
 	}
 
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_RESET, SCMI_PROTO_QUEUE_SZ,
+				      &reset_event_ops, reset_events,
+				      ARRAY_SIZE(reset_events),
+				      pinfo->num_domains);
+
 	pinfo->version = version;
 	handle->reset_ops = &reset_ops;
 	handle->reset_priv = pinfo;

drivers/firmware/arm_scmi/scmi_pm_domain.c

@@ -85,7 +85,10 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 	for (i = 0; i < num_domains; i++, scmi_pd++) {
 		u32 state;
 
-		domains[i] = &scmi_pd->genpd;
+		if (handle->power_ops->state_get(handle, i, &state)) {
+			dev_warn(dev, "failed to get state for domain %d\n", i);
+			continue;
+		}
 
 		scmi_pd->domain = i;
 		scmi_pd->handle = handle;
@@ -94,13 +97,10 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 		scmi_pd->genpd.power_off = scmi_pd_power_off;
 		scmi_pd->genpd.power_on = scmi_pd_power_on;
 
-		if (handle->power_ops->state_get(handle, i, &state)) {
-			dev_warn(dev, "failed to get state for domain %d\n", i);
-			continue;
-		}
-
 		pm_genpd_init(&scmi_pd->genpd, NULL,
 			      state == SCMI_POWER_STATE_GENERIC_OFF);
+
+		domains[i] = &scmi_pd->genpd;
 	}
 
 	scmi_pd_data->domains = domains;

drivers/firmware/arm_scmi/sensors.c

@@ -5,7 +5,12 @@
  * Copyright (C) 2018 ARM Ltd.
  */
 
+#define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt
+
+#include <linux/scmi_protocol.h>
+
 #include "common.h"
+#include "notify.h"
 
 enum scmi_sensor_protocol_cmd {
 	SENSOR_DESCRIPTION_GET = 0x3,
@@ -14,10 +19,6 @@ enum scmi_sensor_protocol_cmd {
 	SENSOR_READING_GET = 0x6,
 };
 
-enum scmi_sensor_protocol_notify {
-	SENSOR_TRIP_POINT_EVENT = 0x0,
-};
-
 struct scmi_msg_resp_sensor_attributes {
 	__le16 num_sensors;
 	u8 max_requests;
@@ -71,6 +72,12 @@ struct scmi_msg_sensor_reading_get {
 #define SENSOR_READ_ASYNC	BIT(0)
 };
 
+struct scmi_sensor_trip_notify_payld {
+	__le32 agent_id;
+	__le32 sensor_id;
+	__le32 trip_point_desc;
+};
+
 struct sensors_info {
 	u32 version;
 	int num_sensors;
@@ -271,11 +278,57 @@ static int scmi_sensor_count_get(const struct scmi_handle *handle)
 static struct scmi_sensor_ops sensor_ops = {
 	.count_get = scmi_sensor_count_get,
 	.info_get = scmi_sensor_info_get,
-	.trip_point_notify = scmi_sensor_trip_point_notify,
 	.trip_point_config = scmi_sensor_trip_point_config,
 	.reading_get = scmi_sensor_reading_get,
 };
 
+static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle,
+					  u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_sensor_trip_point_notify(handle, src_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_sensor_fill_custom_report(const struct scmi_handle *handle,
+					    u8 evt_id, ktime_t timestamp,
+					    const void *payld, size_t payld_sz,
+					    void *report, u32 *src_id)
+{
+	const struct scmi_sensor_trip_notify_payld *p = payld;
+	struct scmi_sensor_trip_point_report *r = report;
+
+	if (evt_id != SCMI_EVENT_SENSOR_TRIP_POINT_EVENT ||
+	    sizeof(*p) != payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->sensor_id = le32_to_cpu(p->sensor_id);
+	r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
+	*src_id = r->sensor_id;
+
+	return r;
+}
+
+static const struct scmi_event sensor_events[] = {
+	{
+		.id = SCMI_EVENT_SENSOR_TRIP_POINT_EVENT,
+		.max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld),
+		.max_report_sz = sizeof(struct scmi_sensor_trip_point_report),
+	},
+};
+
+static const struct scmi_event_ops sensor_event_ops = {
+	.set_notify_enabled = scmi_sensor_set_notify_enabled,
+	.fill_custom_report = scmi_sensor_fill_custom_report,
+};
+
 static int scmi_sensors_protocol_init(struct scmi_handle *handle)
 {
 	u32 version;
@@ -299,6 +352,12 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle)
 
 	scmi_sensor_description_get(handle, sinfo);
 
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_SENSOR, SCMI_PROTO_QUEUE_SZ,
+				      &sensor_event_ops, sensor_events,
+				      ARRAY_SIZE(sensor_events),
+				      sinfo->num_sensors);
+
 	sinfo->version = version;
 	handle->sensor_ops = &sensor_ops;
 	handle->sensor_priv = sinfo;

drivers/firmware/arm_scmi/smc.c

@@ -21,6 +21,7 @@
  *
  * @cinfo: SCMI channel info
  * @shmem: Transmit/Receive shared memory area
+ * @shmem_lock: Lock to protect access to Tx/Rx shared memory area
  * @func_id: smc/hvc call function id
  */
 

drivers/firmware/imx/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_IMX_DSP)		+= imx-dsp.o
-obj-$(CONFIG_IMX_SCU)		+= imx-scu.o misc.o imx-scu-irq.o
+obj-$(CONFIG_IMX_SCU)		+= imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o
 obj-$(CONFIG_IMX_SCU_PD)	+= scu-pd.o

drivers/firmware/imx/imx-scu-irq.c

@@ -10,6 +10,7 @@
 #include <linux/firmware/imx/ipc.h>
 #include <linux/firmware/imx/sci.h>
 #include <linux/mailbox_client.h>
+#include <linux/suspend.h>
 
 #define IMX_SC_IRQ_FUNC_ENABLE	1
 #define IMX_SC_IRQ_FUNC_STATUS	2
@@ -91,6 +92,7 @@ static void imx_scu_irq_work_handler(struct work_struct *work)
 		if (!irq_status)
 			continue;
 
+		pm_system_wakeup();
 		imx_scu_irq_notifier_call_chain(irq_status, &i);
 	}
 }

drivers/soc/imx/soc-imx-scu.c → drivers/firmware/imx/imx-scu-soc.c

@@ -10,9 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
-#define IMX_SCU_SOC_DRIVER_NAME		"imx-scu-soc"
-
-static struct imx_sc_ipc *soc_ipc_handle;
+static struct imx_sc_ipc *imx_sc_soc_ipc_handle;
 
 struct imx_sc_msg_misc_get_soc_id {
 	struct imx_sc_rpc_msg hdr;
@@ -44,7 +42,7 @@ static int imx_scu_soc_uid(u64 *soc_uid)
 	hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
 	hdr->size = 1;
 
-	ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
+	ret = imx_scu_call_rpc(imx_sc_soc_ipc_handle, &msg, true);
 	if (ret) {
 		pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
 		return ret;
@@ -71,7 +69,7 @@ static int imx_scu_soc_id(void)
 	msg.data.req.control = IMX_SC_C_ID;
 	msg.data.req.resource = IMX_SC_R_SYSTEM;
 
-	ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
+	ret = imx_scu_call_rpc(imx_sc_soc_ipc_handle, &msg, true);
 	if (ret) {
 		pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
 		return ret;
@@ -80,7 +78,7 @@ static int imx_scu_soc_id(void)
 	return msg.data.resp.id;
 }
 
-static int imx_scu_soc_probe(struct platform_device *pdev)
+int imx_scu_soc_init(struct device *dev)
 {
 	struct soc_device_attribute *soc_dev_attr;
 	struct soc_device *soc_dev;
@@ -88,11 +86,11 @@ static int imx_scu_soc_probe(struct platform_device *pdev)
 	u64 uid = 0;
 	u32 val;
 
-	ret = imx_scu_get_handle(&soc_ipc_handle);
+	ret = imx_scu_get_handle(&imx_sc_soc_ipc_handle);
 	if (ret)
 		return ret;
 
-	soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
+	soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr),
 				    GFP_KERNEL);
 	if (!soc_dev_attr)
 		return -ENOMEM;
@@ -115,73 +113,26 @@ static int imx_scu_soc_probe(struct platform_device *pdev)
 
 	/* format soc_id value passed from SCU firmware */
 	val = id & 0x1f;
-	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", val);
+	soc_dev_attr->soc_id = devm_kasprintf(dev, GFP_KERNEL, "0x%x", val);
 	if (!soc_dev_attr->soc_id)
 		return -ENOMEM;
 
 	/* format revision value passed from SCU firmware */
 	val = (id >> 5) & 0xf;
 	val = (((val >> 2) + 1) << 4) | (val & 0x3);
-	soc_dev_attr->revision = kasprintf(GFP_KERNEL,
-					   "%d.%d",
-					   (val >> 4) & 0xf,
-					   val & 0xf);
-	if (!soc_dev_attr->revision) {
-		ret = -ENOMEM;
-		goto free_soc_id;
-	}
+	soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
+						(val >> 4) & 0xf, val & 0xf);
+	if (!soc_dev_attr->revision)
+		return -ENOMEM;
 
-	soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", uid);
-	if (!soc_dev_attr->serial_number) {
-		ret = -ENOMEM;
-		goto free_revision;
-	}
+	soc_dev_attr->serial_number = devm_kasprintf(dev, GFP_KERNEL,
+						     "%016llX", uid);
+	if (!soc_dev_attr->serial_number)
+		return -ENOMEM;
 
 	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		ret = PTR_ERR(soc_dev);
-		goto free_serial_number;
-	}
+	if (IS_ERR(soc_dev))
+		return PTR_ERR(soc_dev);
 
 	return 0;
-
-free_serial_number:
-	kfree(soc_dev_attr->serial_number);
-free_revision:
-	kfree(soc_dev_attr->revision);
-free_soc_id:
-	kfree(soc_dev_attr->soc_id);
-	return ret;
-}
-
-static struct platform_driver imx_scu_soc_driver = {
-	.driver = {
-		.name = IMX_SCU_SOC_DRIVER_NAME,
-	},
-	.probe = imx_scu_soc_probe,
-};
-
-static int __init imx_scu_soc_init(void)
-{
-	struct platform_device *pdev;
-	struct device_node *np;
-	int ret;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
-	if (!np)
-		return -ENODEV;
-
-	of_node_put(np);
-
-	ret = platform_driver_register(&imx_scu_soc_driver);
-	if (ret)
-		return ret;
-
-	pdev = platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
-					       -1, NULL, 0);
-	if (IS_ERR(pdev))
-		platform_driver_unregister(&imx_scu_soc_driver);
-
-	return PTR_ERR_OR_ZERO(pdev);
 }
-device_initcall(imx_scu_soc_init);

drivers/firmware/imx/imx-scu.c

@@ -328,6 +328,10 @@ static int imx_scu_probe(struct platform_device *pdev)
 
 	imx_sc_ipc_handle = sc_ipc;
 
+	ret = imx_scu_soc_init(dev);
+	if (ret)
+		dev_warn(dev, "failed to initialize SoC info: %d\n", ret);
+
 	ret = imx_scu_enable_general_irq_channel(dev);
 	if (ret)
 		dev_warn(dev,

drivers/firmware/imx/rm.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ *
+ * File containing client-side RPC functions for the RM service. These
+ * function are ported to clients that communicate to the SC.
+ */
+
+#include <linux/firmware/imx/svc/rm.h>
+
+struct imx_sc_msg_rm_rsrc_owned {
+	struct imx_sc_rpc_msg hdr;
+	u16 resource;
+} __packed __aligned(4);
+
+/*
+ * This function check @resource is owned by current partition or not
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource the control is associated with
+ *
+ * @return Returns 0 for not owned and 1 for owned.
+ */
+bool imx_sc_rm_is_resource_owned(struct imx_sc_ipc *ipc, u16 resource)
+{
+	struct imx_sc_msg_rm_rsrc_owned msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_RM;
+	hdr->func = IMX_SC_RM_FUNC_IS_RESOURCE_OWNED;
+	hdr->size = 2;
+
+	msg.resource = resource;
+
+	/*
+	 * SCU firmware only returns value 0 or 1
+	 * for resource owned check which means not owned or owned.
+	 * So it is always successful.
+	 */
+	imx_scu_call_rpc(ipc, &msg, true);
+
+	return hdr->func;
+}
+EXPORT_SYMBOL(imx_sc_rm_is_resource_owned);

drivers/firmware/imx/scu-pd.c

@@ -167,8 +167,18 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
 	{ "dc0-pll", IMX_SC_R_DC_0_PLL_0, 2, true, 0 },
 
 	/* CM40 SS */
-	{ "cm40_i2c", IMX_SC_R_M4_0_I2C, 1, 0 },
-	{ "cm40_intmux", IMX_SC_R_M4_0_INTMUX, 1, 0 },
+	{ "cm40-i2c", IMX_SC_R_M4_0_I2C, 1, false, 0 },
+	{ "cm40-intmux", IMX_SC_R_M4_0_INTMUX, 1, false, 0 },
+	{ "cm40-pid", IMX_SC_R_M4_0_PID0, 5, true, 0},
+	{ "cm40-mu-a1", IMX_SC_R_M4_0_MU_1A, 1, false, 0},
+	{ "cm40-lpuart", IMX_SC_R_M4_0_UART, 1, false, 0},
+
+	/* CM41 SS */
+	{ "cm41-i2c", IMX_SC_R_M4_1_I2C, 1, false, 0 },
+	{ "cm41-intmux", IMX_SC_R_M4_1_INTMUX, 1, false, 0 },
+	{ "cm41-pid", IMX_SC_R_M4_1_PID0, 5, true, 0},
+	{ "cm41-mu-a1", IMX_SC_R_M4_1_MU_1A, 1, false, 0},
+	{ "cm41-lpuart", IMX_SC_R_M4_1_UART, 1, false, 0},
 };
 
 static const struct imx_sc_pd_soc imx8qxp_scu_pd = {

drivers/firmware/qcom_scm.c

@@ -391,7 +391,7 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
 
 	desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
 
-	return qcom_scm_call(__scm->dev, &desc, NULL);
+	return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
 }
 
 static void qcom_scm_set_download_mode(bool enable)
@@ -650,7 +650,7 @@ int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
 	int ret;
 
 
-	ret = qcom_scm_call(__scm->dev, &desc, &res);
+	ret = qcom_scm_call_atomic(__scm->dev, &desc, &res);
 	if (ret >= 0)
 		*val = res.result[0];
 
@@ -669,8 +669,7 @@ int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 
-
-	return qcom_scm_call(__scm->dev, &desc, NULL);
+	return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
 }
 EXPORT_SYMBOL(qcom_scm_io_writel);
 
@@ -1151,6 +1150,7 @@ static const struct of_device_id qcom_scm_dt_match[] = {
 							     SCM_HAS_IFACE_CLK |
 							     SCM_HAS_BUS_CLK)
 	},
+	{ .compatible = "qcom,scm-msm8994" },
 	{ .compatible = "qcom,scm-msm8996" },
 	{ .compatible = "qcom,scm" },
 	{}

drivers/firmware/smccc/Kconfig

@@ -14,3 +14,12 @@ config HAVE_ARM_SMCCC_DISCOVERY
 	 to add SMCCC discovery mechanism though the PSCI firmware
 	 implementation of PSCI_FEATURES(SMCCC_VERSION) which returns
 	 success on firmware compliant to SMCCC v1.1 and above.
+
+config ARM_SMCCC_SOC_ID
+	bool "SoC bus device for the ARM SMCCC SOC_ID"
+	depends on HAVE_ARM_SMCCC_DISCOVERY
+	default y
+	select SOC_BUS
+	help
+	  Include support for the SoC bus on the ARM SMCCC firmware based
+	  platforms providing some sysfs information about the SoC variant.

drivers/firmware/smccc/Makefile

 # SPDX-License-Identifier: GPL-2.0
 #
 obj-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY)	+= smccc.o
+obj-$(CONFIG_ARM_SMCCC_SOC_ID)	+= soc_id.o

drivers/firmware/smccc/soc_id.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Arm Limited
+ */
+
+#define pr_fmt(fmt) "SMCCC: SOC_ID: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#define SMCCC_SOC_ID_JEP106_BANK_IDX_MASK	GENMASK(30, 24)
+/*
+ * As per the SMC Calling Convention specification v1.2 (ARM DEN 0028C)
+ * Section 7.4 SMCCC_ARCH_SOC_ID bits[23:16] are JEP-106 identification
+ * code with parity bit for the SiP. We can drop the parity bit.
+ */
+#define SMCCC_SOC_ID_JEP106_ID_CODE_MASK	GENMASK(22, 16)
+#define SMCCC_SOC_ID_IMP_DEF_SOC_ID_MASK	GENMASK(15, 0)
+
+#define JEP106_BANK_CONT_CODE(x)	\
+	(u8)(FIELD_GET(SMCCC_SOC_ID_JEP106_BANK_IDX_MASK, (x)))
+#define JEP106_ID_CODE(x)	\
+	(u8)(FIELD_GET(SMCCC_SOC_ID_JEP106_ID_CODE_MASK, (x)))
+#define IMP_DEF_SOC_ID(x)	\
+	(u16)(FIELD_GET(SMCCC_SOC_ID_IMP_DEF_SOC_ID_MASK, (x)))
+
+static struct soc_device *soc_dev;
+static struct soc_device_attribute *soc_dev_attr;
+
+static int __init smccc_soc_init(void)
+{
+	struct arm_smccc_res res;
+	int soc_id_rev, soc_id_version;
+	static char soc_id_str[20], soc_id_rev_str[12];
+	static char soc_id_jep106_id_str[12];
+
+	if (arm_smccc_get_version() < ARM_SMCCC_VERSION_1_2)
+		return 0;
+
+	if (arm_smccc_1_1_get_conduit() == SMCCC_CONDUIT_NONE) {
+		pr_err("%s: invalid SMCCC conduit\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_SOC_ID, &res);
+
+	if (res.a0 == SMCCC_RET_NOT_SUPPORTED) {
+		pr_info("ARCH_SOC_ID not implemented, skipping ....\n");
+		return 0;
+	}
+
+	if ((int)res.a0 < 0) {
+		pr_info("ARCH_FEATURES(ARCH_SOC_ID) returned error: %lx\n",
+			res.a0);
+		return -EINVAL;
+	}
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_SOC_ID, 0, &res);
+	if ((int)res.a0 < 0) {
+		pr_err("ARCH_SOC_ID(0) returned error: %lx\n", res.a0);
+		return -EINVAL;
+	}
+
+	soc_id_version = res.a0;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_SOC_ID, 1, &res);
+	if ((int)res.a0 < 0) {
+		pr_err("ARCH_SOC_ID(1) returned error: %lx\n", res.a0);
+		return -EINVAL;
+	}
+
+	soc_id_rev = res.a0;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	sprintf(soc_id_rev_str, "0x%08x", soc_id_rev);
+	sprintf(soc_id_jep106_id_str, "jep106:%02x%02x",
+		JEP106_BANK_CONT_CODE(soc_id_version),
+		JEP106_ID_CODE(soc_id_version));
+	sprintf(soc_id_str, "%s:%04x", soc_id_jep106_id_str,
+		IMP_DEF_SOC_ID(soc_id_version));
+
+	soc_dev_attr->soc_id = soc_id_str;
+	soc_dev_attr->revision = soc_id_rev_str;
+	soc_dev_attr->family = soc_id_jep106_id_str;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	pr_info("ID = %s Revision = %s\n", soc_dev_attr->soc_id,
+		soc_dev_attr->revision);
+
+	return 0;
+}
+module_init(smccc_soc_init);
+
+static void __exit smccc_soc_exit(void)
+{
+	if (soc_dev)
+		soc_device_unregister(soc_dev);
+	kfree(soc_dev_attr);
+}
+module_exit(smccc_soc_exit);

drivers/firmware/tegra/bpmp.c

@@ -515,10 +515,10 @@ bool tegra_bpmp_mrq_is_supported(struct tegra_bpmp *bpmp, unsigned int mrq)
 			.size = sizeof(resp),
 		},
 	};
-	int ret;
+	int err;
 
-	ret = tegra_bpmp_transfer(bpmp, &msg);
-	if (ret || msg.rx.ret)
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err || msg.rx.ret)
 		return false;
 
 	return resp.status == 0;

drivers/firmware/ti_sci.c

@@ -2,7 +2,7 @@
 /*
  * Texas Instruments System Control Interface Protocol Driver
  *
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
  *	Nishanth Menon
  */
 

drivers/firmware/ti_sci.h

@@ -6,7 +6,7 @@
  * The system works in a message response protocol
  * See: http://processors.wiki.ti.com/index.php/TISCI for details
  *
- * Copyright (C)  2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C)  2015-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef __TI_SCI_H

drivers/firmware/turris-mox-rwtm.c

@@ -7,6 +7,7 @@
 
 #include <linux/armada-37xx-rwtm-mailbox.h>
 #include <linux/completion.h>
+#include <linux/debugfs.h>
 #include <linux/dma-mapping.h>
 #include <linux/hw_random.h>
 #include <linux/mailbox_client.h>
@@ -69,6 +70,18 @@ struct mox_rwtm {
 	/* public key burned in eFuse */
 	int has_pubkey;
 	u8 pubkey[135];
+
+#ifdef CONFIG_DEBUG_FS
+	/*
+	 * Signature process. This is currently done via debugfs, because it
+	 * does not conform to the sysfs standard "one file per attribute".
+	 * It should be rewritten via crypto API once akcipher API is available
+	 * from userspace.
+	 */
+	struct dentry *debugfs_root;
+	u32 last_sig[34];
+	int last_sig_done;
+#endif
 };
 
 struct mox_kobject {
@@ -279,6 +292,152 @@ static int mox_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait)
 	return ret;
 }
 
+#ifdef CONFIG_DEBUG_FS
+static int rwtm_debug_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t do_sign_read(struct file *file, char __user *buf, size_t len,
+			    loff_t *ppos)
+{
+	struct mox_rwtm *rwtm = file->private_data;
+	ssize_t ret;
+
+	/* only allow one read, of 136 bytes, from position 0 */
+	if (*ppos != 0)
+		return 0;
+
+	if (len < 136)
+		return -EINVAL;
+
+	if (!rwtm->last_sig_done)
+		return -ENODATA;
+
+	/* 2 arrays of 17 32-bit words are 136 bytes */
+	ret = simple_read_from_buffer(buf, len, ppos, rwtm->last_sig, 136);
+	rwtm->last_sig_done = 0;
+
+	return ret;
+}
+
+static ssize_t do_sign_write(struct file *file, const char __user *buf,
+			     size_t len, loff_t *ppos)
+{
+	struct mox_rwtm *rwtm = file->private_data;
+	struct armada_37xx_rwtm_rx_msg *reply = &rwtm->reply;
+	struct armada_37xx_rwtm_tx_msg msg;
+	loff_t dummy = 0;
+	ssize_t ret;
+
+	/* the input is a SHA-512 hash, so exactly 64 bytes have to be read */
+	if (len != 64)
+		return -EINVAL;
+
+	/* if last result is not zero user has not read that information yet */
+	if (rwtm->last_sig_done)
+		return -EBUSY;
+
+	if (!mutex_trylock(&rwtm->busy))
+		return -EBUSY;
+
+	/*
+	 * Here we have to send:
+	 *   1. Address of the input to sign.
+	 *      The input is an array of 17 32-bit words, the first (most
+	 *      significat) is 0, the rest 16 words are copied from the SHA-512
+	 *      hash given by the user and converted from BE to LE.
+	 *   2. Address of the buffer where ECDSA signature value R shall be
+	 *      stored by the rWTM firmware.
+	 *   3. Address of the buffer where ECDSA signature value S shall be
+	 *      stored by the rWTM firmware.
+	 */
+	memset(rwtm->buf, 0, 4);
+	ret = simple_write_to_buffer(rwtm->buf + 4, 64, &dummy, buf, len);
+	if (ret < 0)
+		goto unlock_mutex;
+	be32_to_cpu_array(rwtm->buf, rwtm->buf, 17);
+
+	msg.command = MBOX_CMD_SIGN;
+	msg.args[0] = 1;
+	msg.args[1] = rwtm->buf_phys;
+	msg.args[2] = rwtm->buf_phys + 68;
+	msg.args[3] = rwtm->buf_phys + 2 * 68;
+	ret = mbox_send_message(rwtm->mbox, &msg);
+	if (ret < 0)
+		goto unlock_mutex;
+
+	ret = wait_for_completion_interruptible(&rwtm->cmd_done);
+	if (ret < 0)
+		goto unlock_mutex;
+
+	ret = MBOX_STS_VALUE(reply->retval);
+	if (MBOX_STS_ERROR(reply->retval) != MBOX_STS_SUCCESS)
+		goto unlock_mutex;
+
+	/*
+	 * Here we read the R and S values of the ECDSA signature
+	 * computed by the rWTM firmware and convert their words from
+	 * LE to BE.
+	 */
+	memcpy(rwtm->last_sig, rwtm->buf + 68, 136);
+	cpu_to_be32_array(rwtm->last_sig, rwtm->last_sig, 34);
+	rwtm->last_sig_done = 1;
+
+	mutex_unlock(&rwtm->busy);
+	return len;
+unlock_mutex:
+	mutex_unlock(&rwtm->busy);
+	return ret;
+}
+
+static const struct file_operations do_sign_fops = {
+	.owner	= THIS_MODULE,
+	.open	= rwtm_debug_open,
+	.read	= do_sign_read,
+	.write	= do_sign_write,
+	.llseek	= no_llseek,
+};
+
+static int rwtm_register_debugfs(struct mox_rwtm *rwtm)
+{
+	struct dentry *root, *entry;
+
+	root = debugfs_create_dir("turris-mox-rwtm", NULL);
+
+	if (IS_ERR(root))
+		return PTR_ERR(root);
+
+	entry = debugfs_create_file_unsafe("do_sign", 0600, root, rwtm,
+					   &do_sign_fops);
+	if (IS_ERR(entry))
+		goto err_remove;
+
+	rwtm->debugfs_root = root;
+
+	return 0;
+err_remove:
+	debugfs_remove_recursive(root);
+	return PTR_ERR(entry);
+}
+
+static void rwtm_unregister_debugfs(struct mox_rwtm *rwtm)
+{
+	debugfs_remove_recursive(rwtm->debugfs_root);
+}
+#else
+static inline int rwtm_register_debugfs(struct mox_rwtm *rwtm)
+{
+	return 0;
+}
+
+static inline void rwtm_unregister_debugfs(struct mox_rwtm *rwtm)
+{
+}
+#endif
+
 static int turris_mox_rwtm_probe(struct platform_device *pdev)
 {
 	struct mox_rwtm *rwtm;
@@ -340,6 +499,12 @@ static int turris_mox_rwtm_probe(struct platform_device *pdev)
 		goto free_channel;
 	}
 
+	ret = rwtm_register_debugfs(rwtm);
+	if (ret < 0) {
+		dev_err(dev, "Failed creating debugfs entries: %i\n", ret);
+		goto free_channel;
+	}
+
 	return 0;
 
 free_channel:
@@ -355,6 +520,7 @@ static int turris_mox_rwtm_remove(struct platform_device *pdev)
 {
 	struct mox_rwtm *rwtm = platform_get_drvdata(pdev);
 
+	rwtm_unregister_debugfs(rwtm);
 	sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
 	kobject_put(rwtm_to_kobj(rwtm));
 	mbox_free_channel(rwtm->mbox);

drivers/gpu/drm/mediatek/mtk_drm_crtc.c

@@ -487,6 +487,7 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
 		cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
 		cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event);
 		mtk_crtc_ddp_config(crtc, cmdq_handle);
+		cmdq_pkt_finalize(cmdq_handle);
 		cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle);
 	}
 #endif

drivers/i2c/busses/i2c-qcom-geni.c

@@ -559,6 +559,22 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	gi2c->adap.dev.of_node = dev->of_node;
 	strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
+	ret = geni_icc_get(&gi2c->se, "qup-memory");
+	if (ret)
+		return ret;
+	/*
+	 * Set the bus quota for core and cpu to a reasonable value for
+	 * register access.
+	 * Set quota for DDR based on bus speed.
+	 */
+	gi2c->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
+	gi2c->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
+	gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
+
+	ret = geni_icc_set_bw(&gi2c->se);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning on resources %d\n", ret);
@@ -581,6 +597,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = geni_icc_disable(&gi2c->se);
+	if (ret)
+		return ret;
+
 	dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 
 	gi2c->suspended = 1;
@@ -625,7 +645,7 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 		gi2c->suspended = 1;
 	}
 
-	return 0;
+	return geni_icc_disable(&gi2c->se);
 }
 
 static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
@@ -633,6 +653,10 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
 	int ret;
 	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
 
+	ret = geni_icc_enable(&gi2c->se);
+	if (ret)
+		return ret;
+
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret)
 		return ret;

drivers/interconnect/qcom/bcm-voter.c

@@ -266,11 +266,7 @@ int qcom_icc_bcm_voter_commit(struct bcm_voter *voter)
 	if (!commit_idx[0])
 		goto out;
 
-	ret = rpmh_invalidate(voter->dev);
-	if (ret) {
-		pr_err("Error invalidating RPMH client (%d)\n", ret);
-		goto out;
-	}
+	rpmh_invalidate(voter->dev);
 
 	ret = rpmh_write_batch(voter->dev, RPMH_ACTIVE_ONLY_STATE,
 			       cmds, commit_idx);

drivers/irqchip/irq-ti-sci-inta.c

@@ -2,7 +2,7 @@
 /*
  * Texas Instruments' K3 Interrupt Aggregator irqchip driver
  *
- * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2019 Texas Instruments Incorporated - https://www.ti.com/
  *	Lokesh Vutla <lokeshvutla@ti.com>
  */
 

drivers/irqchip/irq-ti-sci-intr.c

@@ -2,7 +2,7 @@
 /*
  * Texas Instruments' K3 Interrupt Router irqchip driver
  *
- * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2019 Texas Instruments Incorporated - https://www.ti.com/
  *	Lokesh Vutla <lokeshvutla@ti.com>
  */
 

drivers/memory/Kconfig

@@ -5,6 +5,12 @@
 
 menuconfig MEMORY
 	bool "Memory Controller drivers"
+	help
+	  This option allows to enable specific memory controller drivers,
+	  useful mostly on embedded systems.  These could be controllers
+	  for DRAM (SDR, DDR), ROM, SRAM and others.  The drivers features
+	  vary from memory tuning and frequency scaling to enabling
+	  access to attached peripherals through memory bus.
 
 if MEMORY
 

drivers/memory/brcmstb_dpfe.c

@@ -23,7 +23,7 @@
  *     - BE kernel + LE firmware image
  *     - BE kernel + BE firmware image
  *
- * The DPCU always runs in big endian mode. The firwmare image, however, can
+ * The DPCU always runs in big endian mode. The firmware image, however, can
  * be in either format. Also, communication between host CPU and DCPU is
  * always in little endian.
  */
@@ -188,7 +188,7 @@ struct brcmstb_dpfe_priv {
 	struct mutex lock;
 };
 
-static const char *error_text[] = {
+static const char * const error_text[] = {
 	"Success", "Header code incorrect", "Unknown command or argument",
 	"Incorrect checksum", "Malformed command", "Timed out",
 };
@@ -379,9 +379,8 @@ static void __iomem *get_msg_ptr(struct brcmstb_dpfe_priv *priv, u32 response,
 	void __iomem *ptr = NULL;
 
 	/* There is no need to use this function for API v3 or later. */
-	if (unlikely(priv->dpfe_api->version >= 3)) {
+	if (unlikely(priv->dpfe_api->version >= 3))
 		return NULL;
-	}
 
 	msg_type = (response >> DRAM_MSG_TYPE_OFFSET) & DRAM_MSG_TYPE_MASK;
 	offset = (response >> DRAM_MSG_ADDR_OFFSET) & DRAM_MSG_ADDR_MASK;

drivers/memory/bt1-l2-ctl.c

@@ -66,6 +66,7 @@ struct l2_ctl_device_attribute {
 	struct device_attribute dev_attr;
 	enum l2_ctl_stall id;
 };
+
 #define to_l2_ctl_dev_attr(_dev_attr) \
 	container_of(_dev_attr, struct l2_ctl_device_attribute, dev_attr)
 
@@ -242,6 +243,7 @@ static ssize_t l2_ctl_latency_store(struct device *dev,
 
 	return count;
 }
+
 static L2_CTL_ATTR_RW(l2_ws_latency, l2_ctl_latency, L2_WS_STALL);
 static L2_CTL_ATTR_RW(l2_tag_latency, l2_ctl_latency, L2_TAG_STALL);
 static L2_CTL_ATTR_RW(l2_data_latency, l2_ctl_latency, L2_DATA_STALL);

drivers/memory/da8xx-ddrctl.c

@@ -102,14 +102,12 @@ static int da8xx_ddrctl_probe(struct platform_device *pdev)
 {
 	const struct da8xx_ddrctl_config_knob *knob;
 	const struct da8xx_ddrctl_setting *setting;
-	struct device_node *node;
 	struct resource *res;
 	void __iomem *ddrctl;
 	struct device *dev;
 	u32 reg;
 
 	dev = &pdev->dev;
-	node = dev->of_node;
 
 	setting = da8xx_ddrctl_get_board_settings();
 	if (!setting) {

drivers/memory/emif-asm-offsets.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * TI AM33XX EMIF PM Assembly Offsets
  *
  * Copyright (C) 2016-2017 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/ti-emif-sram.h>
 

drivers/memory/emif.c

@@ -282,10 +282,9 @@ static void set_lpmode(struct emif_data *emif, u8 lpmode)
 	 * the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4.
 	 */
 	if ((emif->plat_data->ip_rev == EMIF_4D) &&
-	    (EMIF_LP_MODE_PWR_DN == lpmode)) {
+	    (lpmode == EMIF_LP_MODE_PWR_DN)) {
 		WARN_ONCE(1,
-			  "REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by"
-			  "erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n");
+			  "REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n");
 		/* rollback LP_MODE to Self-refresh mode */
 		lpmode = EMIF_LP_MODE_SELF_REFRESH;
 	}
@@ -714,7 +713,7 @@ static u32 get_ext_phy_ctrl_2_intelliphy_4d5(void)
 	u32 fifo_we_slave_ratio;
 
 	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
-		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
 
 	return fifo_we_slave_ratio | fifo_we_slave_ratio << 11 |
 		fifo_we_slave_ratio << 22;
@@ -725,7 +724,7 @@ static u32 get_ext_phy_ctrl_3_intelliphy_4d5(void)
 	u32 fifo_we_slave_ratio;
 
 	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
-		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
 
 	return fifo_we_slave_ratio >> 10 | fifo_we_slave_ratio << 1 |
 		fifo_we_slave_ratio << 12 | fifo_we_slave_ratio << 23;
@@ -736,7 +735,7 @@ static u32 get_ext_phy_ctrl_4_intelliphy_4d5(void)
 	u32 fifo_we_slave_ratio;
 
 	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
-		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
 
 	return fifo_we_slave_ratio >> 9 | fifo_we_slave_ratio << 2 |
 		fifo_we_slave_ratio << 13;
@@ -975,8 +974,7 @@ static irqreturn_t handle_temp_alert(void __iomem *base, struct emif_data *emif)
 				EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART)) {
 		if (emif->temperature_level >= SDRAM_TEMP_HIGH_DERATE_REFRESH) {
 			dev_err(emif->dev,
-				"%s:NOT Extended temperature capable memory."
-				"Converting MR4=0x%02x as shutdown event\n",
+				"%s:NOT Extended temperature capable memory. Converting MR4=0x%02x as shutdown event\n",
 				__func__, emif->temperature_level);
 			/*
 			 * Temperature far too high - do kernel_power_off()
@@ -1318,9 +1316,9 @@ static void __init_or_module of_get_ddr_info(struct device_node *np_emif,
 	if (of_find_property(np_emif, "cal-resistor-per-cs", &len))
 		dev_info->cal_resistors_per_cs = true;
 
-	if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s4"))
+	if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s4"))
 		dev_info->type = DDR_TYPE_LPDDR2_S4;
-	else if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s2"))
+	else if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s2"))
 		dev_info->type = DDR_TYPE_LPDDR2_S2;
 
 	of_property_read_u32(np_ddr, "density", &density);
@@ -1563,11 +1561,8 @@ static int __init_or_module emif_probe(struct platform_device *pdev)
 		goto error;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(emif->dev, "%s: error getting IRQ resource - %d\n",
-			__func__, irq);
+	if (irq < 0)
 		goto error;
-	}
 
 	emif_onetime_settings(emif);
 	emif_debugfs_init(emif);

drivers/memory/fsl_ifc.c

@@ -53,6 +53,7 @@ int fsl_ifc_find(phys_addr_t addr_base)
 
 	for (i = 0; i < fsl_ifc_ctrl_dev->banks; i++) {
 		u32 cspr = ifc_in32(&fsl_ifc_ctrl_dev->gregs->cspr_cs[i].cspr);
+
 		if (cspr & CSPR_V && (cspr & CSPR_BA) ==
 				convert_ifc_address(addr_base))
 			return i;
@@ -153,8 +154,8 @@ static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
 	/* read for chip select error */
 	cs_err = ifc_in32(&ifc->cm_evter_stat);
 	if (cs_err) {
-		dev_err(ctrl->dev, "transaction sent to IFC is not mapped to"
-				"any memory bank 0x%08X\n", cs_err);
+		dev_err(ctrl->dev, "transaction sent to IFC is not mapped to any memory bank 0x%08X\n",
+			cs_err);
 		/* clear the chip select error */
 		ifc_out32(IFC_CM_EVTER_STAT_CSER, &ifc->cm_evter_stat);
 
@@ -163,24 +164,24 @@ static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
 		err_addr = ifc_in32(&ifc->cm_erattr1);
 
 		if (status & IFC_CM_ERATTR0_ERTYP_READ)
-			dev_err(ctrl->dev, "Read transaction error"
-				"CM_ERATTR0 0x%08X\n", status);
+			dev_err(ctrl->dev, "Read transaction error CM_ERATTR0 0x%08X\n",
+				status);
 		else
-			dev_err(ctrl->dev, "Write transaction error"
-				"CM_ERATTR0 0x%08X\n", status);
+			dev_err(ctrl->dev, "Write transaction error CM_ERATTR0 0x%08X\n",
+				status);
 
 		err_axiid = (status & IFC_CM_ERATTR0_ERAID) >>
 					IFC_CM_ERATTR0_ERAID_SHIFT;
-		dev_err(ctrl->dev, "AXI ID of the error"
-					"transaction 0x%08X\n", err_axiid);
+		dev_err(ctrl->dev, "AXI ID of the error transaction 0x%08X\n",
+			err_axiid);
 
 		err_srcid = (status & IFC_CM_ERATTR0_ESRCID) >>
 					IFC_CM_ERATTR0_ESRCID_SHIFT;
-		dev_err(ctrl->dev, "SRC ID of the error"
-					"transaction 0x%08X\n", err_srcid);
+		dev_err(ctrl->dev, "SRC ID of the error transaction 0x%08X\n",
+			err_srcid);
 
-		dev_err(ctrl->dev, "Transaction Address corresponding to error"
-					"ERADDR 0x%08X\n", err_addr);
+		dev_err(ctrl->dev, "Transaction Address corresponding to error ERADDR 0x%08X\n",
+			err_addr);
 
 		ret = IRQ_HANDLED;
 	}
@@ -199,7 +200,7 @@ static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
  * the resources needed for the controller only.  The
  * resources for the NAND banks themselves are allocated
  * in the chip probe function.
-*/
+ */
 static int fsl_ifc_ctrl_probe(struct platform_device *dev)
 {
 	int ret = 0;
@@ -250,8 +251,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
 	/* get the Controller level irq */
 	fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
 	if (fsl_ifc_ctrl_dev->irq == 0) {
-		dev_err(&dev->dev, "failed to get irq resource "
-							"for IFC\n");
+		dev_err(&dev->dev, "failed to get irq resource for IFC\n");
 		ret = -ENODEV;
 		goto err;
 	}

drivers/memory/jz4780-nemc.c

@@ -8,6 +8,7 @@
 
 #include <linux/clk.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/math64.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -22,6 +23,8 @@
 #define NEMC_SMCRn(n)		(0x14 + (((n) - 1) * 4))
 #define NEMC_NFCSR		0x50
 
+#define NEMC_REG_LEN		0x54
+
 #define NEMC_SMCR_SMT		BIT(0)
 #define NEMC_SMCR_BW_SHIFT	6
 #define NEMC_SMCR_BW_MASK	(0x3 << NEMC_SMCR_BW_SHIFT)
@@ -288,7 +291,19 @@ static int jz4780_nemc_probe(struct platform_device *pdev)
 	nemc->dev = dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	nemc->base = devm_ioremap_resource(dev, res);
+
+	/*
+	 * The driver currently only uses the registers up to offset
+	 * NEMC_REG_LEN. Since the EFUSE registers are in the middle of the
+	 * NEMC registers, we only request the registers we will use for now;
+	 * that way the EFUSE driver can probe too.
+	 */
+	if (!devm_request_mem_region(dev, res->start, NEMC_REG_LEN, dev_name(dev))) {
+		dev_err(dev, "unable to request I/O memory region\n");
+		return -EBUSY;
+	}
+
+	nemc->base = devm_ioremap(dev, res->start, NEMC_REG_LEN);
 	if (IS_ERR(nemc->base)) {
 		dev_err(dev, "failed to get I/O memory\n");
 		return PTR_ERR(nemc->base);

drivers/memory/mtk-smi.c

@@ -60,7 +60,7 @@ struct mtk_smi_common_plat {
 
 struct mtk_smi_larb_gen {
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
-	void (*config_port)(struct device *);
+	void (*config_port)(struct device *dev);
 	unsigned int			larb_direct_to_common_mask;
 	bool				has_gals;
 };

drivers/memory/of_memory.h

@@ -3,22 +3,23 @@
  * OpenFirmware helpers for memory drivers
  *
  * Copyright (C) 2012 Texas Instruments, Inc.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
  */
 
 #ifndef __LINUX_MEMORY_OF_REG_H
 #define __LINUX_MEMORY_OF_REG_H
 
 #if defined(CONFIG_OF) && defined(CONFIG_DDR)
-extern const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np,
-		struct device *dev);
-extern const struct lpddr2_timings
-	*of_get_ddr_timings(struct device_node *np_ddr, struct device *dev,
-	u32 device_type, u32 *nr_frequencies);
-extern const struct lpddr3_min_tck
-	*of_lpddr3_get_min_tck(struct device_node *np, struct device *dev);
-extern const struct lpddr3_timings
-	*of_lpddr3_get_ddr_timings(struct device_node *np_ddr,
-	struct device *dev, u32 device_type, u32 *nr_frequencies);
+const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np,
+					    struct device *dev);
+const struct lpddr2_timings *of_get_ddr_timings(struct device_node *np_ddr,
+						struct device *dev,
+						u32 device_type, u32 *nr_frequencies);
+const struct lpddr3_min_tck *of_lpddr3_get_min_tck(struct device_node *np,
+						   struct device *dev);
+const struct lpddr3_timings *
+of_lpddr3_get_ddr_timings(struct device_node *np_ddr,
+			  struct device *dev, u32 device_type, u32 *nr_frequencies);
 #else
 static inline const struct lpddr2_min_tck
 	*of_get_min_tck(struct device_node *np, struct device *dev)

drivers/memory/tegra/mc.h

@@ -34,6 +34,7 @@
 #define MC_EMEM_ARB_TIMING_W2W				0xbc
 #define MC_EMEM_ARB_TIMING_R2W				0xc0
 #define MC_EMEM_ARB_TIMING_W2R				0xc4
+#define MC_EMEM_ARB_MISC2				0xc8
 #define MC_EMEM_ARB_DA_TURNS				0xd0
 #define MC_EMEM_ARB_DA_COVERS				0xd4
 #define MC_EMEM_ARB_MISC0				0xd8