Merge mulgrave.(none):/home/jejb/BK/scsi-dma-mask-2.5

into mulgrave.(none):/home/jejb/BK/mca-sysfs-new-2.5

arch/i386/kernel/mca.c

@@ -54,54 +54,7 @@
 #include <linux/init.h>
 #include <asm/arch_hooks.h>
 
-/* This structure holds MCA information. Each (plug-in) adapter has
- * eight POS registers. Then the machine may have integrated video and
- * SCSI subsystems, which also have eight POS registers.
- * Finally, the motherboard (planar) has got POS-registers.
- * Other miscellaneous information follows.
- */
-
-typedef enum {
-	MCA_ADAPTER_NORMAL = 0,
-	MCA_ADAPTER_NONE = 1,
-	MCA_ADAPTER_DISABLED = 2,
-	MCA_ADAPTER_ERROR = 3
-} MCA_AdapterStatus;
-
-struct MCA_adapter {
-	MCA_AdapterStatus status;	/* is there a valid adapter? */
-	int id;				/* adapter id value */
-	unsigned char pos[8];		/* POS registers */
-	int driver_loaded;		/* is there a driver installed? */
-					/* 0 - No, 1 - Yes */
-	char name[48];			/* adapter-name provided by driver */
-	char procname[8];		/* name of /proc/mca file */
-	MCA_ProcFn procfn;		/* /proc info callback */
-	void* dev;			/* device/context info for callback */
-};
-
-struct MCA_info {
-	/* one for each of the 8 possible slots, plus one for integrated SCSI
-	 * and one for integrated video.
-	 */
-
-	struct MCA_adapter slot[MCA_NUMADAPTERS];
-
-	/* two potential addresses for integrated SCSI adapter - this will
-	 * track which one we think it is.
-	 */
-
-	unsigned char which_scsi;
-};
-
-/* The mca_info structure pointer. If MCA bus is present, the function
- * mca_probe() is invoked. The function puts motherboard, then all
- * adapters into setup mode, allocates and fills an MCA_info structure,
- * and points this pointer to the structure. Otherwise the pointer
- * is set to zero.
- */
-
-static struct MCA_info* mca_info = NULL;
+static unsigned char which_scsi = 0;
 
 /*
  * Motherboard register spinlock. Untested on SMP at the moment, but
@@ -109,33 +62,17 @@ static struct MCA_info* mca_info = NULL;
  *
  * Yes - Alan
  */
-static spinlock_t mca_lock = SPIN_LOCK_UNLOCKED;
-
-/* MCA registers */
-
-#define MCA_MOTHERBOARD_SETUP_REG	0x94
-#define MCA_ADAPTER_SETUP_REG		0x96
-#define MCA_POS_REG(n)			(0x100+(n))
-
-#define MCA_ENABLED	0x01	/* POS 2, set if adapter enabled */
-
-/*--------------------------------------------------------------------*/
-
-#ifdef CONFIG_PROC_FS
-static void mca_do_proc_init(void);
-#endif
-
-/*--------------------------------------------------------------------*/
+spinlock_t mca_lock = SPIN_LOCK_UNLOCKED;
 
 /* Build the status info for the adapter */
 
-static void mca_configure_adapter_status(int slot) {
-	mca_info->slot[slot].status = MCA_ADAPTER_NONE;
+static void mca_configure_adapter_status(struct mca_device *mca_dev) {
+	mca_dev->status = MCA_ADAPTER_NONE;
 
-	mca_info->slot[slot].id = mca_info->slot[slot].pos[0]
-		+ (mca_info->slot[slot].pos[1] << 8);
+	mca_dev->pos_id = mca_dev->pos[0]
+		+ (mca_dev->pos[1] << 8);
 
-	if(!mca_info->slot[slot].id && slot < MCA_MAX_SLOT_NR) {
+	if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
 
 		/* id = 0x0000 usually indicates hardware failure,
 		 * however, ZP Gu (zpg@castle.net> reports that his 9556
@@ -145,10 +82,10 @@ static void mca_configure_adapter_status(int slot) {
 		 * however, this code will stay.
 		 */
 
-		mca_info->slot[slot].status = MCA_ADAPTER_ERROR;
+		mca_dev->status = MCA_ADAPTER_ERROR;
 
 		return;
-	} else if(mca_info->slot[slot].id != 0xffff) {
+	} else if(mca_dev->pos_id != 0xffff) {
 
 		/* 0xffff usually indicates that there's no adapter,
 		 * however, some integrated adapters may have 0xffff as
@@ -157,26 +94,26 @@ static void mca_configure_adapter_status(int slot) {
 		 * and possibly also the 95 ULTIMEDIA.
 		 */
 
-		mca_info->slot[slot].status = MCA_ADAPTER_NORMAL;
+		mca_dev->status = MCA_ADAPTER_NORMAL;
 	}
 
-	if((mca_info->slot[slot].id == 0xffff ||
-	   mca_info->slot[slot].id == 0x0000) && slot >= MCA_MAX_SLOT_NR) {
+	if((mca_dev->pos_id == 0xffff ||
+	    mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
 		int j;
 
 		for(j = 2; j < 8; j++) {
-			if(mca_info->slot[slot].pos[j] != 0xff) {
-				mca_info->slot[slot].status = MCA_ADAPTER_NORMAL;
+			if(mca_dev->pos[j] != 0xff) {
+				mca_dev->status = MCA_ADAPTER_NORMAL;
 				break;
 			}
 		}
 	}
 
-	if(!(mca_info->slot[slot].pos[2] & MCA_ENABLED)) {
+	if(!(mca_dev->pos[2] & MCA_ENABLED)) {
 
 		/* enabled bit is in POS 2 */
 
-		mca_info->slot[slot].status = MCA_ADAPTER_DISABLED;
+		mca_dev->status = MCA_ADAPTER_DISABLED;
 	}
 } /* mca_configure_adapter_status */
 
@@ -194,9 +131,121 @@ struct resource mca_standard_resources[] = {
 
 #define MCA_STANDARD_RESOURCES	(sizeof(mca_standard_resources)/sizeof(struct resource))
 
-int __init mca_init(void)
+/**
+ *	mca_read_pos - read the POS registers into a memory buffer
+ *
+ *	Returns 1 if a card actually exists (i.e. the pos isn't
+ *	all 0xff) or 0 otherwise
+ */
+static int mca_read_and_store_pos(unsigned char *pos) {
+	int j;
+	int found = 0;
+
+	for(j=0; j<8; j++) {
+		if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) {
+			/* 0xff all across means no device. 0x00 means
+			 * something's broken, but a device is
+			 * probably there.  However, if you get 0x00
+			 * from a motherboard register it won't matter
+			 * what we find.  For the record, on the
+			 * 57SLC, the integrated SCSI adapter has
+			 * 0xffff for the adapter ID, but nonzero for
+			 * other registers.  */
+
+			found = 1;
+		}
+	}
+	return found;
+}
+
+static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
+{
+	unsigned char byte;
+	unsigned long flags;
+
+	if(reg < 0 || reg >= 8)
+		return 0;
+
+	spin_lock_irqsave(&mca_lock, flags);
+	if(mca_dev->pos_register) {
+		/* Disable adapter setup, enable motherboard setup */
+
+		outb_p(0, MCA_ADAPTER_SETUP_REG);
+		outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+
+		byte = inb_p(MCA_POS_REG(reg));
+		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+	} else {
+
+		/* Make sure motherboard setup is off */
+
+		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+		/* Read the appropriate register */
+
+		outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG);
+		byte = inb_p(MCA_POS_REG(reg));
+		outb_p(0, MCA_ADAPTER_SETUP_REG);
+	}
+	spin_unlock_irqrestore(&mca_lock, flags);
+
+	mca_dev->pos[reg] = byte;
+
+	return byte;
+}
+
+static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
+			     unsigned char byte)
+{
+	unsigned long flags;
+
+	if(reg < 0 || reg >= 8)
+		return;
+
+	spin_lock_irqsave(&mca_lock, flags);
+
+	/* Make sure motherboard setup is off */
+
+	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+	/* Read in the appropriate register */
+
+	outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG);
+	outb_p(byte, MCA_POS_REG(reg));
+	outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+	spin_unlock_irqrestore(&mca_lock, flags);
+
+	/* Update the global register list, while we have the byte */
+
+	mca_dev->pos[reg] = byte;
+
+}
+
+/* for the primary MCA bus, we have identity transforms */
+static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq)
+{
+	return irq;
+}
+
+static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port)
+{
+	return port;
+}
+
+static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem)
+{
+	return mem;
+}
+
+
+static int __init mca_init(void)
 {
 	unsigned int i, j;
+	struct mca_device *mca_dev;
+	unsigned char pos[8];
+	short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
+	struct mca_bus *bus;
 
 	/* WARNING: Be careful when making changes here. Putting an adapter
 	 * and the motherboard simultaneously into setup mode may result in
@@ -209,17 +258,28 @@ int __init mca_init(void)
 
 	if(!MCA_bus)
 		return -ENODEV;
-	printk(KERN_INFO "Micro Channel bus detected.\n");
 
-	/* Allocate MCA_info structure (at address divisible by 8) */
-
-	mca_info = (struct MCA_info *)kmalloc(sizeof(struct MCA_info), GFP_KERNEL);
+	printk(KERN_INFO "Micro Channel bus detected.\n");
 
-	if(mca_info == NULL) {
-		printk(KERN_ERR "Failed to allocate memory for mca_info!");
-		return -ENOMEM;
+	if(mca_system_init()) {
+		printk(KERN_ERR "MCA bus system initialisation failed\n");
+		return -ENODEV;
 	}
-	memset(mca_info, 0, sizeof(struct MCA_info));
+
+	/* All MCA systems have at least a primary bus */
+	bus = mca_attach_bus(MCA_PRIMARY_BUS);
+	bus->default_dma_mask = 0xffffffffLL;
+	bus->f.mca_write_pos = mca_pc_write_pos;
+	bus->f.mca_read_pos = mca_pc_read_pos;
+	bus->f.mca_transform_irq = mca_dummy_transform_irq;
+	bus->f.mca_transform_ioport = mca_dummy_transform_ioport;
+	bus->f.mca_transform_memory = mca_dummy_transform_memory;
+
+	/* get the motherboard device */
+	mca_dev = kmalloc(sizeof(struct mca_device), GFP_KERNEL);
+	if(unlikely(!mca_dev))
+		goto out_nomem;
+	memset(mca_dev, 0, sizeof(struct mca_device));
 
 	/*
 	 * We do not expect many MCA interrupts during initialization,
@@ -233,23 +293,35 @@ int __init mca_init(void)
 
 	/* Read motherboard POS registers */
 
-	outb_p(0x7f, MCA_MOTHERBOARD_SETUP_REG);
-	mca_info->slot[MCA_MOTHERBOARD].name[0] = 0;
-	for(j=0; j<8; j++) {
-		mca_info->slot[MCA_MOTHERBOARD].pos[j] = inb_p(MCA_POS_REG(j));
-	}
-	mca_configure_adapter_status(MCA_MOTHERBOARD);
+	mca_dev->pos_register = 0x7f;
+	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+	mca_dev->dev.name[0] = 0;
+	mca_read_and_store_pos(mca_dev->pos);
+	mca_configure_adapter_status(mca_dev);
+	/* fake POS and slot for a motherboard */
+	mca_dev->pos_id = MCA_MOTHERBOARD_POS;
+	mca_dev->slot = MCA_MOTHERBOARD;
+	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+
+	mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+	if(unlikely(!mca_dev))
+		goto out_unlock_nomem;
+	memset(mca_dev, 0, sizeof(struct mca_device));
+
 
 	/* Put motherboard into video setup mode, read integrated video
 	 * POS registers, and turn motherboard setup off.
 	 */
 
-	outb_p(0xdf, MCA_MOTHERBOARD_SETUP_REG);
-	mca_info->slot[MCA_INTEGVIDEO].name[0] = 0;
-	for(j=0; j<8; j++) {
-		mca_info->slot[MCA_INTEGVIDEO].pos[j] = inb_p(MCA_POS_REG(j));
-	}
-	mca_configure_adapter_status(MCA_INTEGVIDEO);
+	mca_dev->pos_register = 0xdf;
+	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+	mca_dev->dev.name[0] = 0;
+	mca_read_and_store_pos(mca_dev->pos);
+	mca_configure_adapter_status(mca_dev);
+	/* fake POS and slot for the integrated video */
+	mca_dev->pos_id = MCA_INTEGVIDEO_POS;
+	mca_dev->slot = MCA_INTEGVIDEO;
+	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
 
 	/* Put motherboard into scsi setup mode, read integrated scsi
 	 * POS registers, and turn motherboard setup off.
@@ -263,33 +335,28 @@ int __init mca_init(void)
 	 * machine.
 	 */
 
-	outb_p(0xf7, MCA_MOTHERBOARD_SETUP_REG);
-	mca_info->slot[MCA_INTEGSCSI].name[0] = 0;
-	for(j=0; j<8; j++) {
-		if((mca_info->slot[MCA_INTEGSCSI].pos[j] = inb_p(MCA_POS_REG(j))) != 0xff)
-		{
-			/* 0xff all across means no device. 0x00 means
-			 * something's broken, but a device is probably there.
-			 * However, if you get 0x00 from a motherboard
-			 * register it won't matter what we find.  For the
-			 * record, on the 57SLC, the integrated SCSI
-			 * adapter has 0xffff for the adapter ID, but
-			 * nonzero for other registers.
-			 */
-
-			mca_info->which_scsi = 0xf7;
-		}
+	for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
+		outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
+		if(mca_read_and_store_pos(pos))
+			break;
 	}
-	if(!mca_info->which_scsi) {
-
-		/* Didn't find it at 0xf7, try somewhere else... */
-		mca_info->which_scsi = 0xfd;
-
-		outb_p(0xfd, MCA_MOTHERBOARD_SETUP_REG);
-		for(j=0; j<8; j++)
-			mca_info->slot[MCA_INTEGSCSI].pos[j] = inb_p(MCA_POS_REG(j));
+	if(which_scsi) {
+		/* found a scsi card */
+		mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+		if(unlikely(!mca_dev))
+			goto out_unlock_nomem;
+		memset(mca_dev, 0, sizeof(struct mca_device));
+
+		for(j = 0; j < 8; j++)
+			mca_dev->pos[j] = pos[j];
+
+		mca_configure_adapter_status(mca_dev);
+		/* fake POS and slot for integrated SCSI controller */
+		mca_dev->pos_id = MCA_INTEGSCSI_POS;
+		mca_dev->slot = MCA_INTEGSCSI;
+		mca_dev->pos_register = which_scsi;
+		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
 	}
-	mca_configure_adapter_status(MCA_INTEGSCSI);
 
 	/* Turn off motherboard setup */
 
@@ -301,12 +368,22 @@ int __init mca_init(void)
 
 	for(i=0; i<MCA_MAX_SLOT_NR; i++) {
 		outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
-		for(j=0; j<8; j++) {
-			mca_info->slot[i].pos[j]=inb_p(MCA_POS_REG(j));
-		}
-		mca_info->slot[i].name[0] = 0;
-		mca_info->slot[i].driver_loaded = 0;
-		mca_configure_adapter_status(i);
+		if(!mca_read_and_store_pos(pos))
+			continue;
+
+		mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+		if(unlikely(!mca_dev))
+			goto out_unlock_nomem;
+		memset(mca_dev, 0, sizeof(struct mca_device));
+
+		for(j=0; j<8; j++)
+			mca_dev->pos[j]=pos[j];
+
+		mca_dev->driver_loaded = 0;
+		mca_dev->slot = i;
+		mca_dev->pos_register = 0;
+		mca_configure_adapter_status(mca_dev);
+		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
 	}
 	outb_p(0, MCA_ADAPTER_SETUP_REG);
 
@@ -316,11 +393,15 @@ int __init mca_init(void)
 	for (i = 0; i < MCA_STANDARD_RESOURCES; i++)
 		request_resource(&ioport_resource, mca_standard_resources + i);
 
-#ifdef CONFIG_PROC_FS
 	mca_do_proc_init();
-#endif
 
 	return 0;
+
+ out_unlock_nomem:
+	spin_unlock_irq(&mca_lock);
+ out_nomem:
+	printk(KERN_EMERG "Failed memory allocation in MCA setup!\n");
+	return -ENOMEM;
 }
 
 subsys_initcall(mca_init);
@@ -329,18 +410,22 @@ subsys_initcall(mca_init);
 
 static void mca_handle_nmi_slot(int slot, int check_flag)
 {
-	if(slot < MCA_MAX_SLOT_NR) {
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev) {
+		printk(KERN_CRIT "NMI: caused by unknown slot %d\n", slot);
+	} else if(slot < MCA_MAX_SLOT_NR) {
 		printk(KERN_CRIT "NMI: caused by MCA adapter in slot %d (%s)\n", slot+1,
-			mca_info->slot[slot].name);
+			mca_dev->dev.name);
 	} else if(slot == MCA_INTEGSCSI) {
 		printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
-			mca_info->slot[slot].name);
+			mca_dev->dev.name);
 	} else if(slot == MCA_INTEGVIDEO) {
 		printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
-			mca_info->slot[slot].name);
+			mca_dev->dev.name);
 	} else if(slot == MCA_MOTHERBOARD) {
 		printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
-			mca_info->slot[slot].name);
+			mca_dev->dev.name);
 	}
 
 	/* More info available in POS 6 and 7? */
@@ -383,603 +468,3 @@ void mca_handle_nmi(void)
 	}
 	mca_nmi_hook();
 } /* mca_handle_nmi */
-
-/*--------------------------------------------------------------------*/
-
-/**
- *	mca_find_adapter - scan for adapters
- *	@id:	MCA identification to search for
- *	@start:	starting slot
- *
- *	Search the MCA configuration for adapters matching the 16bit
- *	ID given. The first time it should be called with start as zero
- *	and then further calls made passing the return value of the
- *	previous call until %MCA_NOTFOUND is returned.
- *
- *	Disabled adapters are not reported.
- */
-
-int mca_find_adapter(int id, int start)
-{
-	if(mca_info == NULL || id == 0xffff) {
-		return MCA_NOTFOUND;
-	}
-
-	for(; start >= 0 && start < MCA_NUMADAPTERS; start++) {
-
-		/* Not sure about this. There's no point in returning
-		 * adapters that aren't enabled, since they can't actually
-		 * be used. However, they might be needed for statistical
-		 * purposes or something... But if that is the case, the
-		 * user is free to write a routine that manually iterates
-		 * through the adapters.
-		 */
-
-		if(mca_info->slot[start].status == MCA_ADAPTER_DISABLED) {
-			continue;
-		}
-
-		if(id == mca_info->slot[start].id) {
-			return start;
-		}
-	}
-
-	return MCA_NOTFOUND;
-} /* mca_find_adapter() */
-
-EXPORT_SYMBOL(mca_find_adapter);
-
-/*--------------------------------------------------------------------*/
-
-/**
- *	mca_find_unused_adapter - scan for unused adapters
- *	@id:	MCA identification to search for
- *	@start:	starting slot
- *
- *	Search the MCA configuration for adapters matching the 16bit
- *	ID given. The first time it should be called with start as zero
- *	and then further calls made passing the return value of the
- *	previous call until %MCA_NOTFOUND is returned.
- *
- *	Adapters that have been claimed by drivers and those that
- *	are disabled are not reported. This function thus allows a driver
- *	to scan for further cards when some may already be driven.
- */
-
-int mca_find_unused_adapter(int id, int start)
-{
-	if(mca_info == NULL || id == 0xffff) {
-		return MCA_NOTFOUND;
-	}
-
-	for(; start >= 0 && start < MCA_NUMADAPTERS; start++) {
-
-		/* not sure about this. There's no point in returning
-		 * adapters that aren't enabled, since they can't actually
-		 * be used. However, they might be needed for statistical
-		 * purposes or something... But if that is the case, the
-		 * user is free to write a routine that manually iterates
-		 * through the adapters.
-		 */
-
-		if(mca_info->slot[start].status == MCA_ADAPTER_DISABLED ||
-		   mca_info->slot[start].driver_loaded) {
-			continue;
-		}
-
-		if(id == mca_info->slot[start].id) {
-			return start;
-		}
-	}
-
-	return MCA_NOTFOUND;
-} /* mca_find_unused_adapter() */
-
-EXPORT_SYMBOL(mca_find_unused_adapter);
-
-/*--------------------------------------------------------------------*/
-
-/**
- *	mca_read_stored_pos - read POS register from boot data
- *	@slot: slot number to read from
- *	@reg:  register to read from
- *
- *	Fetch a POS value that was stored at boot time by the kernel
- *	when it scanned the MCA space. The register value is returned.
- *	Missing or invalid registers report 0.
- */
-
-unsigned char mca_read_stored_pos(int slot, int reg)
-{
-	if(slot < 0 || slot >= MCA_NUMADAPTERS || mca_info == NULL) return 0;
-	if(reg < 0 || reg >= 8) return 0;
-	return mca_info->slot[slot].pos[reg];
-} /* mca_read_stored_pos() */
-
-EXPORT_SYMBOL(mca_read_stored_pos);
-
-/*--------------------------------------------------------------------*/
-
-/**
- *	mca_read_pos - read POS register from card
- *	@slot: slot number to read from
- *	@reg:  register to read from
- *
- *	Fetch a POS value directly from the hardware to obtain the
- *	current value. This is much slower than mca_read_stored_pos and
- *	may not be invoked from interrupt context. It handles the
- *	deep magic required for onboard devices transparently.
- */
-
-unsigned char mca_read_pos(int slot, int reg)
-{
-	unsigned int byte = 0;
-	unsigned long flags;
-
-	if(slot < 0 || slot >= MCA_NUMADAPTERS || mca_info == NULL) return 0;
-	if(reg < 0 || reg >= 8) return 0;
-
-	spin_lock_irqsave(&mca_lock, flags);
-
-	/* Make sure motherboard setup is off */
-
-	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-	/* Read in the appropriate register */
-
-	if(slot == MCA_INTEGSCSI && mca_info->which_scsi) {
-
-		/* Disable adapter setup, enable motherboard setup */
-
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-		outb_p(mca_info->which_scsi, MCA_MOTHERBOARD_SETUP_REG);
-
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-	} else if(slot == MCA_INTEGVIDEO) {
-
-		/* Disable adapter setup, enable motherboard setup */
-
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-		outb_p(0xdf, MCA_MOTHERBOARD_SETUP_REG);
-
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-	} else if(slot == MCA_MOTHERBOARD) {
-
-		/* Disable adapter setup, enable motherboard setup */
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-		outb_p(0x7f, MCA_MOTHERBOARD_SETUP_REG);
-
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-	} else if(slot < MCA_MAX_SLOT_NR) {
-
-		/* Make sure motherboard setup is off */
-
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-		/* Read the appropriate register */
-
-		outb_p(0x8|(slot&0xf), MCA_ADAPTER_SETUP_REG);
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-	}
-
-	/* Make sure the stored values are consistent, while we're here */
-
-	mca_info->slot[slot].pos[reg] = byte;
-
-	spin_unlock_irqrestore(&mca_lock, flags);
-
-	return byte;
-} /* mca_read_pos() */
-
-EXPORT_SYMBOL(mca_read_pos);
-
-/*--------------------------------------------------------------------*/
-
-/**
- *	mca_write_pos - read POS register from card
- *	@slot: slot number to read from
- *	@reg:  register to read from
- *	@byte: byte to write to the POS registers
- *
- *	Store a POS value directly from the hardware. You should not
- *	normally need to use this function and should have a very good
- *	knowledge of MCA bus before you do so. Doing this wrongly can
- *	damage the hardware.
- *
- *	This function may not be used from interrupt context.
- *
- *	Note that this a technically a Bad Thing, as IBM tech stuff says
- *	you should only set POS values through their utilities.
- *	However, some devices such as the 3c523 recommend that you write
- *	back some data to make sure the configuration is consistent.
- *	I'd say that IBM is right, but I like my drivers to work.
- *
- *	This function can't do checks to see if multiple devices end up
- *	with the same resources, so you might see magic smoke if someone
- *	screws up.
- */
-
-void mca_write_pos(int slot, int reg, unsigned char byte)
-{
-	unsigned long flags;
-
-	if(slot < 0 || slot >= MCA_MAX_SLOT_NR)
-		return;
-	if(reg < 0 || reg >= 8)
-		return;
-	if(mca_info == NULL)
-		return;
-
-	spin_lock_irqsave(&mca_lock, flags);
-
-	/* Make sure motherboard setup is off */
-
-	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-	/* Read in the appropriate register */
-
-	outb_p(0x8|(slot&0xf), MCA_ADAPTER_SETUP_REG);
-	outb_p(byte, MCA_POS_REG(reg));
-	outb_p(0, MCA_ADAPTER_SETUP_REG);
-
-	spin_unlock_irqrestore(&mca_lock, flags);
-
-	/* Update the global register list, while we have the byte */
-
-	mca_info->slot[slot].pos[reg] = byte;
-} /* mca_write_pos() */
-
-EXPORT_SYMBOL(mca_write_pos);
-
-/*--------------------------------------------------------------------*/
-
-/**
- *	mca_set_adapter_name - Set the description of the card
- *	@slot: slot to name
- *	@name: text string for the namen
- *
- *	This function sets the name reported via /proc for this
- *	adapter slot. This is for user information only. Setting a
- *	name deletes any previous name.
- */
-
-void mca_set_adapter_name(int slot, char* name)
-{
-	if(mca_info == NULL) return;
-
-	if(slot >= 0 && slot < MCA_NUMADAPTERS) {
-		if(name != NULL) {
-			strncpy(mca_info->slot[slot].name, name,
-				sizeof(mca_info->slot[slot].name)-1);
-			mca_info->slot[slot].name[
-				sizeof(mca_info->slot[slot].name)-1] = 0;
-		} else {
-			mca_info->slot[slot].name[0] = 0;
-		}
-	}
-}
-
-EXPORT_SYMBOL(mca_set_adapter_name);
-
-/**
- *	mca_set_adapter_procfn - Set the /proc callback
- *	@slot: slot to configure
- *	@procfn: callback function to call for /proc
- *	@dev: device information passed to the callback
- *
- *	This sets up an information callback for /proc/mca/slot?.  The
- *	function is called with the buffer, slot, and device pointer (or
- *	some equally informative context information, or nothing, if you
- *	prefer), and is expected to put useful information into the
- *	buffer.  The adapter name, ID, and POS registers get printed
- *	before this is called though, so don't do it again.
- *
- *	This should be called with a %NULL @procfn when a module
- *	unregisters, thus preventing kernel crashes and other such
- *	nastiness.
- */
-
-void mca_set_adapter_procfn(int slot, MCA_ProcFn procfn, void* dev)
-{
-	if(mca_info == NULL) return;
-
-	if(slot >= 0 && slot < MCA_NUMADAPTERS) {
-		mca_info->slot[slot].procfn = procfn;
-		mca_info->slot[slot].dev = dev;
-	}
-}
-
-EXPORT_SYMBOL(mca_set_adapter_procfn);
-
-/**
- *	mca_is_adapter_used - check if claimed by driver
- *	@slot:	slot to check
- *
- *	Returns 1 if the slot has been claimed by a driver
- */
-
-int mca_is_adapter_used(int slot)
-{
-	return mca_info->slot[slot].driver_loaded;
-}
-
-EXPORT_SYMBOL(mca_is_adapter_used);
-
-/**
- *	mca_mark_as_used - claim an MCA device
- *	@slot:	slot to claim
- *	FIXME:  should we make this threadsafe
- *
- *	Claim an MCA slot for a device driver. If the
- *	slot is already taken the function returns 1,
- *	if it is not taken it is claimed and 0 is
- *	returned.
- */
-
-int mca_mark_as_used(int slot)
-{
-	if(mca_info->slot[slot].driver_loaded) return 1;
-	mca_info->slot[slot].driver_loaded = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(mca_mark_as_used);
-
-/**
- *	mca_mark_as_unused - release an MCA device
- *	@slot:	slot to claim
- *
- *	Release the slot for other drives to use.
- */
-
-void mca_mark_as_unused(int slot)
-{
-	mca_info->slot[slot].driver_loaded = 0;
-}
-
-EXPORT_SYMBOL(mca_mark_as_unused);
-
-/**
- *	mca_get_adapter_name - get the adapter description
- *	@slot:	slot to query
- *
- *	Return the adapter description if set. If it has not been
- *	set or the slot is out range then return NULL.
- */
-
-char *mca_get_adapter_name(int slot)
-{
-	if(mca_info == NULL) return 0;
-
-	if(slot >= 0 && slot < MCA_NUMADAPTERS) {
-		return mca_info->slot[slot].name;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(mca_get_adapter_name);
-
-/**
- *	mca_isadapter - check if the slot holds an adapter
- *	@slot:	slot to query
- *
- *	Returns zero if the slot does not hold an adapter, non zero if
- *	it does.
- */
-
-int mca_isadapter(int slot)
-{
-	if(mca_info == NULL) return 0;
-
-	if(slot >= 0 && slot < MCA_NUMADAPTERS) {
-		return ((mca_info->slot[slot].status == MCA_ADAPTER_NORMAL)
-			|| (mca_info->slot[slot].status == MCA_ADAPTER_DISABLED));
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(mca_isadapter);
-
-
-/**
- *	mca_isadapter - check if the slot holds an adapter
- *	@slot:	slot to query
- *
- *	Returns a non zero value if the slot holds an enabled adapter
- *	and zero for any other case.
- */
-
-int mca_isenabled(int slot)
-{
-	if(mca_info == NULL) return 0;
-
-	if(slot >= 0 && slot < MCA_NUMADAPTERS) {
-		return (mca_info->slot[slot].status == MCA_ADAPTER_NORMAL);
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(mca_isenabled);
-
-/*--------------------------------------------------------------------*/
-
-#ifdef CONFIG_PROC_FS
-
-int get_mca_info(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int i, j, len = 0;
-
-	if(MCA_bus && mca_info != NULL) {
-		/* Format POS registers of eight MCA slots */
-
-		for(i=0; i<MCA_MAX_SLOT_NR; i++) {
-			len += sprintf(page+len, "Slot %d: ", i+1);
-			for(j=0; j<8; j++)
-				len += sprintf(page+len, "%02x ", mca_info->slot[i].pos[j]);
-			len += sprintf(page+len, " %s\n", mca_info->slot[i].name);
-		}
-
-		/* Format POS registers of integrated video subsystem */
-
-		len += sprintf(page+len, "Video : ");
-		for(j=0; j<8; j++)
-			len += sprintf(page+len, "%02x ", mca_info->slot[MCA_INTEGVIDEO].pos[j]);
-		len += sprintf(page+len, " %s\n", mca_info->slot[MCA_INTEGVIDEO].name);
-
-		/* Format POS registers of integrated SCSI subsystem */
-
-		len += sprintf(page+len, "SCSI  : ");
-		for(j=0; j<8; j++)
-			len += sprintf(page+len, "%02x ", mca_info->slot[MCA_INTEGSCSI].pos[j]);
-		len += sprintf(page+len, " %s\n", mca_info->slot[MCA_INTEGSCSI].name);
-
-		/* Format POS registers of motherboard */
-
-		len += sprintf(page+len, "Planar: ");
-		for(j=0; j<8; j++)
-			len += sprintf(page+len, "%02x ", mca_info->slot[MCA_MOTHERBOARD].pos[j]);
-		len += sprintf(page+len, " %s\n", mca_info->slot[MCA_MOTHERBOARD].name);
-	} else {
-		/* Leave it empty if MCA not detected - this should *never*
-		 * happen!
-		 */
-	}
-
-	if (len <= off+count) *eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len>count) len = count;
-	if (len<0) len = 0;
-	return len;
-}
-
-/*--------------------------------------------------------------------*/
-
-static int mca_default_procfn(char* buf, struct MCA_adapter *p)
-{
-	int len = 0, i;
-	int slot = p - mca_info->slot;
-
-	/* Print out the basic information */
-
-	if(slot < MCA_MAX_SLOT_NR) {
-		len += sprintf(buf+len, "Slot: %d\n", slot+1);
-	} else if(slot == MCA_INTEGSCSI) {
-		len += sprintf(buf+len, "Integrated SCSI Adapter\n");
-	} else if(slot == MCA_INTEGVIDEO) {
-		len += sprintf(buf+len, "Integrated Video Adapter\n");
-	} else if(slot == MCA_MOTHERBOARD) {
-		len += sprintf(buf+len, "Motherboard\n");
-	}
-	if(p->name[0]) {
-
-		/* Drivers might register a name without /proc handler... */
-
-		len += sprintf(buf+len, "Adapter Name: %s\n",
-			p->name);
-	} else {
-		len += sprintf(buf+len, "Adapter Name: Unknown\n");
-	}
-	len += sprintf(buf+len, "Id: %02x%02x\n",
-		p->pos[1], p->pos[0]);
-	len += sprintf(buf+len, "Enabled: %s\nPOS: ",
-		mca_isenabled(slot) ? "Yes" : "No");
-	for(i=0; i<8; i++) {
-		len += sprintf(buf+len, "%02x ", p->pos[i]);
-	}
-	len += sprintf(buf+len, "\nDriver Installed: %s",
-		mca_is_adapter_used(slot) ? "Yes" : "No");
-	buf[len++] = '\n';
-	buf[len] = 0;
-
-	return len;
-} /* mca_default_procfn() */
-
-static int get_mca_machine_info(char* page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	int len = 0;
-
-	len += sprintf(page+len, "Model Id: 0x%x\n", machine_id);
-	len += sprintf(page+len, "Submodel Id: 0x%x\n", machine_submodel_id);
-	len += sprintf(page+len, "BIOS Revision: 0x%x\n", BIOS_revision);
-
-	if (len <= off+count) *eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len>count) len = count;
-	if (len<0) len = 0;
-	return len;
-}
-
-static int mca_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
-{
-	struct MCA_adapter *p = (struct MCA_adapter *)data;
-	int len = 0;
-
-	/* Get the standard info */
-
-	len = mca_default_procfn(page, p);
-
-	/* Do any device-specific processing, if there is any */
-
-	if(p->procfn) {
-		len += p->procfn(page+len, p-mca_info->slot, p->dev);
-	}
-	if (len <= off+count) *eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len>count) len = count;
-	if (len<0) len = 0;
-	return len;
-} /* mca_read_proc() */
-
-/*--------------------------------------------------------------------*/
-
-void __init mca_do_proc_init(void)
-{
-	int i;
-	struct proc_dir_entry *proc_mca;
-	struct proc_dir_entry* node = NULL;
-	struct MCA_adapter *p;
-
-	if(mca_info == NULL) return;	/* Should never happen */
-
-	proc_mca = proc_mkdir("mca", &proc_root);
-	create_proc_read_entry("pos",0,proc_mca,get_mca_info,NULL);
-	create_proc_read_entry("machine",0,proc_mca,get_mca_machine_info,NULL);
-
-	/* Initialize /proc/mca entries for existing adapters */
-
-	for(i = 0; i < MCA_NUMADAPTERS; i++) {
-		p = &mca_info->slot[i];
-		p->procfn = 0;
-
-		if(i < MCA_MAX_SLOT_NR) sprintf(p->procname,"slot%d", i+1);
-		else if(i == MCA_INTEGVIDEO) sprintf(p->procname,"video");
-		else if(i == MCA_INTEGSCSI) sprintf(p->procname,"scsi");
-		else if(i == MCA_MOTHERBOARD) sprintf(p->procname,"planar");
-
-		if(!mca_isadapter(i)) continue;
-
-		node = create_proc_read_entry(p->procname, 0, proc_mca,
-						mca_read_proc, (void *)p);
-
-		if(node == NULL) {
-			printk("Failed to allocate memory for MCA proc-entries!");
-			return;
-		}
-	}
-
-} /* mca_do_proc_init() */
-
-#endif

drivers/Makefile

@@ -42,5 +42,6 @@ obj-$(CONFIG_MD)		+= md/
 obj-$(CONFIG_BT)		+= bluetooth/
 obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
 obj-$(CONFIG_ISDN_BOOL)		+= isdn/
+obj-$(CONFIG_MCA)		+= mca/
 
 include $(TOPDIR)/Rules.make

drivers/mca/Makefile

+# Makefile for the Linux MCA bus support
+
+obj-y	:= mca-bus.o mca-device.o mca-legacy.o
+
+obj-$(CONFIG_PROC_FS)	+= mca-proc.o
+
+export-objs	:= mca-bus.o mca-legacy.o mca-proc.o
+
+include $(TOPDIR)/Rules.make

drivers/mca/mca-bus.c

+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/*
+ * MCA bus support functions for sysfs.
+ *
+ * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
+ *
+**-----------------------------------------------------------------------------
+**  
+**  This program is free software; you can redistribute it and/or modify
+**  it under the terms of the GNU General Public License as published by
+**  the Free Software Foundation; either version 2 of the License, or
+**  (at your option) any later version.
+**
+**  This program is distributed in the hope that it will be useful,
+**  but WITHOUT ANY WARRANTY; without even the implied warranty of
+**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+**  GNU General Public License for more details.
+**
+**  You should have received a copy of the GNU General Public License
+**  along with this program; if not, write to the Free Software
+**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mca.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <asm/io.h>
+
+/* Very few machines have more than one MCA bus.  However, there are
+ * those that do (Voyager 35xx/5xxx), so we do it this way for future
+ * expansion.  None that I know have more than 2 */
+struct mca_bus *mca_root_busses[MAX_MCA_BUSSES];
+
+#define MCA_DEVINFO(i,s) { .pos = i, .name = s }
+
+struct mca_device_info {
+	short pos_id;		/* the 2 byte pos id for this card */
+	char name[DEVICE_NAME_SIZE];
+};
+
+static int mca_bus_match (struct device *dev, struct device_driver *drv)
+{
+	struct mca_device *mca_dev = to_mca_device (dev);
+	struct mca_driver *mca_drv = to_mca_driver (drv);
+	const short *mca_ids = mca_drv->id_table;
+
+	if (!mca_ids)
+		return 0;
+
+	while (*mca_ids) {
+		if (*mca_ids == mca_dev->pos_id)
+			return 1;
+
+		mca_ids++;
+	}
+
+	return 0;
+}
+
+struct bus_type mca_bus_type = {
+	.name  = "MCA",
+	.match = mca_bus_match,
+};
+EXPORT_SYMBOL (mca_bus_type);
+
+int mca_driver_register (struct mca_driver *mca_drv)
+{
+	int r;
+	
+	mca_drv->driver.bus = &mca_bus_type;
+	if ((r = driver_register (&mca_drv->driver)) < 0)
+		return r;
+
+	return 1;
+}
+
+void mca_driver_unregister (struct mca_driver *mca_drv)
+{
+	bus_remove_driver (&mca_drv->driver);
+	driver_unregister (&mca_drv->driver);
+}
+
+
+static ssize_t mca_show_pos_id(struct device *dev, char *buf, size_t count,
+			       loff_t off)
+{
+	/* four digits, \n and trailing \0 */
+	char mybuf[6];
+	struct mca_device *mca_dev = to_mca_device(dev);
+	int len;
+
+	if(mca_dev->pos_id < MCA_DUMMY_POS_START)
+		len = sprintf(mybuf, "%04x\n", mca_dev->pos_id);
+	else
+		len = sprintf(mybuf, "none\n");
+
+	len++;
+	if(len > off) {
+		len = min((size_t)(len - off), count);
+		memcpy(buf + off, mybuf + off, len);
+	} else {
+		len = 0;
+	}
+	return len;
+}
+static ssize_t mca_show_pos(struct device *dev, char *buf, size_t count,
+			    loff_t off)
+{
+	/* enough for 8 two byte hex chars plus space and new line */
+	char mybuf[26];
+	int j, len=0;
+	struct mca_device *mca_dev = to_mca_device(dev);
+
+	for(j=0; j<8; j++)
+		len += sprintf(mybuf+len, "%02x ", mca_dev->pos[j]);
+	/* change last trailing space to new line */
+	mybuf[len-1] = '\n';
+	len++;
+	if(len > off) {
+		len = min((size_t)(len - off), count);
+		memcpy(buf + off, mybuf + off, len);
+	} else {
+		len = 0;
+	}
+	return len;
+}
+
+static DEVICE_ATTR(id, S_IRUGO, mca_show_pos_id, NULL);
+static DEVICE_ATTR(pos, S_IRUGO, mca_show_pos, NULL);
+
+int __init mca_register_device (int bus, struct mca_device *mca_dev)
+{
+	struct mca_bus *mca_bus = mca_root_busses[bus];
+
+	mca_dev->dev.parent = &mca_bus->dev;
+	mca_dev->dev.bus = &mca_bus_type;
+	sprintf (mca_dev->dev.bus_id, "%02d:%02X", bus, mca_dev->slot);
+	mca_dev->dma_mask = mca_bus->default_dma_mask;
+	/* FIXME: uncomment this when we get a global idea of where
+	 * dma_mask goes */
+	//mca_dev->dev.dma_mask = &mca_dev->dma_mask;
+
+	if (device_register(&mca_dev->dev))
+		return 0;
+
+	device_create_file(&mca_dev->dev, &dev_attr_id);
+	device_create_file(&mca_dev->dev, &dev_attr_pos);
+
+	return 1;
+}
+
+/* */
+struct mca_bus * __devinit mca_attach_bus(int bus)
+{
+	struct mca_bus *mca_bus;
+
+	if (unlikely(mca_root_busses[bus] != NULL)) {
+		/* This should never happen, but just in case */
+		printk(KERN_EMERG "MCA tried to add already existing bus %d\n",
+		       bus);
+		dump_stack();
+		return NULL;
+	}
+
+	mca_bus = kmalloc(sizeof(struct mca_bus), GFP_KERNEL);
+	if (!mca_bus)
+		return NULL;
+	memset(mca_bus, 0, sizeof(struct mca_bus));
+	sprintf(mca_bus->dev.bus_id,"mca%d",bus);
+	sprintf(mca_bus->dev.name,"Host %s MCA Bridge", bus ? "Secondary" : "Primary");
+	device_register(&mca_bus->dev);
+
+	mca_root_busses[bus] = mca_bus;
+
+	return mca_bus;
+}
+
+int __init mca_system_init (void)
+{
+	return bus_register(&mca_bus_type);
+}
+
+EXPORT_SYMBOL (mca_driver_register);
+EXPORT_SYMBOL (mca_driver_unregister);

drivers/mca/mca-device.c

+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/*
+ * MCA device support functions
+ *
+ * These functions support the ongoing device access API.
+ *
+ * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
+ *
+**-----------------------------------------------------------------------------
+**  
+**  This program is free software; you can redistribute it and/or modify
+**  it under the terms of the GNU General Public License as published by
+**  the Free Software Foundation; either version 2 of the License, or
+**  (at your option) any later version.
+**
+**  This program is distributed in the hope that it will be useful,
+**  but WITHOUT ANY WARRANTY; without even the implied warranty of
+**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+**  GNU General Public License for more details.
+**
+**  You should have received a copy of the GNU General Public License
+**  along with this program; if not, write to the Free Software
+**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mca.h>
+
+/**
+ *	mca_device_read_stored_pos - read POS register from stored data
+ *	@mca_dev: device to read from
+ *	@reg:  register to read from
+ *
+ *	Fetch a POS value that was stored at boot time by the kernel
+ *	when it scanned the MCA space. The register value is returned.
+ *	Missing or invalid registers report 0.
+ */
+unsigned char mca_device_read_stored_pos(struct mca_device *mca_dev, int reg)
+{
+	if(reg < 0 || reg >= 8)
+		return 0;
+
+	return mca_dev->pos[reg];
+}
+EXPORT_SYMBOL(mca_device_read_stored_pos);
+
+/**
+ *	mca_device_read_pos - read POS register from card
+ *	@mca_dev: device to read from
+ *	@reg:  register to read from
+ *
+ *	Fetch a POS value directly from the hardware to obtain the
+ *	current value. This is much slower than
+ *	mca_device_read_stored_pos and may not be invoked from
+ *	interrupt context. It handles the deep magic required for
+ *	onboard devices transparently.
+ */
+unsigned char mca_device_read_pos(struct mca_device *mca_dev, int reg)
+{
+	struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
+
+	return mca_bus->f.mca_read_pos(mca_dev, reg);
+
+	return 	mca_dev->pos[reg];
+}
+EXPORT_SYMBOL(mca_device_read_pos);
+
+
+/**
+ *	mca_device_write_pos - read POS register from card
+ *	@mca_dev: device to write pos register to
+ *	@reg:  register to write to
+ *	@byte: byte to write to the POS registers
+ *
+ *	Store a POS value directly to the hardware. You should not
+ *	normally need to use this function and should have a very good
+ *	knowledge of MCA bus before you do so. Doing this wrongly can
+ *	damage the hardware.
+ *
+ *	This function may not be used from interrupt context.
+ *
+ */
+void mca_device_write_pos(struct mca_device *mca_dev, int reg,
+			  unsigned char byte)
+{
+	struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
+
+	mca_bus->f.mca_write_pos(mca_dev, reg, byte);
+}
+EXPORT_SYMBOL(mca_device_write_pos);
+
+/**
+ *	mca_device_transform_irq - transform the ADF obtained IRQ
+ *	@mca_device: device whose irq needs transforming
+ *	@irq: input irq from ADF
+ *
+ *	MCA Adapter Definition Files (ADF) contain irq, ioport, memory
+ *	etc. definitions.  In systems with more than one bus, these need
+ *	to be transformed through bus mapping functions to get the real
+ *	system global quantities.
+ *
+ *	This function transforms the interrupt number and returns the
+ *	transformed system global interrupt
+ */
+int mca_device_transform_irq(struct mca_device *mca_dev, int irq)
+{
+	struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
+
+	return mca_bus->f.mca_transform_irq(mca_dev, irq);
+}
+EXPORT_SYMBOL(mca_device_transform_irq);
+
+/**
+ *	mca_device_transform_ioport - transform the ADF obtained I/O port
+ *	@mca_device: device whose port needs transforming
+ *	@ioport: input I/O port from ADF
+ *
+ *	MCA Adapter Definition Files (ADF) contain irq, ioport, memory
+ *	etc. definitions.  In systems with more than one bus, these need
+ *	to be transformed through bus mapping functions to get the real
+ *	system global quantities.
+ *
+ *	This function transforms the I/O port number and returns the
+ *	transformed system global port number.
+ *
+ *	This transformation can be assumed to be linear for port ranges.
+ */
+int mca_device_transform_ioport(struct mca_device *mca_dev, int port)
+{
+	struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
+
+	return mca_bus->f.mca_transform_ioport(mca_dev, port);
+}
+EXPORT_SYMBOL(mca_device_transform_ioport);
+
+/**
+ *	mca_device_transform_memory - transform the ADF obtained memory
+ *	@mca_device: device whose memory region needs transforming
+ *	@mem: memory region start from ADF
+ *
+ *	MCA Adapter Definition Files (ADF) contain irq, ioport, memory
+ *	etc. definitions.  In systems with more than one bus, these need
+ *	to be transformed through bus mapping functions to get the real
+ *	system global quantities.
+ *
+ *	This function transforms the memory region start and returns the
+ *	transformed system global memory region (physical).
+ *
+ *	This transformation can be assumed to be linear for region ranges.
+ */
+void *mca_device_transform_memory(struct mca_device *mca_dev, void *mem)
+{
+	struct mca_bus *mca_bus = to_mca_bus(mca_dev->dev.parent);
+
+	return mca_bus->f.mca_transform_memory(mca_dev, mem);
+}
+EXPORT_SYMBOL(mca_device_transform_memory);
+
+
+/**
+ *	mca_device_claimed - check if claimed by driver
+ *	@mca_dev:	device to check
+ *
+ *	Returns 1 if the slot has been claimed by a driver
+ */
+
+int mca_device_claimed(struct mca_device *mca_dev)
+{
+	return mca_dev->driver_loaded;
+}
+EXPORT_SYMBOL(mca_device_claimed);
+
+/**
+ *	mca_device_set_claim - set the claim value of the driver
+ *	@mca_dev:	device to set value for
+ *	@val:		claim value to set (1 claimed, 0 unclaimed)
+ */
+void mca_device_set_claim(struct mca_device *mca_dev, int val)
+{
+	mca_dev->driver_loaded = val;
+}
+EXPORT_SYMBOL(mca_device_set_claim);
+
+/**
+ *	mca_device_status - get the status of the device
+ *	@mca_device:	device to get
+ *
+ *	returns an enumeration of the device status:
+ *
+ *	MCA_ADAPTER_NORMAL	adapter is OK.
+ *	MCA_ADAPTER_NONE	no adapter at device (should never happen).
+ *	MCA_ADAPTER_DISABLED	adapter is disabled.
+ *	MCA_ADAPTER_ERROR	adapter cannot be initialised.
+ */
+enum MCA_AdapterStatus mca_device_status(struct mca_device *mca_dev)
+{
+	return mca_dev->status;
+}

drivers/mca/mca-legacy.c

+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/*
+ * MCA bus support functions for legacy (2.4) API.
+ *
+ * Legacy API means the API that operates in terms of MCA slot number
+ *
+ * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
+ *
+**-----------------------------------------------------------------------------
+**  
+**  This program is free software; you can redistribute it and/or modify
+**  it under the terms of the GNU General Public License as published by
+**  the Free Software Foundation; either version 2 of the License, or
+**  (at your option) any later version.
+**
+**  This program is distributed in the hope that it will be useful,
+**  but WITHOUT ANY WARRANTY; without even the implied warranty of
+**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+**  GNU General Public License for more details.
+**
+**  You should have received a copy of the GNU General Public License
+**  along with this program; if not, write to the Free Software
+**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mca.h>
+#include <asm/io.h>
+
+/* NOTE: This structure is stack allocated */
+struct mca_find_adapter_info {
+	int			id;
+	int			slot;
+	struct mca_device	*mca_dev;
+};
+
+/* The purpose of this iterator is to loop over all the devices and
+ * find the one with the smallest slot number that's just greater than
+ * or equal to the required slot with a matching id */
+static int mca_find_adapter_callback(struct device *dev, void *data)
+{
+	struct mca_find_adapter_info *info = data;
+	struct mca_device *mca_dev = to_mca_device(dev);
+
+	if(mca_dev->pos_id != info->id)
+		return 0;
+
+	if(mca_dev->slot < info->slot)
+		return 0;
+
+	if(!info->mca_dev || info->mca_dev->slot >= mca_dev->slot)
+		info->mca_dev = mca_dev;
+
+	return 0;
+}
+
+/**
+ *	mca_find_adapter - scan for adapters
+ *	@id:	MCA identification to search for
+ *	@start:	starting slot
+ *
+ *	Search the MCA configuration for adapters matching the 16bit
+ *	ID given. The first time it should be called with start as zero
+ *	and then further calls made passing the return value of the
+ *	previous call until %MCA_NOTFOUND is returned.
+ *
+ *	Disabled adapters are not reported.
+ */
+
+int mca_find_adapter(int id, int start)
+{
+	struct mca_find_adapter_info info;
+
+	if(id == 0xffff)
+		return MCA_NOTFOUND;
+
+	info.slot = start;
+	info.id = id;
+	info.mca_dev = NULL;
+
+	for(;;) {
+		bus_for_each_dev(&mca_bus_type, &info, mca_find_adapter_callback);
+
+		if(info.mca_dev == NULL)
+			return MCA_NOTFOUND;
+
+		if(info.mca_dev->status != MCA_ADAPTER_DISABLED)
+			break;
+
+		/* OK, found adapter but it was disabled.  Go around
+		 * again, excluding the slot we just found */
+
+		info.slot = info.mca_dev->slot + 1;
+		info.mca_dev = NULL;
+	}
+		
+	return info.mca_dev->slot;
+}
+EXPORT_SYMBOL(mca_find_adapter);
+
+/*--------------------------------------------------------------------*/
+
+/**
+ *	mca_find_unused_adapter - scan for unused adapters
+ *	@id:	MCA identification to search for
+ *	@start:	starting slot
+ *
+ *	Search the MCA configuration for adapters matching the 16bit
+ *	ID given. The first time it should be called with start as zero
+ *	and then further calls made passing the return value of the
+ *	previous call until %MCA_NOTFOUND is returned.
+ *
+ *	Adapters that have been claimed by drivers and those that
+ *	are disabled are not reported. This function thus allows a driver
+ *	to scan for further cards when some may already be driven.
+ */
+
+int mca_find_unused_adapter(int id, int start)
+{
+	struct mca_find_adapter_info info = { 0 };
+
+	if(id == 0xffff)
+		return MCA_NOTFOUND;
+
+	info.slot = start;
+	info.id = id;
+	info.mca_dev = NULL;
+
+	for(;;) {
+		bus_for_each_dev(&mca_bus_type, &info, mca_find_adapter_callback);
+
+		if(info.mca_dev == NULL)
+			return MCA_NOTFOUND;
+
+		if(info.mca_dev->status != MCA_ADAPTER_DISABLED
+		   && !info.mca_dev->driver_loaded)
+			break;
+
+		/* OK, found adapter but it was disabled or already in
+		 * use.  Go around again, excluding the slot we just
+		 * found */
+
+		info.slot = info.mca_dev->slot + 1;
+		info.mca_dev = NULL;
+	}
+		
+	return info.mca_dev->slot;
+}
+EXPORT_SYMBOL(mca_find_unused_adapter);
+
+/* NOTE: stack allocated structure */
+struct mca_find_device_by_slot_info {
+	int			slot;
+	struct mca_device 	*mca_dev;
+};
+
+static int mca_find_device_by_slot_callback(struct device *dev, void *data)
+{
+	struct mca_find_device_by_slot_info *info = data;
+	struct mca_device *mca_dev = to_mca_device(dev);
+
+	if(mca_dev->slot == info->slot)
+		info->mca_dev = mca_dev;
+
+	return 0;
+}
+
+struct mca_device *mca_find_device_by_slot(int slot)
+{
+	struct mca_find_device_by_slot_info info;
+
+	info.slot = slot;
+	info.mca_dev = NULL;
+
+	bus_for_each_dev(&mca_bus_type, &info, mca_find_device_by_slot_callback);
+
+	return info.mca_dev;
+}
+EXPORT_SYMBOL(mca_find_device_by_slot);
+
+/**
+ *	mca_read_stored_pos - read POS register from boot data
+ *	@slot: slot number to read from
+ *	@reg:  register to read from
+ *
+ *	Fetch a POS value that was stored at boot time by the kernel
+ *	when it scanned the MCA space. The register value is returned.
+ *	Missing or invalid registers report 0.
+ */
+unsigned char mca_read_stored_pos(int slot, int reg)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return 0;
+
+	return mca_device_read_stored_pos(mca_dev, reg);
+}
+EXPORT_SYMBOL(mca_read_stored_pos);
+
+
+/**
+ *	mca_read_pos - read POS register from card
+ *	@slot: slot number to read from
+ *	@reg:  register to read from
+ *
+ *	Fetch a POS value directly from the hardware to obtain the
+ *	current value. This is much slower than mca_read_stored_pos and
+ *	may not be invoked from interrupt context. It handles the
+ *	deep magic required for onboard devices transparently.
+ */
+
+unsigned char mca_read_pos(int slot, int reg)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return 0;
+
+	return mca_device_read_pos(mca_dev, reg);
+}
+EXPORT_SYMBOL(mca_read_pos);
+
+		
+/**
+ *	mca_write_pos - read POS register from card
+ *	@slot: slot number to read from
+ *	@reg:  register to read from
+ *	@byte: byte to write to the POS registers
+ *
+ *	Store a POS value directly from the hardware. You should not
+ *	normally need to use this function and should have a very good
+ *	knowledge of MCA bus before you do so. Doing this wrongly can
+ *	damage the hardware.
+ *
+ *	This function may not be used from interrupt context.
+ *
+ *	Note that this a technically a Bad Thing, as IBM tech stuff says
+ *	you should only set POS values through their utilities.
+ *	However, some devices such as the 3c523 recommend that you write
+ *	back some data to make sure the configuration is consistent.
+ *	I'd say that IBM is right, but I like my drivers to work.
+ *
+ *	This function can't do checks to see if multiple devices end up
+ *	with the same resources, so you might see magic smoke if someone
+ *	screws up.
+ */
+
+void mca_write_pos(int slot, int reg, unsigned char byte)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return;
+
+	mca_device_write_pos(mca_dev, reg, byte);
+}
+EXPORT_SYMBOL(mca_write_pos);
+
+/**
+ *	mca_set_adapter_name - Set the description of the card
+ *	@slot: slot to name
+ *	@name: text string for the namen
+ *
+ *	This function sets the name reported via /proc for this
+ *	adapter slot. This is for user information only. Setting a
+ *	name deletes any previous name.
+ */
+
+void mca_set_adapter_name(int slot, char* name)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return;
+
+	strncpy(mca_dev->dev.name, name, sizeof(mca_dev->dev.name));
+	mca_dev->dev.name[sizeof(mca_dev->dev.name) - 1] = '\0';
+}
+EXPORT_SYMBOL(mca_set_adapter_name);
+
+/**
+ *	mca_get_adapter_name - get the adapter description
+ *	@slot:	slot to query
+ *
+ *	Return the adapter description if set. If it has not been
+ *	set or the slot is out range then return NULL.
+ */
+
+char *mca_get_adapter_name(int slot)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return NULL;
+
+	return mca_dev->dev.name;
+}
+EXPORT_SYMBOL(mca_get_adapter_name);
+
+/**
+ *	mca_is_adapter_used - check if claimed by driver
+ *	@slot:	slot to check
+ *
+ *	Returns 1 if the slot has been claimed by a driver
+ */
+
+int mca_is_adapter_used(int slot)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return 0;
+
+	return mca_device_claimed(mca_dev);
+}
+EXPORT_SYMBOL(mca_is_adapter_used);
+
+/**
+ *	mca_mark_as_used - claim an MCA device
+ *	@slot:	slot to claim
+ *	FIXME:  should we make this threadsafe
+ *
+ *	Claim an MCA slot for a device driver. If the
+ *	slot is already taken the function returns 1,
+ *	if it is not taken it is claimed and 0 is
+ *	returned.
+ */
+
+int mca_mark_as_used(int slot)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		/* FIXME: this is actually a severe error */
+		return 1;
+
+	if(mca_device_claimed(mca_dev))
+		return 1;
+
+	mca_device_set_claim(mca_dev, 1);
+
+	return 0;
+}
+EXPORT_SYMBOL(mca_mark_as_used);
+
+/**
+ *	mca_mark_as_unused - release an MCA device
+ *	@slot:	slot to claim
+ *
+ *	Release the slot for other drives to use.
+ */
+
+void mca_mark_as_unused(int slot)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return;
+
+	mca_device_set_claim(mca_dev, 0);
+}
+EXPORT_SYMBOL(mca_mark_as_unused);
+
+/**
+ *	mca_isadapter - check if the slot holds an adapter
+ *	@slot:	slot to query
+ *
+ *	Returns zero if the slot does not hold an adapter, non zero if
+ *	it does.
+ */
+
+int mca_isadapter(int slot)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+	enum MCA_AdapterStatus status;
+
+	if(!mca_dev)
+		return 0;
+
+	status = mca_device_status(mca_dev);
+
+	return status == MCA_ADAPTER_NORMAL
+		|| status == MCA_ADAPTER_DISABLED;
+}
+EXPORT_SYMBOL(mca_isadapter);
+
+/**
+ *	mca_isenabled - check if the slot holds an enabled adapter
+ *	@slot:	slot to query
+ *
+ *	Returns a non zero value if the slot holds an enabled adapter
+ *	and zero for any other case.
+ */
+
+int mca_isenabled(int slot)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return 0;
+
+	return mca_device_status(mca_dev) == MCA_ADAPTER_NORMAL;
+}

drivers/mca/mca-proc.c

+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/*
+ * MCA bus support functions for the proc fs.
+ *
+ * NOTE: this code *requires* the legacy MCA api.
+ *
+ * Legacy API means the API that operates in terms of MCA slot number
+ *
+ * (C) 2002 James Bottomley <James.Bottomley@HansenPartnership.com>
+ *
+**-----------------------------------------------------------------------------
+**  
+**  This program is free software; you can redistribute it and/or modify
+**  it under the terms of the GNU General Public License as published by
+**  the Free Software Foundation; either version 2 of the License, or
+**  (at your option) any later version.
+**
+**  This program is distributed in the hope that it will be useful,
+**  but WITHOUT ANY WARRANTY; without even the implied warranty of
+**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+**  GNU General Public License for more details.
+**
+**  You should have received a copy of the GNU General Public License
+**  along with this program; if not, write to the Free Software
+**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/mca.h>
+
+static int get_mca_info_helper(struct mca_device *mca_dev, char *page, int len)
+{
+	int j;
+
+	for(j=0; j<8; j++)
+		len += sprintf(page+len, "%02x ",
+			       mca_dev ? mca_dev->pos[j] : 0xff);
+	len += sprintf(page+len, " %s\n", mca_dev ? mca_dev->dev.name : "");
+	return len;
+}
+
+int get_mca_info(char *page, char **start, off_t off,
+		 int count, int *eof, void *data)
+{
+	int i, len = 0;
+
+	if(MCA_bus) {
+		struct mca_device *mca_dev;
+		/* Format POS registers of eight MCA slots */
+
+		for(i=0; i<MCA_MAX_SLOT_NR; i++) {
+			mca_dev = mca_find_device_by_slot(i);
+
+			len += sprintf(page+len, "Slot %d: ", i+1);
+			len = get_mca_info_helper(mca_dev, page, len);
+		}
+
+		/* Format POS registers of integrated video subsystem */
+
+		mca_dev = mca_find_device_by_slot(MCA_INTEGVIDEO);
+		len += sprintf(page+len, "Video : ");
+		len = get_mca_info_helper(mca_dev, page, len);
+
+		/* Format POS registers of integrated SCSI subsystem */
+
+		mca_dev = mca_find_device_by_slot(MCA_INTEGSCSI);
+		len += sprintf(page+len, "SCSI  : ");
+		len = get_mca_info_helper(mca_dev, page, len);
+
+		/* Format POS registers of motherboard */
+
+		mca_dev = mca_find_device_by_slot(MCA_MOTHERBOARD);
+		len += sprintf(page+len, "Planar: ");
+		len = get_mca_info_helper(mca_dev, page, len);
+	} else {
+		/* Leave it empty if MCA not detected - this should *never*
+		 * happen!
+		 */
+	}
+
+	if (len <= off+count) *eof = 1;
+	*start = page + off;
+	len -= off;
+	if (len>count) len = count;
+	if (len<0) len = 0;
+	return len;
+}
+
+/*--------------------------------------------------------------------*/
+
+static int mca_default_procfn(char* buf, struct mca_device *mca_dev)
+{
+	int len = 0, i;
+	int slot = mca_dev->slot;
+
+	/* Print out the basic information */
+
+	if(slot < MCA_MAX_SLOT_NR) {
+		len += sprintf(buf+len, "Slot: %d\n", slot+1);
+	} else if(slot == MCA_INTEGSCSI) {
+		len += sprintf(buf+len, "Integrated SCSI Adapter\n");
+	} else if(slot == MCA_INTEGVIDEO) {
+		len += sprintf(buf+len, "Integrated Video Adapter\n");
+	} else if(slot == MCA_MOTHERBOARD) {
+		len += sprintf(buf+len, "Motherboard\n");
+	}
+	if(mca_dev->dev.name[0]) {
+
+		/* Drivers might register a name without /proc handler... */
+
+		len += sprintf(buf+len, "Adapter Name: %s\n",
+			       mca_dev->dev.name);
+	} else {
+		len += sprintf(buf+len, "Adapter Name: Unknown\n");
+	}
+	len += sprintf(buf+len, "Id: %02x%02x\n",
+		mca_dev->pos[1], mca_dev->pos[0]);
+	len += sprintf(buf+len, "Enabled: %s\nPOS: ",
+		mca_isenabled(slot) ? "Yes" : "No");
+	for(i=0; i<8; i++) {
+		len += sprintf(buf+len, "%02x ", mca_dev->pos[i]);
+	}
+	len += sprintf(buf+len, "\nDriver Installed: %s",
+		mca_is_adapter_used(slot) ? "Yes" : "No");
+	buf[len++] = '\n';
+	buf[len] = 0;
+
+	return len;
+} /* mca_default_procfn() */
+
+static int get_mca_machine_info(char* page, char **start, off_t off,
+				 int count, int *eof, void *data)
+{
+	int len = 0;
+
+	len += sprintf(page+len, "Model Id: 0x%x\n", machine_id);
+	len += sprintf(page+len, "Submodel Id: 0x%x\n", machine_submodel_id);
+	len += sprintf(page+len, "BIOS Revision: 0x%x\n", BIOS_revision);
+
+	if (len <= off+count) *eof = 1;
+	*start = page + off;
+	len -= off;
+	if (len>count) len = count;
+	if (len<0) len = 0;
+	return len;
+}
+
+static int mca_read_proc(char *page, char **start, off_t off,
+				 int count, int *eof, void *data)
+{
+	struct mca_device *mca_dev = (struct mca_device *)data;
+	int len = 0;
+
+	/* Get the standard info */
+
+	len = mca_default_procfn(page, mca_dev);
+
+	/* Do any device-specific processing, if there is any */
+
+	if(mca_dev->procfn) {
+		len += mca_dev->procfn(page+len, mca_dev->slot,
+				       mca_dev->proc_dev);
+	}
+	if (len <= off+count) *eof = 1;
+	*start = page + off;
+	len -= off;
+	if (len>count) len = count;
+	if (len<0) len = 0;
+	return len;
+} /* mca_read_proc() */
+
+/*--------------------------------------------------------------------*/
+
+void __init mca_do_proc_init(void)
+{
+	int i;
+	struct proc_dir_entry *proc_mca;
+	struct proc_dir_entry* node = NULL;
+	struct mca_device *mca_dev;
+
+	proc_mca = proc_mkdir("mca", &proc_root);
+	create_proc_read_entry("pos",0,proc_mca,get_mca_info,NULL);
+	create_proc_read_entry("machine",0,proc_mca,get_mca_machine_info,NULL);
+
+	/* Initialize /proc/mca entries for existing adapters */
+
+	for(i = 0; i < MCA_NUMADAPTERS; i++) {
+		mca_dev = mca_find_device_by_slot(i);
+		if(!mca_dev)
+			continue;
+
+		mca_dev->procfn = NULL;
+
+		if(i < MCA_MAX_SLOT_NR) sprintf(mca_dev->procname,"slot%d", i+1);
+		else if(i == MCA_INTEGVIDEO) sprintf(mca_dev->procname,"video");
+		else if(i == MCA_INTEGSCSI) sprintf(mca_dev->procname,"scsi");
+		else if(i == MCA_MOTHERBOARD) sprintf(mca_dev->procname,"planar");
+
+		if(!mca_isadapter(i)) continue;
+
+		node = create_proc_read_entry(mca_dev->procname, 0, proc_mca,
+					      mca_read_proc, (void *)mca_dev);
+
+		if(node == NULL) {
+			printk("Failed to allocate memory for MCA proc-entries!");
+			return;
+		}
+	}
+
+} /* mca_do_proc_init() */
+
+/**
+ *	mca_set_adapter_procfn - Set the /proc callback
+ *	@slot: slot to configure
+ *	@procfn: callback function to call for /proc
+ *	@dev: device information passed to the callback
+ *
+ *	This sets up an information callback for /proc/mca/slot?.  The
+ *	function is called with the buffer, slot, and device pointer (or
+ *	some equally informative context information, or nothing, if you
+ *	prefer), and is expected to put useful information into the
+ *	buffer.  The adapter name, ID, and POS registers get printed
+ *	before this is called though, so don't do it again.
+ *
+ *	This should be called with a %NULL @procfn when a module
+ *	unregisters, thus preventing kernel crashes and other such
+ *	nastiness.
+ */
+
+void mca_set_adapter_procfn(int slot, MCA_ProcFn procfn, void* proc_dev)
+{
+	struct mca_device *mca_dev = mca_find_device_by_slot(slot);
+
+	if(!mca_dev)
+		return;
+
+	mca_dev->procfn = procfn;
+	mca_dev->proc_dev = proc_dev;
+}
+EXPORT_SYMBOL(mca_set_adapter_procfn);

include/asm-i386/mca.h

+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Platform specific MCA defines */
+#ifndef _ASM_MCA_H
+#define _ASM_MCA_H
+
+/* Maximal number of MCA slots - actually, some machines have less, but
+ * they all have sufficient number of POS registers to cover 8.
+ */
+#define MCA_MAX_SLOT_NR  8
+
+/* Most machines have only one MCA bus.  The only multiple bus machines
+ * I know have at most two */
+#define MAX_MCA_BUSSES 2
+
+#define MCA_PRIMARY_BUS		0
+#define MCA_SECONDARY_BUS	1
+
+/* Dummy slot numbers on primary MCA for integrated functions */
+#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
+#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)
+#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
+
+/* Dummy POS values for integrated functions */
+#define MCA_DUMMY_POS_START	0x10000
+#define MCA_INTEGSCSI_POS	(MCA_DUMMY_POS_START+1)
+#define MCA_INTEGVIDEO_POS	(MCA_DUMMY_POS_START+2)
+#define MCA_MOTHERBOARD_POS	(MCA_DUMMY_POS_START+3)
+
+/* MCA registers */
+
+#define MCA_MOTHERBOARD_SETUP_REG	0x94
+#define MCA_ADAPTER_SETUP_REG		0x96
+#define MCA_POS_REG(n)			(0x100+(n))
+
+#define MCA_ENABLED	0x01	/* POS 2, set if adapter enabled */
+
+/* Max number of adapters, including both slots and various integrated
+ * things.
+ */
+#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
+
+/* lock to protect access to the MCA registers */
+extern spinlock_t mca_lock;
+
+#endif

include/linux/mca-legacy.h

+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* This is the function prototypes for the old legacy MCA interface
+ *
+ * Please move your driver to the new sysfs based one instead */
+
+#ifndef _LINUX_MCA_LEGACY_H
+#define _LINUX_MCA_LEGACY_H
+
+/* MCA_NOTFOUND is an error condition.  The other two indicate
+ * motherboard POS registers contain the adapter.  They might be
+ * returned by the mca_find_adapter() function, and can be used as
+ * arguments to mca_read_stored_pos().  I'm not going to allow direct
+ * access to the motherboard registers until we run across an adapter
+ * that requires it.  We don't know enough about them to know if it's
+ * safe.
+ *
+ * See Documentation/mca.txt or one of the existing drivers for
+ * more information.
+ */
+#define MCA_NOTFOUND	(-1)
+
+
+
+/* Returns the slot of the first enabled adapter matching id.  User can
+ * specify a starting slot beyond zero, to deal with detecting multiple
+ * devices.  Returns MCA_NOTFOUND if id not found.  Also checks the
+ * integrated adapters.
+ */
+extern int mca_find_adapter(int id, int start);
+extern int mca_find_unused_adapter(int id, int start);
+
+/* adapter state info - returns 0 if no */
+extern int mca_isadapter(int slot);
+extern int mca_isenabled(int slot);
+
+extern int mca_is_adapter_used(int slot);
+extern int mca_mark_as_used(int slot);
+extern void mca_mark_as_unused(int slot);
+
+/* gets a byte out of POS register (stored in memory) */
+extern unsigned char mca_read_stored_pos(int slot, int reg);
+
+/* This can be expanded later.  Right now, it gives us a way of
+ * getting meaningful information into the MCA_info structure,
+ * so we can have a more interesting /proc/mca.
+ */
+extern void mca_set_adapter_name(int slot, char* name);
+extern char* mca_get_adapter_name(int slot);
+
+/* These routines actually mess with the hardware POS registers.  They
+ * temporarily disable the device (and interrupts), so make sure you know
+ * what you're doing if you use them.  Furthermore, writing to a POS may
+ * result in two devices trying to share a resource, which in turn can
+ * result in multiple devices sharing memory spaces, IRQs, or even trashing
+ * hardware.  YOU HAVE BEEN WARNED.
+ *
+ * You can only access slots with this.  Motherboard registers are off
+ * limits.
+ */
+
+/* read a byte from the specified POS register. */
+extern unsigned char mca_read_pos(int slot, int reg);
+
+/* write a byte to the specified POS register. */
+extern void mca_write_pos(int slot, int reg, unsigned char byte);
+
+#ifdef CONFIG_PROC_FS
+extern void mca_do_proc_init(void);
+extern void mca_set_adapter_procfn(int slot, MCA_ProcFn, void* dev);
+#else
+static inline void mca_do_proc_init(void)
+{
+}
+
+static inline void mca_set_adapter_procfn(int slot, MCA_ProcFn *fn, void* dev)
+{
+}
+#endif
+
+#endif

include/linux/mca.h

@@ -6,6 +6,14 @@
 #ifndef _LINUX_MCA_H
 #define _LINUX_MCA_H
 
+/* FIXME: This shouldn't happen, but we need everything that previously
+ * included mca.h to compile.  Take it out later when the MCA #includes
+ * are sorted out */
+#include <linux/device.h>
+
+/* get the platform specific defines */
+#include <asm/mca.h>
+
 /* The detection of MCA bus is done in the real mode (using BIOS).
  * The information is exported to the protected code, where this
  * variable is set to one in case MCA bus was detected.
@@ -14,58 +22,6 @@
 extern int  MCA_bus;
 #endif
 
-/* Maximal number of MCA slots - actually, some machines have less, but
- * they all have sufficient number of POS registers to cover 8.
- */
-#define MCA_MAX_SLOT_NR  8
-
-/* MCA_NOTFOUND is an error condition.  The other two indicate
- * motherboard POS registers contain the adapter.  They might be
- * returned by the mca_find_adapter() function, and can be used as
- * arguments to mca_read_stored_pos().  I'm not going to allow direct
- * access to the motherboard registers until we run across an adapter
- * that requires it.  We don't know enough about them to know if it's
- * safe.
- *
- * See Documentation/mca.txt or one of the existing drivers for
- * more information.
- */
-#define MCA_NOTFOUND	(-1)
-#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
-#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)
-#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
-
-/* Max number of adapters, including both slots and various integrated
- * things.
- */
-#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
-
-/* Returns the slot of the first enabled adapter matching id.  User can
- * specify a starting slot beyond zero, to deal with detecting multiple
- * devices.  Returns MCA_NOTFOUND if id not found.  Also checks the
- * integrated adapters.
- */
-extern int mca_find_adapter(int id, int start);
-extern int mca_find_unused_adapter(int id, int start);
-
-/* adapter state info - returns 0 if no */
-extern int mca_isadapter(int slot);
-extern int mca_isenabled(int slot);
-
-extern int mca_is_adapter_used(int slot);
-extern int mca_mark_as_used(int slot);
-extern void mca_mark_as_unused(int slot);
-
-/* gets a byte out of POS register (stored in memory) */
-extern unsigned char mca_read_stored_pos(int slot, int reg);
-
-/* This can be expanded later.  Right now, it gives us a way of
- * getting meaningful information into the MCA_info structure,
- * so we can have a more interesting /proc/mca.
- */
-extern void mca_set_adapter_name(int slot, char* name);
-extern char* mca_get_adapter_name(int slot);
-
 /* This sets up an information callback for /proc/mca/slot?.  The
  * function is called with the buffer, slot, and device pointer (or
  * some equally informative context information, or nothing, if you
@@ -78,28 +34,94 @@ extern char* mca_get_adapter_name(int slot);
  * nastiness.
  */
 typedef int (*MCA_ProcFn)(char* buf, int slot, void* dev);
-extern void mca_set_adapter_procfn(int slot, MCA_ProcFn, void* dev);
-
-/* These routines actually mess with the hardware POS registers.  They
- * temporarily disable the device (and interrupts), so make sure you know
- * what you're doing if you use them.  Furthermore, writing to a POS may
- * result in two devices trying to share a resource, which in turn can
- * result in multiple devices sharing memory spaces, IRQs, or even trashing
- * hardware.  YOU HAVE BEEN WARNED.
- *
- * You can only access slots with this.  Motherboard registers are off
- * limits.
- */
-
-/* read a byte from the specified POS register. */
-extern unsigned char mca_read_pos(int slot, int reg);
-
-/* write a byte to the specified POS register. */
-extern void mca_write_pos(int slot, int reg, unsigned char byte);
 
 /* Should only be called by the NMI interrupt handler, this will do some
  * fancy stuff to figure out what might have generated a NMI.
  */
 extern void mca_handle_nmi(void);
 
+enum MCA_AdapterStatus {
+	MCA_ADAPTER_NORMAL = 0,
+	MCA_ADAPTER_NONE = 1,
+	MCA_ADAPTER_DISABLED = 2,
+	MCA_ADAPTER_ERROR = 3
+};
+
+struct mca_device {
+	u64			dma_mask;
+	int			pos_id;
+	int			slot;
+
+	/* is there a driver installed? 0 - No, 1 - Yes */
+	int			driver_loaded;
+	/* POS registers */
+	unsigned char		pos[8];
+	/* if a pseudo adapter of the motherboard, this is the motherboard
+	 * register value to use for setup cycles */
+	short			pos_register;
+	
+	enum MCA_AdapterStatus	status;
+#ifdef CONFIG_PROC_FS
+	/* name of the proc/mca file */
+	char			procname[8];
+	/* /proc info callback */
+	MCA_ProcFn		procfn;
+	/* device/context info for proc callback */
+	void			*proc_dev;
+#endif
+	struct device		dev;
+};
+#define to_mca_device(mdev) container_of(mdev, struct mca_device, dev)
+
+struct mca_bus_accessor_functions {
+	unsigned char	(*mca_read_pos)(struct mca_device *, int reg);
+	void		(*mca_write_pos)(struct mca_device *, int reg,
+					 unsigned char byte);
+	int		(*mca_transform_irq)(struct mca_device *, int irq);
+	int		(*mca_transform_ioport)(struct mca_device *,
+						  int region);
+	void *		(*mca_transform_memory)(struct mca_device *,
+						void *memory);
+};
+
+struct mca_bus {
+	u64			default_dma_mask;
+	int			number;
+	struct mca_bus_accessor_functions f;
+	struct device		dev;
+};
+#define to_mca_bus(mdev) container_of(mdev, struct mca_bus, dev)
+
+struct mca_driver {
+	const short		*id_table;
+	struct device_driver	driver;
+};
+#define to_mca_driver(mdriver) container_of(mdriver, struct mca_driver, driver)
+
+/* Ongoing supported API functions */
+extern int mca_driver_register(struct mca_driver *);
+extern int mca_register_device(int bus, struct mca_device *);
+extern struct mca_device *mca_find_device_by_slot(int slot);
+extern int mca_system_init(void);
+extern struct mca_bus *mca_attach_bus(int);
+
+extern unsigned char mca_device_read_stored_pos(struct mca_device *mca_dev,
+						int reg);
+extern unsigned char mca_device_read_pos(struct mca_device *mca_dev, int reg);
+extern void mca_device_write_pos(struct mca_device *mca_dev, int reg,
+				 unsigned char byte);
+extern int mca_device_transform_irq(struct mca_device *mca_dev, int irq);
+extern int mca_device_transform_ioport(struct mca_device *mca_dev, int port);
+extern void *mca_device_transform_memory(struct mca_device *mca_dev,
+					 void *mem);
+extern int mca_device_claimed(struct mca_device *mca_dev);
+extern void mca_device_set_claim(struct mca_device *mca_dev, int val);
+extern enum MCA_AdapterStatus mca_device_status(struct mca_device *mca_dev);
+
+extern struct bus_type mca_bus_type;
+
+/* for now, include the legacy API */
+#include <linux/mca-legacy.h>
+
+
 #endif /* _LINUX_MCA_H */