Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-03-12

This series contains updates to ixgbe and ixgbevf only.

Shannon Nelson provides three fixes to the ipsec portion of ixgbe.  Make
sure we are using 128-bit authentication, since it is the only size
supported for hardware offload.  Fixed the transmit trailer length
calculation for ipsec by finding the padding value and adding it to the
authentication length, then save it off so that we can put it in the
transmit descriptor to tell the device where to stop the checksum
calculation.  Lastly, cleaned up useless and dead code.

Tonghao Zhang adds a ethtool stat for receive length errors, since the
driver was already collecting this counter.

Arnd Bergmann fixed a warning about an used variable by "rephrasing" the
code so that the compiler can see the use of the variable in question.

Paul fixes an issue where "HIDE_VLAN" was being cleared on VF reset, so
ensure to set "HIDE_VLAN" when port VLAN is enabled after a VF reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -97,6 +97,7 @@ static const struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"tx_heartbeat_errors", IXGBE_NETDEV_STAT(tx_heartbeat_errors)},
 	{"tx_timeout_count", IXGBE_STAT(tx_timeout_count)},
 	{"tx_restart_queue", IXGBE_STAT(restart_queue)},
+	{"rx_length_errors", IXGBE_STAT(stats.rlec)},
 	{"rx_long_length_errors", IXGBE_STAT(stats.roc)},
 	{"rx_short_length_errors", IXGBE_STAT(stats.ruc)},
 	{"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)},

drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c

@@ -423,15 +423,21 @@ static int ixgbe_ipsec_parse_proto_keys(struct xfrm_state *xs,
 	const char aes_gcm_name[] = "rfc4106(gcm(aes))";
 	int key_len;
 
-	if (xs->aead) {
-		key_data = &xs->aead->alg_key[0];
-		key_len = xs->aead->alg_key_len;
-		alg_name = xs->aead->alg_name;
-	} else {
+	if (!xs->aead) {
 		netdev_err(dev, "Unsupported IPsec algorithm\n");
 		return -EINVAL;
 	}
 
+	if (xs->aead->alg_icv_len != IXGBE_IPSEC_AUTH_BITS) {
+		netdev_err(dev, "IPsec offload requires %d bit authentication\n",
+			   IXGBE_IPSEC_AUTH_BITS);
+		return -EINVAL;
+	}
+
+	key_data = &xs->aead->alg_key[0];
+	key_len = xs->aead->alg_key_len;
+	alg_name = xs->aead->alg_name;
+
 	if (strcmp(alg_name, aes_gcm_name)) {
 		netdev_err(dev, "Unsupported IPsec algorithm - please use %s\n",
 			   aes_gcm_name);
@@ -718,23 +724,10 @@ static bool ixgbe_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs)
 	return true;
 }
 
-/**
- * ixgbe_ipsec_free - called by xfrm garbage collections
- * @xs: pointer to transformer state struct
- *
- * We don't have any garbage to collect, so we shouldn't bother
- * implementing this function, but the XFRM code doesn't check for
- * existence before calling the API callback.
- **/
-static void ixgbe_ipsec_free(struct xfrm_state *xs)
-{
-}
-
 static const struct xfrmdev_ops ixgbe_xfrmdev_ops = {
 	.xdo_dev_state_add = ixgbe_ipsec_add_sa,
 	.xdo_dev_state_delete = ixgbe_ipsec_del_sa,
 	.xdo_dev_offload_ok = ixgbe_ipsec_offload_ok,
-	.xdo_dev_state_free = ixgbe_ipsec_free,
 };
 
 /**
@@ -783,11 +776,33 @@ int ixgbe_ipsec_tx(struct ixgbe_ring *tx_ring,
 
 	itd->flags = 0;
 	if (xs->id.proto == IPPROTO_ESP) {
+		struct sk_buff *skb = first->skb;
+		int ret, authlen, trailerlen;
+		u8 padlen;
+
 		itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP |
 			      IXGBE_ADVTXD_TUCMD_L4T_TCP;
 		if (first->protocol == htons(ETH_P_IP))
 			itd->flags |= IXGBE_ADVTXD_TUCMD_IPV4;
-		itd->trailer_len = xs->props.trailer_len;
+
+		/* The actual trailer length is authlen (16 bytes) plus
+		 * 2 bytes for the proto and the padlen values, plus
+		 * padlen bytes of padding.  This ends up not the same
+		 * as the static value found in xs->props.trailer_len (21).
+		 *
+		 * The "correct" way to get the auth length would be to use
+		 *    authlen = crypto_aead_authsize(xs->data);
+		 * but since we know we only have one size to worry about
+		 * we can let the compiler use the constant and save us a
+		 * few CPU cycles.
+		 */
+		authlen = IXGBE_IPSEC_AUTH_BITS / 8;
+
+		ret = skb_copy_bits(skb, skb->len - (authlen + 2), &padlen, 1);
+		if (unlikely(ret))
+			return 0;
+		trailerlen = authlen + 2 + padlen;
+		itd->trailer_len = trailerlen;
 	}
 	if (tsa->encrypt)
 		itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN;

drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h

@@ -32,6 +32,7 @@
 #define IXGBE_IPSEC_MAX_RX_IP_COUNT	128
 #define IXGBE_IPSEC_BASE_RX_INDEX	0
 #define IXGBE_IPSEC_BASE_TX_INDEX	IXGBE_IPSEC_MAX_SA_COUNT
+#define IXGBE_IPSEC_AUTH_BITS		128
 
 #define IXGBE_RXTXIDX_IPS_EN		0x00000001
 #define IXGBE_RXIDX_TBL_SHIFT		1

drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c

@@ -831,7 +831,11 @@ static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
 
 	/* force drop enable for all VF Rx queues */
-	ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
+	reg = IXGBE_QDE_ENABLE;
+	if (adapter->vfinfo[vf].pf_vlan)
+		reg |= IXGBE_QDE_HIDE_VLAN;
+
+	ixgbe_write_qde(adapter, vf, reg);
 
 	/* enable receive for vf */
 	reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

@@ -1766,12 +1766,12 @@ static void ixgbevf_set_rx_buffer_len(struct ixgbevf_adapter *adapter,
 
 	set_ring_build_skb_enabled(rx_ring);
 
-#if (PAGE_SIZE < 8192)
+	if (PAGE_SIZE < 8192) {
 		if (max_frame <= IXGBEVF_MAX_FRAME_BUILD_SKB)
 			return;
 
 		set_ring_uses_large_buffer(rx_ring);
-#endif
+	}
 }
 
 /**