Commit 8439e0df authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] anysee: add support for Anysee E7 PTC

Basically it is just same device as Anysee E7 TC but made for
internal PCI(e) slot and motherboard USB connector.

Cc: info@anysee.com
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 798ae150
...@@ -419,6 +419,21 @@ static struct isl6423_config anysee_isl6423_config = { ...@@ -419,6 +419,21 @@ static struct isl6423_config anysee_isl6423_config = {
* IOA[7] TS 1=enabled * IOA[7] TS 1=enabled
* IOE[5] STV0903 1=enabled * IOE[5] STV0903 1=enabled
* *
* E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
* PCB: 508PTC (rev0.5)
* parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
* OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
* IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
* IOA[7] TS 1=enabled
* IOE[4] TDA18212 1=enabled
* DVB-C:
* IOD[6] ZL10353 0=disabled
* IOD[5] TDA10023 1=enabled
* IOE[0] IF 1=enabled
* DVB-T:
* IOD[5] TDA10023 0=disabled
* IOD[6] ZL10353 1=enabled
* IOE[0] IF 0=enabled
*/ */
static int anysee_frontend_attach(struct dvb_usb_adapter *adap) static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
...@@ -593,7 +608,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) ...@@ -593,7 +608,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
break; break;
case ANYSEE_HW_508TC: /* 18 */ case ANYSEE_HW_508TC: /* 18 */
case ANYSEE_HW_508PTC: /* 21 */
/* E7 TC */ /* E7 TC */
/* E7 PTC */
/* enable transport stream on IOA[7] */ /* enable transport stream on IOA[7] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
...@@ -762,7 +779,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) ...@@ -762,7 +779,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
break; break;
case ANYSEE_HW_508TC: /* 18 */ case ANYSEE_HW_508TC: /* 18 */
case ANYSEE_HW_508PTC: /* 21 */
/* E7 TC */ /* E7 TC */
/* E7 PTC */
/* enable tuner on IOE[4] */ /* enable tuner on IOE[4] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
......
...@@ -61,13 +61,14 @@ struct anysee_state { ...@@ -61,13 +61,14 @@ struct anysee_state {
u8 seq; u8 seq;
}; };
#define ANYSEE_HW_02 2 /* E30 */ #define ANYSEE_HW_02 2 /* E30 */
#define ANYSEE_HW_507CD 6 /* E30 Plus */ #define ANYSEE_HW_507CD 6 /* E30 Plus */
#define ANYSEE_HW_507DC 10 /* E30 C Plus */ #define ANYSEE_HW_507DC 10 /* E30 C Plus */
#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ #define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ #define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
#define ANYSEE_HW_508TC 18 /* E7 TC */ #define ANYSEE_HW_508TC 18 /* E7 TC */
#define ANYSEE_HW_508S2 19 /* E7 S2 */ #define ANYSEE_HW_508S2 19 /* E7 S2 */
#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
#define REG_IOA 0x80 /* Port A (bit addressable) */ #define REG_IOA 0x80 /* Port A (bit addressable) */
#define REG_IOB 0x90 /* Port B (bit addressable) */ #define REG_IOB 0x90 /* Port B (bit addressable) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment