Commit 849c4542 authored by Emil Tantilov's avatar Emil Tantilov Committed by David S. Miller

ixgbe: Use netdev_<level>, dev_<level>, pr_<level>

This patch is alternative to a previous patch submitted by Joe Perches.

Create common macros e_<level> and e_dev_<level> that use netdev_<level> and
dev_<level> similar to e1000e.
Redefined pr_fmt for driver messages.
Use %pM to display MAC address.
Aligned text to better match the new format.

CC: Joe Perches <joe@perches.com>
Signed-off-by: default avatarEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent faa9dcf7
......@@ -44,11 +44,9 @@
#include <linux/dca.h>
#endif
#define PFX "ixgbe: "
#define DPRINTK(nlevel, klevel, fmt, args...) \
((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
__func__ , ## args)))
/* common prefix used by pr_<> macros */
#undef pr_fmt
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
/* TX/RX descriptor defines */
#define IXGBE_DEFAULT_TXD 512
......
......@@ -707,9 +707,8 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
out:
if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
netif_info(adapter, hw, adapter->netdev, "Smartspeed has"
" downgraded the link speed from the maximum"
" advertised\n");
e_info("Smartspeed has downgraded the link speed from "
"the maximum advertised\n");
return status;
}
......
......@@ -105,12 +105,26 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
#ifdef DEBUG
extern char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw);
extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw);
#define hw_dbg(hw, format, arg...) \
printk(KERN_DEBUG "%s: " format, ixgbe_get_hw_dev_name(hw), ##arg)
#else
#define hw_dbg(hw, format, arg...) do {} while (0)
#endif
netdev_dbg(ixgbe_get_hw_dev(hw), format, ##arg)
#define e_err(format, arg...) \
netdev_err(adapter->netdev, format, ## arg)
#define e_info(format, arg...) \
netdev_info(adapter->netdev, format, ## arg)
#define e_warn(format, arg...) \
netdev_warn(adapter->netdev, format, ## arg)
#define e_notice(format, arg...) \
netdev_notice(adapter->netdev, format, ## arg)
#define e_crit(format, arg...) \
netdev_crit(adapter->netdev, format, ## arg)
#define e_dev_info(format, arg...) \
dev_info(&adapter->pdev->dev, format, ## arg)
#define e_dev_warn(format, arg...) \
dev_warn(&adapter->pdev->dev, format, ## arg)
#define e_dev_err(format, arg...) \
dev_err(&adapter->pdev->dev, format, ## arg)
#define e_dev_notice(format, arg...) \
dev_notice(&adapter->pdev->dev, format, ## arg)
#endif /* IXGBE_COMMON */
......@@ -121,7 +121,7 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
goto out;
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
DPRINTK(DRV, ERR, "Enable failed, needs MSI-X\n");
e_err("Enable failed, needs MSI-X\n");
err = 1;
goto out;
}
......
......@@ -294,8 +294,7 @@ static int ixgbe_set_settings(struct net_device *netdev,
hw->mac.autotry_restart = true;
err = hw->mac.ops.setup_link(hw, advertised, true, true);
if (err) {
DPRINTK(PROBE, INFO,
"setup link failed with code %d\n", err);
e_info("setup link failed with code %d\n", err);
hw->mac.ops.setup_link(hw, old, true, true);
}
} else {
......@@ -1188,7 +1187,7 @@ static struct ixgbe_reg_test reg_test_82598[] = {
writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if (val != (_test[pat] & W & M)) { \
DPRINTK(DRV, ERR, "pattern test reg %04X failed: got "\
e_err("pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
R, val, (_test[pat] & W & M)); \
*data = R; \
......@@ -1206,7 +1205,7 @@ static struct ixgbe_reg_test reg_test_82598[] = {
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
e_err("set/check reg %04X test failed: got 0x%08X " \
"expected 0x%08X\n", R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
......@@ -1240,8 +1239,8 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
if (value != after) {
DPRINTK(DRV, ERR, "failed STATUS register test got: "
"0x%08X expected: 0x%08X\n", after, value);
e_err("failed STATUS register test got: 0x%08X expected: "
"0x%08X\n", after, value);
*data = 1;
return 1;
}
......@@ -1341,8 +1340,8 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
*data = 1;
return -1;
}
DPRINTK(HW, INFO, "testing %s interrupt\n",
(shared_int ? "shared" : "unshared"));
e_info("testing %s interrupt\n", shared_int ?
"shared" : "unshared");
/* Disable all the interrupts */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
......@@ -1847,7 +1846,7 @@ static void ixgbe_diag_test(struct net_device *netdev,
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
DPRINTK(HW, INFO, "offline testing starting\n");
e_info("offline testing starting\n");
/* Link test performed before hardware reset so autoneg doesn't
* interfere with test result */
......@@ -1880,17 +1879,17 @@ static void ixgbe_diag_test(struct net_device *netdev,
else
ixgbe_reset(adapter);
DPRINTK(HW, INFO, "register testing starting\n");
e_info("register testing starting\n");
if (ixgbe_reg_test(adapter, &data[0]))
eth_test->flags |= ETH_TEST_FL_FAILED;
ixgbe_reset(adapter);
DPRINTK(HW, INFO, "eeprom testing starting\n");
e_info("eeprom testing starting\n");
if (ixgbe_eeprom_test(adapter, &data[1]))
eth_test->flags |= ETH_TEST_FL_FAILED;
ixgbe_reset(adapter);
DPRINTK(HW, INFO, "interrupt testing starting\n");
e_info("interrupt testing starting\n");
if (ixgbe_intr_test(adapter, &data[2]))
eth_test->flags |= ETH_TEST_FL_FAILED;
......@@ -1898,14 +1897,13 @@ static void ixgbe_diag_test(struct net_device *netdev,
* loopback diagnostic. */
if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
IXGBE_FLAG_VMDQ_ENABLED)) {
DPRINTK(HW, INFO, "Skip MAC loopback diagnostic in VT "
"mode\n");
e_info("Skip MAC loopback diagnostic in VT mode\n");
data[3] = 0;
goto skip_loopback;
}
ixgbe_reset(adapter);
DPRINTK(HW, INFO, "loopback testing starting\n");
e_info("loopback testing starting\n");
if (ixgbe_loopback_test(adapter, &data[3]))
eth_test->flags |= ETH_TEST_FL_FAILED;
......@@ -1916,7 +1914,7 @@ static void ixgbe_diag_test(struct net_device *netdev,
if (if_running)
dev_open(netdev);
} else {
DPRINTK(HW, INFO, "online testing starting\n");
e_info("online testing starting\n");
/* Online tests */
if (ixgbe_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
......@@ -2089,7 +2087,7 @@ static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter,
(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
adapter->netdev->features |= NETIF_F_LRO;
DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n",
e_info("rx-usecs set to %d, re-enabling RSC\n",
ec->rx_coalesce_usecs);
return true;
}
......@@ -2158,8 +2156,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
netdev->features &= ~NETIF_F_LRO;
DPRINTK(PROBE, INFO,
"rx-usecs set to 0, disabling RSC\n");
e_info("rx-usecs set to 0, disabling RSC\n");
need_reset = true;
}
......
......@@ -25,7 +25,6 @@
*******************************************************************************/
#include "ixgbe.h"
#ifdef CONFIG_IXGBE_DCB
#include "ixgbe_dcb_82599.h"
......@@ -165,19 +164,19 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
adapter = netdev_priv(netdev);
if (xid >= IXGBE_FCOE_DDP_MAX) {
DPRINTK(DRV, WARNING, "xid=0x%x out-of-range\n", xid);
e_warn("xid=0x%x out-of-range\n", xid);
return 0;
}
fcoe = &adapter->fcoe;
if (!fcoe->pool) {
DPRINTK(DRV, WARNING, "xid=0x%x no ddp pool for fcoe\n", xid);
e_warn("xid=0x%x no ddp pool for fcoe\n", xid);
return 0;
}
ddp = &fcoe->ddp[xid];
if (ddp->sgl) {
DPRINTK(DRV, ERR, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
e_err("xid 0x%x w/ non-null sgl=%p nents=%d\n",
xid, ddp->sgl, ddp->sgc);
return 0;
}
......@@ -186,14 +185,14 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
/* setup dma from scsi command sgl */
dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
if (dmacount == 0) {
DPRINTK(DRV, ERR, "xid 0x%x DMA map error\n", xid);
e_err("xid 0x%x DMA map error\n", xid);
return 0;
}
/* alloc the udl from our ddp pool */
ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp);
if (!ddp->udl) {
DPRINTK(DRV, ERR, "failed allocated ddp context\n");
e_err("failed allocated ddp context\n");
goto out_noddp_unmap;
}
ddp->sgl = sgl;
......@@ -206,8 +205,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
while (len) {
/* max number of buffers allowed in one DDP context */
if (j >= IXGBE_BUFFCNT_MAX) {
netif_err(adapter, drv, adapter->netdev,
"xid=%x:%d,%d,%d:addr=%llx "
e_err("xid=%x:%d,%d,%d:addr=%llx "
"not enough descriptors\n",
xid, i, j, dmacount, (u64)addr);
goto out_noddp_free;
......@@ -387,7 +385,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
struct fc_frame_header *fh;
if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
DPRINTK(DRV, ERR, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
e_err("Wrong gso type %d:expecting SKB_GSO_FCOE\n",
skb_shinfo(skb)->gso_type);
return -EINVAL;
}
......@@ -414,7 +412,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
break;
default:
DPRINTK(DRV, WARNING, "unknown sof = 0x%x\n", sof);
e_warn("unknown sof = 0x%x\n", sof);
return -EINVAL;
}
......@@ -441,7 +439,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
break;
default:
DPRINTK(DRV, WARNING, "unknown eof = 0x%x\n", eof);
e_warn("unknown eof = 0x%x\n", eof);
return -EINVAL;
}
......@@ -517,8 +515,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
adapter->pdev, IXGBE_FCPTR_MAX,
IXGBE_FCPTR_ALIGN, PAGE_SIZE);
if (!fcoe->pool)
DPRINTK(DRV, ERR,
"failed to allocated FCoE DDP pool\n");
e_err("failed to allocated FCoE DDP pool\n");
spin_lock_init(&fcoe->lock);
}
......@@ -614,7 +611,7 @@ int ixgbe_fcoe_enable(struct net_device *netdev)
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
goto out_enable;
DPRINTK(DRV, INFO, "Enabling FCoE offload features.\n");
e_info("Enabling FCoE offload features.\n");
if (netif_running(netdev))
netdev->netdev_ops->ndo_stop(netdev);
......@@ -660,7 +657,7 @@ int ixgbe_fcoe_disable(struct net_device *netdev)
if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
goto out_disable;
DPRINTK(DRV, INFO, "Disabling FCoE offload features.\n");
e_info("Disabling FCoE offload features.\n");
if (netif_running(netdev))
netdev->netdev_ops->ndo_stop(netdev);
......
This diff is collapsed.
......@@ -25,7 +25,6 @@
*******************************************************************************/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
......@@ -174,7 +173,7 @@ int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
adapter->vfinfo[vf].rar = hw->mac.ops.set_rar(hw, vf + 1, mac_addr,
vf, IXGBE_RAH_AV);
if (adapter->vfinfo[vf].rar < 0) {
DPRINTK(DRV, ERR, "Could not set MAC Filter for VF %d\n", vf);
e_err("Could not set MAC Filter for VF %d\n", vf);
return -1;
}
......@@ -194,11 +193,7 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
if (enable) {
random_ether_addr(vf_mac_addr);
DPRINTK(PROBE, INFO, "IOV: VF %d is enabled "
"mac %02X:%02X:%02X:%02X:%02X:%02X\n",
vfn,
vf_mac_addr[0], vf_mac_addr[1], vf_mac_addr[2],
vf_mac_addr[3], vf_mac_addr[4], vf_mac_addr[5]);
e_info("IOV: VF %d is enabled MAC %pM\n", vfn, vf_mac_addr);
/*
* Store away the VF "permananet" MAC address, it will ask
* for it later.
......@@ -243,7 +238,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
if (retval)
printk(KERN_ERR "Error receiving message from VF\n");
pr_err("Error receiving message from VF\n");
/* this is a message we already processed, do nothing */
if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
......@@ -257,7 +252,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
if (msgbuf[0] == IXGBE_VF_RESET) {
unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
u8 *addr = (u8 *)(&msgbuf[1]);
DPRINTK(PROBE, INFO, "VF Reset msg received from vf %d\n", vf);
e_info("VF Reset msg received from vf %d\n", vf);
adapter->vfinfo[vf].clear_to_send = false;
ixgbe_vf_reset_msg(adapter, vf);
adapter->vfinfo[vf].clear_to_send = true;
......@@ -310,7 +305,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
break;
default:
DPRINTK(DRV, ERR, "Unhandled Msg %8.8x\n", msgbuf[0]);
e_err("Unhandled Msg %8.8x\n", msgbuf[0]);
retval = IXGBE_ERR_MBX;
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment