UBI: amend commentaries

Hch asked not to use "unit" for sub-systems, let it be so.
Also some other commentaries modifications.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

drivers/mtd/ubi/build.c

@@ -524,7 +524,7 @@ static int attach_by_scanning(struct ubi_device *ubi)
 }
 
 /**
- * io_init - initialize I/O unit for a given UBI device.
+ * io_init - initialize I/O sub-system for a given UBI device.
  * @ubi: UBI device description object
  *
  * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are

drivers/mtd/ubi/debug.h

@@ -76,21 +76,21 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 #endif /* CONFIG_MTD_UBI_DEBUG_MSG */
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
-/* Messages from the eraseblock association unit */
+/* Messages from the eraseblock association sub-system */
 #define dbg_eba(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_eba(fmt, ...) ({})
 #endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
-/* Messages from the wear-leveling unit */
+/* Messages from the wear-leveling sub-system */
 #define dbg_wl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_wl(fmt, ...) ({})
 #endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
-/* Messages from the input/output unit */
+/* Messages from the input/output sub-system */
 #define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_io(fmt, ...) ({})

drivers/mtd/ubi/eba.c

@@ -19,20 +19,20 @@
  */
 
 /*
- * The UBI Eraseblock Association (EBA) unit.
+ * The UBI Eraseblock Association (EBA) sub-system.
  *
- * This unit is responsible for I/O to/from logical eraseblock.
+ * This sub-system is responsible for I/O to/from logical eraseblock.
  *
  * Although in this implementation the EBA table is fully kept and managed in
  * RAM, which assumes poor scalability, it might be (partially) maintained on
  * flash in future implementations.
  *
- * The EBA unit implements per-logical eraseblock locking. Before accessing a
- * logical eraseblock it is locked for reading or writing. The per-logical
- * eraseblock locking is implemented by means of the lock tree. The lock tree
- * is an RB-tree which refers all the currently locked logical eraseblocks. The
- * lock tree elements are &struct ubi_ltree_entry objects. They are indexed by
- * (@vol_id, @lnum) pairs.
+ * The EBA sub-system implements per-logical eraseblock locking. Before
+ * accessing a logical eraseblock it is locked for reading or writing. The
+ * per-logical eraseblock locking is implemented by means of the lock tree. The
+ * lock tree is an RB-tree which refers all the currently locked logical
+ * eraseblocks. The lock tree elements are &struct ubi_ltree_entry objects.
+ * They are indexed by (@vol_id, @lnum) pairs.
  *
  * EBA also maintains the global sequence counter which is incremented each
  * time a logical eraseblock is mapped to a physical eraseblock and it is
@@ -1128,7 +1128,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 }
 
 /**
- * ubi_eba_init_scan - initialize the EBA unit using scanning information.
+ * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1143,7 +1143,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 	struct ubi_scan_leb *seb;
 	struct rb_node *rb;
 
-	dbg_eba("initialize EBA unit");
+	dbg_eba("initialize EBA sub-system");
 
 	spin_lock_init(&ubi->ltree_lock);
 	mutex_init(&ubi->alc_mutex);
@@ -1209,7 +1209,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		ubi->rsvd_pebs  += ubi->beb_rsvd_pebs;
 	}
 
-	dbg_eba("EBA unit is initialized");
+	dbg_eba("EBA sub-system is initialized");
 	return 0;
 
 out_free:

drivers/mtd/ubi/io.c

@@ -20,15 +20,15 @@
  */
 
 /*
- * UBI input/output unit.
+ * UBI input/output sub-system.
  *
- * This unit provides a uniform way to work with all kinds of the underlying
- * MTD devices. It also implements handy functions for reading and writing UBI
- * headers.
+ * This sub-system provides a uniform way to work with all kinds of the
+ * underlying MTD devices. It also implements handy functions for reading and
+ * writing UBI headers.
  *
  * We are trying to have a paranoid mindset and not to trust to what we read
- * from the flash media in order to be more secure and robust. So this unit
- * validates every single header it reads from the flash media.
+ * from the flash media in order to be more secure and robust. So this
+ * sub-system validates every single header it reads from the flash media.
  *
  * Some words about how the eraseblock headers are stored.
  *
@@ -79,11 +79,11 @@
  * 512-byte chunks, we have to allocate one more buffer and copy our VID header
  * to offset 448 of this buffer.
  *
- * The I/O unit does the following trick in order to avoid this extra copy.
- * It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID header
- * and returns a pointer to offset @ubi->vid_hdr_shift of this buffer. When the
- * VID header is being written out, it shifts the VID header pointer back and
- * writes the whole sub-page.
+ * The I/O sub-system does the following trick in order to avoid this extra
+ * copy. It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID
+ * header and returns a pointer to offset @ubi->vid_hdr_shift of this buffer.
+ * When the VID header is being written out, it shifts the VID header pointer
+ * back and writes the whole sub-page.
  */
 
 #include <linux/crc32.h>

drivers/mtd/ubi/scan.c

@@ -19,9 +19,9 @@
  */
 
 /*
- * UBI scanning unit.
+ * UBI scanning sub-system.
  *
- * This unit is responsible for scanning the flash media, checking UBI
+ * This sub-system is responsible for scanning the flash media, checking UBI
  * headers and providing complete information about the UBI flash image.
  *
  * The scanning information is represented by a &struct ubi_scan_info' object.
@@ -103,7 +103,7 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
  * non-zero if an inconsistency was found and zero if not.
  *
  * Note, UBI does sanity check of everything it reads from the flash media.
- * Most of the checks are done in the I/O unit. Here we check that the
+ * Most of the checks are done in the I/O sub-system. Here we check that the
  * information in the VID header is consistent to the information in other VID
  * headers of the same volume.
  */
@@ -256,8 +256,8 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 		 * that versions that are close to %0xFFFFFFFF are less then
 		 * versions that are close to %0.
 		 *
-		 * The UBI WL unit guarantees that the number of pending tasks
-		 * is not greater then %0x7FFFFFFF. So, if the difference
+		 * The UBI WL sub-system guarantees that the number of pending
+		 * tasks is not greater then %0x7FFFFFFF. So, if the difference
 		 * between any two versions is greater or equivalent to
 		 * %0x7FFFFFFF, there was an overflow and the logical
 		 * eraseblock with lower version is actually newer then the one
@@ -645,9 +645,9 @@ void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
  *
  * This function erases physical eraseblock 'pnum', and writes the erase
  * counter header to it. This function should only be used on UBI device
- * initialization stages, when the EBA unit had not been yet initialized. This
- * function returns zero in case of success and a negative error code in case
- * of failure.
+ * initialization stages, when the EBA sub-system had not been yet initialized.
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
  */
 int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		       int pnum, int ec)
@@ -687,9 +687,10 @@ int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
  * @si: scanning information
  *
  * This function returns a free physical eraseblock. It is supposed to be
- * called on the UBI initialization stages when the wear-leveling unit is not
- * initialized yet. This function picks a physical eraseblocks from one of the
- * lists, writes the EC header if it is needed, and removes it from the list.
+ * called on the UBI initialization stages when the wear-leveling sub-system is
+ * not initialized yet. This function picks a physical eraseblocks from one of
+ * the lists, writes the EC header if it is needed, and removes it from the
+ * list.
  *
  * This function returns scanning physical eraseblock information in case of
  * success and an error code in case of failure.
@@ -764,8 +765,9 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum
 		return err;
 	else if (err) {
 		/*
-		 * FIXME: this is actually duty of the I/O unit to initialize
-		 * this, but MTD does not provide enough information.
+		 * FIXME: this is actually duty of the I/O sub-system to
+		 * initialize this, but MTD does not provide enough
+		 * information.
 		 */
 		si->bad_peb_count += 1;
 		return 0;

drivers/mtd/ubi/scan.h

@@ -61,8 +61,8 @@ struct ubi_scan_leb {
  * @used_ebs: number of used logical eraseblocks in this volume (only for
  *            static volumes)
  * @last_data_size: amount of data in the last logical eraseblock of this
- * volume (always equivalent to the usable logical eraseblock size in case of
- * dynamic volumes)
+ *                  volume (always equivalent to the usable logical eraseblock
+ *                  size in case of dynamic volumes)
  * @data_pad: how many bytes at the end of logical eraseblocks of this volume
  *            are not used (due to volume alignment)
  * @compat: compatibility flags of this volume
@@ -92,8 +92,8 @@ struct ubi_scan_volume {
  * @free: list of free physical eraseblocks
  * @erase: list of physical eraseblocks which have to be erased
  * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
- * @bad_peb_count: count of bad physical eraseblocks
  *         those belonging to "preserve"-compatible internal volumes)
+ * @bad_peb_count: count of bad physical eraseblocks
  * @vols_found: number of volumes found during scanning
  * @highest_vol_id: highest volume ID
  * @alien_peb_count: count of physical eraseblocks in the @alien list
@@ -106,8 +106,8 @@ struct ubi_scan_volume {
  * @ec_count: a temporary variable used when calculating @mean_ec
  *
  * This data structure contains the result of scanning and may be used by other
- * UBI units to build final UBI data structures, further error-recovery and so
- * on.
+ * UBI sub-systems to build final UBI data structures, further error-recovery
+ * and so on.
  */
 struct ubi_scan_info {
 	struct rb_root volumes;
@@ -132,8 +132,7 @@ struct ubi_device;
 struct ubi_vid_hdr;
 
 /*
- * ubi_scan_move_to_list - move a physical eraseblock from the volume tree to a
- * list.
+ * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
  *
  * @sv: volume scanning information
  * @seb: scanning eraseblock infprmation

drivers/mtd/ubi/ubi-media.h

@@ -101,7 +101,8 @@ enum {
  *                     to the flash
  * @UBI_COMPAT_RO: attach this device in read-only mode
  * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
- * physical eraseblocks, don't allow the wear-leveling unit to move them
+ *                       physical eraseblocks, don't allow the wear-leveling
+ *                       sub-system to move them
  * @UBI_COMPAT_REJECT: reject this UBI image
  */
 enum {
@@ -248,9 +249,9 @@ struct ubi_ec_hdr {
  * The @data_crc field contains the CRC checksum of the contents of the logical
  * eraseblock if this is a static volume. In case of dynamic volumes, it does
  * not contain the CRC checksum as a rule. The only exception is when the
- * data of the physical eraseblock was moved by the wear-leveling unit, then
- * the wear-leveling unit calculates the data CRC and stores it in the
- * @data_crc field. And of course, the @copy_flag is %in this case.
+ * data of the physical eraseblock was moved by the wear-leveling sub-system,
+ * then the wear-leveling sub-system calculates the data CRC and stores it in
+ * the @data_crc field. And of course, the @copy_flag is %in this case.
  *
  * The @data_size field is used only for static volumes because UBI has to know
  * how many bytes of data are stored in this eraseblock. For dynamic volumes,

drivers/mtd/ubi/ubi.h

@@ -74,10 +74,10 @@
 #define UBI_IO_RETRIES 3
 
 /*
- * Error codes returned by the I/O unit.
+ * Error codes returned by the I/O sub-system.
  *
  * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only
- * 0xFF bytes
+ *                   %0xFF bytes
  * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
  *                  valid erase counter header, and the rest are %0xFF bytes
  * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
@@ -99,9 +99,9 @@ enum {
  * @ec: erase counter
  * @pnum: physical eraseblock number
  *
- * This data structure is used in the WL unit. Each physical eraseblock has a
- * corresponding &struct wl_entry object which may be kept in different
- * RB-trees. See WL unit for details.
+ * This data structure is used in the WL sub-system. Each physical eraseblock
+ * has a corresponding &struct wl_entry object which may be kept in different
+ * RB-trees. See WL sub-system for details.
  */
 struct ubi_wl_entry {
 	struct rb_node rb;
@@ -118,10 +118,10 @@ struct ubi_wl_entry {
  * @mutex: read/write mutex to implement read/write access serialization to
  *         the (@vol_id, @lnum) logical eraseblock
  *
- * This data structure is used in the EBA unit to implement per-LEB locking.
- * When a logical eraseblock is being locked - corresponding
+ * This data structure is used in the EBA sub-system to implement per-LEB
+ * locking. When a logical eraseblock is being locked - corresponding
  * &struct ubi_ltree_entry object is inserted to the lock tree (@ubi->ltree).
- * See EBA unit for details.
+ * See EBA sub-system for details.
  */
 struct ubi_ltree_entry {
 	struct rb_node rb;
@@ -225,7 +225,7 @@ struct ubi_volume {
 #ifdef CONFIG_MTD_UBI_GLUEBI
 	/*
 	 * Gluebi-related stuff may be compiled out.
-	 * TODO: this should not be built into UBI but should be a separate
+	 * Note: this should not be built into UBI but should be a separate
 	 * ubimtd driver which works on top of UBI and emulates MTD devices.
 	 */
 	struct ubi_volume_desc *gluebi_desc;
@@ -235,8 +235,7 @@ struct ubi_volume {
 };
 
 /**
- * struct ubi_volume_desc - descriptor of the UBI volume returned when it is
- * opened.
+ * struct ubi_volume_desc - UBI volume descriptor returned when it is opened.
  * @vol: reference to the corresponding volume description object
  * @mode: open mode (%UBI_READONLY, %UBI_READWRITE, or %UBI_EXCLUSIVE)
  */
@@ -356,16 +355,16 @@ struct ubi_device {
 	struct mutex volumes_mutex;
 
 	int max_ec;
-	/* TODO: mean_ec is not updated run-time, fix */
+	/* Note, mean_ec is not updated run-time - should be fixed */
 	int mean_ec;
 
-	/* EBA unit's stuff */
+	/* EBA sub-system's stuff */
 	unsigned long long global_sqnum;
 	spinlock_t ltree_lock;
 	struct rb_root ltree;
 	struct mutex alc_mutex;
 
-	/* Wear-leveling unit's stuff */
+	/* Wear-leveling sub-system's stuff */
 	struct rb_root used;
 	struct rb_root free;
 	struct rb_root scrub;
@@ -388,7 +387,7 @@ struct ubi_device {
 	int thread_enabled;
 	char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
 
-	/* I/O unit's stuff */
+	/* I/O sub-system's stuff */
 	long long flash_size;
 	int peb_count;
 	int peb_size;

drivers/mtd/ubi/wl.c

@@ -19,22 +19,22 @@
  */
 
 /*
- * UBI wear-leveling unit.
+ * UBI wear-leveling sub-system.
  *
- * This unit is responsible for wear-leveling. It works in terms of physical
- * eraseblocks and erase counters and knows nothing about logical eraseblocks,
- * volumes, etc. From this unit's perspective all physical eraseblocks are of
- * two types - used and free. Used physical eraseblocks are those that were
- * "get" by the 'ubi_wl_get_peb()' function, and free physical eraseblocks are
- * those that were put by the 'ubi_wl_put_peb()' function.
+ * This sub-system is responsible for wear-leveling. It works in terms of
+ * physical* eraseblocks and erase counters and knows nothing about logical
+ * eraseblocks, volumes, etc. From this sub-system's perspective all physical
+ * eraseblocks are of two types - used and free. Used physical eraseblocks are
+ * those that were "get" by the 'ubi_wl_get_peb()' function, and free physical
+ * eraseblocks are those that were put by the 'ubi_wl_put_peb()' function.
  *
  * Physical eraseblocks returned by 'ubi_wl_get_peb()' have only erase counter
- * header. The rest of the physical eraseblock contains only 0xFF bytes.
+ * header. The rest of the physical eraseblock contains only %0xFF bytes.
  *
- * When physical eraseblocks are returned to the WL unit by means of the
+ * When physical eraseblocks are returned to the WL sub-system by means of the
  * 'ubi_wl_put_peb()' function, they are scheduled for erasure. The erasure is
  * done asynchronously in context of the per-UBI device background thread,
- * which is also managed by the WL unit.
+ * which is also managed by the WL sub-system.
  *
  * The wear-leveling is ensured by means of moving the contents of used
  * physical eraseblocks with low erase counter to free physical eraseblocks
@@ -43,34 +43,36 @@
  * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
  * an "optimal" physical eraseblock. For example, when it is known that the
  * physical eraseblock will be "put" soon because it contains short-term data,
- * the WL unit may pick a free physical eraseblock with low erase counter, and
- * so forth.
+ * the WL sub-system may pick a free physical eraseblock with low erase
+ * counter, and so forth.
  *
- * If the WL unit fails to erase a physical eraseblock, it marks it as bad.
+ * If the WL sub-system fails to erase a physical eraseblock, it marks it as
+ * bad.
  *
- * This unit is also responsible for scrubbing. If a bit-flip is detected in a
- * physical eraseblock, it has to be moved. Technically this is the same as
- * moving it for wear-leveling reasons.
+ * This sub-system is also responsible for scrubbing. If a bit-flip is detected
+ * in a physical eraseblock, it has to be moved. Technically this is the same
+ * as moving it for wear-leveling reasons.
  *
- * As it was said, for the UBI unit all physical eraseblocks are either "free"
- * or "used". Free eraseblock are kept in the @wl->free RB-tree, while used
- * eraseblocks are kept in a set of different RB-trees: @wl->used,
+ * As it was said, for the UBI sub-system all physical eraseblocks are either
+ * "free" or "used". Free eraseblock are kept in the @wl->free RB-tree, while
+ * used eraseblocks are kept in a set of different RB-trees: @wl->used,
  * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub.
  *
  * Note, in this implementation, we keep a small in-RAM object for each physical
  * eraseblock. This is surely not a scalable solution. But it appears to be good
  * enough for moderately large flashes and it is simple. In future, one may
- * re-work this unit and make it more scalable.
+ * re-work this sub-system and make it more scalable.
  *
- * At the moment this unit does not utilize the sequence number, which was
- * introduced relatively recently. But it would be wise to do this because the
- * sequence number of a logical eraseblock characterizes how old is it. For
+ * At the moment this sub-system does not utilize the sequence number, which
+ * was introduced relatively recently. But it would be wise to do this because
+ * the sequence number of a logical eraseblock characterizes how old is it. For
  * example, when we move a PEB with low erase counter, and we need to pick the
  * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we
  * pick target PEB with an average EC if our PEB is not very "old". This is a
- * room for future re-works of the WL unit.
+ * room for future re-works of the WL sub-system.
  *
- * FIXME: looks too complex, should be simplified (later).
+ * Note: the stuff with protection trees looks too complex and is difficult to
+ * understand. Should be fixed.
  */
 
 #include <linux/slab.h>
@@ -92,20 +94,21 @@
 
 /*
  * Maximum difference between two erase counters. If this threshold is
- * exceeded, the WL unit starts moving data from used physical eraseblocks with
- * low erase counter to free physical eraseblocks with high erase counter.
+ * exceeded, the WL sub-system starts moving data from used physical
+ * eraseblocks with low erase counter to free physical eraseblocks with high
+ * erase counter.
  */
 #define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD
 
 /*
- * When a physical eraseblock is moved, the WL unit has to pick the target
+ * When a physical eraseblock is moved, the WL sub-system has to pick the target
  * physical eraseblock to move to. The simplest way would be just to pick the
  * one with the highest erase counter. But in certain workloads this could lead
  * to an unlimited wear of one or few physical eraseblock. Indeed, imagine a
  * situation when the picked physical eraseblock is constantly erased after the
  * data is written to it. So, we have a constant which limits the highest erase
- * counter of the free physical eraseblock to pick. Namely, the WL unit does
- * not pick eraseblocks with erase counter greater then the lowest erase
+ * counter of the free physical eraseblock to pick. Namely, the WL sub-system
+ * does not pick eraseblocks with erase counter greater then the lowest erase
  * counter plus %WL_FREE_MAX_DIFF.
  */
 #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -123,11 +126,11 @@
  * @abs_ec: the absolute erase counter value when the protection ends
  * @e: the wear-leveling entry of the physical eraseblock under protection
  *
- * When the WL unit returns a physical eraseblock, the physical eraseblock is
- * protected from being moved for some "time". For this reason, the physical
- * eraseblock is not directly moved from the @wl->free tree to the @wl->used
- * tree. There is one more tree in between where this physical eraseblock is
- * temporarily stored (@wl->prot).
+ * When the WL sub-system returns a physical eraseblock, the physical
+ * eraseblock is protected from being moved for some "time". For this reason,
+ * the physical eraseblock is not directly moved from the @wl->free tree to the
+ * @wl->used tree. There is one more tree in between where this physical
+ * eraseblock is temporarily stored (@wl->prot).
  *
  * All this protection stuff is needed because:
  *  o we don't want to move physical eraseblocks just after we have given them
@@ -175,7 +178,6 @@ struct ubi_wl_prot_entry {
  * @list: a link in the list of pending works
  * @func: worker function
  * @priv: private data of the worker function
- *
  * @e: physical eraseblock to erase
  * @torture: if the physical eraseblock has to be tortured
  *
@@ -1136,7 +1138,7 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 }
 
 /**
- * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling unit.
+ * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock to return
  * @torture: if this physical eraseblock has to be tortured
@@ -1175,11 +1177,11 @@ int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture)
 		/*
 		 * User is putting the physical eraseblock which was selected
 		 * as the target the data is moved to. It may happen if the EBA
-		 * unit already re-mapped the LEB in 'ubi_eba_copy_leb()' but
-		 * the WL unit has not put the PEB to the "used" tree yet, but
-		 * it is about to do this. So we just set a flag which will
-		 * tell the WL worker that the PEB is not needed anymore and
-		 * should be scheduled for erasure.
+		 * sub-system already re-mapped the LEB in 'ubi_eba_copy_leb()'
+		 * but the WL sub-system has not put the PEB to the "used" tree
+		 * yet, but it is about to do this. So we just set a flag which
+		 * will tell the WL worker that the PEB is not needed anymore
+		 * and should be scheduled for erasure.
 		 */
 		dbg_wl("PEB %d is the target of data moving", pnum);
 		ubi_assert(!ubi->move_to_put);
@@ -1425,8 +1427,7 @@ static void cancel_pending(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_init_scan - initialize the wear-leveling unit using scanning
- * information.
+ * ubi_wl_init_scan - initialize the WL sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1583,13 +1584,12 @@ static void protection_trees_destroy(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_close - close the wear-leveling unit.
+ * ubi_wl_close - close the wear-leveling sub-system.
  * @ubi: UBI device description object
  */
 void ubi_wl_close(struct ubi_device *ubi)
 {
-	dbg_wl("close the UBI wear-leveling unit");
-
+	dbg_wl("close the WL sub-system");
 	cancel_pending(ubi);
 	protection_trees_destroy(ubi);
 	tree_destroy(&ubi->used);