From 861fefbf550d41e7a4f44584f3ec35977fa08bf1 Mon Sep 17 00:00:00 2001 From: Alex Chiang <achiang@hp.com> Date: Tue, 31 Mar 2009 09:23:11 -0600 Subject: [PATCH] PCI Hotplug: cpqphp: stray whitespace cleanups Clean up all stray whitespace issues, such as trailing whitespace, spaces before tabs, etc. and whatever else vim's c_space_errors highlights in red. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> --- drivers/pci/hotplug/cpqphp.h | 58 ++++++++++---------- drivers/pci/hotplug/cpqphp_core.c | 56 ++++++++----------- drivers/pci/hotplug/cpqphp_ctrl.c | 86 +++++++++++++++--------------- drivers/pci/hotplug/cpqphp_nvram.c | 18 +++---- drivers/pci/hotplug/cpqphp_pci.c | 14 ++--- 5 files changed, 110 insertions(+), 122 deletions(-) diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index afaf8f69f73e..b627dfd74500 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -150,25 +150,25 @@ struct ctrl_reg { /* offset */ /* offsets to the controller registers based on the above structure layout */ enum ctrl_offsets { - SLOT_RST = offsetof(struct ctrl_reg, slot_RST), + SLOT_RST = offsetof(struct ctrl_reg, slot_RST), SLOT_ENABLE = offsetof(struct ctrl_reg, slot_enable), MISC = offsetof(struct ctrl_reg, misc), LED_CONTROL = offsetof(struct ctrl_reg, led_control), INT_INPUT_CLEAR = offsetof(struct ctrl_reg, int_input_clear), - INT_MASK = offsetof(struct ctrl_reg, int_mask), - CTRL_RESERVED0 = offsetof(struct ctrl_reg, reserved0), + INT_MASK = offsetof(struct ctrl_reg, int_mask), + CTRL_RESERVED0 = offsetof(struct ctrl_reg, reserved0), CTRL_RESERVED1 = offsetof(struct ctrl_reg, reserved1), CTRL_RESERVED2 = offsetof(struct ctrl_reg, reserved1), - GEN_OUTPUT_AB = offsetof(struct ctrl_reg, gen_output_AB), - NON_INT_INPUT = offsetof(struct ctrl_reg, non_int_input), + GEN_OUTPUT_AB = offsetof(struct ctrl_reg, gen_output_AB), + NON_INT_INPUT = offsetof(struct ctrl_reg, non_int_input), CTRL_RESERVED3 = offsetof(struct ctrl_reg, reserved3), CTRL_RESERVED4 = offsetof(struct ctrl_reg, reserved4), CTRL_RESERVED5 = offsetof(struct ctrl_reg, reserved5), CTRL_RESERVED6 = offsetof(struct ctrl_reg, reserved6), CTRL_RESERVED7 = offsetof(struct ctrl_reg, reserved7), CTRL_RESERVED8 = offsetof(struct ctrl_reg, reserved8), - SLOT_MASK = offsetof(struct ctrl_reg, slot_mask), - CTRL_RESERVED9 = offsetof(struct ctrl_reg, reserved9), + SLOT_MASK = offsetof(struct ctrl_reg, slot_mask), + CTRL_RESERVED9 = offsetof(struct ctrl_reg, reserved9), CTRL_RESERVED10 = offsetof(struct ctrl_reg, reserved10), CTRL_RESERVED11 = offsetof(struct ctrl_reg, reserved11), SLOT_SERR = offsetof(struct ctrl_reg, slot_SERR), @@ -220,15 +220,15 @@ struct slot_rt { /* offsets to the hotplug slot resource table registers based on the above structure layout */ enum slot_rt_offsets { DEV_FUNC = offsetof(struct slot_rt, dev_func), - PRIMARY_BUS = offsetof(struct slot_rt, primary_bus), - SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus), - MAX_BUS = offsetof(struct slot_rt, max_bus), - IO_BASE = offsetof(struct slot_rt, io_base), - IO_LENGTH = offsetof(struct slot_rt, io_length), - MEM_BASE = offsetof(struct slot_rt, mem_base), - MEM_LENGTH = offsetof(struct slot_rt, mem_length), - PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base), - PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length), + PRIMARY_BUS = offsetof(struct slot_rt, primary_bus), + SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus), + MAX_BUS = offsetof(struct slot_rt, max_bus), + IO_BASE = offsetof(struct slot_rt, io_base), + IO_LENGTH = offsetof(struct slot_rt, io_length), + MEM_BASE = offsetof(struct slot_rt, mem_base), + MEM_LENGTH = offsetof(struct slot_rt, mem_length), + PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base), + PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length), }; struct pci_func { @@ -471,7 +471,7 @@ static inline void return_resource(struct pci_resource **head, struct pci_resour static inline void set_SOGO(struct controller *ctrl) { u16 misc; - + misc = readw(ctrl->hpc_reg + MISC); misc = (misc | 0x0001) & 0xFFFB; writew(misc, ctrl->hpc_reg + MISC); @@ -481,7 +481,7 @@ static inline void set_SOGO(struct controller *ctrl) static inline void amber_LED_on(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control |= (0x01010000L << slot); writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -491,7 +491,7 @@ static inline void amber_LED_on(struct controller *ctrl, u8 slot) static inline void amber_LED_off(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= ~(0x01010000L << slot); writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -504,7 +504,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot) led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= (0x01010000L << slot); - + return led_control ? 1 : 0; } @@ -512,7 +512,7 @@ static inline int read_amber_LED(struct controller *ctrl, u8 slot) static inline void green_LED_on(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control |= 0x0101L << slot; writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -521,7 +521,7 @@ static inline void green_LED_on(struct controller *ctrl, u8 slot) static inline void green_LED_off(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= ~(0x0101L << slot); writel(led_control, ctrl->hpc_reg + LED_CONTROL); @@ -531,7 +531,7 @@ static inline void green_LED_off(struct controller *ctrl, u8 slot) static inline void green_LED_blink(struct controller *ctrl, u8 slot) { u32 led_control; - + led_control = readl(ctrl->hpc_reg + LED_CONTROL); led_control &= ~(0x0101L << slot); led_control |= (0x0001L << slot); @@ -586,11 +586,11 @@ static inline u8 read_slot_enable(struct controller *ctrl) static inline u8 get_controller_speed(struct controller *ctrl) { u8 curr_freq; - u16 misc; - + u16 misc; + if (ctrl->pcix_support) { curr_freq = readb(ctrl->hpc_reg + NEXT_CURR_FREQ); - if ((curr_freq & 0xB0) == 0xB0) + if ((curr_freq & 0xB0) == 0xB0) return PCI_SPEED_133MHz_PCIX; if ((curr_freq & 0xA0) == 0xA0) return PCI_SPEED_100MHz_PCIX; @@ -602,10 +602,10 @@ static inline u8 get_controller_speed(struct controller *ctrl) return PCI_SPEED_33MHz; } - misc = readw(ctrl->hpc_reg + MISC); - return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; + misc = readw(ctrl->hpc_reg + MISC); + return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; } - + /* * get_adapter_speed - find the max supported frequency/mode of adapter. diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index c2e1bcbb28a7..55eae4c233c9 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -25,7 +25,7 @@ * Send feedback to <greg@kroah.com> * * Jan 12, 2003 - Added 66/100/133MHz PCI-X support, - * Torben Mathiasen <torben.mathiasen@hp.com> + * Torben Mathiasen <torben.mathiasen@hp.com> * */ @@ -100,8 +100,8 @@ static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = { .get_attention_status = get_attention_status, .get_latch_status = get_latch_status, .get_adapter_status = get_adapter_status, - .get_max_bus_speed = get_max_bus_speed, - .get_cur_bus_speed = get_cur_bus_speed, + .get_max_bus_speed = get_max_bus_speed, + .get_cur_bus_speed = get_cur_bus_speed, }; @@ -144,7 +144,7 @@ static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *e break; } } - + if (!status) fp = NULL; @@ -292,7 +292,7 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start, if (!smbios_table) return NULL; - if (!previous) { + if (!previous) { previous = smbios_start; } else { previous = get_subsequent_smbios_entry(smbios_start, @@ -300,7 +300,7 @@ static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start, } while (previous) { - if (readb(previous + SMBIOS_GENERIC_TYPE) != type) { + if (readb(previous + SMBIOS_GENERIC_TYPE) != type) { previous = get_subsequent_smbios_entry(smbios_start, smbios_table, previous); } else { @@ -426,7 +426,7 @@ static int ctrl_slot_setup(struct controller *ctrl, cpq_get_latch_status(ctrl, slot); hotplug_slot_info->adapter_status = get_presence_status(ctrl, slot); - + dbg("registering bus %d, dev %d, number %d, " "ctrl->slot_device_offset %d, slot %d\n", slot->bus, slot->device, @@ -440,7 +440,7 @@ static int ctrl_slot_setup(struct controller *ctrl, err("pci_hp_register failed with error %d\n", result); goto error_info; } - + slot->next = ctrl->slot; ctrl->slot = slot; @@ -563,9 +563,9 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) } - // If we got here, we didn't find an entry in the IRQ mapping table - // for the target PCI device. If we did determine that the target - // device is on the other side of a PCI-to-PCI bridge, return the + // If we got here, we didn't find an entry in the IRQ mapping table + // for the target PCI device. If we did determine that the target + // device is on the other side of a PCI-to-PCI bridge, return the // slot number for the bridge. if (bridgeSlot != 0xFF) { *slot = bridgeSlot; @@ -719,7 +719,7 @@ static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value) dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); - return cpqhp_hardware_test(ctrl, value); + return cpqhp_hardware_test(ctrl, value); } @@ -738,7 +738,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = cpq_get_attention_status(ctrl, slot); @@ -832,7 +832,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* Check for the proper subsytem ID's - * Intel uses a different SSID programming model than Compaq. + * Intel uses a different SSID programming model than Compaq. * For Intel, each SSID bit identifies a PHP capability. * Also Intel HPC's may have RID=0. */ @@ -1087,7 +1087,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { goto err_free_bus; } - + dbg("pdev = %p\n", pdev); dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0)); dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0)); @@ -1182,7 +1182,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) __func__, rc); goto err_iounmap; } - + /* Mask all general input interrupts */ writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK); @@ -1291,7 +1291,6 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } - static int one_time_init(void) { int loop; @@ -1328,10 +1327,10 @@ static int one_time_init(void) retval = -EIO; goto error; } - + /* Now, map the int15 entry point if we are on compaq specific hardware */ compaq_nvram_init(cpqhp_rom_start); - + /* Map smbios table entry point structure */ smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start, cpqhp_rom_start + ROM_PHY_LEN); @@ -1361,7 +1360,6 @@ static int one_time_init(void) return retval; } - static void __exit unload_cpqphpd(void) { struct pci_func *next; @@ -1381,10 +1379,10 @@ static void __exit unload_cpqphpd(void) if (ctrl->hpc_reg) { u16 misc; rc = read_slot_enable (ctrl); - + writeb(0, ctrl->hpc_reg + SLOT_SERR); writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK); - + misc = readw(ctrl->hpc_reg + MISC); misc &= 0xFFFD; writew(misc, ctrl->hpc_reg + MISC); @@ -1475,27 +1473,23 @@ static void __exit unload_cpqphpd(void) iounmap(smbios_start); } - - static struct pci_device_id hpcd_pci_tbl[] = { { /* handle any PCI Hotplug controller */ .class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00), .class_mask = ~0, - + /* no matter who makes it */ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - + }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl); - - static struct pci_driver cpqhpc_driver = { .name = "compaq_pci_hotplug", .id_table = hpcd_pci_tbl, @@ -1503,8 +1497,6 @@ static struct pci_driver cpqhpc_driver = { /* remove: cpqhpc_remove_one, */ }; - - static int __init cpqhpc_init(void) { int result; @@ -1518,7 +1510,6 @@ static int __init cpqhpc_init(void) return result; } - static void __exit cpqhpc_cleanup(void) { dbg("unload_cpqphpd()\n"); @@ -1529,8 +1520,5 @@ static void __exit cpqhpc_cleanup(void) cpqhp_shutdown_debugfs(); } - module_init(cpqhpc_init); module_exit(cpqhpc_cleanup); - - diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index cc227a8c4b11..ec3a76519af2 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -642,7 +642,7 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz return NULL; for (max = *head; max; max = max->next) { - /* If not big enough we could probably just bail, + /* If not big enough we could probably just bail, * instead we'll continue to the next. */ if (max->length < size) continue; @@ -886,7 +886,7 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data) u32 Diff; u32 temp_dword; - + misc = readw(ctrl->hpc_reg + MISC); /*************************************** * Check to see if it was our interrupt @@ -1130,33 +1130,33 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER); u16 reg16; u32 leds = readl(ctrl->hpc_reg + LED_CONTROL); - + if (ctrl->speed == adapter_speed) return 0; - + /* We don't allow freq/mode changes if we find another adapter running * in another slot on this controller */ for(slot = ctrl->slot; slot; slot = slot->next) { - if (slot->device == (hp_slot + ctrl->slot_device_offset)) + if (slot->device == (hp_slot + ctrl->slot_device_offset)) continue; if (!slot->hotplug_slot || !slot->hotplug_slot->info) continue; - if (slot->hotplug_slot->info->adapter_status == 0) + if (slot->hotplug_slot->info->adapter_status == 0) continue; /* If another adapter is running on the same segment but at a * lower speed/mode, we allow the new adapter to function at * this rate if supported */ - if (ctrl->speed < adapter_speed) + if (ctrl->speed < adapter_speed) return 0; return 1; } - + /* If the controller doesn't support freq/mode changes and the * controller is running at a higher mode, we bail */ if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability)) return 1; - + /* But we allow the adapter to run at a lower rate if possible */ if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability)) return 0; @@ -1171,22 +1171,22 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ writel(0x0L, ctrl->hpc_reg + LED_CONTROL); writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE); - - set_SOGO(ctrl); + + set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); - + if (adapter_speed != PCI_SPEED_133MHz_PCIX) reg = 0xF5; else - reg = 0xF4; + reg = 0xF4; pci_write_config_byte(ctrl->pci_dev, 0x41, reg); - + reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ); reg16 &= ~0x000F; switch(adapter_speed) { - case(PCI_SPEED_133MHz_PCIX): + case(PCI_SPEED_133MHz_PCIX): reg = 0x75; - reg16 |= 0xB; + reg16 |= 0xB; break; case(PCI_SPEED_100MHz_PCIX): reg = 0x74; @@ -1203,47 +1203,47 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ default: /* 33MHz PCI 2.2 */ reg = 0x71; break; - + } reg16 |= 0xB << 12; writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ); - - mdelay(5); - + + mdelay(5); + /* Reenable interrupts */ writel(0, ctrl->hpc_reg + INT_MASK); - pci_write_config_byte(ctrl->pci_dev, 0x41, reg); - + pci_write_config_byte(ctrl->pci_dev, 0x41, reg); + /* Restart state machine */ reg = ~0xF; pci_read_config_byte(ctrl->pci_dev, 0x43, ®); pci_write_config_byte(ctrl->pci_dev, 0x43, reg); - + /* Only if mode change...*/ if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) || ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) set_SOGO(ctrl); - + wait_for_ctrl_irq(ctrl); mdelay(1100); - + /* Restore LED/Slot state */ writel(leds, ctrl->hpc_reg + LED_CONTROL); writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE); - + set_SOGO(ctrl); wait_for_ctrl_irq(ctrl); ctrl->speed = adapter_speed; slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - info("Successfully changed frequency/mode for adapter in slot %d\n", + info("Successfully changed frequency/mode for adapter in slot %d\n", slot->number); return 0; } -/* the following routines constitute the bulk of the +/* the following routines constitute the bulk of the hotplug controller logic */ @@ -1299,7 +1299,7 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) /* Wait for SOBS to be unset */ wait_for_ctrl_irq (ctrl); - + adapter_speed = get_adapter_speed(ctrl, hp_slot); if (ctrl->speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) @@ -1443,12 +1443,12 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) /* Wait for SOBS to be unset */ wait_for_ctrl_irq (ctrl); - + adapter_speed = get_adapter_speed(ctrl, hp_slot); if (ctrl->speed != adapter_speed) if (set_controller_speed(ctrl, adapter_speed, hp_slot)) rc = WRONG_BUS_FREQUENCY; - + /* turn off board without attaching to the bus */ disable_slot_power (ctrl, hp_slot); @@ -1461,7 +1461,7 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) if (rc) return rc; - + p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); /* turn on board and blink green LED */ @@ -1859,12 +1859,12 @@ static void interrupt_event_handler(struct controller *ctrl) info(msg_button_on, p_slot->number); } mutex_lock(&ctrl->crit_sect); - + dbg("blink green LED and turn off amber\n"); - + amber_LED_off (ctrl, hp_slot); green_LED_blink (ctrl, hp_slot); - + set_SOGO(ctrl); /* Wait for SOBS to be unset */ @@ -1958,7 +1958,7 @@ void cpqhp_pushbutton_thread(unsigned long slot) if (cpqhp_process_SI(ctrl, func) != 0) { amber_LED_on(ctrl, hp_slot); green_LED_off(ctrl, hp_slot); - + set_SOGO(ctrl); /* Wait for SOBS to be unset */ @@ -2079,7 +2079,7 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func) struct pci_bus *pci_bus = ctrl->pci_bus; int physical_slot=0; - device = func->device; + device = func->device; func = cpqhp_slot_find(ctrl->bus, device, index++); p_slot = cpqhp_find_slot(ctrl, device); if (p_slot) { @@ -2216,7 +2216,7 @@ int cpqhp_hardware_test(struct controller *ctrl, int test_num) long_delay((3*HZ)/10); work_LED = work_LED >> 16; writel(work_LED, ctrl->hpc_reg + LED_CONTROL); - + set_SOGO(ctrl); /* Wait for SOGO interrupt */ @@ -2339,7 +2339,7 @@ static u32 configure_new_device(struct controller * ctrl, struct pci_func * func /* - Configuration logic that involves the hotplug data structures and + Configuration logic that involves the hotplug data structures and their bookkeeping */ @@ -2917,17 +2917,17 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func } /* End of base register loop */ if (cpqhp_legacy_mode) { /* Figure out which interrupt pin this function uses */ - rc = pci_bus_read_config_byte (pci_bus, devfn, + rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_INTERRUPT_PIN, &temp_byte); /* If this function needs an interrupt and we are behind * a bridge and the pin is tied to something that's * alread mapped, set this one the same */ - if (temp_byte && resources->irqs && - (resources->irqs->valid_INT & + if (temp_byte && resources->irqs && + (resources->irqs->valid_INT & (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) { /* We have to share with something already set up */ - IRQ = resources->irqs->interrupt[(temp_byte + + IRQ = resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03]; } else { /* Program IRQ based on card type */ diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c index cb174888002b..76e110f0e3a6 100644 --- a/drivers/pci/hotplug/cpqphp_nvram.c +++ b/drivers/pci/hotplug/cpqphp_nvram.c @@ -113,7 +113,7 @@ static u32 add_byte( u32 **p_buffer, u8 value, u32 *used, u32 *avail) if ((*used + 1) > *avail) return(1); - + *((u8*)*p_buffer) = value; tByte = (u8**)p_buffer; (*tByte)++; @@ -170,10 +170,10 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size) unsigned long flags; int op = operation; int ret_val; - + if (!compaq_int15_entry_point) return -ENODEV; - + spin_lock_irqsave(&int15_lock, flags); __asm__ ( "xorl %%ebx,%%ebx\n" \ @@ -187,7 +187,7 @@ static u32 access_EV (u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size) "D" (buffer), "m" (compaq_int15_entry_point) : "%ebx", "%edx"); spin_unlock_irqrestore(&int15_lock, flags); - + return((ret_val & 0xFF00) >> 8); } @@ -263,7 +263,7 @@ static u32 store_HRT (void __iomem *rom_start) p_EV_header = (struct ev_hrt_header *) pFill; ctrl = cpqhp_ctrl_list; - + // The revision of this structure rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available); if (rc) @@ -401,7 +401,7 @@ static u32 store_HRT (void __iomem *rom_start) ctrl = ctrl->next; } - + p_EV_header->num_of_ctrl = numCtrl; // Now store the EV @@ -479,7 +479,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) function = p_ev_ctrl->function; while ((bus != ctrl->bus) || - (device != PCI_SLOT(ctrl->pci_dev->devfn)) || + (device != PCI_SLOT(ctrl->pci_dev->devfn)) || (function != PCI_FUNC(ctrl->pci_dev->devfn))) { nummem = p_ev_ctrl->mem_avail; numpmem = p_ev_ctrl->p_mem_avail; @@ -640,14 +640,14 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) if (rc) return(rc); } else { - if ((evbuffer[0] != 0) && (!ctrl->push_flag)) + if ((evbuffer[0] != 0) && (!ctrl->push_flag)) return 1; } return 0; } - + int compaq_nvram_store (void __iomem *rom_start) { int rc = 1; diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index 6c0ed0fcb8ee..573a2702fb6a 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -82,7 +82,7 @@ static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iom } -int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) +int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) { unsigned char bus; struct pci_bus *child; @@ -116,10 +116,10 @@ int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) } -int cpqhp_unconfigure_device(struct pci_func* func) +int cpqhp_unconfigure_device(struct pci_func* func) { int j; - + dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function); for (j=0; j<8 ; j++) { @@ -195,8 +195,8 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num) /* - * WTF??? This function isn't in the code, yet a function calls it, but the - * compiler optimizes it away? strange. Here as a placeholder to keep the + * WTF??? This function isn't in the code, yet a function calls it, but the + * compiler optimizes it away? strange. Here as a placeholder to keep the * compiler happy. */ static int PCI_ScanBusNonBridge (u8 bus, u8 device) @@ -398,7 +398,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) index = 0; new_slot = cpqhp_slot_find(busnumber, device, index++); - while (new_slot && + while (new_slot && (new_slot->function != (u8) function)) new_slot = cpqhp_slot_find(busnumber, device, index++); @@ -1168,7 +1168,7 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) * this function is for hot plug ADD! * * returns 0 if success - */ + */ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start) { u8 temp; -- 2.30.9