Commit 8749af68 authored by Russell King's avatar Russell King Committed by Russell King

[PATCH] ARM: Generic Dynamic Tick Timer support for ARM, take 4

This patch adds support for Dynamic Tick Timer for ARM. Dynamic Tick is
also known as VST (Variable Scheduling Timeouts).

Dynamic Tick has been in use in the OMAP tree since last October.  The
patch is not intrusive, and does not do anything unless CONFIG_NO_IDLE_HZ
is defined.  This patch has the following fixed based on comments from
RMK:
- Time is updated before calling interrupt handlers.
- Added new interrupt flag SA_TIMER to avoid duplicate timer interrupts
- Moved struct dyn_tick_timer to time.h until we at some point probably
  have an arch independent dyn-tick.h
- Cleaned up testing for DYN_TICK_ENABLED in irq.c

 I've cleaned up this patch to fix some remaining issues:
 - Call the timer tick handler with irqs disabled, as it would be from
   a normal interrupt
 - if we have a dyn_tick, we better implement all methods.
 - generic timer_dyn_reprogram() call, to be called before sleeping
 - added command line option - "dyntick=" to allow boot-time control
   of this feature
    -- rmk

Signed-off-by: Tony Lindgren
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 321ab6a5
...@@ -346,6 +346,21 @@ config PREEMPT ...@@ -346,6 +346,21 @@ config PREEMPT
Say Y here if you are building a kernel for a desktop, embedded Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure. or real-time system. Say N if you are unsure.
config NO_IDLE_HZ
bool "Dynamic tick timer"
help
Select this option if you want to disable continuous timer ticks
and have them programmed to occur as required. This option saves
power as the system can remain in idle state for longer.
By default dynamic tick is disabled during the boot, and can be
manually enabled with:
echo 1 > /sys/devices/system/timer/timer0/dyn_tick
Alternatively, if you want dynamic tick automatically enabled
during boot, pass "dyntick=enable" via the kernel command string.
config ARCH_DISCONTIGMEM_ENABLE config ARCH_DISCONTIGMEM_ENABLE
bool bool
default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
......
...@@ -4,6 +4,10 @@ ...@@ -4,6 +4,10 @@
* Copyright (C) 1992 Linus Torvalds * Copyright (C) 1992 Linus Torvalds
* Modifications for ARM processor Copyright (C) 1995-2000 Russell King. * Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
* *
* Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
* Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
* Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
*
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
...@@ -37,6 +41,7 @@ ...@@ -37,6 +41,7 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/mach/time.h>
/* /*
* Maximum IRQ count. Currently, this is arbitary. However, it should * Maximum IRQ count. Currently, this is arbitary. However, it should
...@@ -329,6 +334,15 @@ __do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs) ...@@ -329,6 +334,15 @@ __do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
spin_unlock(&irq_controller_lock); spin_unlock(&irq_controller_lock);
#ifdef CONFIG_NO_IDLE_HZ
if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
write_seqlock(&xtime_lock);
if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
system_timer->dyn_tick->handler(irq, 0, regs);
write_sequnlock(&xtime_lock);
}
#endif
if (!(action->flags & SA_INTERRUPT)) if (!(action->flags & SA_INTERRUPT))
local_irq_enable(); local_irq_enable();
......
...@@ -381,6 +381,95 @@ static struct sysdev_class timer_sysclass = { ...@@ -381,6 +381,95 @@ static struct sysdev_class timer_sysclass = {
.resume = timer_resume, .resume = timer_resume,
}; };
#ifdef CONFIG_NO_IDLE_HZ
static int timer_dyn_tick_enable(void)
{
struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
unsigned long flags;
int ret = -ENODEV;
if (dyn_tick) {
write_seqlock_irqsave(&xtime_lock, flags);
ret = 0;
if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
ret = dyn_tick->enable();
if (ret == 0)
dyn_tick->state |= DYN_TICK_ENABLED;
}
write_sequnlock_irqrestore(&xtime_lock, flags);
}
return ret;
}
static int timer_dyn_tick_disable(void)
{
struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
unsigned long flags;
int ret = -ENODEV;
if (dyn_tick) {
write_seqlock_irqsave(&xtime_lock, flags);
ret = 0;
if (dyn_tick->state & DYN_TICK_ENABLED) {
ret = dyn_tick->disable();
if (ret == 0)
dyn_tick->state &= ~DYN_TICK_ENABLED;
}
write_sequnlock_irqrestore(&xtime_lock, flags);
}
return ret;
}
void timer_dyn_reprogram(void)
{
struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
unsigned long flags;
write_seqlock_irqsave(&xtime_lock, flags);
if (dyn_tick->state & DYN_TICK_ENABLED)
dyn_tick->reprogram(next_timer_interrupt() - jiffies);
write_sequnlock_irqrestore(&xtime_lock, flags);
}
static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
{
return sprintf(buf, "%i\n",
(system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1);
}
static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf,
size_t count)
{
unsigned int enable = simple_strtoul(buf, NULL, 2);
if (enable)
timer_dyn_tick_enable();
else
timer_dyn_tick_disable();
return count;
}
static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick);
/*
* dyntick=enable|disable
*/
static char dyntick_str[4] __initdata = "";
static int __init dyntick_setup(char *str)
{
if (str)
strlcpy(dyntick_str, str, sizeof(dyntick_str));
return 1;
}
__setup("dyntick=", dyntick_setup);
#endif
static int __init timer_init_sysfs(void) static int __init timer_init_sysfs(void)
{ {
int ret = sysdev_class_register(&timer_sysclass); int ret = sysdev_class_register(&timer_sysclass);
...@@ -388,6 +477,20 @@ static int __init timer_init_sysfs(void) ...@@ -388,6 +477,20 @@ static int __init timer_init_sysfs(void)
system_timer->dev.cls = &timer_sysclass; system_timer->dev.cls = &timer_sysclass;
ret = sysdev_register(&system_timer->dev); ret = sysdev_register(&system_timer->dev);
} }
#ifdef CONFIG_NO_IDLE_HZ
if (ret == 0 && system_timer->dyn_tick) {
ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick);
/*
* Turn on dynamic tick after calibrate delay
* for correct bogomips
*/
if (ret == 0 && dyntick_str[0] == 'e')
ret = timer_dyn_tick_enable();
}
#endif
return ret; return ret;
} }
......
...@@ -39,8 +39,29 @@ struct sys_timer { ...@@ -39,8 +39,29 @@ struct sys_timer {
void (*suspend)(void); void (*suspend)(void);
void (*resume)(void); void (*resume)(void);
unsigned long (*offset)(void); unsigned long (*offset)(void);
#ifdef CONFIG_NO_IDLE_HZ
struct dyn_tick_timer *dyn_tick;
#endif
};
#ifdef CONFIG_NO_IDLE_HZ
#define DYN_TICK_SKIPPING (1 << 2)
#define DYN_TICK_ENABLED (1 << 1)
#define DYN_TICK_SUITABLE (1 << 0)
struct dyn_tick_timer {
unsigned int state; /* Current state */
int (*enable)(void); /* Enables dynamic tick */
int (*disable)(void); /* Disables dynamic tick */
void (*reprogram)(unsigned long); /* Reprograms the timer */
int (*handler)(int, void *, struct pt_regs *);
}; };
void timer_dyn_reprogram(void);
#endif
extern struct sys_timer *system_timer; extern struct sys_timer *system_timer;
extern void timer_tick(struct pt_regs *); extern void timer_tick(struct pt_regs *);
......
...@@ -114,6 +114,7 @@ typedef unsigned long sigset_t; ...@@ -114,6 +114,7 @@ typedef unsigned long sigset_t;
#define SIGSTKSZ 8192 #define SIGSTKSZ 8192
#ifdef __KERNEL__ #ifdef __KERNEL__
#define SA_TIMER 0x40000000
#define SA_IRQNOMASK 0x08000000 #define SA_IRQNOMASK 0x08000000
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment