reset: uniphier: add compatible string for LD11 SD-reset block

The LD11 SoC is equipped with not only MIO-reset but also SD-reset
for controlling RST_n pin of the eMMC device.

Update the binding document and remove unneeded "." from each line
in itemization.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Documentation/devicetree/bindings/reset/uniphier-reset.txt

@@ -6,14 +6,14 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -37,14 +37,15 @@ Media I/O (MIO) reset, SD reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
-    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
+    "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -68,13 +69,13 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
 - #reset-cells: should be 1.
 
 Example:

drivers/reset/reset-uniphier.c

@@ -389,6 +389,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-ld11-mio-reset",
 		.data = uniphier_sld3_mio_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-ld11-sd-reset",
+		.data = uniphier_pro5_sd_reset_data,
+	},
 	{
 		.compatible = "socionext,uniphier-ld20-sd-reset",
 		.data = uniphier_pro5_sd_reset_data,