Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (28 commits)
  drivers/ata: trim trailing whitespace
  Fixups to ATA ACPI hotplug
  libata: ignore SIMG4726 config pseudo device
  sata_sil24: don't use NCQ if marvell 4140 PMP is attached
  libata: don't schedule LPM action seperately during probing
  libata: make sure PMP notification is turned off during recovery
  libata: increase PMP register access timeout to 3s
  libata: ignore recovered PHY errors
  libata: kill hotplug related race condition
  libata: move reset freeze/thaw handling into ata_eh_reset()
  libata: reorganize ata_eh_reset() no reset method path
  libata: fix sata_link_hardreset() @online out parameter handling
  sata_promise: other cleanups
  sata_promise: mmio access cleanups
  sata_promise: fix irq clearing buglets
  ata: remove FIT() macro
  sata_mv: ensure empty request queue for FBS-NCQ EH
  sata_mv: cache main_irq_mask register in hpriv
  sata_mv: disregard masked irqs
  sata_mv: fix pmp drives not found
  ...

drivers/ata/libata-acpi.c

@@ -118,8 +118,8 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
 		ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
 }
 
-static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
-				    u32 event)
+static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device
+				    *dev, u32 event)
 {
 	char event_string[12];
 	char *envp[] = { event_string, NULL };
@@ -127,6 +127,9 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 	struct kobject *kobj = NULL;
 	int wait = 0;
 	unsigned long flags;
+	acpi_handle handle, tmphandle;
+	unsigned long sta;
+	acpi_status status;
 
 	if (!ap)
 		ap = dev->link->ap;
@@ -134,31 +137,56 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 
 	spin_lock_irqsave(ap->lock, flags);
 
+	if (dev)
+		handle = dev->acpi_handle;
+	else
+		handle = ap->acpi_handle;
+
+	status = acpi_get_handle(handle, "_EJ0", &tmphandle);
+	if (ACPI_FAILURE(status)) {
+		/* This device is not ejectable */
+		spin_unlock_irqrestore(ap->lock, flags);
+		return;
+	}
+
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+	if (ACPI_FAILURE(status)) {
+		printk ("Unable to determine bay status\n");
+		spin_unlock_irqrestore(ap->lock, flags);
+		return;
+	}
+
 	switch (event) {
 	case ACPI_NOTIFY_BUS_CHECK:
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		ata_ehi_push_desc(ehi, "ACPI event");
-		ata_ehi_hotplugged(ehi);
-		ata_port_freeze(ap);
-		break;
-
-	case ACPI_NOTIFY_EJECT_REQUEST:
-		ata_ehi_push_desc(ehi, "ACPI event");
+		if (!sta) {
+                /* Device has been unplugged */
 			if (dev)
 				dev->flags |= ATA_DFLAG_DETACH;
 			else {
 				struct ata_link *tlink;
 				struct ata_device *tdev;
 
-			ata_port_for_each_link(tlink, ap)
-				ata_link_for_each_dev(tdev, tlink)
-					tdev->flags |= ATA_DFLAG_DETACH;
+				ata_port_for_each_link(tlink, ap) {
+					ata_link_for_each_dev(tdev, tlink) {
+						tdev->flags |=
+							ATA_DFLAG_DETACH;
+					}
+				}
 			}
-
 			ata_port_schedule_eh(ap);
 			wait = 1;
-		break;
+		} else {
+			ata_ehi_hotplugged(ehi);
+			ata_port_freeze(ap);
 		}
+	}
+
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	if (wait)
+		ata_port_wait_eh(ap);
 
 	if (dev) {
 		if (dev->sdev)
@@ -170,11 +198,6 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 		sprintf(event_string, "BAY_EVENT=%d", event);
 		kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
 	}
-
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	if (wait)
-		ata_port_wait_eh(ap);
 }
 
 static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)

drivers/ata/libata-core.c

@@ -2126,6 +2126,13 @@ int ata_dev_configure(struct ata_device *dev)
 	dev->horkage |= ata_dev_blacklisted(dev);
 	ata_force_horkage(dev);
 
+	if (dev->horkage & ATA_HORKAGE_DISABLE) {
+		ata_dev_printk(dev, KERN_INFO,
+			       "unsupported device, disabling\n");
+		ata_dev_disable(dev);
+		return 0;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -3490,22 +3497,11 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 	if ((rc = sata_link_debounce(link, params, deadline)))
 		return rc;
 
-	/* Clear SError.  PMP and some host PHYs require this to
-	 * operate and clearing should be done before checking PHY
-	 * online status to avoid race condition (hotplugging between
-	 * link resume and status check).
-	 */
+	/* clear SError, some PHYs require this even for SRST to work */
 	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
 		rc = sata_scr_write(link, SCR_ERROR, serror);
-	if (rc == 0 || rc == -EINVAL) {
-		unsigned long flags;
 
-		spin_lock_irqsave(link->ap->lock, flags);
-		link->eh_info.serror = 0;
-		spin_unlock_irqrestore(link->ap->lock, flags);
-		rc = 0;
-	}
-	return rc;
+	return rc != -EINVAL ? rc : 0;
 }
 
 /**
@@ -3653,9 +3649,13 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 	if (check_ready)
 		rc = ata_wait_ready(link, deadline, check_ready);
  out:
-	if (rc && rc != -EAGAIN)
+	if (rc && rc != -EAGAIN) {
+		/* online is set iff link is online && reset succeeded */
+		if (online)
+			*online = false;
 		ata_link_printk(link, KERN_ERR,
 				"COMRESET failed (errno=%d)\n", rc);
+	}
 	DPRINTK("EXIT, rc=%d\n", rc);
 	return rc;
 }
@@ -3700,8 +3700,14 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
  */
 void ata_std_postreset(struct ata_link *link, unsigned int *classes)
 {
+	u32 serror;
+
 	DPRINTK("ENTER\n");
 
+	/* reset complete, clear SError */
+	if (!sata_scr_read(link, SCR_ERROR, &serror))
+		sata_scr_write(link, SCR_ERROR, serror);
+
 	/* print link status */
 	sata_print_link_status(link);
 
@@ -3894,8 +3900,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SAMSUNG CD-ROM SN-124", "N001",	ATA_HORKAGE_NODMA },
 	{ "Seagate STT20000A", NULL,		ATA_HORKAGE_NODMA },
 	/* Odd clown on sil3726/4726 PMPs */
-	{ "Config  Disk",	NULL,		ATA_HORKAGE_NODMA |
-						ATA_HORKAGE_SKIP_PM },
+	{ "Config  Disk",	NULL,		ATA_HORKAGE_DISABLE },
 
 	/* Weird ATAPI devices */
 	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
@@ -5616,7 +5621,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 			spin_lock_irqsave(ap->lock, flags);
 
 			ehi->probe_mask |= ATA_ALL_DEVICES;
-			ehi->action |= ATA_EH_RESET;
+			ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
 			ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
 
 			ap->pflags &= ~ATA_PFLAG_INITIALIZING;
@@ -5649,7 +5654,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 		struct ata_port *ap = host->ports[i];
 
 		ata_scsi_scan_host(ap, 1);
-		ata_lpm_schedule(ap, ap->pm_policy);
 	}
 
 	return 0;

drivers/ata/libata-eh.c

@@ -1308,12 +1308,7 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 	unsigned int err_mask = 0, action = 0;
 	u32 hotplug_mask;
 
-	if (serror & SERR_PERSISTENT) {
-		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_RESET;
-	}
-	if (serror &
-	    (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
+	if (serror & (SERR_PERSISTENT | SERR_DATA)) {
 		err_mask |= AC_ERR_ATA_BUS;
 		action |= ATA_EH_RESET;
 	}
@@ -2047,19 +2042,11 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 			unsigned int *classes, unsigned long deadline)
 {
 	struct ata_device *dev;
-	int rc;
 
 	ata_link_for_each_dev(dev, link)
 		classes[dev->devno] = ATA_DEV_UNKNOWN;
 
-	rc = reset(link, classes, deadline);
-
-	/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
-	ata_link_for_each_dev(dev, link)
-		if (classes[dev->devno] == ATA_DEV_UNKNOWN)
-			classes[dev->devno] = ATA_DEV_NONE;
-
-	return rc;
+	return reset(link, classes, deadline);
 }
 
 static int ata_eh_followup_srst_needed(struct ata_link *link,
@@ -2096,9 +2083,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ata_reset_fn_t reset;
 	unsigned long flags;
 	u32 sstatus;
-	int rc;
+	int nr_known, rc;
 
-	/* about to reset */
+	/*
+	 * Prepare to reset
+	 */
 	spin_lock_irqsave(ap->lock, flags);
 	ap->pflags |= ATA_PFLAG_RESETTING;
 	spin_unlock_irqrestore(ap->lock, flags);
@@ -2124,16 +2113,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ap->ops->set_piomode(ap, dev);
 	}
 
-	if (!softreset && !hardreset) {
-		if (verbose)
-			ata_link_printk(link, KERN_INFO, "no reset method "
-					"available, skipping reset\n");
-		if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
-			lflags |= ATA_LFLAG_ASSUME_ATA;
-		goto done;
-	}
-
 	/* prefer hardreset */
+	reset = NULL;
 	ehc->i.action &= ~ATA_EH_RESET;
 	if (hardreset) {
 		reset = hardreset;
@@ -2141,11 +2122,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	} else if (softreset) {
 		reset = softreset;
 		ehc->i.action = ATA_EH_SOFTRESET;
-	} else {
-		ata_link_printk(link, KERN_ERR, "BUG: no reset method, "
-				"please report to linux-ide@vger.kernel.org\n");
-		dump_stack();
-		return -EINVAL;
 	}
 
 	if (prereset) {
@@ -2165,21 +2141,28 @@ int ata_eh_reset(struct ata_link *link, int classify,
 					"prereset failed (errno=%d)\n", rc);
 			goto out;
 		}
-	}
 
-	/* prereset() might have cleared ATA_EH_RESET */
-	if (!(ehc->i.action & ATA_EH_RESET)) {
-		/* prereset told us not to reset, bang classes and return */
+		/* prereset() might have cleared ATA_EH_RESET.  If so,
+		 * bang classes and return.
+		 */
+		if (reset && !(ehc->i.action & ATA_EH_RESET)) {
 			ata_link_for_each_dev(dev, link)
 				classes[dev->devno] = ATA_DEV_NONE;
 			rc = 0;
 			goto out;
 		}
+	}
 
  retry:
+	/*
+	 * Perform reset
+	 */
+	if (ata_is_host_link(link))
+		ata_eh_freeze_port(ap);
+
 	deadline = jiffies + ata_eh_reset_timeouts[try++];
 
-	/* shut up during boot probing */
+	if (reset) {
 		if (verbose)
 			ata_link_printk(link, KERN_INFO, "%s resetting link\n",
 					reset == softreset ? "soft" : "hard");
@@ -2212,8 +2195,17 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		/* -EAGAIN can happen if we skipped followup SRST */
 		if (rc && rc != -EAGAIN)
 			goto fail;
+	} else {
+		if (verbose)
+			ata_link_printk(link, KERN_INFO, "no reset method "
+					"available, skipping reset\n");
+		if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
+			lflags |= ATA_LFLAG_ASSUME_ATA;
+	}
 
- done:
+	/*
+	 * Post-reset processing
+	 */
 	ata_link_for_each_dev(dev, link) {
 		/* After the reset, the device state is PIO 0 and the
 		 * controller state is undefined.  Reset also wakes up
@@ -2236,9 +2228,53 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
 		link->sata_spd = (sstatus >> 4) & 0xf;
 
+	/* thaw the port */
+	if (ata_is_host_link(link))
+		ata_eh_thaw_port(ap);
+
+	/* postreset() should clear hardware SError.  Although SError
+	 * is cleared during link resume, clearing SError here is
+	 * necessary as some PHYs raise hotplug events after SRST.
+	 * This introduces race condition where hotplug occurs between
+	 * reset and here.  This race is mediated by cross checking
+	 * link onlineness and classification result later.
+	 */
 	if (postreset)
 		postreset(link, classes);
 
+	/* clear cached SError */
+	spin_lock_irqsave(link->ap->lock, flags);
+	link->eh_info.serror = 0;
+	spin_unlock_irqrestore(link->ap->lock, flags);
+
+	/* Make sure onlineness and classification result correspond.
+	 * Hotplug could have happened during reset and some
+	 * controllers fail to wait while a drive is spinning up after
+	 * being hotplugged causing misdetection.  By cross checking
+	 * link onlineness and classification result, those conditions
+	 * can be reliably detected and retried.
+	 */
+	nr_known = 0;
+	ata_link_for_each_dev(dev, link) {
+		/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
+		if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+			classes[dev->devno] = ATA_DEV_NONE;
+		else
+			nr_known++;
+	}
+
+	if (classify && !nr_known && ata_link_online(link)) {
+		if (try < max_tries) {
+			ata_link_printk(link, KERN_WARNING, "link online but "
+				       "device misclassified, retrying\n");
+			rc = -EAGAIN;
+			goto fail;
+		}
+		ata_link_printk(link, KERN_WARNING,
+			       "link online but device misclassified, "
+			       "device detection might fail\n");
+	}
+
 	/* reset successful, schedule revalidation */
 	ata_eh_done(link, NULL, ATA_EH_RESET);
 	ehc->i.action |= ATA_EH_REVALIDATE;
@@ -2587,7 +2623,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	struct ata_link *link;
 	struct ata_device *dev;
 	int nr_failed_devs, nr_disabled_devs;
-	int reset, rc;
+	int rc;
 	unsigned long flags;
 
 	DPRINTK("ENTER\n");
@@ -2630,7 +2666,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	rc = 0;
 	nr_failed_devs = 0;
 	nr_disabled_devs = 0;
-	reset = 0;
 
 	/* if UNLOADING, finish immediately */
 	if (ap->pflags & ATA_PFLAG_UNLOADING)
@@ -2644,22 +2679,11 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		if (ata_eh_skip_recovery(link))
 			ehc->i.action = 0;
 
-		/* do we need to reset? */
-		if (ehc->i.action & ATA_EH_RESET)
-			reset = 1;
-
 		ata_link_for_each_dev(dev, link)
 			ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
 	}
 
 	/* reset */
-	if (reset) {
-		/* if PMP is attached, this function only deals with
-		 * downstream links, port should stay thawed.
-		 */
-		if (!sata_pmp_attached(ap))
-			ata_eh_freeze_port(ap);
-
 	ata_port_for_each_link(link, ap) {
 		struct ata_eh_context *ehc = &link->eh_context;
 
@@ -2667,8 +2691,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 			continue;
 
 		rc = ata_eh_reset(link, ata_link_nr_vacant(link),
-					  prereset, softreset, hardreset,
-					  postreset);
+				  prereset, softreset, hardreset, postreset);
 		if (rc) {
 			ata_link_printk(link, KERN_ERR,
 					"reset failed, giving up\n");
@@ -2676,10 +2699,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		}
 	}
 
-		if (!sata_pmp_attached(ap))
-			ata_eh_thaw_port(ap);
-	}
-
 	/* the rest */
 	ata_port_for_each_link(link, ap) {
 		struct ata_eh_context *ehc = &link->eh_context;

drivers/ata/libata-pmp.c

@@ -48,7 +48,7 @@ static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val)
 	tf.device = link->pmp;
 
 	err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
-				     SATA_PMP_SCR_TIMEOUT);
+				     SATA_PMP_RW_TIMEOUT);
 	if (err_mask)
 		return err_mask;
 
@@ -88,7 +88,7 @@ static unsigned int sata_pmp_write(struct ata_link *link, int reg, u32 val)
 	tf.lbah = (val >> 24) & 0xff;
 
 	return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
-				 SATA_PMP_SCR_TIMEOUT);
+				 SATA_PMP_RW_TIMEOUT);
 }
 
 /**
@@ -257,19 +257,6 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info)
 		goto fail;
 	}
 
-	/* turn off notification till fan-out ports are reset and configured */
-	if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
-		gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
-
-		err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_FEAT_EN,
-					  gscr[SATA_PMP_GSCR_FEAT_EN]);
-		if (err_mask) {
-			rc = -EIO;
-			reason = "failed to write GSCR_FEAT_EN";
-			goto fail;
-		}
-	}
-
 	if (print_info) {
 		ata_dev_printk(dev, KERN_INFO, "Port Multiplier %s, "
 			       "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
@@ -700,8 +687,6 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 	if (ehc->i.action & ATA_EH_RESET) {
 		struct ata_link *tlink;
 
-		ata_eh_freeze_port(ap);
-
 		/* reset */
 		rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
 				  postreset);
@@ -711,8 +696,6 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 			goto fail;
 		}
 
-		ata_eh_thaw_port(ap);
-
 		/* PMP is reset, SErrors cannot be trusted, scan all */
 		ata_port_for_each_link(tlink, ap) {
 			struct ata_eh_context *ehc = &tlink->eh_context;
@@ -864,6 +847,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 	struct ata_link *pmp_link = &ap->link;
 	struct ata_device *pmp_dev = pmp_link->device;
 	struct ata_eh_context *pmp_ehc = &pmp_link->eh_context;
+	u32 *gscr = pmp_dev->gscr;
 	struct ata_link *link;
 	struct ata_device *dev;
 	unsigned int err_mask;
@@ -901,6 +885,22 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 	if (rc)
 		goto pmp_fail;
 
+	/* PHY event notification can disturb reset and other recovery
+	 * operations.  Turn it off.
+	 */
+	if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
+		gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
+
+		err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+					  gscr[SATA_PMP_GSCR_FEAT_EN]);
+		if (err_mask) {
+			ata_link_printk(pmp_link, KERN_WARNING,
+				"failed to disable NOTIFY (err_mask=0x%x)\n",
+				err_mask);
+			goto pmp_fail;
+		}
+	}
+
 	/* handle disabled links */
 	rc = sata_pmp_eh_handle_disabled_links(ap);
 	if (rc)
@@ -923,10 +923,10 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 
 	/* enable notification */
 	if (pmp_dev->flags & ATA_DFLAG_AN) {
-		pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
+		gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
 
-		err_mask = sata_pmp_write(pmp_dev->link, SATA_PMP_GSCR_FEAT_EN,
-					  pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN]);
+		err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+					  gscr[SATA_PMP_GSCR_FEAT_EN]);
 		if (err_mask) {
 			ata_dev_printk(pmp_dev, KERN_ERR, "failed to write "
 				       "PMP_FEAT_EN (Emask=0x%x)\n", err_mask);

drivers/ata/libata-scsi.c

@@ -1082,12 +1082,6 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 	if (((cdb[4] >> 4) & 0xf) != 0)
 		goto invalid_fld;       /* power conditions not supported */
 
-	if (qc->dev->horkage & ATA_HORKAGE_SKIP_PM) {
-		/* the device lacks PM support, finish without doing anything */
-		scmd->result = SAM_STAT_GOOD;
-		return 1;
-	}
-
 	if (cdb[4] & 0x1) {
 		tf->nsect = 1;	/* 1 sector, lba=0 */
 

drivers/ata/pata_ali.c

@@ -177,11 +177,11 @@ static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, stru
 	u8 udma;
 
 	if (t != NULL) {
-		t->setup = FIT(t->setup, 1, 8) & 7;
-		t->act8b = FIT(t->act8b, 1, 8) & 7;
-		t->rec8b = FIT(t->rec8b, 1, 16) & 15;
-		t->active = FIT(t->active, 1, 8) & 7;
-		t->recover = FIT(t->recover, 1, 16) & 15;
+		t->setup = clamp_val(t->setup, 1, 8) & 7;
+		t->act8b = clamp_val(t->act8b, 1, 8) & 7;
+		t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
+		t->active = clamp_val(t->active, 1, 8) & 7;
+		t->recover = clamp_val(t->recover, 1, 16) & 15;
 
 		pci_write_config_byte(pdev, cas, t->setup);
 		pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);

drivers/ata/pata_amd.c

@@ -84,32 +84,32 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
 
 	/* Configure the address set up timing */
 	pci_read_config_byte(pdev, offset + 0x0C, &t);
-	t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
+	t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
 	pci_write_config_byte(pdev, offset + 0x0C , t);
 
 	/* Configure the 8bit I/O timing */
 	pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
-		((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
+		((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1));
 
 	/* Drive timing */
 	pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
-		((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
+		((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1));
 
 	switch (clock) {
 		case 1:
-		t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
+		t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03;
 		break;
 
 		case 2:
-		t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
+		t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03;
 		break;
 
 		case 3:
-		t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
+		t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03;
 		break;
 
 		case 4:
-		t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
+		t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03;
 		break;
 
 		default:

drivers/ata/pata_at32.c

@@ -291,8 +291,6 @@ static int __init pata_at32_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
-	memset(info, 0, sizeof(struct at32_ide_info));
-
 	info->irq = irq;
 	info->cs  = board->cs;
 

drivers/ata/pata_bf54x.c

@@ -911,6 +911,9 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
 	/* Reset all transfer count */
 	ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST);
 
+	/* Set ATAPI state machine contorl in terminate sequence */
+	ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM);
+
 	/* Set transfer length to buffer len */
 	for_each_sg(qc->sg, sg, qc->n_elem, si) {
 		ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));

drivers/ata/pata_cypress.c

@@ -62,14 +62,14 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		return;
 	}
 
-	time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
-	time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
+	time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4);
+	time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4);
 
 	if (adev->devno == 0) {
 		pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
 
 		addr &= ~0x0F;	/* Mask bits */
-		addr |= FIT(t.setup, 0, 15);
+		addr |= clamp_val(t.setup, 0, 15);
 
 		pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
 		pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
@@ -79,7 +79,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
 
 		addr &= ~0xF0;	/* Mask bits */
-		addr |= (FIT(t.setup, 0, 15) << 4);
+		addr |= (clamp_val(t.setup, 0, 15) << 4);
 
 		pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
 		pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);

drivers/ata/pata_legacy.c

@@ -343,8 +343,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	/* Get the timing data in cycles. For now play safe at 50Mhz */
 	ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
 
-	active = FIT(t.active, 2, 15);
-	recover = FIT(t.recover, 4, 15);
+	active = clamp_val(t.active, 2, 15);
+	recover = clamp_val(t.recover, 4, 15);
 
 	inb(0x3E6);
 	inb(0x3E6);
@@ -377,8 +377,8 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	/* Get the timing data in cycles. For now play safe at 50Mhz */
 	ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
 
-	active = FIT(t.active, 2, 15);
-	recover = FIT(t.recover, 2, 16);
+	active = clamp_val(t.active, 2, 15);
+	recover = clamp_val(t.recover, 2, 16);
 	recover &= 0x15;
 
 	inb(0x3E6);
@@ -462,9 +462,9 @@ static void opti82c611a_set_piomode(struct ata_port *ap,
 		ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
 	}
 
-	active = FIT(t.active, 2, 17) - 2;
-	recover = FIT(t.recover, 1, 16) - 1;
-	setup = FIT(t.setup, 1, 4) - 1;
+	active = clamp_val(t.active, 2, 17) - 2;
+	recover = clamp_val(t.recover, 1, 16) - 1;
+	setup = clamp_val(t.setup, 1, 4) - 1;
 
 	/* Select the right timing bank for write timing */
 	rc = ioread8(ap->ioaddr.lbal_addr);
@@ -541,9 +541,9 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
 	}
 
-	active = FIT(t.active, 2, 17) - 2;
-	recover = FIT(t.recover, 1, 16) - 1;
-	setup = FIT(t.setup, 1, 4) - 1;
+	active = clamp_val(t.active, 2, 17) - 2;
+	recover = clamp_val(t.recover, 1, 16) - 1;
+	setup = clamp_val(t.setup, 1, 4) - 1;
 
 	/* Select the right timing bank for write timing */
 	rc = ioread8(ap->ioaddr.lbal_addr);
@@ -624,11 +624,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 
 	if (ld_qdi->fast) {
-		active = 8 - FIT(t.active, 1, 8);
-		recovery = 18 - FIT(t.recover, 3, 18);
+		active = 8 - clamp_val(t.active, 1, 8);
+		recovery = 18 - clamp_val(t.recover, 3, 18);
 	} else {
-		active = 9 - FIT(t.active, 2, 9);
-		recovery = 15 - FIT(t.recover, 0, 15);
+		active = 9 - clamp_val(t.active, 2, 9);
+		recovery = 15 - clamp_val(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;
 
@@ -658,11 +658,11 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 
 	if (ld_qdi->fast) {
-		active = 8 - FIT(t.active, 1, 8);
-		recovery = 18 - FIT(t.recover, 3, 18);
+		active = 8 - clamp_val(t.active, 1, 8);
+		recovery = 18 - clamp_val(t.recover, 3, 18);
 	} else {
-		active = 9 - FIT(t.active, 2, 9);
-		recovery = 15 - FIT(t.recover, 0, 15);
+		active = 9 - clamp_val(t.active, 2, 9);
+		recovery = 15 - clamp_val(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;
 
@@ -695,11 +695,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 
 	if (ld_qdi->fast) {
-		active = 8 - FIT(t.active, 1, 8);
-		recovery = 18 - FIT(t.recover, 3, 18);
+		active = 8 - clamp_val(t.active, 1, 8);
+		recovery = 18 - clamp_val(t.recover, 3, 18);
 	} else {
-		active = 9 - FIT(t.active, 2, 9);
-		recovery = 15 - FIT(t.recover, 0, 15);
+		active = 9 - clamp_val(t.active, 2, 9);
+		recovery = 15 - clamp_val(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;
 	ld_qdi->clock[adev->devno] = timing;
@@ -830,8 +830,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	else
 		ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 
-	active = (FIT(t.active, 3, 17) - 1) & 0x0F;
-	recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+	active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+	recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
 	timing = (active << 4) | recovery;
 	winbond_writecfg(ld_winbond->timing, timing, reg);
 
@@ -842,7 +842,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		reg |= 0x08;	/* FIFO off */
 	if (!ata_pio_need_iordy(adev))
 		reg |= 0x02;	/* IORDY off */
-	reg |= (FIT(t.setup, 0, 3) << 6);
+	reg |= (clamp_val(t.setup, 0, 3) << 6);
 	winbond_writecfg(ld_winbond->timing, timing + 1, reg);
 }
 

drivers/ata/pata_ns87410.c

@@ -91,9 +91,9 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		return;
 	}
 
-	at.active = FIT(at.active, 2, 16) - 2;
-	at.setup = FIT(at.setup, 1, 4) - 1;
-	at.recover = FIT(at.recover, 1, 12) - 1;
+	at.active = clamp_val(at.active, 2, 16) - 2;
+	at.setup = clamp_val(at.setup, 1, 4) - 1;
+	at.recover = clamp_val(at.recover, 1, 12) - 1;
 
 	idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];
 

drivers/ata/pata_ns87415.c

@@ -66,8 +66,8 @@ static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
 
 	ata_timing_compute(adev, adev->pio_mode, &t, T, 0);
 
-	clocking = 17 - FIT(t.active, 2, 17);
-	clocking |= (16 - FIT(t.recover, 1, 16)) << 4;
+	clocking = 17 - clamp_val(t.active, 2, 17);
+	clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4;
  	/* Use the same timing for read and write bytes */
 	clocking |= (clocking << 8);
 	pci_write_config_word(dev, timing, clocking);

drivers/ata/pata_qdi.c

@@ -60,11 +60,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 
 	if (qdi->fast) {
-		active = 8 - FIT(t.active, 1, 8);
-		recovery = 18 - FIT(t.recover, 3, 18);
+		active = 8 - clamp_val(t.active, 1, 8);
+		recovery = 18 - clamp_val(t.recover, 3, 18);
 	} else {
-		active = 9 - FIT(t.active, 2, 9);
-		recovery = 15 - FIT(t.recover, 0, 15);
+		active = 9 - clamp_val(t.active, 2, 9);
+		recovery = 15 - clamp_val(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;
 
@@ -84,11 +84,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 
 	if (qdi->fast) {
-		active = 8 - FIT(t.active, 1, 8);
-		recovery = 18 - FIT(t.recover, 3, 18);
+		active = 8 - clamp_val(t.active, 1, 8);
+		recovery = 18 - clamp_val(t.recover, 3, 18);
 	} else {
-		active = 9 - FIT(t.active, 2, 9);
-		recovery = 15 - FIT(t.recover, 0, 15);
+		active = 9 - clamp_val(t.active, 2, 9);
+		recovery = 15 - clamp_val(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;
 

drivers/ata/pata_via.c

@@ -259,15 +259,15 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
 
 		pci_read_config_byte(pdev, 0x4C, &setup);
 		setup &= ~(3 << shift);
-		setup |= FIT(t.setup, 1, 4) << shift;	/* 1,4 or 1,4 - 1  FIXME */
+		setup |= clamp_val(t.setup, 1, 4) << shift;	/* 1,4 or 1,4 - 1  FIXME */
 		pci_write_config_byte(pdev, 0x4C, setup);
 	}
 
 	/* Load the PIO mode bits */
 	pci_write_config_byte(pdev, 0x4F - ap->port_no,
-		((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
+		((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
 	pci_write_config_byte(pdev, 0x48 + offset,
-		((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
+		((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
 
 	/* Load the UDMA bits according to type */
 	switch(udma_type) {
@@ -275,16 +275,16 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
 			/* BUG() ? */
 			/* fall through */
 		case 33:
-			ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
+			ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
 			break;
 		case 66:
-			ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
+			ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
 			break;
 		case 100:
-			ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+			ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
 			break;
 		case 133:
-			ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+			ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
 			break;
 	}
 

drivers/ata/pata_winbond.c

@@ -75,8 +75,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	else
 		ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
 
-	active = (FIT(t.active, 3, 17) - 1) & 0x0F;
-	recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+	active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+	recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
 	timing = (active << 4) | recovery;
 	winbond_writecfg(winbond->config, timing, reg);
 
@@ -87,7 +87,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		reg |= 0x08;	/* FIFO off */
 	if (!ata_pio_need_iordy(adev))
 		reg |= 0x02;	/* IORDY off */
-	reg |= (FIT(t.setup, 0, 3) << 6);
+	reg |= (clamp_val(t.setup, 0, 3) << 6);
 	winbond_writecfg(winbond->config, timing + 1, reg);
 }
 

drivers/ata/sata_sil24.c

@@ -899,14 +899,25 @@ static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
 
 static void sil24_pmp_attach(struct ata_port *ap)
 {
+	u32 *gscr = ap->link.device->gscr;
+
 	sil24_config_pmp(ap, 1);
 	sil24_init_port(ap);
+
+	if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
+	    sata_pmp_gscr_devid(gscr) == 0x4140) {
+		ata_port_printk(ap, KERN_INFO,
+			"disabling NCQ support due to sil24-mv4140 quirk\n");
+		ap->flags &= ~ATA_FLAG_NCQ;
+	}
 }
 
 static void sil24_pmp_detach(struct ata_port *ap)
 {
 	sil24_init_port(ap);
 	sil24_config_pmp(ap, 0);
+
+	ap->flags |= ATA_FLAG_NCQ;
 }
 
 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,

include/linux/libata.h

@@ -341,7 +341,7 @@ enum {
 	ATA_EH_PMP_TRIES	= 5,
 	ATA_EH_PMP_LINK_TRIES	= 3,
 
-	SATA_PMP_SCR_TIMEOUT	= 250,
+	SATA_PMP_RW_TIMEOUT	= 3000,		/* PMP read/write timeout */
 
 	/* Horkage types. May be set by libata or controller on drives
 	   (some horkage may be drive/controller pair dependant */
@@ -351,7 +351,7 @@ enum {
 	ATA_HORKAGE_NONCQ	= (1 << 2),	/* Don't use NCQ */
 	ATA_HORKAGE_MAX_SEC_128	= (1 << 3),	/* Limit max sects to 128 */
 	ATA_HORKAGE_BROKEN_HPA	= (1 << 4),	/* Broken HPA */
-	ATA_HORKAGE_SKIP_PM	= (1 << 5),	/* Skip PM operations */
+	ATA_HORKAGE_DISABLE	= (1 << 5),	/* Disable it */
 	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
 	ATA_HORKAGE_IPM		= (1 << 7),	/* Link PM problems */
 	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
@@ -821,8 +821,6 @@ struct ata_timing {
 	unsigned short udma;		/* t2CYCTYP/2 */
 };
 
-#define FIT(v, vmin, vmax)	max_t(short, min_t(short, v, vmax), vmin)
-
 /*
  * Core layer - drivers/ata/libata-core.c
  */