Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A smallish batch of fixes, a little more than expected this late, but
  all fixes are contained to their platforms and seem reasonably low
  risk:

   - a somewhat large SMP fix for ux500 that still seemed warranted to
     include here
   - OMAP DT fixes for pbias regulator specification that broke due to
     some DT reshuffling
   - PCIe IRQ routing bugfix for i.MX
   - networking fixes for keystone
   - runtime PM for OMAP GPMC
   - a couple of error path bug fixes for exynos"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio
  memory: omap-gpmc: Don't try to save uninitialized GPMC context
  ARM: imx6: correct i.MX6 PCIe interrupt routing
  ARM: ux500: add an SMP enablement type and move cpu nodes
  ARM: dts: dra7: Fix broken pbias device creation
  ARM: dts: OMAP5: Fix broken pbias device creation
  ARM: dts: OMAP4: Fix broken pbias device creation
  ARM: dts: omap243x: Fix broken pbias device creation
  ARM: EXYNOS: fix double of_node_put() on error path
  ARM: EXYNOS: Fix potentian kfree() of ro memory

Documentation/devicetree/bindings/arm/cpus.txt

@@ -199,6 +199,7 @@ nodes to be present and contain the properties described below.
 			    "qcom,kpss-acc-v1"
 			    "qcom,kpss-acc-v2"
 			    "rockchip,rk3066-smp"
+			    "ste,dbx500-smp"
 
 	- cpu-release-addr
 		Usage: required for systems that have an "enable-method"

arch/arm/boot/dts/dra7.dtsi

@@ -116,7 +116,7 @@ scm: scm@2000 {
 				ranges = <0 0x2000 0x2000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x1400>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/imx6qdl.dtsi

@@ -181,10 +181,10 @@ pcie: pcie@0x01000000 {
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;

arch/arm/boot/dts/k2e.dtsi

@@ -131,10 +131,17 @@ pcie_intc1: legacy-interrupt-controller {
 					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
 			};
 		};
+
+		mdio: mdio@24200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x24200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
 		/include/ "k2e-netcp.dtsi"
 	};
 };
-
-&mdio {
-	reg = <0x24200f00 0x100>;
-};

arch/arm/boot/dts/k2hk.dtsi

@@ -98,6 +98,17 @@ dspgpio7: keystone_dsp_gpio@262025c {
 			#gpio-cells = <2>;
 			gpio,syscon-dev = <&devctrl 0x25c>;
 		};
+
+		mdio: mdio@02090300 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02090300 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
 		/include/ "k2hk-netcp.dtsi"
 	};
 };

arch/arm/boot/dts/k2l.dtsi

@@ -29,7 +29,6 @@ cpu@1 {
 	};
 
 	soc {
-
 		/include/ "k2l-clocks.dtsi"
 
 		uart2: serial@02348400 {
@@ -79,6 +78,17 @@ dspgpio3: keystone_dsp_gpio@262024c {
 			#gpio-cells = <2>;
 			gpio,syscon-dev = <&devctrl 0x24c>;
 		};
+
+		mdio: mdio@26200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x26200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
 		/include/ "k2l-netcp.dtsi"
 	};
 };
@@ -96,7 +106,3 @@ &spi2 {
        /* Pin muxed. Enabled and configured by Bootloader */
        status = "disabled";
 };
-
-&mdio {
-	reg = <0x26200f00 0x100>;
-};

arch/arm/boot/dts/keystone.dtsi

@@ -267,17 +267,6 @@ aemif: aemif@21000A00 {
 				  1 0 0x21000A00 0x00000100>;
 		};
 
-		mdio: mdio@02090300 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg		= <0x02090300 0x100>;
-			status = "disabled";
-			clocks = <&clkpa>;
-			clock-names = "fck";
-			bus_freq	= <2500000>;
-		};
-
 		kirq0: keystone_irq@26202a0 {
 			compatible = "ti,keystone-irq";
 			interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;

arch/arm/boot/dts/omap2430.dtsi

@@ -51,7 +51,8 @@ omap2430_pmx: pinmux@30 {
 				};
 
 				scm_conf: scm_conf@270 {
-					compatible = "syscon";
+					compatible = "syscon",
+						     "simple-bus";
 					reg = <0x270 0x240>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/omap4.dtsi

@@ -191,7 +191,8 @@ omap4_pmx_core: pinmux@40 {
 				};
 
 				omap4_padconf_global: omap4_padconf_global@5a0 {
-					compatible = "syscon";
+					compatible = "syscon",
+						     "simple-bus";
 					reg = <0x5a0 0x170>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/omap5.dtsi

@@ -180,7 +180,8 @@ omap5_pmx_core: pinmux@40 {
 				};
 
 				omap5_padconf_global: omap5_padconf_global@5a0 {
-					compatible = "syscon";
+					compatible = "syscon",
+						     "simple-bus";
 					reg = <0x5a0 0xec>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -15,6 +15,33 @@
 #include "skeleton.dtsi"
 
 / {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "ste,dbx500-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x300>;
+		};
+		CPU1: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x301>;
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -22,32 +49,6 @@ soc {
 		interrupt-parent = <&intc>;
 		ranges;
 
-		cpus {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cpu-map {
-				cluster0 {
-					core0 {
-						cpu = <&CPU0>;
-					};
-					core1 {
-						cpu = <&CPU1>;
-					};
-				};
-			};
-			CPU0: cpu@0 {
-				device_type = "cpu";
-				compatible = "arm,cortex-a9";
-				reg = <0>;
-			};
-			CPU1: cpu@1 {
-				device_type = "cpu";
-				compatible = "arm,cortex-a9";
-				reg = <1>;
-			};
-		};
-
 		ptm@801ae000 {
 			compatible = "arm,coresight-etm3x", "arm,primecell";
 			reg = <0x801ae000 0x1000>;

arch/arm/mach-exynos/pm_domains.c

@@ -146,9 +146,8 @@ static __init int exynos4_pm_init_power_domain(void)
 		pd->base = of_iomap(np, 0);
 		if (!pd->base) {
 			pr_warn("%s: failed to map memory\n", __func__);
-			kfree(pd->pd.name);
+			kfree_const(pd->pd.name);
 			kfree(pd);
-			of_node_put(np);
 			continue;
 		}
 

drivers/memory/omap-gpmc.c

@@ -2245,6 +2245,9 @@ void omap3_gpmc_save_context(void)
 {
 	int i;
 
+	if (!gpmc_base)
+		return;
+
 	gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
 	gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
 	gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
@@ -2277,6 +2280,9 @@ void omap3_gpmc_restore_context(void)
 {
 	int i;
 
+	if (!gpmc_base)
+		return;
+
 	gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
 	gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
 	gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);