USB: remove info() macro from usb input drivers

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/input/joystick/xpad.c

@@ -911,7 +911,7 @@ static int __init usb_xpad_init(void)
 {
 	int result = usb_register(&xpad_driver);
 	if (result == 0)
-		info(DRIVER_DESC);
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 	return result;
 }
 

drivers/input/misc/ati_remote.c

@@ -834,9 +834,11 @@ static int __init ati_remote_init(void)
 
 	result = usb_register(&ati_remote_driver);
 	if (result)
-		err("usb_register error #%d\n", result);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": usb_register error #%d\n", result);
 	else
-		info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION);
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+		       DRIVER_DESC "\n");
 
 	return result;
 }

drivers/input/misc/yealink.c

@@ -999,7 +999,8 @@ static int __init yealink_dev_init(void)
 {
 	int ret = usb_register(&yealink_driver);
 	if (ret == 0)
-		info(DRIVER_DESC ":" DRIVER_VERSION);
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+		       DRIVER_DESC "\n");
 	return ret;
 }
 

drivers/input/tablet/acecad.c

@@ -280,7 +280,8 @@ static int __init usb_acecad_init(void)
 {
 	int result = usb_register(&usb_acecad_driver);
 	if (result == 0)
-		info(DRIVER_VERSION ":" DRIVER_DESC);
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+		       DRIVER_DESC "\n");
 	return result;
 }
 

drivers/input/tablet/aiptek.c

@@ -1844,8 +1844,9 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		aiptek->curSetting.programmableDelay = speeds[i];
 		(void)aiptek_program_tablet(aiptek);
 		if (aiptek->inputdev->absmax[ABS_X] > 0) {
-			info("input: Aiptek using %d ms programming speed\n",
-			     aiptek->curSetting.programmableDelay);
+			dev_info(&intf->dev,
+				 "Aiptek using %d ms programming speed\n",
+				 aiptek->curSetting.programmableDelay);
 			break;
 		}
 	}
@@ -1853,7 +1854,8 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	/* Murphy says that some day someone will have a tablet that fails the
 	   above test. That's you, Frederic Rodrigo */
 	if (i == ARRAY_SIZE(speeds)) {
-		info("input: Aiptek tried all speeds, no sane response");
+		dev_info(&intf->dev,
+			 "Aiptek tried all speeds, no sane response\n");
 		goto fail2;
 	}
 
@@ -1925,8 +1927,9 @@ static int __init aiptek_init(void)
 {
 	int result = usb_register(&aiptek_driver);
 	if (result == 0) {
-		info(DRIVER_VERSION ": " DRIVER_AUTHOR);
-		info(DRIVER_DESC);
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+		       DRIVER_DESC "\n");
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_AUTHOR "\n");
 	}
 	return result;
 }

drivers/input/tablet/gtco.c

@@ -2,7 +2,7 @@
 
 GTCO digitizer USB driver
 
-Use the err(), dbg() and info() macros from usb.h for system logging
+Use the err() and dbg() macros from usb.h for system logging
 
 TO CHECK:  Is pressure done right on report 5?
 
@@ -1010,7 +1010,7 @@ static void gtco_disconnect(struct usb_interface *interface)
 		kfree(gtco);
 	}
 
-	info("gtco driver disconnected");
+	dev_info(&interface->dev, "gtco driver disconnected\n");
 }
 
 /*   STANDARD MODULE LOAD ROUTINES  */

drivers/input/tablet/kbtab.c

@@ -215,7 +215,8 @@ static int __init kbtab_init(void)
 	retval = usb_register(&kbtab_driver);
 	if (retval)
 		goto out;
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 out:
 	return retval;
 }

drivers/input/tablet/wacom_sys.c

@@ -385,7 +385,8 @@ static int __init wacom_init(void)
 	wacom_driver.id_table = get_device_table();
 	result = usb_register(&wacom_driver);
 	if (result == 0)
-		info(DRIVER_VERSION ":" DRIVER_DESC);
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+		       DRIVER_DESC "\n");
 	return result;
 }