mtd: nand: denali: change the setup_dma choice into hook

The previous commit added some hooks into struct denali_nand_info,
so here is one more for clean-up.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drivers/mtd/nand/denali.c

@@ -519,15 +519,6 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
 	denali->host_write(denali, mode | 0x14000, 0x2400);
 }
 
-static void denali_setup_dma(struct denali_nand_info *denali,
-			     dma_addr_t dma_addr, int page, int write)
-{
-	if (denali->caps & DENALI_CAP_DMA_64BIT)
-		denali_setup_dma64(denali, dma_addr, page, write);
-	else
-		denali_setup_dma32(denali, dma_addr, page, write);
-}
-
 static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 			   size_t size, int page, int raw)
 {
@@ -619,7 +610,7 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 	iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE);
 
 	denali_reset_irq(denali);
-	denali_setup_dma(denali, dma_addr, page, write);
+	denali->setup_dma(denali, dma_addr, page, write);
 
 	irq_status = denali_wait_for_irq(denali, irq_mask);
 	if (!(irq_status & INTR__DMA_CMD_COMP))
@@ -1314,6 +1305,10 @@ int denali_init(struct denali_nand_info *denali)
 	if (denali->dma_avail) {
 		chip->options |= NAND_USE_BOUNCE_BUFFER;
 		chip->buf_align = 16;
+		if (denali->caps & DENALI_CAP_DMA_64BIT)
+			denali->setup_dma = denali_setup_dma64;
+		else
+			denali->setup_dma = denali_setup_dma32;
 	}
 
 	chip->bbt_options |= NAND_BBT_USE_FLASH;

drivers/mtd/nand/denali.h

@@ -321,6 +321,8 @@ struct denali_nand_info {
 	const struct nand_ecc_caps *ecc_caps;
 	u32 (*host_read)(struct denali_nand_info *denali, u32 addr);
 	void (*host_write)(struct denali_nand_info *denali, u32 addr, u32 data);
+	void (*setup_dma)(struct denali_nand_info *denali, dma_addr_t dma_addr,
+			  int page, int write);
 };
 
 #define DENALI_CAP_HW_ECC_FIXUP			BIT(0)