Skip to content

L
linux
Commit 8a6f3cd7 authored by Mark W. McClelland's avatar Mark W. McClelland Committed by Greg Kroah-Hartman
Browse files
Options

[PATCH] ov511 1.62 for 2.5.34 

 Update the ov511 driver to version 1.62:
 o Update email address
 o Remove some dead code and fix some harmless typos
 o New device: Alpha Vision Tech. AlphaCam SE
 o Fix assignment of ov->proc_button->owner to not cause
   NULL pointer deref (credit: Oleg K.)
 o Support I2C read/write ioctl()s via V4L (credit: Oleg K.)
 o Add OV518-specific register dump code
 o New snapshot reset sequence; old one was causing
   erroneous I2C writes (credit: Oleg K.)
 o OV6630 needs different register 0x14 settings than OV6620
 o Don't print palette errors by default
 o Detect OV518 cameras that have packet numbering enabled
   by default and set ov->packet_numbering accordingly. This
   should fix the problems some users were having with babble
   (USB error -75) and cameras not working at all.
parent dfd47943
Show whitespace changes
Inline Side-by-side
Showing with 106 additions and 126 deletions
Documentation/usb/ov511.txt
View file @ 8a6f3cd7
......@@ -105,15 +105,6 @@ MODULE PARAMETERS:
4=most function calls and data parsing messages
5=highly repetitive mesgs
NAME: fix_rgb_offset
TYPE: integer (Boolean)
DEFAULT: 0
DESC: Some people have reported that the blue component of the image is one
or so lines higher than the red component. This is only apparent in
images with white objects on black backgrounds at 640x480. Setting this
to 1 will realign the color planes correctly. NOTE: You will likely
need a fast (500 MHz) CPU.
NAME: snapshot
TYPE: integer (Boolean)
DEFAULT: 0
......@@ -121,13 +112,6 @@ MODULE PARAMETERS:
the snapshot button is pressed. Note: enabling this mode disables
/proc/video/ov511/<minor#>/button
NAME: force_rgb (Deprecated; may be removed in the future)
TYPE: integer (Boolean)
DEFAULT: 0
DESC: Force image to be read in RGB instead of BGR. This option allow
programs that expect RGB data (e.g. gqcam) to work with this driver. If
your colors look VERY wrong, you may want to change this.
NAME: cams
TYPE: integer (1-4 for OV511, 1-31 for OV511+)
DEFAULT: 1
......@@ -234,12 +218,7 @@ MODULE PARAMETERS:
greyscale mode with a color camera, for example. Supported modes are:
0 (Allows all the following formats)
1 VIDEO_PALETTE_GREY (Linear greyscale)
3 VIDEO_PALETTE_RGB565 (565 16 bit RGB)
4 VIDEO_PALETTE_RGB24 (24bit RGB)
7 VIDEO_PALETTE_YUV422 (YUV422 capture)
8 VIDEO_PALETTE_YUYV (YUV422 capture; same as 7)
10 VIDEO_PALETTE_YUV420 (YUV 4:2:0 Planar)
13 VIDEO_PALETTE_YUV422P (YUV 4:2:2 Planar)
15 VIDEO_PALETTE_YUV420P (YUV 4:2:0 Planar, same as 10)
NAME: backlight
......@@ -278,29 +257,17 @@ MODULE PARAMETERS:
WORKING FEATURES:
o Color streaming/capture at most widths and heights that are multiples of 8.
o RGB24, RGB565, YUV420/YUV420P, YUV422/YUYV, and YUV422P color
o Monochrome (use force_palette=1 to enable)
o Setting/getting of saturation, contrast, brightness, and hue (only some of
them work the OV7620 and OV7620AE)
o /proc status reporting
o SAA7111A video capture support at 320x240 and 640x480
o Compression support
EXPERIMENTAL FEATURES:
o OV518/OV518+ support
o OV6630 sensor support
o Banding filter
o SMP compatibility
TO-DO:
o V4L2 support (This will be done after the next kernel patch release)
o Setting of hue not working with OV7620
o Setting of contrast and hue not working with OV7620AE
o OV8600 sensor support (Not used in anything yet)
HOW TO CONTACT ME:
You can email me at mmcclell@bigfoot.com . Please prefix the subject line
You can email me at mark@alpha.dyndns.org . Please prefix the subject line
with "OV511: " so that I am certain to notice your message.
CREDITS:
......
drivers/usb/media/ov511.c
View file @ 8a6f3cd7
......@@ -60,9 +60,9 @@
/*
* Version Information
*/
#define DRIVER_VERSION "v1.61 for Linux 2.5"
#define EMAIL "mmcclell@bigfoot.com"
#define DRIVER_AUTHOR "Mark McClelland <mmcclell@bigfoot.com> & Bret Wallach \
#define DRIVER_VERSION "v1.62 for Linux 2.5"
#define EMAIL "mark@alpha.dyndns.org"
#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org> & Bret Wallach \
& Orion Sky Lawlor <olawlor@acm.org> & Kevin Moore & Charl P. Botha \
<cpbotha@ieee.org> & Claudio Matsuoka <claudio@conectiva.com>"
#define DRIVER_DESC "ov511 USB Camera Driver"
......@@ -97,7 +97,6 @@ static int snapshot;
static int cams = 1;
static int compress;
static int testpat;
static int sensor_gbr;
static int dumppix;
static int led = 1;
static int dump_bridge;
......@@ -113,16 +112,9 @@ static int qvy = 0x04;
static int qvuv = 0x04;
static int lightfreq;
static int bandingfilter;
/* Pixel clock divisor */
static int clockdiv = -1;
/* Isoc packet size */
static int packetsize = -1;
/* Frame drop register (16h) */
static int framedrop = -1;
static int fastset;
static int force_palette;
static int backlight;
......@@ -268,6 +260,7 @@ static struct symbolic_list camlist[] = {
{ 102, "AverMedia InterCam Elite" },
{ 112, "MediaForte MV300" }, /* or OV7110 evaluation kit */
{ 192, "Webeye 2000B" },
{ 253, "Alpha Vision Tech. AlphaCam SE" },
{ -1, NULL }
};
......@@ -558,8 +551,8 @@ create_proc_ov511_cam(struct usb_ov511 *ov)
ov511_read_proc_button, ov);
if (!ov->proc_button)
return;
}
ov->proc_button->owner = THIS_MODULE;
}
/* Create "control" entry (ioctl() interface) */
PDEBUG(4, "creating /proc/video/ov511/%s/control", dirname);
......@@ -1137,8 +1130,6 @@ i2c_set_slave_internal(struct usb_ov511 *ov, unsigned char slave)
return 0;
}
#if defined(CONFIG_PROC_FS) && defined(CONFIG_VIDEO_PROC_FS)
/* Write to a specific I2C slave ID and register, using the specified mask */
static int
i2c_w_slave(struct usb_ov511 *ov,
......@@ -1194,8 +1185,6 @@ i2c_r_slave(struct usb_ov511 *ov,
return rc;
}
#endif /* defined(CONFIG_PROC_FS) && defined(CONFIG_VIDEO_PROC_FS) */
/* Sets I2C read and write slave IDs. Returns <0 for error */
static int
ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid)
......@@ -1241,8 +1230,7 @@ write_regvals(struct usb_ov511 *ov, struct ov511_regvals * pRegvals)
static void
dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn)
{
int i;
int rc;
int i, rc;
for (i = reg1; i <= regn; i++) {
rc = i2c_r(ov, i);
......@@ -1260,8 +1248,7 @@ dump_i2c_regs(struct usb_ov511 *ov)
static void
dump_reg_range(struct usb_ov511 *ov, int reg1, int regn)
{
int i;
int rc;
int i, rc;
for (i = reg1; i <= regn; i++) {
rc = reg_r(ov, i);
......@@ -1269,7 +1256,6 @@ dump_reg_range(struct usb_ov511 *ov, int reg1, int regn)
}
}
/* FIXME: Should there be an OV518 version of this? */
static void
ov511_dump_regs(struct usb_ov511 *ov)
{
......@@ -1295,6 +1281,31 @@ ov511_dump_regs(struct usb_ov511 *ov)
dump_reg_range(ov, 0xa0, 0xbf);
}
static void
ov518_dump_regs(struct usb_ov511 *ov)
{
info("VIDEO MODE REGS");
dump_reg_range(ov, 0x20, 0x2f);
info("DATA PUMP AND SNAPSHOT REGS");
dump_reg_range(ov, 0x30, 0x3f);
info("I2C REGS");
dump_reg_range(ov, 0x40, 0x4f);
info("SYSTEM CONTROL AND VENDOR REGS");
dump_reg_range(ov, 0x50, 0x5f);
info("60 - 6F");
dump_reg_range(ov, 0x60, 0x6f);
info("70 - 7F");
dump_reg_range(ov, 0x70, 0x7f);
info("Y QUANTIZATION TABLE");
dump_reg_range(ov, 0x80, 0x8f);
info("UV QUANTIZATION TABLE");
dump_reg_range(ov, 0x90, 0x9f);
info("A0 - BF");
dump_reg_range(ov, 0xa0, 0xbf);
info("CBR");
dump_reg_range(ov, 0xc0, 0xcf);
}
#endif
/*****************************************************************************/
......@@ -1336,9 +1347,9 @@ static void
ov51x_clear_snapshot(struct usb_ov511 *ov)
{
if (ov->bclass == BCL_OV511) {
reg_w(ov, R51x_SYS_SNAP, 0x01);
reg_w(ov, R51x_SYS_SNAP, 0x03);
reg_w(ov, R51x_SYS_SNAP, 0x01);
reg_w(ov, R51x_SYS_SNAP, 0x00);
reg_w(ov, R51x_SYS_SNAP, 0x02);
reg_w(ov, R51x_SYS_SNAP, 0x00);
} else if (ov->bclass == BCL_OV518) {
warn("snapshot reset not supported yet on OV518(+)");
} else {
......@@ -1383,7 +1394,7 @@ init_ov_sensor(struct usb_ov511 *ov)
if (i2c_w(ov, 0x12, 0x80) < 0) return -EIO;
/* Wait for it to initialize */
schedule_timeout (1 + 150 * HZ / 1000);
schedule_timeout(1 + 150 * HZ / 1000);
for (i = 0, success = 0; i < i2c_detect_tries && !success; i++) {
if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) &&
......@@ -2018,10 +2029,6 @@ sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p)
p->whiteness = 105 << 8;
/* Can we get these from frame[0]? -claudio? */
p->depth = ov->frame[0].depth;
p->palette = ov->frame[0].format;
return 0;
}
......@@ -2424,9 +2431,10 @@ mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height,
#endif
break;
case SEN_OV6620:
case SEN_OV6630:
i2c_w(ov, 0x14, qvga?0x24:0x04);
/* No special settings yet */
break;
case SEN_OV6630:
i2c_w(ov, 0x14, qvga?0xa4:0x84);
break;
default:
err("Invalid sensor");
......@@ -2504,19 +2512,11 @@ mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height,
if (framedrop >= 0)
i2c_w(ov, 0x16, framedrop);
if (sensor_gbr)
i2c_w_mask(ov, 0x12, 0x08, 0x08);
else
i2c_w_mask(ov, 0x12, 0x00, 0x08);
/* Test Pattern */
i2c_w_mask(ov, 0x12, (testpat?0x02:0x00), 0x02);
/* Auto white balance */
// if (awb)
/* Enable auto white balance */
i2c_w_mask(ov, 0x12, 0x04, 0x04);
// else
// i2c_w_mask(ov, 0x12, 0x00, 0x04);
// This will go away as soon as ov51x_mode_init_sensor_regs()
// is fully tested.
......@@ -2705,7 +2705,7 @@ ov511_mode_init_regs(struct usb_ov511 *ov,
reg_w(ov, R511_CAM_PXDIV, 0x00);
reg_w(ov, R511_CAM_LNDIV, 0x00);
/* YUV420, low pass filer on */
/* YUV420, low pass filter on */
reg_w(ov, R511_CAM_OPTS, 0x03);
/* Snapshot additions */
......@@ -4120,11 +4120,6 @@ ov51x_alloc(struct usb_ov511 *ov)
PDEBUG(4, "entered");
down(&ov->buf_lock);
if (ov->buf_state == BUF_PEND_DEALLOC) {
ov->buf_state = BUF_ALLOCATED;
del_timer(&ov->buf_timer);
}
if (ov->buf_state == BUF_ALLOCATED)
goto out;
......@@ -4394,6 +4389,10 @@ ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file,
if (sensor_get_picture(ov, p))
return -EIO;
/* Can we get these from frame[0]? -claudio? */
p->depth = ov->frame[0].depth;
p->palette = ov->frame[0].format;
return 0;
}
case VIDIOCSPICT:
......@@ -4558,7 +4557,7 @@ ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file,
depth = get_depth(vm->format);
if (!depth) {
err("VIDIOCMCAPTURE: invalid format (%s)",
PDEBUG(2, "VIDIOCMCAPTURE: invalid format (%s)",
symbolic(v4l1_plist, vm->format));
return -EINVAL;
}
......@@ -4580,7 +4579,7 @@ ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file,
}
if (force_palette && (vm->format != force_palette)) {
info("palette rejected (%s)",
PDEBUG(2, "palette rejected (%s)",
symbolic(v4l1_plist, vm->format));
return -EINVAL;
}
......@@ -4710,6 +4709,24 @@ ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file,
return 0;
}
case OV511IOC_WI2C:
{
struct ov511_i2c_struct *w = arg;
return i2c_w_slave(ov, w->slave, w->reg, w->value, w->mask);
}
case OV511IOC_RI2C:
{
struct ov511_i2c_struct *r = arg;
int rc;
rc = i2c_r_slave(ov, r->slave, r->reg);
if (rc < 0)
return rc;
r->value = rc;
return 0;
}
default:
PDEBUG(3, "Unsupported IOCtl: 0x%X", cmd);
return -ENOIOCTLCMD;
......@@ -5136,8 +5153,7 @@ ov51x_control_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
if (copy_from_user(&w, arg, sizeof(w)))
return -EFAULT;
return i2c_w_slave(ov, w.slave, w.reg, w.value,
w.mask);
return i2c_w_slave(ov, w.slave, w.reg, w.value, w.mask);
}
case OV511IOC_RI2C:
{
......@@ -5343,17 +5359,16 @@ ov7xx0_configure(struct usb_ov511 *ov)
ov->sensor = SEN_OV7610;
} else if ((rc & 3) == 1) {
/* I don't know what's different about the 76BE yet. */
if (i2c_r(ov, 0x15) & 1) {
if (i2c_r(ov, 0x15) & 1)
info("Sensor is an OV7620AE");
} else {
else
info("Sensor is an OV76BE");
}
/* OV511+ will return all zero isoc data unless we
* configure the sensor as a 7620. Someone needs to
* find the exact reg. setting that causes this. */
if (ov->bridge == BRG_OV511PLUS) {
info("Enabling 511+/76BE workaround");
info("Enabling 511+/7620AE workaround");
ov->sensor = SEN_OV7620;
} else {
ov->sensor = SEN_OV76BE;
......@@ -5745,9 +5760,9 @@ ov511_configure(struct usb_ov511 *ov)
static struct ov511_regvals aRegvalsNorm511[] = {
{ OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0x01 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x01 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x03 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x01 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x02 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
{ OV511_REG_BUS, R511_FIFO_OPTS, 0x1f },
{ OV511_REG_BUS, R511_COMP_EN, 0x00 },
{ OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 },
......@@ -5756,9 +5771,9 @@ ov511_configure(struct usb_ov511 *ov)
static struct ov511_regvals aRegvalsNorm511Plus[] = {
{ OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0xff },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x01 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x03 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x01 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x02 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
{ OV511_REG_BUS, R511_FIFO_OPTS, 0xff },
{ OV511_REG_BUS, R511_COMP_EN, 0x00 },
{ OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 },
......@@ -5970,11 +5985,20 @@ ov518_configure(struct usb_ov511 *ov)
if (ov518_init_compression(ov)) goto error;
/* OV518+ has packet numbering turned on by default */
if (ov->bridge == BRG_OV518)
ov->packet_numbering = 0;
{
struct usb_interface *ifp = &ov->dev->config[0].interface[0];
__u16 mxps = ifp->altsetting[7].endpoint[0].wMaxPacketSize;
/* Some OV518s have packet numbering by default, some don't */
if (mxps == 897)
ov->packet_numbering = 1;
else
ov->packet_numbering = 0;
} else {
/* OV518+ has packet numbering turned on by default */
ov->packet_numbering = 1;
}
ov518_set_packet_size(ov, 0);
......@@ -6126,7 +6150,8 @@ ov51x_probe(struct usb_device *dev, unsigned int ifnum,
ov->buf_state = BUF_NOT_ALLOCATED;
/* Must be kmalloc()'ed, for DMA accessibility */
/* Allocate control transfer buffer. */
/* Must be kmalloc()'ed, for DMA compatibility */
ov->cbuf = kmalloc(OV511_CBUF_SIZE, GFP_KERNEL);
if (!ov->cbuf)
goto error;
......@@ -6156,8 +6181,12 @@ ov51x_probe(struct usb_device *dev, unsigned int ifnum,
goto error;
#ifdef OV511_DEBUG
if (dump_bridge)
if (dump_bridge) {
if (ov->bclass == BCL_OV511)
ov511_dump_regs(ov);
else
ov518_dump_regs(ov);
}
#endif
memcpy(&ov->vdev, &vdev_template, sizeof(vdev_template));
......@@ -6259,6 +6288,8 @@ ov51x_disconnect(struct usb_device *dev, void *ptr)
kfree(ov);
ov = NULL;
}
PDEBUG(3, "Disconnect complete");
}
static struct usb_driver ov511_driver = {
......
drivers/usb/media/ov511.h
View file @ 8a6f3cd7
......@@ -286,21 +286,6 @@ enum {
SEN_SAA7111A,
};
// Not implemented yet
#if 0
/* Sensor classes */
enum {
SCL_UNKNOWN,
SCL_OV7610, /* 7610, 76BE, 7620AE (for now) */
SCL_OV7620,
SCL_OV6620,
SCL_OV6630, /* 6630, 6630AE, 6630AF */
SCL_OV8600,
SCL_KS0127, /* SEN_KS0127, SEN_KS0127B */
SCL_SAA7111A,
};
#endif
enum {
STATE_SCANNING, /* Scanning for start */
STATE_HEADER, /* Parsing header */
......@@ -311,7 +296,6 @@ enum {
enum {
BUF_NOT_ALLOCATED,
BUF_ALLOCATED,
BUF_PEND_DEALLOC, /* ov511->buf_timer is set */
};
/* --------- Definition of ioctl interface --------- */
......@@ -521,7 +505,6 @@ struct usb_ov511 {
int bridge; /* Type of bridge (BRG_*) */
int bclass; /* Class of bridge (BCL_*) */
int sensor; /* Type of image sensor chip (SEN_*) */
int sclass; /* Type of image sensor chip (SCL_*) */
int packet_size; /* Frame size per isoc desc */
int packet_numbering; /* Is ISO frame numbering enabled? */
......@@ -537,7 +520,6 @@ struct usb_ov511 {
/* Framebuffer/sbuf management */
int buf_state;
struct semaphore buf_lock;
struct timer_list buf_timer;
struct ov51x_decomp_ops *decomp_ops;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7