staging: unisys: visorbus: Merge controlvm completion status to controlvmchannel

The completion status are valid only for the controlvm channel
so they should be moved into its header file.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/unisys/visorbus/controlvmchannel.h

@@ -482,4 +482,80 @@ struct spar_controlvm_parameters_header {
 	u32 reserved;		/* Natural alignment */
 };
 
+/* General Errors------------------------------------------------------[0-99] */
+#define CONTROLVM_RESP_SUCCESS                                  0
+#define CONTROLVM_RESP_ERROR_ALREADY_DONE                       1
+#define CONTROLVM_RESP_ERROR_IOREMAP_FAILED                     2
+#define CONTROLVM_RESP_ERROR_KMALLOC_FAILED                     3
+#define CONTROLVM_RESP_ERROR_MESSAGE_ID_UNKNOWN                 4
+#define CONTROLVM_RESP_ERROR_MESSAGE_ID_INVALID_FOR_CLIENT      5
+
+/* CONTROLVM_INIT_CHIPSET-------------------------------------------[100-199] */
+#define CONTROLVM_RESP_ERROR_CLIENT_SWITCHCOUNT_NONZERO         100
+#define CONTROLVM_RESP_ERROR_EXPECTED_CHIPSET_INIT              101
+
+/* Maximum Limit----------------------------------------------------[200-299] */
+#define CONTROLVM_RESP_ERROR_MAX_BUSES		201	/* BUS_CREATE */
+#define CONTROLVM_RESP_ERROR_MAX_DEVICES        202	/* DEVICE_CREATE */
+/* Payload and Parameter Related------------------------------------[400-499] */
+#define CONTROLVM_RESP_ERROR_PAYLOAD_INVALID	400	/* SWITCH_ATTACHEXTPORT,
+							 * DEVICE_CONFIGURE
+							 */
+#define CONTROLVM_RESP_ERROR_INITIATOR_PARAMETER_INVALID 401	/* Multiple */
+#define CONTROLVM_RESP_ERROR_TARGET_PARAMETER_INVALID 402 /* DEVICE_CONFIGURE */
+#define CONTROLVM_RESP_ERROR_CLIENT_PARAMETER_INVALID 403 /* DEVICE_CONFIGURE */
+/* Specified[Packet Structure] Value-------------------------------[500-599] */
+#define CONTROLVM_RESP_ERROR_BUS_INVALID	500	/* SWITCH_ATTACHINTPORT,
+							 * BUS_CONFIGURE,
+							 * DEVICE_CREATE,
+							 * DEVICE_CONFIG
+							 * DEVICE_DESTROY
+							 */
+#define CONTROLVM_RESP_ERROR_DEVICE_INVALID	501 /* SWITCH_ATTACHINTPORT */
+						    /* DEVICE_CREATE,
+						     * DEVICE_CONFIGURE,
+						     * DEVICE_DESTROY
+						     */
+#define CONTROLVM_RESP_ERROR_CHANNEL_INVALID	502 /* DEVICE_CREATE,
+						     * DEVICE_CONFIGURE
+						     */
+/* Partition Driver Callback Interface----------------------[600-699] */
+#define CONTROLVM_RESP_ERROR_VIRTPCI_DRIVER_FAILURE 604	/* BUS_CREATE,
+							 * BUS_DESTROY,
+							 * DEVICE_CREATE,
+							 * DEVICE_DESTROY
+							 */
+/* Unable to invoke VIRTPCI callback */
+#define CONTROLVM_RESP_ERROR_VIRTPCI_DRIVER_CALLBACK_ERROR 605
+							/* BUS_CREATE,
+							 * BUS_DESTROY,
+							 * DEVICE_CREATE,
+							 * DEVICE_DESTROY
+							 */
+/* VIRTPCI Callback returned error */
+#define CONTROLVM_RESP_ERROR_GENERIC_DRIVER_CALLBACK_ERROR 606
+							/* SWITCH_ATTACHEXTPORT,
+							 * SWITCH_DETACHEXTPORT
+							 * DEVICE_CONFIGURE
+							 */
+
+/* generic device callback returned error */
+/* Bus Related------------------------------------------------------[700-799] */
+#define CONTROLVM_RESP_ERROR_BUS_DEVICE_ATTACHED 700	/* BUS_DESTROY */
+/* Channel Related--------------------------------------------------[800-899] */
+#define CONTROLVM_RESP_ERROR_CHANNEL_TYPE_UNKNOWN 800	/* GET_CHANNELINFO,
+							 * DEVICE_DESTROY
+							 */
+#define CONTROLVM_RESP_ERROR_CHANNEL_SIZE_TOO_SMALL 801	/* DEVICE_CREATE */
+/* Chipset Shutdown Related---------------------------------------[1000-1099] */
+#define CONTROLVM_RESP_ERROR_CHIPSET_SHUTDOWN_FAILED            1000
+#define CONTROLVM_RESP_ERROR_CHIPSET_SHUTDOWN_ALREADY_ACTIVE    1001
+
+/* Chipset Stop Related-------------------------------------------[1100-1199] */
+#define CONTROLVM_RESP_ERROR_CHIPSET_STOP_FAILED_BUS            1100
+#define CONTROLVM_RESP_ERROR_CHIPSET_STOP_FAILED_SWITCH         1101
+
+/* Device Related-------------------------------------------------[1400-1499] */
+#define CONTROLVM_RESP_ERROR_DEVICE_UDEV_TIMEOUT                1400
+
 #endif				/* __CONTROLVMCHANNEL_H__ */

drivers/staging/unisys/visorbus/controlvmcompletionstatus.h

-/* controlvmcompletionstatus.c
- *
- * Copyright (C) 2010 - 2015 UNISYS CORPORATION
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- */
-
-/*  Defines for all valid values returned in the response message header
- *  completionStatus field.  See controlvmchannel.h for description of
- *  the header: _CONTROLVM_MESSAGE_HEADER.
- */
-
-#ifndef __CONTROLVMCOMPLETIONSTATUS_H__
-#define __CONTROLVMCOMPLETIONSTATUS_H__
-
-/* General Errors------------------------------------------------------[0-99] */
-#define CONTROLVM_RESP_SUCCESS                                  0
-#define CONTROLVM_RESP_ERROR_ALREADY_DONE                       1
-#define CONTROLVM_RESP_ERROR_IOREMAP_FAILED                     2
-#define CONTROLVM_RESP_ERROR_KMALLOC_FAILED                     3
-#define CONTROLVM_RESP_ERROR_MESSAGE_ID_UNKNOWN                 4
-#define CONTROLVM_RESP_ERROR_MESSAGE_ID_INVALID_FOR_CLIENT      5
-
-/* CONTROLVM_INIT_CHIPSET-------------------------------------------[100-199] */
-#define CONTROLVM_RESP_ERROR_CLIENT_SWITCHCOUNT_NONZERO         100
-#define CONTROLVM_RESP_ERROR_EXPECTED_CHIPSET_INIT              101
-
-/* Maximum Limit----------------------------------------------------[200-299] */
-#define CONTROLVM_RESP_ERROR_MAX_BUSES		201	/* BUS_CREATE */
-#define CONTROLVM_RESP_ERROR_MAX_DEVICES        202	/* DEVICE_CREATE */
-/* Payload and Parameter Related------------------------------------[400-499] */
-#define CONTROLVM_RESP_ERROR_PAYLOAD_INVALID	400	/* SWITCH_ATTACHEXTPORT,
-							 * DEVICE_CONFIGURE
-							 */
-#define CONTROLVM_RESP_ERROR_INITIATOR_PARAMETER_INVALID 401	/* Multiple */
-#define CONTROLVM_RESP_ERROR_TARGET_PARAMETER_INVALID 402 /* DEVICE_CONFIGURE */
-#define CONTROLVM_RESP_ERROR_CLIENT_PARAMETER_INVALID 403 /* DEVICE_CONFIGURE */
-/* Specified[Packet Structure] Value-------------------------------[500-599] */
-#define CONTROLVM_RESP_ERROR_BUS_INVALID	500	/* SWITCH_ATTACHINTPORT,
-							 * BUS_CONFIGURE,
-							 * DEVICE_CREATE,
-							 * DEVICE_CONFIG
-							 * DEVICE_DESTROY
-							 */
-#define CONTROLVM_RESP_ERROR_DEVICE_INVALID	501 /* SWITCH_ATTACHINTPORT */
-						    /* DEVICE_CREATE,
-						     * DEVICE_CONFIGURE,
-						     * DEVICE_DESTROY
-						     */
-#define CONTROLVM_RESP_ERROR_CHANNEL_INVALID	502 /* DEVICE_CREATE,
-						     * DEVICE_CONFIGURE
-						     */
-/* Partition Driver Callback Interface----------------------[600-699] */
-#define CONTROLVM_RESP_ERROR_VIRTPCI_DRIVER_FAILURE 604	/* BUS_CREATE,
-							 * BUS_DESTROY,
-							 * DEVICE_CREATE,
-							 * DEVICE_DESTROY
-							 */
-/* Unable to invoke VIRTPCI callback */
-#define CONTROLVM_RESP_ERROR_VIRTPCI_DRIVER_CALLBACK_ERROR 605
-							/* BUS_CREATE,
-							 * BUS_DESTROY,
-							 * DEVICE_CREATE,
-							 * DEVICE_DESTROY
-							 */
-/* VIRTPCI Callback returned error */
-#define CONTROLVM_RESP_ERROR_GENERIC_DRIVER_CALLBACK_ERROR 606
-							/* SWITCH_ATTACHEXTPORT,
-							 * SWITCH_DETACHEXTPORT
-							 * DEVICE_CONFIGURE
-							 */
-
-/* generic device callback returned error */
-/* Bus Related------------------------------------------------------[700-799] */
-#define CONTROLVM_RESP_ERROR_BUS_DEVICE_ATTACHED 700	/* BUS_DESTROY */
-/* Channel Related--------------------------------------------------[800-899] */
-#define CONTROLVM_RESP_ERROR_CHANNEL_TYPE_UNKNOWN 800	/* GET_CHANNELINFO,
-							 * DEVICE_DESTROY
-							 */
-#define CONTROLVM_RESP_ERROR_CHANNEL_SIZE_TOO_SMALL 801	/* DEVICE_CREATE */
-/* Chipset Shutdown Related---------------------------------------[1000-1099] */
-#define CONTROLVM_RESP_ERROR_CHIPSET_SHUTDOWN_FAILED            1000
-#define CONTROLVM_RESP_ERROR_CHIPSET_SHUTDOWN_ALREADY_ACTIVE    1001
-
-/* Chipset Stop Related-------------------------------------------[1100-1199] */
-#define CONTROLVM_RESP_ERROR_CHIPSET_STOP_FAILED_BUS            1100
-#define CONTROLVM_RESP_ERROR_CHIPSET_STOP_FAILED_SWITCH         1101
-
-/* Device Related-------------------------------------------------[1400-1499] */
-#define CONTROLVM_RESP_ERROR_DEVICE_UDEV_TIMEOUT                1400
-
-#endif /* __CONTROLVMCOMPLETIONSTATUS_H__ not defined */

drivers/staging/unisys/visorbus/visorchipset.c

@@ -27,7 +27,6 @@
 
 #include "channel.h"
 #include "controlvmchannel.h"
-#include "controlvmcompletionstatus.h"
 #include "guestlinuxdebug.h"
 #include "version.h"
 #include "visorbus.h"