merge

Documentation/usb/philips.txt

@@ -189,10 +189,10 @@ trace
 The fbufs, mbufs and trace parameters are global and apply to all connected
 cameras. Each camera has its own set of buffers.
 
-size, fps, palette only specify defaults when you open() the device; this is
-to accommodate some tools that don't set the size or colour palette. You can
-change these settings after open() with the Video4Linux ioctl() calls. The
-default of defaults is QCIF size at 10 fps, BGR order.
+size and fps only specify defaults when you open() the device; this is to
+accommodate some tools that don't set the size. You can change these
+settings after open() with the Video4Linux ioctl() calls. The default of
+defaults is QCIF size at 10 fps, BGR order.
 
 The compression parameter is semiglobal; it sets the initial compression
 preference for all camera's, but this parameter can be set per camera with

drivers/usb/class/Config.help

@@ -34,6 +34,26 @@ CONFIG_USB_BLUETOOTH_TTY
   The module will be called bluetty.o. If you want to compile it as
   a module, say M here and read <file:Documentation/modules.txt>.
 
+CONFIG_USB_MIDI
+  Say Y here if you want to connect a USB MIDI device to your
+  computer's USB port. This driver is for devices that comply with
+  'Universal Serial Bus Device Class Definition for MIDI Device'.
+
+  The following devices are known to work:
+    * Steinberg USB2MIDI
+    * Roland MPU64
+    * Roland PC-300
+    * Roland SC8850
+    * Roland UM-1
+    * Roland UM-2
+    * Roland UA-100
+    * Yamaha MU1000
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usb-midi.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
 CONFIG_USB_PRINTER
   Say Y here if you want to connect a USB printer to your computer's
   USB port.

drivers/usb/class/printer.c

@@ -64,7 +64,7 @@
 #define DRIVER_DESC "USB Printer Device Class driver"
 
 #define USBLP_BUF_SIZE		8192
-#define DEVICE_ID_SIZE		1024
+#define USBLP_DEVICE_ID_SIZE	1024
 
 /* ioctls: */
 #define LPGETSTATUS		0x060b		/* same as in drivers/char/lp.c */
@@ -839,7 +839,7 @@ static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
 	/* Malloc device ID string buffer to the largest expected length,
 	 * since we can re-query it on an ioctl and a dynamic string
 	 * could change in length. */
-	if (!(usblp->device_id_string = kmalloc(DEVICE_ID_SIZE, GFP_KERNEL))) {
+	if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
 		err("out of memory for device_id_string");
 		goto abort_minor;
 	}
@@ -1045,7 +1045,7 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
 {
 	int err, length;
 
-	err = usblp_get_id(usblp, 0, usblp->device_id_string, DEVICE_ID_SIZE - 1);
+	err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
 	if (err < 0) {
 		dbg("usblp%d: error = %d reading IEEE-1284 Device ID string",
 			usblp->minor, err);
@@ -1059,8 +1059,8 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
 	length = (usblp->device_id_string[0] << 8) + usblp->device_id_string[1];
 	if (length < 2)
 		length = 2;
-	else if (length >= DEVICE_ID_SIZE)
-		length = DEVICE_ID_SIZE - 1;
+	else if (length >= USBLP_DEVICE_ID_SIZE)
+		length = USBLP_DEVICE_ID_SIZE - 1;
 	usblp->device_id_string[length] = '\0';
 
 	dbg("usblp%d Device ID string [len=%d]=\"%s\"",

drivers/usb/core/devices.c

@@ -574,8 +574,10 @@ static ssize_t usb_device_read(struct file *file, char *buf, size_t nbytes, loff
 		bus = list_entry(buslist, struct usb_bus, bus_list);
 		/* recurse through all children of the root hub */
 		ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, bus->root_hub, bus, 0, 0, 0);
-		if (ret < 0)
+		if (ret < 0) {
+			up(&usb_bus_list_lock);
 			return ret;
+		}
 		total_written += ret;
 	}
 	up (&usb_bus_list_lock);

drivers/usb/core/hcd-pci.c

@@ -20,6 +20,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/irq.h>
 
 #ifdef CONFIG_USB_DEBUG
 	#define DEBUG

drivers/usb/host/ohci-hcd.c

@@ -100,7 +100,7 @@
  *	- lots more testing!!
  */
 
-#define DRIVER_VERSION "2002-Jun-01"
+#define DRIVER_VERSION "2002-Jun-10"
 #define DRIVER_AUTHOR "Roman Weissgaerber <weissg@vienna.at>, David Brownell"
 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
 
@@ -307,7 +307,6 @@ ohci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 	spin_lock_irqsave (&ohci->lock, flags);
 	for (i = 0; i < 32; i++) {
 		struct ed	*ed = dev->ep [i];
-		struct td	*tdTailP;
 
 		if (!ed)
 			continue;
@@ -319,10 +318,7 @@ ohci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 		case ED_NEW:
 			break;
 		case ED_UNLINK:
-			tdTailP = dma_to_td (ohci,
-				le32_to_cpup (&ed->hwTailP) & 0xfffffff0);
-			td_free (ohci, tdTailP); /* free dummy td */
-			hash_free_ed (ohci, ed);
+			td_free (ohci, ed->dummy);
 			break;
 
 		case ED_OPER:

drivers/usb/host/ohci-q.c

@@ -440,14 +440,16 @@ static struct ed *ep_add_ed (
 			spin_unlock_irqrestore (&ohci->lock, flags);
 			return NULL;
 		}
+		ed->dummy = td;
 		ed->hwTailP = cpu_to_le32 (td->td_dma);
-		ed->hwHeadP = ed->hwTailP;	
+		ed->hwHeadP = ed->hwTailP;	/* ED_C, ED_H zeroed */
 		ed->state = ED_UNLINK;
 		ed->type = usb_pipetype (pipe);
 	}
 
-// FIXME:  don't do this if it's linked to the HC,
-// we might clobber data toggle or other state ...
+// FIXME:  don't do this if it's linked to the HC, or without knowing it's
+// safe to clobber state/mode info tied to (previous) config/altsetting.
+// (but dev0/ep0, used by set_address, must get clobbered)
 
 	ed->hwINFO = cpu_to_le32 (usb_pipedevice (pipe)
 			| usb_pipeendpoint (pipe) << 7
@@ -523,27 +525,31 @@ td_fill (struct ohci_hcd *ohci, unsigned int info,
 	dma_addr_t data, int len,
 	struct urb *urb, int index)
 {
-	volatile struct td	*td, *td_pt;
+	struct td		*td, *td_pt;
 	urb_priv_t		*urb_priv = urb->hcpriv;
+	int			is_iso = info & TD_ISO;
 
 	if (index >= urb_priv->length) {
 		err ("internal OHCI error: TD index > length");
 		return;
 	}
 
-#if 0
-	/* no interrupt needed except for URB's last TD */
+	/* aim for only one interrupt per urb.  mostly applies to control
+	 * and iso; other urbs rarely need more than one TD per urb.
+	 *
+	 * NOTE: could delay interrupts even for the last TD, and get fewer
+	 * interrupts ... increasing per-urb latency by sharing interrupts.
+	 */
 	if (index != (urb_priv->length - 1))
-		info |= TD_DI;
-#endif
+		info |= is_iso ? TD_DI_SET (7) : TD_DI_SET (1);
 
 	/* use this td as the next dummy */
 	td_pt = urb_priv->td [index];
 	td_pt->hwNextTD = 0;
 
 	/* fill the old dummy TD */
-	td = urb_priv->td [index] = dma_to_td (ohci,
-			le32_to_cpup (&urb_priv->ed->hwTailP));
+	td = urb_priv->td [index] = urb_priv->ed->dummy;
+	urb_priv->ed->dummy = td_pt;
 
 	td->ed = urb_priv->ed;
 	td->next_dl_td = NULL;
@@ -554,7 +560,7 @@ td_fill (struct ohci_hcd *ohci, unsigned int info,
 		data = 0;
 
 	td->hwINFO = cpu_to_le32 (info);
-	if ((td->ed->type) == PIPE_ISOCHRONOUS) {
+	if (is_iso) {
 		td->hwCBP = cpu_to_le32 (data & 0xFFFFF000);
 		td->ed->intriso.last_iso = info & 0xffff;
 	} else {
@@ -901,6 +907,7 @@ static void finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 		 *     [a2] some (earlier) URBs still linked, re-enable
 		 * (b) finishing ED unlink
 		 *     [b1] no URBs queued, ED is truly idle now
+		 *          ... we could set state ED_NEW and free dummy
 		 *     [b2] URBs now queued, link ED back into schedule
 		 * right now we only have (a)
 		 */
@@ -910,9 +917,6 @@ static void finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 		if (tdHeadP == tdTailP) {
 			if (ed->state == ED_OPER)
 				start_ed_unlink (ohci, ed);
-			td_free (ohci, tdTailP);
-			ed->hwINFO = ED_SKIP;
-			ed->state = ED_NEW;
 		} else
 			ed->hwINFO &= ~ED_SKIP;
 

drivers/usb/host/ohci.h

@@ -29,6 +29,7 @@ struct ed {
 	/* rest are purely for the driver's use */
 	dma_addr_t		dma;		/* addr of ED */
 	struct ed		*ed_prev;	/* for non-interrupt EDs */
+	struct td		*dummy;
 
 	u8			type; 		/* PIPE_{BULK,...} */
 	u8			interval;	/* interrupt, isochronous */
@@ -63,24 +64,33 @@ struct ed {
 struct td {
 	/* first fields are hardware-specified, le32 */
 	__u32		hwINFO;		/* transfer info bitmask */
+
+	/* hwINFO bits for both general and iso tds: */
 #define TD_CC       0xf0000000			/* condition code */
 #define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
 //#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_DI       0x00E00000			/* frames before interrupt */
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+	/* these two bits are available for definition/use by HCDs in both
+	 * general and iso tds ... others are available for only one type
+	 */
+//#define TD____	    0x00020000
+#define TD_ISO	    0x00010000			/* copy of ED_ISO */
+
+	/* hwINFO bits for general tds: */
 #define TD_EC       0x0C000000			/* error count */
 #define TD_T        0x03000000			/* data toggle state */
 #define TD_T_DATA0  0x02000000				/* DATA0 */
 #define TD_T_DATA1  0x03000000				/* DATA1 */
 #define TD_T_TOGGLE 0x00000000				/* uses ED_C */
-#define TD_DI       0x00E00000			/* frames before interrupt */
-//#define TD_DI_SET(X) (((X) & 0x07)<< 21)
 #define TD_DP       0x00180000			/* direction/pid */
 #define TD_DP_SETUP 0x00000000			/* SETUP pid */
 #define TD_DP_IN    0x00100000				/* IN pid */
 #define TD_DP_OUT   0x00080000				/* OUT pid */
 							/* 0x00180000 rsvd */
 #define TD_R        0x00040000			/* round: short packets OK? */
-					/* bits 0x1ffff are defined by HCD */
-#define TD_ISO	    0x00010000			/* copy of ED_ISO */
+
+	/* (no hwINFO #defines yet for iso tds) */
 
   	__u32		hwCBP;		/* Current Buffer Pointer (or 0) */
   	__u32		hwNextTD;	/* Next TD Pointer */

drivers/usb/image/hpusbscsi.c

@@ -273,8 +273,6 @@ static int hpusbscsi_scsi_queuecommand (Scsi_Cmnd *srb, scsi_callback callback)
 	usb_urb_callback usb_callback;
 	int res;
 
-	hpusbscsi->use_count++;
-
 	/* we don't answer for anything but our single device on any faked host controller */
 	if ( srb->device->lun || srb->device->id || srb->device->channel ) {
 		if (callback) {
@@ -341,7 +339,6 @@ static int hpusbscsi_scsi_queuecommand (Scsi_Cmnd *srb, scsi_callback callback)
 	}
 
 out:
-	hpusbscsi->use_count--;
 	return 0;
 }
 

drivers/usb/image/hpusbscsi.h

@@ -20,25 +20,25 @@ struct hpusbscsi
         int ep_in;
         int ep_int;
         int interrupt_interval;
-
+	int number;
+	int fragment;
         struct Scsi_Host *host;
-        Scsi_Host_Template ctempl;
-        int number;
+
 	scsi_callback scallback;
 	Scsi_Cmnd *srb;
-	u8 sense_command[SENSE_COMMAND_SIZE];
 
-        int use_count;
+
         wait_queue_head_t pending;
         wait_queue_head_t deathrow;
 
         struct urb *dataurb;
         struct urb *controlurb;
-        int fragment;
+
 
         int state;
         int current_data_pipe;
-
+	Scsi_Host_Template ctempl;
+	u8 sense_command[SENSE_COMMAND_SIZE];
         u8 scsi_state_byte;
 };
 

drivers/usb/media/dabusb.c

@@ -609,6 +609,7 @@ static int dabusb_open (struct inode *inode, struct file *file)
 		down (&s->mutex);
 	}
 	if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) {
+		up(&s->mutex);
 		err("set_interface failed");
 		return -EINVAL;
 	}

drivers/usb/media/pwc-ctrl.c

 /* Driver for Philips webcam
    Functions that send various control messages to the webcam, including
    video modes.
-   (C) 1999-2001 Nemosoft Unv. (webcam@smcc.demon.nl)
+   (C) 1999-2002 Nemosoft Unv. (webcam@smcc.demon.nl)
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -78,10 +78,12 @@
 #define READ_SHUTTER_FORMATTER			0x0600
 #define READ_RED_GAIN_FORMATTER			0x0700
 #define READ_BLUE_GAIN_FORMATTER		0x0800
+#define SENSOR_TYPE_FORMATTER1			0x0C00
 #define READ_RAW_Y_MEAN_FORMATTER		0x3100
 #define SET_POWER_SAVE_MODE_FORMATTER		0x3200
 #define MIRROR_IMAGE_FORMATTER			0x3300
 #define LED_FORMATTER				0x3400
+#define SENSOR_TYPE_FORMATTER2			0x3700
 
 /* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */
 #define VIDEO_OUTPUT_CONTROL_FORMATTER		0x0100
@@ -162,6 +164,21 @@ static struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4] =
 /****************************************************************************/
 
 
+#define SendControlMsg(request, value, buflen) \
+	usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
+		request, \
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
+		value, \
+		pdev->vcinterface, \
+		&buf, buflen, HZ / 2)
+
+#define RecvControlMsg(request, value, buflen) \
+	usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
+		request, \
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
+		value, \
+		pdev->vcinterface, \
+		&buf, buflen, HZ / 2)
 
 
 #if PWC_DEBUG
@@ -241,7 +258,7 @@ static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int fra
 	ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
 	if (ret < 0)
 		return ret;
-	if (pEntry->compressed)
+	if (pEntry->compressed && pdev->decompressor != NULL)
 		pdev->decompressor->init(pdev->release, buf, pdev->decompress_data);
 		
 	/* Set various parameters */
@@ -911,7 +928,7 @@ static inline int pwc_get_red_gain(struct pwc_device *pdev)
 	int ret;
 	
 	ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
- 	        GET_STATUS_CTL, 
+ 	        GET_CHROM_CTL, 
 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	        PRESET_MANUAL_RED_GAIN_FORMATTER,
 		pdev->vcinterface,
@@ -950,7 +967,7 @@ static inline int pwc_get_blue_gain(struct pwc_device *pdev)
 	int ret;
 	
 	ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
-   	        GET_STATUS_CTL,
+   	        GET_CHROM_CTL,
 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		PRESET_MANUAL_BLUE_GAIN_FORMATTER,
 		pdev->vcinterface,
@@ -962,6 +979,7 @@ static inline int pwc_get_blue_gain(struct pwc_device *pdev)
 	return (buf << 8);
 }
 
+
 /* The following two functions are different, since they only read the
    internal red/blue gains, which may be different from the manual 
    gains set or read above.
@@ -979,7 +997,7 @@ static inline int pwc_read_red_gain(struct pwc_device *pdev)
 		&buf, 1, HZ / 2);
 
 	if (ret < 0)
-	    return ret;
+		return ret;
 	
 	return (buf << 8);
 }
@@ -997,11 +1015,74 @@ static inline int pwc_read_blue_gain(struct pwc_device *pdev)
 		&buf, 1, HZ / 2);
 
 	if (ret < 0)
-	    return ret;
+		return ret;
 	
 	return (buf << 8);
 }
 
+
+static inline int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
+{
+	unsigned char buf;
+	
+	/* useful range is 0x01..0x20 */
+	buf = speed / 0x7f0;
+	return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+		SET_CHROM_CTL,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		AWB_CONTROL_SPEED_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+}
+
+static inline int pwc_get_wb_speed(struct pwc_device *pdev)
+{
+	unsigned char buf;
+	int ret;
+	
+	ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+		GET_CHROM_CTL,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		AWB_CONTROL_SPEED_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+	if (ret < 0)
+		return ret;
+	return (buf * 0x7f0);
+}
+
+
+static inline int pwc_set_wb_delay(struct pwc_device *pdev, int delay)
+{
+	unsigned char buf;
+	
+	/* useful range is 0x01..0x3F */
+	buf = (delay >> 10);
+	return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+		SET_CHROM_CTL,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		AWB_CONTROL_DELAY_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+}
+
+static inline int pwc_get_wb_delay(struct pwc_device *pdev)
+{
+	unsigned char buf;
+	int ret;
+	
+	ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+		GET_CHROM_CTL,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		AWB_CONTROL_DELAY_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+	if (ret < 0)
+		return ret;
+	return (buf << 10);
+}
+
+
 int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
 {
 	unsigned char buf[2];
@@ -1055,61 +1136,248 @@ int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
 	return 0;
 }
 
+static inline int pwc_set_contour(struct pwc_device *pdev, int contour)
+{
+	unsigned char buf;
+	int ret;
+	
+	if (contour < 0)
+		buf = 0xff; /* auto contour on */
+	else
+		buf = 0x0; /* auto contour off */
+	ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+		SET_LUM_CTL,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		AUTO_CONTOUR_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+	if (ret < 0)
+		return ret;
+	
+	if (contour < 0)
+		return 0;
+	if (contour > 0xffff)
+		contour = 0xffff;
+	
+	buf = (contour >> 10); /* contour preset is [0..3f] */
+	ret = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+		SET_LUM_CTL,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		PRESET_CONTOUR_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+	if (ret < 0)	
+		return ret;	
+	return 0;
+}
+
+static inline int pwc_get_contour(struct pwc_device *pdev, int *contour)
+{
+	unsigned char buf;
+	int ret;
+	
+	ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+		GET_LUM_CTL,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		AUTO_CONTOUR_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+	if (ret < 0)
+		return ret;
+
+	if (buf == 0) {
+		/* auto mode off, query current preset value */
+		ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+			GET_LUM_CTL,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			PRESET_CONTOUR_FORMATTER,
+			pdev->vcinterface,
+			&buf, 1, HZ / 2);
+		if (ret < 0)	
+			return ret;
+		*contour =  (buf << 10);
+	}
+	else
+		*contour = -1;
+	return 0;
+}
+
+
+static inline int pwc_set_backlight(struct pwc_device *pdev, int backlight)
+{
+	unsigned char buf;
+	
+	if (backlight)
+		buf = 0xff;
+	else
+		buf = 0x0;
+	return usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+		SET_LUM_CTL,
+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		BACK_LIGHT_COMPENSATION_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+}
+
+static inline int pwc_get_backlight(struct pwc_device *pdev)
+{
+	int ret;
+	unsigned char buf;
+	
+	ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+		GET_LUM_CTL,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		BACK_LIGHT_COMPENSATION_FORMATTER,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+	if (ret < 0)
+		return ret;
+	return buf;
+}
+
+
+static inline int pwc_set_flicker(struct pwc_device *pdev, int flicker)
+{
+	unsigned char buf;
+	
+	if (flicker)
+		buf = 0xff;
+	else
+		buf = 0x0;
+	return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+}
+
+static inline int pwc_get_flicker(struct pwc_device *pdev)
+{
+	int ret;
+	unsigned char buf;
+	
+	ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+	return buf;
+}
+
+
+static inline int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise)
+{
+	unsigned char buf;
+
+	if (noise < 0)
+		noise = 0;
+	if (noise > 3)
+		noise = 3;
+	buf = noise;
+	return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+}
+
+static inline int pwc_get_dynamic_noise(struct pwc_device *pdev)
+{
+	int ret;
+	unsigned char buf;
+	
+	ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+	if (ret < 0)
+		return ret;
+//Debug("pwc_get_dynamic_noise = %d\n", buf);
+	return buf;
+}
+
+
+int pwc_get_cmos_sensor(struct pwc_device *pdev)
+{
+	unsigned char buf;
+	int ret = -1, request;
+	
+	if (pdev->type < 675)
+		request = SENSOR_TYPE_FORMATTER1;
+	else if (pdev->type < 730)
+		return -1; /* The Vesta series doesn't have this call */
+	else
+		request = SENSOR_TYPE_FORMATTER2;
+	
+	ret = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+		GET_STATUS_CTL,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		request,
+		pdev->vcinterface,
+		&buf, 1, HZ / 2);
+	if (ret < 0)
+		return ret;
+	if (pdev->type < 675)
+		return buf | 0x100;
+	else
+		return buf;
+}
+
+
  /* End of Add-Ons                                    */
  /* ************************************************* */
 
 int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 {
+	int ret = 0;
+
 	switch(cmd) {
 	case VIDIOCPWCRUSER:
 	{
 		if (pwc_restore_user(pdev))
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	}
 	
 	case VIDIOCPWCSUSER:
 	{
 		if (pwc_save_user(pdev))
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	}
 		
 	case VIDIOCPWCFACTORY:
 	{
 		if (pwc_restore_factory(pdev))
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	}
 	
 	case VIDIOCPWCSCQUAL:
 	{	
 		int *qual = arg;
-		int ret;
 
 		if (*qual < 0 || *qual > 3)
-			return -EINVAL;
-		ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot);
-		if (ret < 0)
-			return ret;
-		pdev->vcompression = *qual;
+			ret = -EINVAL;
+		else
+			ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot);
+		if (ret >= 0)
+			pdev->vcompression = *qual;
 		break;
 	}
 	
 	case VIDIOCPWCGCQUAL:
 	{
 		int *qual = arg;
-
+		
 		*qual = pdev->vcompression;
 		break;
 	}
 
+	case VIDIOCPWCPROBE:
+	{
+		struct pwc_probe probe;
+		
+		strcpy(probe.name, pdev->vdev->name);
+		probe.type = pdev->type;
+		if (copy_to_user(arg, &probe, sizeof(probe)))
+			ret = -EFAULT;
+		break;
+	}
+
 	case VIDIOCPWCSAGC:
 	{
 		int *agc = arg;
-		
+
 		if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc))
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	}
 	
@@ -1118,29 +1386,21 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 		int *agc = arg;
 		
 		if (pwc_get_agc(pdev, agc))
-			return -EINVAL;
+			ret = -EINVAL;
 		break;
 	}
 	
 	case VIDIOCPWCSSHUTTER:
 	{
 		int *shutter_speed = arg;
-		int ret;
 
 		ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed);
-		if (ret < 0)
-			return ret;
 		break;
 	}
 	
-
- /* ************************************************* */
- /* Begin of Add-Ons for color compensation           */
-
         case VIDIOCPWCSAWB:
 	{
 		struct pwc_whitebalance *wb = arg;
-		int ret;
 		
 		ret = pwc_set_awb(pdev, wb->mode);
 		if (ret >= 0 && wb->mode == PWC_WB_MANUAL) {
@@ -1153,52 +1413,149 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCGAWB:
 	{
 		struct pwc_whitebalance *wb = arg;
-		
+
 		memset(wb, 0, sizeof(*wb));
 		wb->mode = pwc_get_awb(pdev);
 		if (wb->mode < 0)
-			return -EINVAL;
-		wb->manual_red = pwc_get_red_gain(pdev);
-		wb->manual_blue = pwc_get_blue_gain(pdev);
-		if (wb->mode == PWC_WB_AUTO) {
-			wb->read_red = pwc_read_red_gain(pdev);
-			wb->read_blue = pwc_read_blue_gain(pdev);
+			ret = -EINVAL;
+		else {
+			if (wb->mode == PWC_WB_MANUAL) {
+				wb->manual_red = pwc_get_red_gain(pdev);
+				wb->manual_blue = pwc_get_blue_gain(pdev);
+			}
+			if (wb->mode == PWC_WB_AUTO) {
+				wb->read_red = pwc_read_red_gain(pdev);
+				wb->read_blue = pwc_read_blue_gain(pdev);
+			}
 		}
 		break;
 	}
+	
+	case VIDIOCPWCSAWBSPEED:
+	{
+		struct pwc_wb_speed *wbs = arg;
+		
+		if (wbs->control_speed > 0) {
+			ret = pwc_set_wb_speed(pdev, wbs->control_speed);
+		}
+		if (wbs->control_delay > 0) {
+			ret = pwc_set_wb_delay(pdev, wbs->control_delay);
+		}
+		break;
+	}
+	
+	case VIDIOCPWCGAWBSPEED:
+	{
+		struct pwc_wb_speed *wbs = arg;
+		
+		ret = pwc_get_wb_speed(pdev);
+		if (ret < 0)
+			break;
+		wbs->control_speed = ret;
+		ret = pwc_get_wb_delay(pdev);
+		if (ret < 0)
+			break;
+		wbs->control_delay = ret;
+		break;
+	}
 
         case VIDIOCPWCSLED:
 	{
-		int ret;
 		struct pwc_leds *leds = arg;
 
 		ret = pwc_set_leds(pdev, leds->led_on, leds->led_off);
-		if (ret<0)
-		    return ret;
-	    break;
+	    	break;
 	}
 
 
-
 	case VIDIOCPWCGLED:
 	{
-		int led;
 		struct pwc_leds *leds = arg;
 		
-		led = pwc_get_leds(pdev, &leds->led_on, &leds->led_off); 
-		if (led < 0)
-			return -EINVAL;
+		ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off); 
 		break;
 	}
 
- /* End of Add-Ons                                    */
- /* ************************************************* */
+	case VIDIOCPWCSCONTOUR:
+	{
+		int *contour = arg;
+
+		ret = pwc_set_contour(pdev, *contour);
+		break;
+	}
+			
+	case VIDIOCPWCGCONTOUR:
+	{
+		int *contour = arg;
+		
+		ret = pwc_get_contour(pdev, contour);
+		break;
+	}
+	
+	case VIDIOCPWCSBACKLIGHT:
+	{
+		int *backlight = arg;
+		
+		ret = pwc_set_backlight(pdev, *backlight);
+		break;
+	}
+
+	case VIDIOCPWCGBACKLIGHT:
+	{
+		int *backlight = arg;
+		
+		ret = pwc_get_backlight(pdev);
+		if (ret >= 0)
+			*backlight = ret;
+		break;
+	}
+	
+	case VIDIOCPWCSFLICKER:
+	{
+		int *flicker = arg;
+		
+		ret = pwc_set_flicker(pdev, *flicker);
+		break;
+	}
+
+	case VIDIOCPWCGFLICKER:
+	{
+		int *flicker = arg;
+		
+		ret = pwc_get_flicker(pdev);
+		if (ret >= 0)
+			*flicker = ret;
+		break;
+	}
+	
+	case VIDIOCPWCSDYNNOISE:
+	{
+		int *dynnoise = arg;
+		
+		ret = pwc_set_dynamic_noise(pdev, *dynnoise);
+		break;
+	}
+	
+	case VIDIOCPWCGDYNNOISE:
+	{
+		int *dynnoise = arg;
+
+		ret = pwc_get_dynamic_noise(pdev);
+		if (ret < 0)
+			break;
+		*dynnoise = ret;
+		break;
+	}
+	
 
 	default:
-		return -ENOIOCTLCMD;
+		ret = -ENOIOCTLCMD;
 		break;
 	}
-	return 0;
+	
+	if (ret > 0)
+		return 0;
+	return ret;
 }
 
 

drivers/usb/media/pwc-ioctl.h

 #ifndef PWC_IOCTL_H
 #define PWC_IOCTL_H
 
-/* (C) 2001 Nemosoft Unv.    webcam@smcc.demon.nl
+/* (C) 2001-2002 Nemosoft Unv.    webcam@smcc.demon.nl
    
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -18,7 +18,9 @@
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-/*
+/*         This is pwc-ioctl.h belonging to PWC 8.7                        */
+
+/* 
    Changes
    2001/08/03  Alvarado   Added ioctl constants to access methods for 
                           changing white balance and red/blue gains
@@ -52,6 +54,14 @@
 #define PWC_FPS_SNAPSHOT	0x00400000
 
 
+
+struct pwc_probe
+{
+	char name[32];
+	int type;
+};
+
+
 /* pwc_whitebalance.mode values */
 #define PWC_WB_INDOOR		0
 #define PWC_WB_OUTDOOR		1
@@ -63,9 +73,9 @@
    Set mode to one of the PWC_WB_* values above.
    *red and *blue are the respective gains of these colour components inside 
    the camera; range 0..65535
-   When mode == PWC_WB_MANUAL, manual_red and manual_blue are set or read; 
+   When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; 
    otherwise undefined.
-   read_red and read_blue are read-only.
+   'read_red' and 'read_blue' are read-only.
 */   
    
 struct pwc_whitebalance
@@ -75,6 +85,17 @@ struct pwc_whitebalance
 	int read_red, read_blue;	/* R/O */
 };
 
+/* 
+   'control_speed' and 'control_delay' are used in automatic whitebalance mode,
+   and tell the camera how fast it should react to changes in lighting, and 
+   with how much delay. Valid values are 0..65535.
+*/
+struct pwc_wb_speed
+{
+	int control_speed;
+	int control_delay;
+
+};
 
 /* Used with VIDIOCPWC[SG]LED */
 struct pwc_leds
@@ -104,6 +125,19 @@ struct pwc_leds
  /* Get preferred compression quality */
 #define VIDIOCPWCGCQUAL		_IOR('v', 195, int)
 
+
+ /* This is a probe function; since so many devices are supported, it
+    becomes difficult to include all the names in programs that want to
+    check for the enhanced Philips stuff. So in stead, try this PROBE;
+    it returns a structure with the original name, and the corresponding 
+    Philips type.
+    To use, fill the structure with zeroes, call PROBE and if that succeeds,
+    compare the name with that returned from VIDIOCGCAP; they should be the
+    same. If so, you can be assured it is a Philips (OEM) cam and the type
+    is valid.
+ */    
+#define VIDIOCPWCPROBE		_IOR('v', 199, struct pwc_probe)
+
  /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */
 #define VIDIOCPWCSAGC		_IOW('v', 200, int)
  /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */
@@ -115,9 +149,28 @@ struct pwc_leds
 #define VIDIOCPWCSAWB           _IOW('v', 202, struct pwc_whitebalance)
 #define VIDIOCPWCGAWB           _IOR('v', 202, struct pwc_whitebalance)
 
- /* Turn LED on/off ; int range 0..65535 */
+ /* Auto WB speed */
+#define VIDIOCPWCSAWBSPEED	_IOW('v', 203, struct pwc_wb_speed)
+#define VIDIOCPWCGAWBSPEED	_IOR('v', 203, struct pwc_wb_speed)
+
+ /* LEDs on/off/blink; int range 0..65535 */
 #define VIDIOCPWCSLED           _IOW('v', 205, struct pwc_leds)
- /* Get state of LED; int range 0..65535 */
 #define VIDIOCPWCGLED           _IOR('v', 205, struct pwc_leds)
 
+  /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */
+#define VIDIOCPWCSCONTOUR	_IOW('v', 206, int)
+#define VIDIOCPWCGCONTOUR	_IOR('v', 206, int)
+
+  /* Backlight compensation; 0 = off, otherwise on */
+#define VIDIOCPWCSBACKLIGHT	_IOW('v', 207, int)
+#define VIDIOCPWCGBACKLIGHT	_IOR('v', 207, int)
+
+  /* Flickerless mode; = 0 off, otherwise on */
+#define VIDIOCPWCSFLICKER	_IOW('v', 208, int)
+#define VIDIOCPWCGFLICKER	_IOR('v', 208, int)  
+
+  /* Dynamic noise reduction; 0 off, 3 = high noise reduction */
+#define VIDIOCPWCSDYNNOISE	_IOW('v', 209, int)
+#define VIDIOCPWCGDYNNOISE	_IOR('v', 209, int)
+
 #endif

drivers/usb/media/pwc.h

-/* (C) 1999-2001 Nemosoft Unv. (webcam@smcc.demon.nl)
+/* (C) 1999-2002 Nemosoft Unv. (webcam@smcc.demon.nl)
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -60,8 +60,8 @@
 
 /* Version block */
 #define PWC_MAJOR	8
-#define PWC_MINOR	5
-#define PWC_VERSION 	"8.5"
+#define PWC_MINOR	7
+#define PWC_VERSION 	"8.7"
 #define PWC_NAME 	"pwc"
 
 /* Turn certain features on/off */
@@ -247,6 +247,7 @@ extern int pwc_get_saturation(struct pwc_device *pdev);
 extern int pwc_set_saturation(struct pwc_device *pdev, int value);
 extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
 extern int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value);
+extern int pwc_get_cmos_sensor(struct pwc_device *pdev);
 
 /* Power down or up the camera; not supported by all models */
 extern int pwc_camera_power(struct pwc_device *pdev, int power);

drivers/usb/media/se401.c

@@ -1330,7 +1330,13 @@ static int se401_init(struct usb_se401 *se401)
 
 	se401->sizes=cp[4]+cp[5]*256;
 	se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	if (!se401->width)
+		return 1;
 	se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	if (!se401->height) {
+		kfree(se401->width);
+		return 1;
+	}
 	for (i=0; i<se401->sizes; i++) {
 		    se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256;
 		    se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256;

drivers/usb/net/cdc-ether.c

@@ -426,6 +426,7 @@ static void CDC_SetEthernetPacketFilter (ether_dev_t *ether_dev)
 }
 #endif
 
+
 static void CDCEther_set_multicast( struct net_device *net )
 {
 	ether_dev_t *ether_dev = net->priv;