merge

Documentation/usb/philips.txt

@@ -189,10 +189,10 @@ trace
 The fbufs, mbufs and trace parameters are global and apply to all connected
 cameras. Each camera has its own set of buffers.
 
-size, fps, palette only specify defaults when you open() the device; this is
-to accommodate some tools that don't set the size or colour palette. You can
-change these settings after open() with the Video4Linux ioctl() calls. The
-default of defaults is QCIF size at 10 fps, BGR order.
+size and fps only specify defaults when you open() the device; this is to
+accommodate some tools that don't set the size. You can change these
+settings after open() with the Video4Linux ioctl() calls. The default of
+defaults is QCIF size at 10 fps, BGR order.
 
 The compression parameter is semiglobal; it sets the initial compression
 preference for all camera's, but this parameter can be set per camera with

drivers/usb/class/Config.help

@@ -34,6 +34,26 @@ CONFIG_USB_BLUETOOTH_TTY
   The module will be called bluetty.o. If you want to compile it as
   a module, say M here and read <file:Documentation/modules.txt>.
 
+CONFIG_USB_MIDI
+  Say Y here if you want to connect a USB MIDI device to your
+  computer's USB port. This driver is for devices that comply with
+  'Universal Serial Bus Device Class Definition for MIDI Device'.
+
+  The following devices are known to work:
+    * Steinberg USB2MIDI
+    * Roland MPU64
+    * Roland PC-300
+    * Roland SC8850
+    * Roland UM-1
+    * Roland UM-2
+    * Roland UA-100
+    * Yamaha MU1000
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usb-midi.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
 CONFIG_USB_PRINTER
   Say Y here if you want to connect a USB printer to your computer's
   USB port.

drivers/usb/class/printer.c

@@ -64,7 +64,7 @@
 #define DRIVER_DESC "USB Printer Device Class driver"
 
 #define USBLP_BUF_SIZE		8192
-#define DEVICE_ID_SIZE		1024
+#define USBLP_DEVICE_ID_SIZE	1024
 
 /* ioctls: */
 #define LPGETSTATUS		0x060b		/* same as in drivers/char/lp.c */
@@ -839,7 +839,7 @@ static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
 	/* Malloc device ID string buffer to the largest expected length,
 	 * since we can re-query it on an ioctl and a dynamic string
 	 * could change in length. */
-	if (!(usblp->device_id_string = kmalloc(DEVICE_ID_SIZE, GFP_KERNEL))) {
+	if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
 		err("out of memory for device_id_string");
 		goto abort_minor;
 	}
@@ -1045,7 +1045,7 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
 {
 	int err, length;
 
-	err = usblp_get_id(usblp, 0, usblp->device_id_string, DEVICE_ID_SIZE - 1);
+	err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
 	if (err < 0) {
 		dbg("usblp%d: error = %d reading IEEE-1284 Device ID string",
 			usblp->minor, err);
@@ -1059,8 +1059,8 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
 	length = (usblp->device_id_string[0] << 8) + usblp->device_id_string[1];
 	if (length < 2)
 		length = 2;
-	else if (length >= DEVICE_ID_SIZE)
-		length = DEVICE_ID_SIZE - 1;
+	else if (length >= USBLP_DEVICE_ID_SIZE)
+		length = USBLP_DEVICE_ID_SIZE - 1;
 	usblp->device_id_string[length] = '\0';
 
 	dbg("usblp%d Device ID string [len=%d]=\"%s\"",

drivers/usb/core/devices.c

@@ -574,8 +574,10 @@ static ssize_t usb_device_read(struct file *file, char *buf, size_t nbytes, loff
 		bus = list_entry(buslist, struct usb_bus, bus_list);
 		/* recurse through all children of the root hub */
 		ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, bus->root_hub, bus, 0, 0, 0);
-		if (ret < 0)
+		if (ret < 0) {
+			up(&usb_bus_list_lock);
 			return ret;
+		}
 		total_written += ret;
 	}
 	up (&usb_bus_list_lock);

drivers/usb/core/hcd-pci.c

@@ -20,6 +20,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/irq.h>
 
 #ifdef CONFIG_USB_DEBUG
 	#define DEBUG

drivers/usb/host/ohci-hcd.c

@@ -100,7 +100,7 @@
  *	- lots more testing!!
  */
 
-#define DRIVER_VERSION "2002-Jun-01"
+#define DRIVER_VERSION "2002-Jun-10"
 #define DRIVER_AUTHOR "Roman Weissgaerber <weissg@vienna.at>, David Brownell"
 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
 
@@ -307,7 +307,6 @@ ohci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 	spin_lock_irqsave (&ohci->lock, flags);
 	for (i = 0; i < 32; i++) {
 		struct ed	*ed = dev->ep [i];
-		struct td	*tdTailP;
 
 		if (!ed)
 			continue;
@@ -319,10 +318,7 @@ ohci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 		case ED_NEW:
 			break;
 		case ED_UNLINK:
-			tdTailP = dma_to_td (ohci,
-				le32_to_cpup (&ed->hwTailP) & 0xfffffff0);
-			td_free (ohci, tdTailP); /* free dummy td */
-			hash_free_ed (ohci, ed);
+			td_free (ohci, ed->dummy);
 			break;
 
 		case ED_OPER:

drivers/usb/host/ohci-q.c

@@ -440,14 +440,16 @@ static struct ed *ep_add_ed (
 			spin_unlock_irqrestore (&ohci->lock, flags);
 			return NULL;
 		}
+		ed->dummy = td;
 		ed->hwTailP = cpu_to_le32 (td->td_dma);
-		ed->hwHeadP = ed->hwTailP;	
+		ed->hwHeadP = ed->hwTailP;	/* ED_C, ED_H zeroed */
 		ed->state = ED_UNLINK;
 		ed->type = usb_pipetype (pipe);
 	}
 
-// FIXME:  don't do this if it's linked to the HC,
-// we might clobber data toggle or other state ...
+// FIXME:  don't do this if it's linked to the HC, or without knowing it's
+// safe to clobber state/mode info tied to (previous) config/altsetting.
+// (but dev0/ep0, used by set_address, must get clobbered)
 
 	ed->hwINFO = cpu_to_le32 (usb_pipedevice (pipe)
 			| usb_pipeendpoint (pipe) << 7
@@ -523,27 +525,31 @@ td_fill (struct ohci_hcd *ohci, unsigned int info,
 	dma_addr_t data, int len,
 	struct urb *urb, int index)
 {
-	volatile struct td	*td, *td_pt;
+	struct td		*td, *td_pt;
 	urb_priv_t		*urb_priv = urb->hcpriv;
+	int			is_iso = info & TD_ISO;
 
 	if (index >= urb_priv->length) {
 		err ("internal OHCI error: TD index > length");
 		return;
 	}
 
-#if 0
-	/* no interrupt needed except for URB's last TD */
+	/* aim for only one interrupt per urb.  mostly applies to control
+	 * and iso; other urbs rarely need more than one TD per urb.
+	 *
+	 * NOTE: could delay interrupts even for the last TD, and get fewer
+	 * interrupts ... increasing per-urb latency by sharing interrupts.
+	 */
 	if (index != (urb_priv->length - 1))
-		info |= TD_DI;
-#endif
+		info |= is_iso ? TD_DI_SET (7) : TD_DI_SET (1);
 
 	/* use this td as the next dummy */
 	td_pt = urb_priv->td [index];
 	td_pt->hwNextTD = 0;
 
 	/* fill the old dummy TD */
-	td = urb_priv->td [index] = dma_to_td (ohci,
-			le32_to_cpup (&urb_priv->ed->hwTailP));
+	td = urb_priv->td [index] = urb_priv->ed->dummy;
+	urb_priv->ed->dummy = td_pt;
 
 	td->ed = urb_priv->ed;
 	td->next_dl_td = NULL;
@@ -554,7 +560,7 @@ td_fill (struct ohci_hcd *ohci, unsigned int info,
 		data = 0;
 
 	td->hwINFO = cpu_to_le32 (info);
-	if ((td->ed->type) == PIPE_ISOCHRONOUS) {
+	if (is_iso) {
 		td->hwCBP = cpu_to_le32 (data & 0xFFFFF000);
 		td->ed->intriso.last_iso = info & 0xffff;
 	} else {
@@ -901,6 +907,7 @@ static void finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 		 *     [a2] some (earlier) URBs still linked, re-enable
 		 * (b) finishing ED unlink
 		 *     [b1] no URBs queued, ED is truly idle now
+		 *          ... we could set state ED_NEW and free dummy
 		 *     [b2] URBs now queued, link ED back into schedule
 		 * right now we only have (a)
 		 */
@@ -910,9 +917,6 @@ static void finish_unlinks (struct ohci_hcd *ohci, u16 tick)
 		if (tdHeadP == tdTailP) {
 			if (ed->state == ED_OPER)
 				start_ed_unlink (ohci, ed);
-			td_free (ohci, tdTailP);
-			ed->hwINFO = ED_SKIP;
-			ed->state = ED_NEW;
 		} else
 			ed->hwINFO &= ~ED_SKIP;
 

drivers/usb/host/ohci.h

@@ -29,6 +29,7 @@ struct ed {
 	/* rest are purely for the driver's use */
 	dma_addr_t		dma;		/* addr of ED */
 	struct ed		*ed_prev;	/* for non-interrupt EDs */
+	struct td		*dummy;
 
 	u8			type; 		/* PIPE_{BULK,...} */
 	u8			interval;	/* interrupt, isochronous */
@@ -63,24 +64,33 @@ struct ed {
 struct td {
 	/* first fields are hardware-specified, le32 */
 	__u32		hwINFO;		/* transfer info bitmask */
+
+	/* hwINFO bits for both general and iso tds: */
 #define TD_CC       0xf0000000			/* condition code */
 #define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
 //#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_DI       0x00E00000			/* frames before interrupt */
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+	/* these two bits are available for definition/use by HCDs in both
+	 * general and iso tds ... others are available for only one type
+	 */
+//#define TD____	    0x00020000
+#define TD_ISO	    0x00010000			/* copy of ED_ISO */
+
+	/* hwINFO bits for general tds: */
 #define TD_EC       0x0C000000			/* error count */
 #define TD_T        0x03000000			/* data toggle state */
 #define TD_T_DATA0  0x02000000				/* DATA0 */
 #define TD_T_DATA1  0x03000000				/* DATA1 */
 #define TD_T_TOGGLE 0x00000000				/* uses ED_C */
-#define TD_DI       0x00E00000			/* frames before interrupt */
-//#define TD_DI_SET(X) (((X) & 0x07)<< 21)
 #define TD_DP       0x00180000			/* direction/pid */
 #define TD_DP_SETUP 0x00000000			/* SETUP pid */
 #define TD_DP_IN    0x00100000				/* IN pid */
 #define TD_DP_OUT   0x00080000				/* OUT pid */
 							/* 0x00180000 rsvd */
 #define TD_R        0x00040000			/* round: short packets OK? */
-					/* bits 0x1ffff are defined by HCD */
-#define TD_ISO	    0x00010000			/* copy of ED_ISO */
+
+	/* (no hwINFO #defines yet for iso tds) */
 
   	__u32		hwCBP;		/* Current Buffer Pointer (or 0) */
   	__u32		hwNextTD;	/* Next TD Pointer */

drivers/usb/image/hpusbscsi.c

@@ -273,8 +273,6 @@ static int hpusbscsi_scsi_queuecommand (Scsi_Cmnd *srb, scsi_callback callback)
 	usb_urb_callback usb_callback;
 	int res;
 
-	hpusbscsi->use_count++;
-
 	/* we don't answer for anything but our single device on any faked host controller */
 	if ( srb->device->lun || srb->device->id || srb->device->channel ) {
 		if (callback) {
@@ -341,7 +339,6 @@ static int hpusbscsi_scsi_queuecommand (Scsi_Cmnd *srb, scsi_callback callback)
 	}
 
 out:
-	hpusbscsi->use_count--;
 	return 0;
 }
 

drivers/usb/image/hpusbscsi.h

@@ -20,25 +20,25 @@ struct hpusbscsi
         int ep_in;
         int ep_int;
         int interrupt_interval;
-
+	int number;
+	int fragment;
         struct Scsi_Host *host;
-        Scsi_Host_Template ctempl;
-        int number;
+
 	scsi_callback scallback;
 	Scsi_Cmnd *srb;
-	u8 sense_command[SENSE_COMMAND_SIZE];
 
-        int use_count;
+
         wait_queue_head_t pending;
         wait_queue_head_t deathrow;
 
         struct urb *dataurb;
         struct urb *controlurb;
-        int fragment;
+
 
         int state;
         int current_data_pipe;
-
+	Scsi_Host_Template ctempl;
+	u8 sense_command[SENSE_COMMAND_SIZE];
         u8 scsi_state_byte;
 };
 

drivers/usb/media/dabusb.c

@@ -609,6 +609,7 @@ static int dabusb_open (struct inode *inode, struct file *file)
 		down (&s->mutex);
 	}
 	if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) {
+		up(&s->mutex);
 		err("set_interface failed");
 		return -EINVAL;
 	}

drivers/usb/media/pwc-ioctl.h

 #ifndef PWC_IOCTL_H
 #define PWC_IOCTL_H
 
-/* (C) 2001 Nemosoft Unv.    webcam@smcc.demon.nl
+/* (C) 2001-2002 Nemosoft Unv.    webcam@smcc.demon.nl
    
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -18,7 +18,9 @@
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-/*
+/*         This is pwc-ioctl.h belonging to PWC 8.7                        */
+
+/* 
    Changes
    2001/08/03  Alvarado   Added ioctl constants to access methods for 
                           changing white balance and red/blue gains
@@ -52,6 +54,14 @@
 #define PWC_FPS_SNAPSHOT	0x00400000
 
 
+
+struct pwc_probe
+{
+	char name[32];
+	int type;
+};
+
+
 /* pwc_whitebalance.mode values */
 #define PWC_WB_INDOOR		0
 #define PWC_WB_OUTDOOR		1
@@ -63,9 +73,9 @@
    Set mode to one of the PWC_WB_* values above.
    *red and *blue are the respective gains of these colour components inside 
    the camera; range 0..65535
-   When mode == PWC_WB_MANUAL, manual_red and manual_blue are set or read; 
+   When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; 
    otherwise undefined.
-   read_red and read_blue are read-only.
+   'read_red' and 'read_blue' are read-only.
 */   
    
 struct pwc_whitebalance
@@ -75,6 +85,17 @@ struct pwc_whitebalance
 	int read_red, read_blue;	/* R/O */
 };
 
+/* 
+   'control_speed' and 'control_delay' are used in automatic whitebalance mode,
+   and tell the camera how fast it should react to changes in lighting, and 
+   with how much delay. Valid values are 0..65535.
+*/
+struct pwc_wb_speed
+{
+	int control_speed;
+	int control_delay;
+
+};
 
 /* Used with VIDIOCPWC[SG]LED */
 struct pwc_leds
@@ -104,6 +125,19 @@ struct pwc_leds
  /* Get preferred compression quality */
 #define VIDIOCPWCGCQUAL		_IOR('v', 195, int)
 
+
+ /* This is a probe function; since so many devices are supported, it
+    becomes difficult to include all the names in programs that want to
+    check for the enhanced Philips stuff. So in stead, try this PROBE;
+    it returns a structure with the original name, and the corresponding 
+    Philips type.
+    To use, fill the structure with zeroes, call PROBE and if that succeeds,
+    compare the name with that returned from VIDIOCGCAP; they should be the
+    same. If so, you can be assured it is a Philips (OEM) cam and the type
+    is valid.
+ */    
+#define VIDIOCPWCPROBE		_IOR('v', 199, struct pwc_probe)
+
  /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */
 #define VIDIOCPWCSAGC		_IOW('v', 200, int)
  /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */
@@ -115,9 +149,28 @@ struct pwc_leds
 #define VIDIOCPWCSAWB           _IOW('v', 202, struct pwc_whitebalance)
 #define VIDIOCPWCGAWB           _IOR('v', 202, struct pwc_whitebalance)
 
- /* Turn LED on/off ; int range 0..65535 */
+ /* Auto WB speed */
+#define VIDIOCPWCSAWBSPEED	_IOW('v', 203, struct pwc_wb_speed)
+#define VIDIOCPWCGAWBSPEED	_IOR('v', 203, struct pwc_wb_speed)
+
+ /* LEDs on/off/blink; int range 0..65535 */
 #define VIDIOCPWCSLED           _IOW('v', 205, struct pwc_leds)
- /* Get state of LED; int range 0..65535 */
 #define VIDIOCPWCGLED           _IOR('v', 205, struct pwc_leds)
 
+  /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */
+#define VIDIOCPWCSCONTOUR	_IOW('v', 206, int)
+#define VIDIOCPWCGCONTOUR	_IOR('v', 206, int)
+
+  /* Backlight compensation; 0 = off, otherwise on */
+#define VIDIOCPWCSBACKLIGHT	_IOW('v', 207, int)
+#define VIDIOCPWCGBACKLIGHT	_IOR('v', 207, int)
+
+  /* Flickerless mode; = 0 off, otherwise on */
+#define VIDIOCPWCSFLICKER	_IOW('v', 208, int)
+#define VIDIOCPWCGFLICKER	_IOR('v', 208, int)  
+
+  /* Dynamic noise reduction; 0 off, 3 = high noise reduction */
+#define VIDIOCPWCSDYNNOISE	_IOW('v', 209, int)
+#define VIDIOCPWCGDYNNOISE	_IOR('v', 209, int)
+
 #endif

drivers/usb/media/pwc.h

-/* (C) 1999-2001 Nemosoft Unv. (webcam@smcc.demon.nl)
+/* (C) 1999-2002 Nemosoft Unv. (webcam@smcc.demon.nl)
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -60,8 +60,8 @@
 
 /* Version block */
 #define PWC_MAJOR	8
-#define PWC_MINOR	5
-#define PWC_VERSION 	"8.5"
+#define PWC_MINOR	7
+#define PWC_VERSION 	"8.7"
 #define PWC_NAME 	"pwc"
 
 /* Turn certain features on/off */
@@ -247,6 +247,7 @@ extern int pwc_get_saturation(struct pwc_device *pdev);
 extern int pwc_set_saturation(struct pwc_device *pdev, int value);
 extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
 extern int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value);
+extern int pwc_get_cmos_sensor(struct pwc_device *pdev);
 
 /* Power down or up the camera; not supported by all models */
 extern int pwc_camera_power(struct pwc_device *pdev, int power);

drivers/usb/media/se401.c

@@ -1330,7 +1330,13 @@ static int se401_init(struct usb_se401 *se401)
 
 	se401->sizes=cp[4]+cp[5]*256;
 	se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	if (!se401->width)
+		return 1;
 	se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	if (!se401->height) {
+		kfree(se401->width);
+		return 1;
+	}
 	for (i=0; i<se401->sizes; i++) {
 		    se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256;
 		    se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256;

drivers/usb/net/cdc-ether.c

@@ -426,6 +426,7 @@ static void CDC_SetEthernetPacketFilter (ether_dev_t *ether_dev)
 }
 #endif
 
+
 static void CDCEther_set_multicast( struct net_device *net )
 {
 	ether_dev_t *ether_dev = net->priv;