Commit 8b77aeb4 authored by Anton Vorontsov's avatar Anton Vorontsov Committed by Kumar Gala

powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards

The RTC is sitting on the I2C1 bus at address 0x68. RTC interrupt signal
is connected to the IPIC's EXT3 interrupt line.
Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 43c9f434
...@@ -136,6 +136,13 @@ i2c@3000 { ...@@ -136,6 +136,13 @@ i2c@3000 {
interrupts = <14 0x8>; interrupts = <14 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
dfsrr; dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <19 0x8>;
interrupt-parent = <&ipic>;
};
}; };
i2c@3100 { i2c@3100 {
......
...@@ -136,6 +136,13 @@ i2c@3000 { ...@@ -136,6 +136,13 @@ i2c@3000 {
interrupts = <14 0x8>; interrupts = <14 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
dfsrr; dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <19 0x8>;
interrupt-parent = <&ipic>;
};
}; };
i2c@3100 { i2c@3100 {
......
...@@ -136,6 +136,13 @@ i2c@3000 { ...@@ -136,6 +136,13 @@ i2c@3000 {
interrupts = <14 0x8>; interrupts = <14 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
dfsrr; dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <19 0x8>;
interrupt-parent = <&ipic>;
};
}; };
i2c@3100 { i2c@3100 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment