sched/rt: Move rt specific bits into new header file

Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lanSigned-off-by: Ingo Molnar <mingo@kernel.org>

drivers/spi/spi.c

@@ -33,7 +33,7 @@
 #include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/export.h>
-#include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/ioport.h>

drivers/staging/csr/bh.c

@@ -15,7 +15,7 @@
  */
 #include "csr_wifi_hip_unifi.h"
 #include "unifi_priv.h"
-
+#include <linux/sched/rt.h>
 
 /*
  * ---------------------------------------------------------------------------

drivers/staging/csr/unifi_sme.c

@@ -15,7 +15,7 @@
 #include "unifi_priv.h"
 #include "csr_wifi_hip_unifi.h"
 #include "csr_wifi_hip_conversions.h"
-
+#include <linux/sched/rt.h>
 
 
 

drivers/tty/sysrq.c

@@ -15,6 +15,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
 #include <linux/fs.h>

fs/select.c

@@ -26,6 +26,7 @@
 #include <linux/fs.h>
 #include <linux/rcupdate.h>
 #include <linux/hrtimer.h>
+#include <linux/sched/rt.h>
 
 #include <asm/uaccess.h>
 

include/linux/sched.h

@@ -1164,6 +1164,7 @@ struct sched_entity {
 	/* rq "owned" by this entity/group: */
 	struct cfs_rq		*my_q;
 #endif
+
 /*
  * Load-tracking only depends on SMP, FAIR_GROUP_SCHED dependency below may be
  * removed when useful for applications beyond shares distribution (e.g.
@@ -1191,6 +1192,7 @@ struct sched_rt_entity {
 #endif
 };
 
+
 struct rcu_node;
 
 enum perf_event_task_context {
@@ -1596,37 +1598,6 @@ static inline void set_numabalancing_state(bool enabled)
 }
 #endif
 
-/*
- * Priority of a process goes from 0..MAX_PRIO-1, valid RT
- * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
- * tasks are in the range MAX_RT_PRIO..MAX_PRIO-1. Priority
- * values are inverted: lower p->prio value means higher priority.
- *
- * The MAX_USER_RT_PRIO value allows the actual maximum
- * RT priority to be separate from the value exported to
- * user-space.  This allows kernel threads to set their
- * priority to a value higher than any user task. Note:
- * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
- */
-
-#define MAX_USER_RT_PRIO	100
-#define MAX_RT_PRIO		MAX_USER_RT_PRIO
-
-#define MAX_PRIO		(MAX_RT_PRIO + 40)
-#define DEFAULT_PRIO		(MAX_RT_PRIO + 20)
-
-static inline int rt_prio(int prio)
-{
-	if (unlikely(prio < MAX_RT_PRIO))
-		return 1;
-	return 0;
-}
-
-static inline int rt_task(struct task_struct *p)
-{
-	return rt_prio(p->prio);
-}
-
 static inline struct pid *task_pid(struct task_struct *task)
 {
 	return task->pids[PIDTYPE_PID].pid;
@@ -2054,26 +2025,6 @@ static inline void sched_autogroup_fork(struct signal_struct *sig) { }
 static inline void sched_autogroup_exit(struct signal_struct *sig) { }
 #endif
 
-#ifdef CONFIG_RT_MUTEXES
-extern int rt_mutex_getprio(struct task_struct *p);
-extern void rt_mutex_setprio(struct task_struct *p, int prio);
-extern void rt_mutex_adjust_pi(struct task_struct *p);
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
-	return tsk->pi_blocked_on != NULL;
-}
-#else
-static inline int rt_mutex_getprio(struct task_struct *p)
-{
-	return p->normal_prio;
-}
-# define rt_mutex_adjust_pi(p)		do { } while (0)
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
-	return false;
-}
-#endif
-
 extern bool yield_to(struct task_struct *p, bool preempt);
 extern void set_user_nice(struct task_struct *p, long nice);
 extern int task_prio(const struct task_struct *p);
@@ -2703,8 +2654,6 @@ static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
 extern long sched_setaffinity(pid_t pid, const struct cpumask *new_mask);
 extern long sched_getaffinity(pid_t pid, struct cpumask *mask);
 
-extern void normalize_rt_tasks(void);
-
 #ifdef CONFIG_CGROUP_SCHED
 
 extern struct task_group root_task_group;

include/linux/sched/rt.h

+#ifndef _SCHED_RT_H
+#define _SCHED_RT_H
+
+/*
+ * Priority of a process goes from 0..MAX_PRIO-1, valid RT
+ * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
+ * tasks are in the range MAX_RT_PRIO..MAX_PRIO-1. Priority
+ * values are inverted: lower p->prio value means higher priority.
+ *
+ * The MAX_USER_RT_PRIO value allows the actual maximum
+ * RT priority to be separate from the value exported to
+ * user-space.  This allows kernel threads to set their
+ * priority to a value higher than any user task. Note:
+ * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
+ */
+
+#define MAX_USER_RT_PRIO	100
+#define MAX_RT_PRIO		MAX_USER_RT_PRIO
+
+#define MAX_PRIO		(MAX_RT_PRIO + 40)
+#define DEFAULT_PRIO		(MAX_RT_PRIO + 20)
+
+static inline int rt_prio(int prio)
+{
+	if (unlikely(prio < MAX_RT_PRIO))
+		return 1;
+	return 0;
+}
+
+static inline int rt_task(struct task_struct *p)
+{
+	return rt_prio(p->prio);
+}
+
+#ifdef CONFIG_RT_MUTEXES
+extern int rt_mutex_getprio(struct task_struct *p);
+extern void rt_mutex_setprio(struct task_struct *p, int prio);
+extern void rt_mutex_adjust_pi(struct task_struct *p);
+static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
+{
+	return tsk->pi_blocked_on != NULL;
+}
+#else
+static inline int rt_mutex_getprio(struct task_struct *p)
+{
+	return p->normal_prio;
+}
+# define rt_mutex_adjust_pi(p)		do { } while (0)
+static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
+{
+	return false;
+}
+#endif
+
+extern void normalize_rt_tasks(void);
+
+
+#endif /* _SCHED_RT_H */

init/init_task.c

@@ -3,6 +3,7 @@
 #include <linux/mqueue.h>
 #include <linux/sched.h>
 #include <linux/sched/sysctl.h>
+#include <linux/sched/rt.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/mm.h>

kernel/futex.c

@@ -60,6 +60,7 @@
 #include <linux/pid.h>
 #include <linux/nsproxy.h>
 #include <linux/ptrace.h>
+#include <linux/sched/rt.h>
 
 #include <asm/futex.h>
 

kernel/hrtimer.c

@@ -45,6 +45,7 @@
 #include <linux/debugobjects.h>
 #include <linux/sched.h>
 #include <linux/sched/sysctl.h>
+#include <linux/sched/rt.h>
 #include <linux/timer.h>
 
 #include <asm/uaccess.h>

kernel/irq/manage.c

@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include <linux/task_work.h>
 
 #include "internals.h"

kernel/mutex.c

@@ -19,6 +19,7 @@
  */
 #include <linux/mutex.h>
 #include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>

kernel/rtmutex-debug.c

@@ -17,6 +17,7 @@
  * See rt.c in preempt-rt for proper credits and further information
  */
 #include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/spinlock.h>

kernel/rtmutex-tester.c

@@ -10,6 +10,7 @@
 #include <linux/kthread.h>
 #include <linux/export.h>
 #include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
 #include <linux/freezer.h>

kernel/rtmutex.c

@@ -13,6 +13,7 @@
 #include <linux/spinlock.h>
 #include <linux/export.h>
 #include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include <linux/timer.h>
 
 #include "rtmutex_common.h"

kernel/sched/cpupri.c

@@ -28,6 +28,8 @@
  */
 
 #include <linux/gfp.h>
+#include <linux/sched.h>
+#include <linux/sched/rt.h>
 #include "cpupri.h"
 
 /* Convert between a 140 based task->prio, and our 102 based cpupri */

kernel/sched/sched.h

 
 #include <linux/sched.h>
 #include <linux/sched/sysctl.h>
+#include <linux/sched/rt.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <linux/stop_machine.h>

kernel/trace/trace.c

@@ -39,6 +39,7 @@
 #include <linux/poll.h>
 #include <linux/nmi.h>
 #include <linux/fs.h>
+#include <linux/sched/rt.h>
 
 #include "trace.h"
 #include "trace_output.h"

kernel/trace/trace_sched_wakeup.c

@@ -15,8 +15,8 @@
 #include <linux/kallsyms.h>
 #include <linux/uaccess.h>
 #include <linux/ftrace.h>
+#include <linux/sched/rt.h>
 #include <trace/events/sched.h>
-
 #include "trace.h"
 
 static struct trace_array	*wakeup_trace;

kernel/watchdog.c

@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/sysctl.h>
 #include <linux/smpboot.h>
+#include <linux/sched/rt.h>
 
 #include <asm/irq_regs.h>
 #include <linux/kvm_para.h>

mm/page-writeback.c

@@ -35,6 +35,7 @@
 #include <linux/buffer_head.h> /* __set_page_dirty_buffers */
 #include <linux/pagevec.h>
 #include <linux/timer.h>
+#include <linux/sched/rt.h>
 #include <trace/events/writeback.h>
 
 /*

mm/page_alloc.c

@@ -58,6 +58,7 @@
 #include <linux/prefetch.h>
 #include <linux/migrate.h>
 #include <linux/page-debug-flags.h>
+#include <linux/sched/rt.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>