ARM: dts: Karo TX25: Add pinctrl nodes

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

arch/arm/boot/dts/imx25-karo-tx25.dts

@@ -25,16 +25,69 @@ memory {
 	};
 };
 
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
+			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
+			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
+			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
+			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
+			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
+			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
+			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
+			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
+			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
+			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX25_PAD_NF_CE0__NF_CE0		0x80000000
+			MX25_PAD_NFWE_B__NFWE_B		0x80000000
+			MX25_PAD_NFRE_B__NFRE_B		0x80000000
+			MX25_PAD_NFALE__NFALE		0x80000000
+			MX25_PAD_NFCLE__NFCLE		0x80000000
+			MX25_PAD_NFWP_B__NFWP_B		0x80000000
+			MX25_PAD_NFRB__NFRB		0x80000000
+			MX25_PAD_D7__D7			0x80000000
+			MX25_PAD_D6__D6			0x80000000
+			MX25_PAD_D5__D5			0x80000000
+			MX25_PAD_D4__D4			0x80000000
+			MX25_PAD_D3__D3			0x80000000
+			MX25_PAD_D2__D2			0x80000000
+			MX25_PAD_D1__D1			0x80000000
+			MX25_PAD_D0__D0			0x80000000
+		>;
+	};
+};
+
 &uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	status = "okay";
 };
 
 &nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
 	nand-on-flash-bbt;
 	status = "okay";
 };