Skip to content

L
linux
Commit 8d71e075 authored by Mike Frysinger's avatar Mike Frysinger
Browse files
Options

Blackfin: drop unused MMR defines that only cause bad code to be written 

Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 61f09b5a
Show whitespace changes
Inline Side-by-side
Showing with 12 additions and 228 deletions
arch/blackfin/mach-bf518/include/mach/blackfin.h
View file @ 8d71e075
......@@ -68,11 +68,6 @@
#endif
#endif
/* UART_IIR Register */
#define STATUS(x) ((x << 1) & 0x06)
#define STATUS_P1 0x02
#define STATUS_P0 0x01
#define BFIN_UART_NR_PORTS 2
#define OFFSET_THR 0x00 /* Transmit Holding register */
......@@ -88,11 +83,6 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
/* DPMC*/
#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
#define STOPCK_OFF STOPCK
/* PLL_DIV Masks */
#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
......
arch/blackfin/mach-bf527/include/mach/blackfin.h
View file @ 8d71e075
......@@ -56,11 +56,6 @@
#endif
#endif
/* UART_IIR Register */
#define STATUS(x) ((x << 1) & 0x06)
#define STATUS_P1 0x02
#define STATUS_P0 0x01
#define BFIN_UART_NR_PORTS 2
#define OFFSET_THR 0x00 /* Transmit Holding register */
......@@ -76,11 +71,6 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
/* DPMC*/
#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
#define STOPCK_OFF STOPCK
/* PLL_DIV Masks */
#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
......
arch/blackfin/mach-bf533/dma.c
View file @ 8d71e075
......@@ -76,12 +76,12 @@ int channel2irq(unsigned int channel)
ret_irq = IRQ_SPI;
break;
case CH_UART_RX:
ret_irq = IRQ_UART_RX;
case CH_UART0_RX:
ret_irq = IRQ_UART0_RX;
break;
case CH_UART_TX:
ret_irq = IRQ_UART_TX;
case CH_UART0_TX:
ret_irq = IRQ_UART0_TX;
break;
case CH_MEM_STREAM0_SRC:
......
arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
View file @ 8d71e075
......@@ -131,11 +131,11 @@ struct bfin_serial_res {
struct bfin_serial_res bfin_serial_resource[] = {
{
0xFFC00400,
IRQ_UART_RX,
IRQ_UART_ERROR,
IRQ_UART0_RX,
IRQ_UART0_ERROR,
#ifdef CONFIG_SERIAL_BFIN_DMA
CH_UART_TX,
CH_UART_RX,
CH_UART0_TX,
CH_UART0_RX,
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
......
arch/blackfin/mach-bf533/include/mach/blackfin.h
View file @ 8d71e075
......@@ -43,13 +43,6 @@
#define BFIN_UART_NR_PORTS 1
#define CH_UART_RX CH_UART0_RX
#define CH_UART_TX CH_UART0_TX
#define IRQ_UART_ERROR IRQ_UART0_ERROR
#define IRQ_UART_RX IRQ_UART0_RX
#define IRQ_UART_TX IRQ_UART0_TX
#define OFFSET_THR 0x00 /* Transmit Holding register */
#define OFFSET_RBR 0x00 /* Receive Buffer register */
#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
......
arch/blackfin/mach-bf537/dma.c
View file @ 8d71e075
......@@ -96,12 +96,12 @@ int channel2irq(unsigned int channel)
ret_irq = IRQ_SPI;
break;
case CH_UART_RX:
ret_irq = IRQ_UART_RX;
case CH_UART0_RX:
ret_irq = IRQ_UART0_RX;
break;
case CH_UART_TX:
ret_irq = IRQ_UART_TX;
case CH_UART0_TX:
ret_irq = IRQ_UART0_TX;
break;
case CH_MEM_STREAM0_SRC:
......
arch/blackfin/mach-bf537/include/mach/blackfin.h
View file @ 8d71e075
......@@ -45,96 +45,11 @@
#if !defined(__ASSEMBLY__)
#include "cdefBF534.h"
/* UART 0*/
#define bfin_read_UART_THR() bfin_read_UART0_THR()
#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
#define bfin_read_UART_IER() bfin_read_UART0_IER()
#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
#include "cdefBF537.h"
#endif
#endif
/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */
/* UART_IIR Register */
#define STATUS(x) ((x << 1) & 0x06)
#define STATUS_P1 0x02
#define STATUS_P0 0x01
/* DMA Channel */
#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
#define CH_UART_RX CH_UART0_RX
#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX()
#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val)
#define CH_UART_TX CH_UART0_TX
/* System Interrupt Controller */
#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX()
#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val)
#define IRQ_UART_RX IRQ_UART0_RX
#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX()
#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val)
#define IRQ_UART_TX IRQ_UART0_TX
#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR()
#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val)
#define IRQ_UART_ERROR IRQ_UART0_ERROR
/* MMR Registers*/
#define bfin_read_UART_THR() bfin_read_UART0_THR()
#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
#define BFIN_UART_THR UART0_THR
#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
#define BFIN_UART_RBR UART0_RBR
#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
#define BFIN_UART_DLL UART0_DLL
#define bfin_read_UART_IER() bfin_read_UART0_IER()
#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
#define BFIN_UART_IER UART0_IER
#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
#define BFIN_UART_DLH UART0_DLH
#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
#define BFIN_UART_IIR UART0_IIR
#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
#define BFIN_UART_LCR UART0_LCR
#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
#define BFIN_UART_MCR UART0_MCR
#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
#define BFIN_UART_LSR UART0_LSR
#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
#define BFIN_UART_SCR UART0_SCR
#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
#define BFIN_UART_GCTL UART0_GCTL
#define BFIN_UART_NR_PORTS 2
#define OFFSET_THR 0x00 /* Transmit Holding register */
......@@ -150,11 +65,6 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
/* DPMC*/
#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
#define STOPCK_OFF STOPCK
/* PLL_DIV Masks */
#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
......
arch/blackfin/mach-bf538/include/mach/blackfin.h
View file @ 8d71e075
......@@ -47,11 +47,6 @@
#endif
#endif
/* UART_IIR Register */
#define STATUS(x) ((x << 1) & 0x06)
#define STATUS_P1 0x02
#define STATUS_P0 0x01
#define BFIN_UART_NR_PORTS 3
#define OFFSET_THR 0x00 /* Transmit Holding register */
......@@ -67,11 +62,6 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
/* DPMC*/
#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
#define STOPCK_OFF STOPCK
/* PLL_DIV Masks */
#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
......
arch/blackfin/mach-bf548/include/mach/blackfin.h
View file @ 8d71e075
......@@ -72,97 +72,8 @@
#include "cdefBF549.h"
#endif
/* UART 1*/
#define bfin_read_UART_THR() bfin_read_UART1_THR()
#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val)
#define bfin_read_UART_RBR() bfin_read_UART1_RBR()
#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val)
#define bfin_read_UART_DLL() bfin_read_UART1_DLL()
#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val)
#define bfin_read_UART_IER() bfin_read_UART1_IER()
#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val)
#define bfin_read_UART_DLH() bfin_read_UART1_DLH()
#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val)
#define bfin_read_UART_IIR() bfin_read_UART1_IIR()
#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val)
#define bfin_read_UART_LCR() bfin_read_UART1_LCR()
#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val)
#define bfin_read_UART_MCR() bfin_read_UART1_MCR()
#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val)
#define bfin_read_UART_LSR() bfin_read_UART1_LSR()
#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val)
#define bfin_read_UART_SCR() bfin_read_UART1_SCR()
#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val)
#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL()
#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val)
#endif
/* MAP used DEFINES from BF533 to BF54x - so we don't need to change
* them in the driver, kernel, etc. */
/* UART_IIR Register */
#define STATUS(x) ((x << 1) & 0x06)
#define STATUS_P1 0x02
#define STATUS_P0 0x01
/* UART 0*/
/* DMA Channel */
#define bfin_read_CH_UART_RX() bfin_read_CH_UART1_RX()
#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART1_RX(val)
#define bfin_read_CH_UART_TX() bfin_read_CH_UART1_TX()
#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART1_TX(val)
#define CH_UART_RX CH_UART1_RX
#define CH_UART_TX CH_UART1_TX
/* System Interrupt Controller */
#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART1_RX()
#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART1_RX(val)
#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART1_TX()
#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART1_TX(val)
#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART1_ERROR()
#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART1_ERROR(val)
#define IRQ_UART_RX IRQ_UART1_RX
#define IRQ_UART_TX IRQ_UART1_TX
#define IRQ_UART_ERROR IRQ_UART1_ERROR
/* MMR Registers*/
#define bfin_read_UART_THR() bfin_read_UART1_THR()
#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val)
#define bfin_read_UART_RBR() bfin_read_UART1_RBR()
#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val)
#define bfin_read_UART_DLL() bfin_read_UART1_DLL()
#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val)
#define bfin_read_UART_IER() bfin_read_UART1_IER()
#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val)
#define bfin_read_UART_DLH() bfin_read_UART1_DLH()
#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val)
#define bfin_read_UART_IIR() bfin_read_UART1_IIR()
#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val)
#define bfin_read_UART_LCR() bfin_read_UART1_LCR()
#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val)
#define bfin_read_UART_MCR() bfin_read_UART1_MCR()
#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val)
#define bfin_read_UART_LSR() bfin_read_UART1_LSR()
#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val)
#define bfin_read_UART_SCR() bfin_read_UART1_SCR()
#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val)
#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL()
#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val)
#define BFIN_UART_THR UART1_THR
#define BFIN_UART_RBR UART1_RBR
#define BFIN_UART_DLL UART1_DLL
#define BFIN_UART_IER UART1_IER
#define BFIN_UART_DLH UART1_DLH
#define BFIN_UART_IIR UART1_IIR
#define BFIN_UART_LCR UART1_LCR
#define BFIN_UART_MCR UART1_MCR
#define BFIN_UART_LSR UART1_LSR
#define BFIN_UART_SCR UART1_SCR
#define BFIN_UART_GCTL UART1_GCTL
#define BFIN_UART_NR_PORTS 4
#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7