Commit 8d9f014a authored by Finn Thain's avatar Finn Thain Committed by Geert Uytterhoeven

m68k/mac: enable via_alt_mapping on performa 580

Enable via_alt_mapping on the Performa 588 and tidy up related documentation.

I'm betting that remapped IRQs work just fine on the Performa 580 series since it works on the LC 630 and the logic board part numbers are reputedly the same.

And the consensus seems to be that the Mac TV is essentially a Performa 550, not dissimilar to the Performa 520, so set the via_type accordingly.
Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
parent ed04c97d
...@@ -594,7 +594,7 @@ static struct mac_model mac_data_table[] = { ...@@ -594,7 +594,7 @@ static struct mac_model mac_data_table[] = {
.ident = MAC_MODEL_TV, .ident = MAC_MODEL_TV,
.name = "TV", .name = "TV",
.adb_type = MAC_ADB_CUDA, .adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_QUADRA, .via_type = MAC_VIA_IIci,
.scsi_type = MAC_SCSI_OLD, .scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II, .scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS, .nubus_type = MAC_NUBUS,
......
...@@ -42,6 +42,18 @@ ...@@ -42,6 +42,18 @@
* *
* 6 - off switch (?) * 6 - off switch (?)
* *
* Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
* an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
* sound out to their own autovector IRQs and gives VIA1 a higher priority:
*
* 1 - unused (?)
*
* 3 - on-board SONIC
*
* 5 - Apple Sound Chip (ASC)
*
* 6 - VIA1
*
* For OSS Macintoshes (IIfx only at this point): * For OSS Macintoshes (IIfx only at this point):
* *
* 3 - Nubus interrupt * 3 - Nubus interrupt
......
...@@ -194,38 +194,17 @@ void __init via_init(void) ...@@ -194,38 +194,17 @@ void __init via_init(void)
if (oss_present) if (oss_present)
return; return;
/* Some machines support an alternate IRQ mapping that spreads */ if ((macintosh_config->via_type == MAC_VIA_QUADRA) &&
/* Ethernet and Sound out to their own autolevel IRQs and moves */ (macintosh_config->adb_type != MAC_ADB_PB1) &&
/* VIA1 to level 6. A/UX uses this mapping and we do too. Note */ (macintosh_config->adb_type != MAC_ADB_PB2) &&
/* that the IIfx emulates this alternate mapping using the OSS. */ (macintosh_config->ident != MAC_MODEL_C660) &&
(macintosh_config->ident != MAC_MODEL_Q840)) {
via_alt_mapping = 0; via_alt_mapping = 1;
if (macintosh_config->via_type == MAC_VIA_QUADRA) via1[vDirB] |= 0x40;
switch (macintosh_config->ident) { via1[vBufB] &= ~0x40;
case MAC_MODEL_C660: } else {
case MAC_MODEL_Q840: via_alt_mapping = 0;
/* not applicable */ }
break;
case MAC_MODEL_P588:
case MAC_MODEL_TV:
case MAC_MODEL_PB140:
case MAC_MODEL_PB145:
case MAC_MODEL_PB160:
case MAC_MODEL_PB165:
case MAC_MODEL_PB165C:
case MAC_MODEL_PB170:
case MAC_MODEL_PB180:
case MAC_MODEL_PB180C:
case MAC_MODEL_PB190:
case MAC_MODEL_PB520:
/* not yet tested */
break;
default:
via_alt_mapping = 1;
via1[vDirB] |= 0x40;
via1[vBufB] &= ~0x40;
break;
}
/* /*
* Now initialize VIA2. For RBV we just kill all interrupts; * Now initialize VIA2. For RBV we just kill all interrupts;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment