sh: modify platform_device for sh_eth driver

A new parameter is added to sh_eth_plat_data. And the sh_eth driver
needs additional memory resource if a module has TSU.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/board-espt.c

@@ -66,6 +66,11 @@ static struct resource sh_eth_resources[] = {
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
 	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
+	}, {
+
 		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
 	},
@@ -74,6 +79,8 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh7763_eth_pdata = {
 	.phy = 0,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_GIGABIT,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
 static struct platform_device espt_eth_device = {

arch/sh/boards/mach-ecovec24/setup.c

@@ -142,6 +142,8 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_FAST_SH4,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
 	.ether_link_active_low = 1
 };
 

arch/sh/boards/mach-sh7763rdp/setup.c

@@ -74,6 +74,10 @@ static struct resource sh_eth_resources[] = {
 		.start  = 0xFEE00800,   /* use eth1 */
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
 	}, {
 		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
@@ -83,6 +87,8 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh7763_eth_pdata = {
 	.phy = 1,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.register_type = SH_ETH_REG_GIGABIT,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
 static struct platform_device sh7763rdp_eth_device = {